{"title":"Hardrace Hyundai Genesis Coupe Suspension Parts","description":"\u003cp\u003eHardrace \u003ca href=\"\/collections\/hardrace-hyundai-suspension-components\"\u003eHyundai\u003c\/a\u003e Genesis Coupe suspension parts for the 2008-2016 coupe: spherical adjustable rear toe, trailing and upper arms and front lower arm, a hardened rubber rear camber kit and toe kit, 28mm front and adjustable 22mm rear anti roll bars, engine mounts for the 2.0 Turbo and 3.8, transmission mounts and an RC tie rod end.\u003c\/p\u003e\u003cp\u003eOn a lowered Genesis Coupe the spherical arms let you set camber and toe precisely and remove the slop of rubber bushes, at the cost of road noise; the hardened rubber kits do the same job more quietly for a road car. The hardened \u003ca href=\"\/collections\/hardrace-engine-mounts\"\u003eengine and transmission mounts\u003c\/a\u003e (including 6AT and 8AT rear mounts) stop the drivetrain shifting under power, and the RC tie rod end corrects bump steer after lowering. Free UK delivery over £100.\u003c\/p\u003e","products":[{"product_id":"hardrace-adjustable-front-lower-arm-with-spherical-bearings-2pc-set-hyundai-genesis-coupe-09-12","title":"Hardrace Adjustable Front Lower Arm With Spherical Bearings Hyundai 08-16","description":"\u003ch2\u003eHardrace Adjustable Front Lower Arms Pillow Ball for Hyundai Genesis BH (2008-2016) – Adjustable Geometry, Sharper Handling\u003c\/h2\u003e\n\u003cp\u003eFactory control arms are built for comfort, with soft rubber bushes that let the wheel move around under cornering, braking and acceleration. These Hardrace front lower arms are an upgrade over the factory parts. Each one locates the suspension far more firmly, so the car feels sharper and more consistent through corners and over bumps.\u003c\/p\u003e\n\u003cp\u003eThey use pillow ball (spherical) joints, which give precise, direct feedback with no rubber deflection. The length is adjustable, so you can fine-tune the geometry.\u003c\/p\u003e\n\u003cp\u003eIt suits the Hyundai Genesis (1st Gen) 2008-2016.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer suspension location than the factory arms\u003c\/li\u003e\n\u003cli\u003eSharper, more consistent handling\u003c\/li\u003e\n\u003cli\u003eAdjustable length to fine-tune the geometry\u003c\/li\u003e\n\u003cli\u003ePillow ball joints for zero deflection\u003c\/li\u003e\n\u003cli\u003eHigh-strength steel construction\u003c\/li\u003e\n\u003cli\u003eSupplied complete with bushes or joints fitted, so no press is needed\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront lower arms (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Sedan (BH) 2008-2014 \/ Genesis 3.3 2008-2014\u003c\/li\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Sedan (BH) 2008-2014 \/ Genesis 3.8 2008-2014\u003c\/li\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Coupe 2008-2016 \/ Genesis Coupe 2.0 Turbo 2008-2012\u003c\/li\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Coupe 2008-2016 \/ Genesis Coupe 2.0 Turbo 2012-2016\u003c\/li\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Coupe 2008-2016 \/ Genesis Coupe 3.8 2008-2012\u003c\/li\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Coupe 2008-2016 \/ Genesis Coupe 3.8 2012-2016\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on axle stands or a ramp. Remove the factory arm and bolt the Hardrace arm in its place; it comes complete with its bushes or joints fitted, so no press is needed. Set adjustable arms to the same length as the factory parts to start. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-rear-toe-kit-with-hardened-rubber-bushes-2pc-set-hyundai-coupe-09-12\"\u003eHardrace Adjustable Rear Toe Kit With Hardened Rubber Bushes 2Pc Set Hyundai Coupe 09-12\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-rear-toe-control-arm-with-spherical-bearings-2pc-set-hyundai-genesis-coupe-09-12\"\u003eHardrace Adjustable Rear Toe Control Arm With Spherical Bearings 2Pc Set Hyundai Genesis C\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-rear-upper-arm-with-spherical-bearings-2pc-set-hyundai-genesis-coupe-09-12\"\u003eHardrace Adjustable Rear Upper Arm With Spherical Bearings 2Pc Set Hyundai Genesis Coupe 0\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes. Have a full four-wheel alignment done after fitting, and use it to set the adjustable arms to the settings you want.\u003c\/p\u003e\n\u003ch3\u003eDoes it come with the bushes fitted?\u003c\/h3\u003e\n\u003cp\u003eYes. The arm comes complete with its bushes or joints already fitted, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003ePillow ball joints pass on a little more noise and vibration than rubber bushes, but there is no rubber flex, so the handling is far more precise.\u003c\/p\u003e\n\u003ch3\u003eHow is it adjusted?\u003c\/h3\u003e\n\u003cp\u003eThe arm length is set with the adjuster and locked with lock nuts. Set it to the factory length first, then fine-tune it during the alignment.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780012962104,"sku":"HR-7209","price":354.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20161181375413i7x54bi.jpg?v=1678898095"},{"product_id":"hardrace-adjustable-rear-camber-kit-with-hardened-rubber-bushes-2pc-set-hyundai-coupe-09-12","title":"Hardrace Rear Camber Kit Hardened Rubber Hyundai Genesis Coupe 09-12","description":"\u003ch2\u003eHardrace Rear Camber Kit Pillow Ball for Hyundai Genesis (2008-2016) – Adjustable Camber, More Grip\u003c\/h2\u003e\n\u003cp\u003eLowering a car pulls in negative camber that the factory arms can't correct, which wears the inner edge of the tyres and costs grip. This Hardrace rear camber kit is an upgrade over the factory arms. It lets you set camber exactly where you want it, so the tyres wear evenly and grip better.\u003c\/p\u003e\n\u003cp\u003eThe arms use pillow ball (spherical) joints, which give precise, direct feedback with no rubber deflection.\u003c\/p\u003e\n\u003cp\u003eIt suits the Hyundai Genesis (1st Gen) 2008-2016.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable camber\u003c\/li\u003e\n\u003cli\u003eCorrects camber after lowering for even tyre wear\u003c\/li\u003e\n\u003cli\u003ePillow ball joints for zero deflection\u003c\/li\u003e\n\u003cli\u003eHigh-strength steel construction\u003c\/li\u003e\n\u003cli\u003eSupplied complete with bushes or joints fitted, so no press is needed\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear camber arms (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Coupe 2008-2016 \/ Genesis Coupe 2.0 Turbo 2008-2012\u003c\/li\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Coupe 2008-2016 \/ Genesis Coupe 2.0 Turbo 2012-2016\u003c\/li\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Coupe 2008-2016 \/ Genesis Coupe 3.8 2008-2012\u003c\/li\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Coupe 2008-2016 \/ Genesis Coupe 3.8 2012-2016\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on axle stands or a ramp. Remove the factory arm and bolt the Hardrace arm in its place; it comes complete with its bushes or joints fitted, so no press is needed. Set adjustable arms to the same length as the factory parts to start. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-rear-toe-kit-with-hardened-rubber-bushes-2pc-set-hyundai-coupe-09-12\"\u003eHardrace Adjustable Rear Toe Kit With Hardened Rubber Bushes 2Pc Set Hyundai Coupe 09-12\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-rear-toe-control-arm-with-spherical-bearings-2pc-set-hyundai-genesis-coupe-09-12\"\u003eHardrace Adjustable Rear Toe Control Arm With Spherical Bearings 2Pc Set Hyundai Genesis C\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-rear-upper-arm-with-spherical-bearings-2pc-set-hyundai-genesis-coupe-09-12\"\u003eHardrace Adjustable Rear Upper Arm With Spherical Bearings 2Pc Set Hyundai Genesis Coupe 0\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes. Have a full four-wheel alignment done after fitting, and use it to set the adjustable arms to the settings you want.\u003c\/p\u003e\n\u003ch3\u003eDoes it come with the bushes fitted?\u003c\/h3\u003e\n\u003cp\u003eYes. The arm comes complete with its bushes or joints already fitted, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003ePillow ball joints pass on a little more noise and vibration than rubber bushes, but there is no rubber flex, so the handling is far more precise.\u003c\/p\u003e\n\u003ch3\u003eHow much camber should I run?\u003c\/h3\u003e\n\u003cp\u003eFor road use, stay close to the manufacturer's figures or slightly more negative. Track cars often run more, but this increases inner tyre wear on the road.\u003c\/p\u003e\n\u003ch3\u003eDo I need it on a standard-height car?\u003c\/h3\u003e\n\u003cp\u003eIt is most useful on lowered cars, where it brings the geometry back into spec. On a standard car it still gives firmer location and finer adjustment than the factory parts.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780013420856,"sku":"HR-8764","price":319.26,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/2016122715305615c30n56qn.jpg?v=1678898097"},{"product_id":"hardrace-adjustable-rear-toe-control-arm-with-spherical-bearings-2pc-set-hyundai-genesis-coupe-09-12","title":"Hardrace Adjustable Rear Toe Control Arm Spherical Hyundai 08-16","description":"\u003ch2\u003eHardrace Rear Toe Control Arms Pillow Ball for Hyundai Genesis (2008-2016) – Adjustable Toe, Firmer Location\u003c\/h2\u003e\n\u003cp\u003eToe has a big effect on stability and tyre wear, and lowering a car often pulls it out of spec with no factory adjustment to bring it back. These Hardrace rear toe control arms are an upgrade over the factory parts. Each one gives you precise toe adjustment so you can bring the rear alignment back where it should be.\u003c\/p\u003e\n\u003cp\u003eThey use pillow ball (spherical) joints, which give precise, direct feedback with no rubber deflection.\u003c\/p\u003e\n\u003cp\u003eIt suits the Hyundai Genesis (1st Gen) 2008-2016.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable rear toe\u003c\/li\u003e\n\u003cli\u003eBrings toe back into spec on lowered cars\u003c\/li\u003e\n\u003cli\u003ePillow ball joints for zero deflection\u003c\/li\u003e\n\u003cli\u003eHigh-strength steel construction\u003c\/li\u003e\n\u003cli\u003eSupplied complete with bushes or joints fitted, so no press is needed\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear toe control arms (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Coupe 2008-2016 \/ Genesis Coupe 2.0 Turbo 2008-2012\u003c\/li\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Coupe 2008-2016 \/ Genesis Coupe 2.0 Turbo 2012-2016\u003c\/li\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Coupe 2008-2016 \/ Genesis Coupe 3.8 2008-2012\u003c\/li\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Coupe 2008-2016 \/ Genesis Coupe 3.8 2012-2016\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on axle stands or a ramp. Remove the factory arm and bolt the Hardrace arm in its place; it comes complete with its bushes or joints fitted, so no press is needed. Set adjustable arms to the same length as the factory parts to start. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-rear-toe-kit-with-hardened-rubber-bushes-2pc-set-hyundai-coupe-09-12\"\u003eHardrace Adjustable Rear Toe Kit With Hardened Rubber Bushes 2Pc Set Hyundai Coupe 09-12\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-rear-upper-arm-with-spherical-bearings-2pc-set-hyundai-genesis-coupe-09-12\"\u003eHardrace Adjustable Rear Upper Arm With Spherical Bearings 2Pc Set Hyundai Genesis Coupe 0\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-rear-trailing-arm-with-spherical-bearings-2pc-set-hyundai-genesis-coupe-09-12\"\u003eHardrace Adjustable Rear Trailing Arm With Spherical Bearings 2Pc Set Hyundai Genesis Coup\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes. Have a full four-wheel alignment done after fitting, and use it to set the adjustable arms to the settings you want.\u003c\/p\u003e\n\u003ch3\u003eDoes it come with the bushes fitted?\u003c\/h3\u003e\n\u003cp\u003eYes. The arm comes complete with its bushes or joints already fitted, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003ePillow ball joints pass on a little more noise and vibration than rubber bushes, but there is no rubber flex, so the handling is far more precise.\u003c\/p\u003e\n\u003ch3\u003eDoes toe affect stability?\u003c\/h3\u003e\n\u003cp\u003eYes. Rear toe has a big effect on how settled the car feels, especially at speed and under braking, so getting it right makes the car feel more planted.\u003c\/p\u003e\n\u003ch3\u003eHow is toe adjusted?\u003c\/h3\u003e\n\u003cp\u003eTurn the adjuster to change the arm length, then lock it with the lock nut. Set it to the factory length first, then have the toe set on an alignment rig.\u003c\/p\u003e\n\u003ch3\u003eDo I need it on a standard-height car?\u003c\/h3\u003e\n\u003cp\u003eIt is most useful on lowered cars, where it brings the geometry back into spec. On a standard car it still gives firmer location and finer adjustment than the factory parts.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780013453624,"sku":"HR-7205","price":279.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201842015244615f24d46qu.jpg?v=1678898098"},{"product_id":"hardrace-adjustable-rear-toe-kit-with-hardened-rubber-bushes-2pc-set-hyundai-coupe-09-12","title":"Hardrace Adjustable Rear Toe Kit Hardened Rubber Hyundai Coupe 08-16","description":"\u003ch2\u003eHardrace Rear Toe Kit Hardened Rubber for Hyundai Genesis BH (2008-2016) – Adjustable Toe, Firmer Location\u003c\/h2\u003e\n\u003cp\u003eToe has a big effect on stability and tyre wear, and lowering a car often pulls it out of spec with no factory adjustment to bring it back. This Hardrace rear toe kit is an upgrade over the factory arms. It gives you precise toe adjustment so you can bring the rear alignment back where it should be.\u003c\/p\u003e\n\u003cp\u003eThe arms use hardened rubber bushes, a high-strength, anti-crack compound that is firmer than the factory bushes but still absorbs vibration.\u003c\/p\u003e\n\u003cp\u003eIt suits the Hyundai Genesis (1st Gen) 2008-2016.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable rear toe\u003c\/li\u003e\n\u003cli\u003eBrings toe back into spec on lowered cars\u003c\/li\u003e\n\u003cli\u003eHardened rubber bushes for firm, quiet control\u003c\/li\u003e\n\u003cli\u003eHigh-strength steel construction\u003c\/li\u003e\n\u003cli\u003eSupplied complete with bushes or joints fitted, so no press is needed\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear toe arms (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Sedan (BH) 2008-2014 \/ Genesis 3.3 2008-2014\u003c\/li\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Sedan (BH) 2008-2014 \/ Genesis 3.8 2008-2014\u003c\/li\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Coupe 2008-2016 \/ Genesis Coupe 2.0 Turbo 2008-2012\u003c\/li\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Coupe 2008-2016 \/ Genesis Coupe 2.0 Turbo 2012-2016\u003c\/li\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Coupe 2008-2016 \/ Genesis Coupe 3.8 2008-2012\u003c\/li\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Coupe 2008-2016 \/ Genesis Coupe 3.8 2012-2016\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on axle stands or a ramp. Remove the factory arm and bolt the Hardrace arm in its place; it comes complete with its bushes or joints fitted, so no press is needed. Set adjustable arms to the same length as the factory parts to start. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-rear-toe-control-arm-with-spherical-bearings-2pc-set-hyundai-genesis-coupe-09-12\"\u003eHardrace Adjustable Rear Toe Control Arm With Spherical Bearings 2Pc Set Hyundai Genesis C\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-rear-upper-arm-with-spherical-bearings-2pc-set-hyundai-genesis-coupe-09-12\"\u003eHardrace Adjustable Rear Upper Arm With Spherical Bearings 2Pc Set Hyundai Genesis Coupe 0\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-rear-trailing-arm-with-spherical-bearings-2pc-set-hyundai-genesis-coupe-09-12\"\u003eHardrace Adjustable Rear Trailing Arm With Spherical Bearings 2Pc Set Hyundai Genesis Coup\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes. Have a full four-wheel alignment done after fitting, and use it to set the adjustable arms to the settings you want.\u003c\/p\u003e\n\u003ch3\u003eDoes it come with the bushes fitted?\u003c\/h3\u003e\n\u003cp\u003eYes. The arm comes complete with its bushes or joints already fitted, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eOnly slightly. The hardened rubber is firmer than the factory bushes but still absorbs vibration, so it stays comfortable for everyday driving.\u003c\/p\u003e\n\u003ch3\u003eDoes toe affect stability?\u003c\/h3\u003e\n\u003cp\u003eYes. Rear toe has a big effect on how settled the car feels, especially at speed and under braking, so getting it right makes the car feel more planted.\u003c\/p\u003e\n\u003ch3\u003eHow is toe adjusted?\u003c\/h3\u003e\n\u003cp\u003eTurn the adjuster to change the arm length, then lock it with the lock nut. Set it to the factory length first, then have the toe set on an alignment rig.\u003c\/p\u003e\n\u003ch3\u003eDo I need it on a standard-height car?\u003c\/h3\u003e\n\u003cp\u003eIt is most useful on lowered cars, where it brings the geometry back into spec. On a standard car it still gives firmer location and finer adjustment than the factory parts.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780013486392,"sku":"HR-8602","price":159.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20164291785317h8b53ox.jpg?v=1678898098"},{"product_id":"hardrace-adjustable-rear-trailing-arm-with-spherical-bearings-2pc-set-hyundai-genesis-coupe-09-12","title":"Hardrace Adjustable Rear Trailing Arm With Spherical Bearings Hyundai 08-16","description":"\u003ch2\u003eHardrace Adjustable Rear Trailing Arms Pillow Ball for Hyundai Genesis (2008-2016) – Adjustable Geometry, Sharper Handling\u003c\/h2\u003e\n\u003cp\u003eThe trailing arms locate the rear wheels front to back, and soft factory bushes let them move under power and braking. These Hardrace rear trailing arms are an upgrade over the factory parts. Each one locates the suspension far more firmly, so the car feels sharper and more consistent through corners and over bumps.\u003c\/p\u003e\n\u003cp\u003eThey use pillow ball (spherical) joints, which give precise, direct feedback with no rubber deflection. The length is adjustable, so you can fine-tune the geometry.\u003c\/p\u003e\n\u003cp\u003eIt suits the Hyundai Genesis (1st Gen) 2008-2016.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer suspension location than the factory arms\u003c\/li\u003e\n\u003cli\u003eSharper, more consistent handling\u003c\/li\u003e\n\u003cli\u003eAdjustable length to fine-tune the geometry\u003c\/li\u003e\n\u003cli\u003ePillow ball joints for zero deflection\u003c\/li\u003e\n\u003cli\u003eHigh-strength steel construction\u003c\/li\u003e\n\u003cli\u003eSupplied complete with bushes or joints fitted, so no press is needed\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear trailing arms (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Coupe 2008-2016 \/ Genesis Coupe 2.0 Turbo 2008-2012\u003c\/li\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Coupe 2008-2016 \/ Genesis Coupe 2.0 Turbo 2012-2016\u003c\/li\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Coupe 2008-2016 \/ Genesis Coupe 3.8 2008-2012\u003c\/li\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Coupe 2008-2016 \/ Genesis Coupe 3.8 2012-2016\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on axle stands or a ramp. Remove the factory arm and bolt the Hardrace arm in its place; it comes complete with its bushes or joints fitted, so no press is needed. Set adjustable arms to the same length as the factory parts to start. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-rear-toe-kit-with-hardened-rubber-bushes-2pc-set-hyundai-coupe-09-12\"\u003eHardrace Adjustable Rear Toe Kit With Hardened Rubber Bushes 2Pc Set Hyundai Coupe 09-12\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-rear-toe-control-arm-with-spherical-bearings-2pc-set-hyundai-genesis-coupe-09-12\"\u003eHardrace Adjustable Rear Toe Control Arm With Spherical Bearings 2Pc Set Hyundai Genesis C\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-rear-upper-arm-with-spherical-bearings-2pc-set-hyundai-genesis-coupe-09-12\"\u003eHardrace Adjustable Rear Upper Arm With Spherical Bearings 2Pc Set Hyundai Genesis Coupe 0\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes. Have a full four-wheel alignment done after fitting, and use it to set the adjustable arms to the settings you want.\u003c\/p\u003e\n\u003ch3\u003eDoes it come with the bushes fitted?\u003c\/h3\u003e\n\u003cp\u003eYes. The arm comes complete with its bushes or joints already fitted, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003ePillow ball joints pass on a little more noise and vibration than rubber bushes, but there is no rubber flex, so the handling is far more precise.\u003c\/p\u003e\n\u003ch3\u003eHow is it adjusted?\u003c\/h3\u003e\n\u003cp\u003eThe arm length is set with the adjuster and locked with lock nuts. Set it to the factory length first, then fine-tune it during the alignment.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780013551928,"sku":"HR-7204","price":279.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/2018103013303613a30j36tw.jpg?v=1678898098"},{"product_id":"hardrace-adjustable-rear-upper-arm-with-spherical-bearings-2pc-set-hyundai-genesis-coupe-09-12","title":"Hardrace Adjustable Rear Upper Arm Spherical Hyundai Genesis 08-16","description":"\u003ch2\u003eHardrace Adjustable Rear Upper Arms Pillow Ball for Hyundai Genesis (2008-2016) – Adjustable Geometry, Sharper Handling\u003c\/h2\u003e\n\u003cp\u003eFactory control arms are built for comfort, with soft rubber bushes that let the wheel move around under cornering, braking and acceleration. These Hardrace rear upper arms are an upgrade over the factory parts. Each one locates the suspension far more firmly, so the car feels sharper and more consistent through corners and over bumps.\u003c\/p\u003e\n\u003cp\u003eThey use pillow ball (spherical) joints, which give precise, direct feedback with no rubber deflection. The length is adjustable, so you can fine-tune the geometry.\u003c\/p\u003e\n\u003cp\u003eIt suits the Hyundai Genesis (1st Gen) 2008-2016.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer suspension location than the factory arms\u003c\/li\u003e\n\u003cli\u003eSharper, more consistent handling\u003c\/li\u003e\n\u003cli\u003eAdjustable length to fine-tune the geometry\u003c\/li\u003e\n\u003cli\u003ePillow ball joints for zero deflection\u003c\/li\u003e\n\u003cli\u003eHigh-strength steel construction\u003c\/li\u003e\n\u003cli\u003eSupplied complete with bushes or joints fitted, so no press is needed\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear upper arms (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Coupe 2008-2016 \/ Genesis Coupe 2.0 Turbo 2008-2012\u003c\/li\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Coupe 2008-2016 \/ Genesis Coupe 2.0 Turbo 2012-2016\u003c\/li\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Coupe 2008-2016 \/ Genesis Coupe 3.8 2008-2012\u003c\/li\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Coupe 2008-2016 \/ Genesis Coupe 3.8 2012-2016\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on axle stands or a ramp. Remove the factory arm and bolt the Hardrace arm in its place; it comes complete with its bushes or joints fitted, so no press is needed. Set adjustable arms to the same length as the factory parts to start. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-rear-toe-kit-with-hardened-rubber-bushes-2pc-set-hyundai-coupe-09-12\"\u003eHardrace Adjustable Rear Toe Kit With Hardened Rubber Bushes 2Pc Set Hyundai Coupe 09-12\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-rear-toe-control-arm-with-spherical-bearings-2pc-set-hyundai-genesis-coupe-09-12\"\u003eHardrace Adjustable Rear Toe Control Arm With Spherical Bearings 2Pc Set Hyundai Genesis C\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-rear-trailing-arm-with-spherical-bearings-2pc-set-hyundai-genesis-coupe-09-12\"\u003eHardrace Adjustable Rear Trailing Arm With Spherical Bearings 2Pc Set Hyundai Genesis Coup\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes. Have a full four-wheel alignment done after fitting, and use it to set the adjustable arms to the settings you want.\u003c\/p\u003e\n\u003ch3\u003eDoes it come with the bushes fitted?\u003c\/h3\u003e\n\u003cp\u003eYes. The arm comes complete with its bushes or joints already fitted, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003ePillow ball joints pass on a little more noise and vibration than rubber bushes, but there is no rubber flex, so the handling is far more precise.\u003c\/p\u003e\n\u003ch3\u003eHow is it adjusted?\u003c\/h3\u003e\n\u003cp\u003eThe arm length is set with the adjuster and locked with lock nuts. Set it to the factory length first, then fine-tune it during the alignment.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780013584696,"sku":"HR-7206","price":279.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201552915332915r33d29mt.jpg?v=1678898101"},{"product_id":"hardrace-hardened-transmission-mount-1pc-set-hyundai-genesis-coupe-09-12","title":"Hardrace Hardened Transmission Mount Hyundai Genesis Coupe 09-12","description":"\u003ch2\u003eHardrace Hardened Transmission Mount 6MT 5AT for Hyundai Genesis (2008-2016) – Less Engine Movement, Sharper Response\u003c\/h2\u003e\n\u003cp\u003eSoft factory mounts let the engine and gearbox rock under acceleration, braking and gear changes, which blunts throttle response, makes shifts vague and can cause wheel hop. This Hardrace hardened transmission mount is a firmer upgrade that holds the drivetrain in place, so power goes down more cleanly and the car feels tighter and more responsive.\u003c\/p\u003e\n\u003cp\u003eIt uses hardened rubber, a high-strength, anti-crack compound that is firmer than the factory rubber but still absorbs some vibration.\u003c\/p\u003e\n\u003cp\u003eIt suits the Hyundai Genesis (2008-2016).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer than the factory mount\u003c\/li\u003e\n\u003cli\u003eLess engine and gearbox movement\u003c\/li\u003e\n\u003cli\u003eSharper throttle response and more precise gear changes\u003c\/li\u003e\n\u003cli\u003eHelps reduce wheel hop\u003c\/li\u003e\n\u003cli\u003eHardened rubber: firm but still absorbs vibration\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHardened transmission mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Coupe 2008-2016 \/ Genesis Coupe 2.0 Turbo 2008-2012\u003c\/li\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Coupe 2008-2016 \/ Genesis Coupe 2.0 Turbo 2012-2016\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e For 6MT \/ 5AT use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the engine and gearbox with a jack or engine support bar before undoing any mount, and work on one mount at a time so the drivetrain stays aligned. Remove the factory mount and bolt the Hardrace mount in its place. Tighten all fixings to the vehicle manufacturer's torque figures. Expect a little more vibration than standard. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hyundai-genesis-coupe-12-16-8at-trans-mount-rear-1pcs-set-top-mounting-bolt-m10\"\u003eHardrace 8At Trans Mount Rear 1Pcs Hyundai Genesis Coupe 12-16 Top Mounting Bolt M10\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hyundai-genesis-coupe-08-12-6at-8at-trans-mount-rear-1pcs-set-top-mounting-bolt-m8\"\u003eHardrace 6At 8At Trans Mount Rear 1Pcs Hyundai Genesis Coupe 08-12 Top Mounting Bolt M8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-engine-mount-2pc-set-hyundai-genesis-coupe-2-0-turbo-09-12\"\u003eHardrace Hardened Engine Mount 2Pc Set Hyundai Genesis Coupe 2.0 Turbo 09-12\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill it increase vibration?\u003c\/h3\u003e\n\u003cp\u003eYes, a little. Firmer mounts pass more engine vibration into the cabin, especially at idle.\u003c\/p\u003e\n\u003ch3\u003eShould I upgrade all the mounts at once?\u003c\/h3\u003e\n\u003cp\u003eUpgrading the matching mounts together gives the most consistent result, but each mount can be fitted on its own.\u003c\/p\u003e\n\u003ch3\u003eDoes it suit manual or automatic cars?\u003c\/h3\u003e\n\u003cp\u003eHardrace lists it for manual and automatic models. Check the note in the Fitment section against your engine and gearbox before ordering.\u003c\/p\u003e\n\u003ch3\u003eDoes it come ready to fit?\u003c\/h3\u003e\n\u003cp\u003eYes. It is a complete mount, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780013683000,"sku":"HR-7380","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201511261424814f2o48ar.jpg?v=1678898102"},{"product_id":"hardrace-hyundai-genesis-coupe-12-16-8at-trans-mount-rear-1pcs-set-top-mounting-bolt-m10","title":"Hardrace 8At Trans Mount Rear Hyundai Genesis Coupe 12-16 Top Mounting","description":"\u003ch2\u003eHardrace Hardened Transmission Mount for Hyundai Genesis (2008-2016) – Less Engine Movement, Sharper Response\u003c\/h2\u003e\n\u003cp\u003eSoft factory mounts let the engine and gearbox rock under acceleration, braking and gear changes, which blunts throttle response, makes shifts vague and can cause wheel hop. This Hardrace hardened transmission mount is a firmer upgrade that holds the drivetrain in place, so power goes down more cleanly and the car feels tighter and more responsive.\u003c\/p\u003e\n\u003cp\u003eIt uses hardened rubber, a high-strength, anti-crack compound that is firmer than the factory rubber but still absorbs some vibration.\u003c\/p\u003e\n\u003cp\u003eIt suits the Hyundai Genesis (2008-2016).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer than the factory mount\u003c\/li\u003e\n\u003cli\u003eLess engine and gearbox movement\u003c\/li\u003e\n\u003cli\u003eSharper throttle response and more precise gear changes\u003c\/li\u003e\n\u003cli\u003eHelps reduce wheel hop\u003c\/li\u003e\n\u003cli\u003eHardened rubber: firm but still absorbs vibration\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHardened transmission mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Coupe 2008-2016 \/ Genesis Coupe 2.0 Turbo 2008-2012\u003c\/li\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Coupe 2008-2016 \/ Genesis Coupe 2.0 Turbo 2012-2016\u003c\/li\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Coupe 2008-2016 \/ Genesis Coupe 3.8 2008-2012\u003c\/li\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Coupe 2008-2016 \/ Genesis Coupe 3.8 2012-2016\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e For '12-16 8AT use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the engine and gearbox with a jack or engine support bar before undoing any mount, and work on one mount at a time so the drivetrain stays aligned. Remove the factory mount and bolt the Hardrace mount in its place. Tighten all fixings to the vehicle manufacturer's torque figures. Expect a little more vibration than standard. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-transmission-mount-1pc-set-hyundai-genesis-coupe-09-12\"\u003eHardrace Hardened Transmission Mount 1Pc Set Hyundai Genesis Coupe 09-12\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hyundai-genesis-coupe-08-12-6at-8at-trans-mount-rear-1pcs-set-top-mounting-bolt-m8\"\u003eHardrace 6At 8At Trans Mount Rear 1Pcs Hyundai Genesis Coupe 08-12 Top Mounting Bolt M8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-engine-mount-2pc-set-hyundai-genesis-coupe-2-0-turbo-09-12\"\u003eHardrace Hardened Engine Mount 2Pc Set Hyundai Genesis Coupe 2.0 Turbo 09-12\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill it increase vibration?\u003c\/h3\u003e\n\u003cp\u003eYes, a little. Firmer mounts pass more engine vibration into the cabin, especially at idle.\u003c\/p\u003e\n\u003ch3\u003eShould I upgrade all the mounts at once?\u003c\/h3\u003e\n\u003cp\u003eUpgrading the matching mounts together gives the most consistent result, but each mount can be fitted on its own.\u003c\/p\u003e\n\u003ch3\u003eDoes it suit manual or automatic cars?\u003c\/h3\u003e\n\u003cp\u003eHardrace lists it for automatic models. Check the note in the Fitment section against your engine and gearbox before ordering.\u003c\/p\u003e\n\u003ch3\u003eDoes it come ready to fit?\u003c\/h3\u003e\n\u003cp\u003eYes. It is a complete mount, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780013715768,"sku":"HR-Q0744","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0744_main.jpg?v=1678898104"},{"product_id":"hardrace-hyundai-genesis-coupe-08-12-6at-8at-trans-mount-rear-1pcs-set-top-mounting-bolt-m8","title":"Hardrace 6At 8At Trans Mount Rear Hyundai Genesis Coupe 08-12 Top Mounting","description":"\u003ch2\u003eHardrace Hardened Transmission Mount 6AT 8AT for Hyundai Genesis (2008-2016) – Less Engine Movement, Sharper Response\u003c\/h2\u003e\n\u003cp\u003eSoft factory mounts let the engine and gearbox rock under acceleration, braking and gear changes, which blunts throttle response, makes shifts vague and can cause wheel hop. This Hardrace hardened transmission mount is a firmer upgrade that holds the drivetrain in place, so power goes down more cleanly and the car feels tighter and more responsive.\u003c\/p\u003e\n\u003cp\u003eIt uses hardened rubber, a high-strength, anti-crack compound that is firmer than the factory rubber but still absorbs some vibration.\u003c\/p\u003e\n\u003cp\u003eIt suits the Hyundai Genesis (2008-2016).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer than the factory mount\u003c\/li\u003e\n\u003cli\u003eLess engine and gearbox movement\u003c\/li\u003e\n\u003cli\u003eSharper throttle response and more precise gear changes\u003c\/li\u003e\n\u003cli\u003eHelps reduce wheel hop\u003c\/li\u003e\n\u003cli\u003eHardened rubber: firm but still absorbs vibration\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHardened transmission mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Coupe 2008-2016 \/ Genesis Coupe 2.0 Turbo 2008-2012\u003c\/li\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Coupe 2008-2016 \/ Genesis Coupe 2.0 Turbo 2012-2016\u003c\/li\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Coupe 2008-2016 \/ Genesis Coupe 3.8 2008-2012\u003c\/li\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Coupe 2008-2016 \/ Genesis Coupe 3.8 2012-2016\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e For 6AT \/ '11-12 8AT use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the engine and gearbox with a jack or engine support bar before undoing any mount, and work on one mount at a time so the drivetrain stays aligned. Remove the factory mount and bolt the Hardrace mount in its place. Tighten all fixings to the vehicle manufacturer's torque figures. Expect a little more vibration than standard. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-transmission-mount-1pc-set-hyundai-genesis-coupe-09-12\"\u003eHardrace Hardened Transmission Mount 1Pc Set Hyundai Genesis Coupe 09-12\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hyundai-genesis-coupe-12-16-8at-trans-mount-rear-1pcs-set-top-mounting-bolt-m10\"\u003eHardrace 8At Trans Mount Rear 1Pcs Hyundai Genesis Coupe 12-16 Top Mounting Bolt M10\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-engine-mount-2pc-set-hyundai-genesis-coupe-2-0-turbo-09-12\"\u003eHardrace Hardened Engine Mount 2Pc Set Hyundai Genesis Coupe 2.0 Turbo 09-12\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill it increase vibration?\u003c\/h3\u003e\n\u003cp\u003eYes, a little. Firmer mounts pass more engine vibration into the cabin, especially at idle.\u003c\/p\u003e\n\u003ch3\u003eShould I upgrade all the mounts at once?\u003c\/h3\u003e\n\u003cp\u003eUpgrading the matching mounts together gives the most consistent result, but each mount can be fitted on its own.\u003c\/p\u003e\n\u003ch3\u003eDoes it suit manual or automatic cars?\u003c\/h3\u003e\n\u003cp\u003eHardrace lists it for automatic models. Check the note in the Fitment section against your engine and gearbox before ordering.\u003c\/p\u003e\n\u003ch3\u003eDoes it come ready to fit?\u003c\/h3\u003e\n\u003cp\u003eYes. It is a complete mount, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780013748536,"sku":"HR-Q0745","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0745_main.jpg?v=1678898105"},{"product_id":"hardrace-22mm-adjustable-rear-anti-roll-bar-5pc-set-hyundai-genesis-coupe-09-12","title":"Hardrace 22mm Adjustable Rear Anti Roll Bar Hyundai Genesis Coupe 09-12","description":"\u003ch2\u003eHardrace 22mm Adjustable Rear Anti Roll Bar for Hyundai Genesis (2008-2016) – Flatter Cornering, Sharper Response\u003c\/h2\u003e\n\u003cp\u003eThe factory rear anti-roll bar is soft, so the car leans and pushes wide in corners. This Hardrace 22mm rear anti-roll bar is a stiffer upgrade that cuts rear body roll, which reduces understeer and helps the car rotate into corners.\u003c\/p\u003e\n\u003cp\u003eIt has adjustment, so you can fine-tune the roll stiffness to suit the road or track. It comes with mounting bushes.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e22mm rear bar for reduced body roll\u003c\/li\u003e\n\u003cli\u003eReduces understeer and helps the car rotate\u003c\/li\u003e\n\u003cli\u003eAdjustable roll stiffness\u003c\/li\u003e\n\u003cli\u003eMounting bushes included\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e5-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e22mm rear anti-roll bar\u003c\/li\u003e\n\u003cli\u003eMounting bushes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e5 pieces in total.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Coupe 2008-2016 \/ Genesis Coupe 2.0 Turbo 2008-2012\u003c\/li\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Coupe 2008-2016 \/ Genesis Coupe 2.0 Turbo 2012-2016\u003c\/li\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Coupe 2008-2016 \/ Genesis Coupe 3.8 2008-2012\u003c\/li\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Coupe 2008-2016 \/ Genesis Coupe 3.8 2012-2016\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on a ramp or axle stands. Undo the drop links and bush brackets and remove the factory bar. Fit the Hardrace bar with its bushes, refit the brackets and links, and tighten everything to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Set both ends to the same adjustment hole to start. No wheel alignment is needed for the bar alone. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-28mm-front-anti-roll-bar-3pc-set-hyundai-genesis-coupe-09-12\"\u003eHardrace 28mm Front Anti Roll Bar 3Pc Set Hyundai Genesis Coupe 09-12\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment after fitting?\u003c\/h3\u003e\n\u003cp\u003eNo. An anti-roll bar does not change camber, toe or caster. You only need an alignment if you change the ride height at the same time.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eA stiffer bar is felt mainly in corners and over bumps that hit one side of the car. Over bumps that hit both wheels evenly, the ride is largely unchanged.\u003c\/p\u003e\n\u003ch3\u003eWhich setting should I start on?\u003c\/h3\u003e\n\u003cp\u003eStart on the softest setting with both ends set the same, then go firmer if you want less roll.\u003c\/p\u003e\n\u003ch3\u003eCan I use my standard drop links?\u003c\/h3\u003e\n\u003cp\u003eYes. On a lowered car, adjustable drop links let you set the bar level at rest, so it is not pre-loaded.\u003c\/p\u003e\n\u003ch3\u003eShould I upgrade the front bar too?\u003c\/h3\u003e\n\u003cp\u003eUpgrading both ends cuts roll at both axles while keeping the balance closer to standard. Upgrading one end only shifts the balance: a stiffer front adds understeer, a stiffer rear adds oversteer.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780013814072,"sku":"HR-7885","price":177.36,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20165171654116b54n1ug.jpg?v=1678898106"},{"product_id":"hardrace-28mm-front-anti-roll-bar-3pc-set-hyundai-genesis-coupe-09-12","title":"Hardrace 28mm Front Anti Roll Bar Hyundai Genesis Coupe 09-12","description":"\u003ch2\u003eHardrace 28mm Front Anti Roll Bar for Hyundai Genesis (2008-2016) – Flatter Cornering, Sharper Response\u003c\/h2\u003e\n\u003cp\u003eThe factory front anti-roll bar is built for comfort, so the car leans in corners and the steering feels slow to respond. This Hardrace 28mm front anti-roll bar is a stiffer upgrade that cuts body roll, so the car sits flatter, turns in more crisply and feels more composed through quick changes of direction.\u003c\/p\u003e\n\u003cp\u003eIt comes with mounting bushes.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e28mm front bar for reduced body roll\u003c\/li\u003e\n\u003cli\u003eSharper turn-in and flatter cornering\u003c\/li\u003e\n\u003cli\u003eMounting bushes included\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e3-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e28mm front anti-roll bar\u003c\/li\u003e\n\u003cli\u003eMounting bushes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e3 pieces in total.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Coupe 2008-2016 \/ Genesis Coupe 2.0 Turbo 2008-2012\u003c\/li\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Coupe 2008-2016 \/ Genesis Coupe 2.0 Turbo 2012-2016\u003c\/li\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Coupe 2008-2016 \/ Genesis Coupe 3.8 2008-2012\u003c\/li\u003e\n\u003cli\u003eHyundai \/ Genesis (1st Gen) 2008-2016 \/ Coupe 2008-2016 \/ Genesis Coupe 3.8 2012-2016\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on a ramp or axle stands. Undo the drop links and bush brackets and remove the factory bar. Fit the Hardrace bar with its bushes, refit the brackets and links, and tighten everything to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. No wheel alignment is needed for the bar alone. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-22mm-adjustable-rear-anti-roll-bar-5pc-set-hyundai-genesis-coupe-09-12\"\u003eHardrace 22mm Adjustable Rear Anti Roll Bar 5Pc Set Hyundai Genesis Coupe 09-12\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment after fitting?\u003c\/h3\u003e\n\u003cp\u003eNo. An anti-roll bar does not change camber, toe or caster. You only need an alignment if you change the ride height at the same time.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eA stiffer bar is felt mainly in corners and over bumps that hit one side of the car. Over bumps that hit both wheels evenly, the ride is largely unchanged.\u003c\/p\u003e\n\u003ch3\u003eCan I use my standard drop links?\u003c\/h3\u003e\n\u003cp\u003eYes. On a lowered car, adjustable drop links let you set the bar level at rest, so it is not pre-loaded.\u003c\/p\u003e\n\u003ch3\u003eShould I upgrade the rear bar too?\u003c\/h3\u003e\n\u003cp\u003eUpgrading both ends cuts roll at both axles while keeping the balance closer to standard. Upgrading one end only shifts the balance: a stiffer front adds understeer, a stiffer rear adds oversteer.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780013846840,"sku":"HR-7884","price":248.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/2016151502715q0r27no.jpg?v=1678898107"},{"product_id":"hardrace-adjustable-universal-drop-links-10mm-rod-ends-100-109mm","title":"Hardrace Adjustable Universal Drop Links 10mm Rod Ends 100-109mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 100-120mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 100-120mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 100-120mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop link\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Convertible (V36) 2009-2013 \/ G37 Convertible 3.7 2009-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Coupe (V36) 2008-2013 \/ G37 Coupe 3.7 2008-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Sedan (V36) 2006-2013 \/ G25 Sedan 2.5 2010-2012\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Sedan (V36) 2006-2013 \/ G35 Sedan 3.5 2006-2008\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Sedan (V36) 2006-2013 \/ G37 Sedan 3.7 2007-2013\u003c\/li\u003e\n\u003cli\u003eNissan \/ 350Z 2002-2009 \/ Coupe (Z33) 2002-2009 \/ 350Z 3.5 2002-2009\u003c\/li\u003e\n\u003cli\u003ePorsche \/ 911 (5th Gen) 1997-2005 \/ 911 (996) 1997-2005 \/ 911 Carrera 3.4 1997-2002\u003c\/li\u003e\n\u003cli\u003ePorsche \/ 911 (5th Gen) 1997-2005 \/ 911 (996) 1997-2005 \/ 911 Carrera 4 3.4 1997-2002\u003c\/li\u003e\n\u003cli\u003eFord \/ Focus (4th Gen) 2018-Present \/ Hatchback (C519) 2018-Present \/ Focus 1.0 Turbo 2018-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Focus (4th Gen) 2018-Present \/ Hatchback (C519) 2018-Present \/ Focus 1.0 Turbo Hybrid 2018-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Focus (4th Gen) 2018-Present \/ Hatchback (C519) 2018-Present \/ Focus 1.5 TD 2018-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Focus (4th Gen) 2018-Present \/ Hatchback (C519) 2018-Present \/ Focus 1.5 Turbo 2018-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Focus (4th Gen) 2018-Present \/ Hatchback (C519) 2018-Present \/ Focus 2.0 TD 2018-Present\u003c\/li\u003e\n\u003cli\u003eNissan \/ 350Z 2002-2009 \/ Coupe (Z33) 2002-2009 \/ 350Z 3.5 (w\/ Brembo) 2002-2009\u003c\/li\u003e\n\u003cli\u003eNissan \/ 350Z 2002-2009 \/ Roadster (Z33) 2004-2009 \/ 350Z 3.5 (w\/ Brembo) 2004-2009\u003c\/li\u003e\n\u003cli\u003eNissan \/ 350Z 2002-2009 \/ Roadster (Z33) 2004-2009 \/ 350Z 3.5 2004-2009\u003c\/li\u003e\n\u003cli\u003eNissan \/ 370Z 2009-Present \/ Coupe (Z34) 2009-Present \/ 370Z 3.7 2009-Present\u003c\/li\u003e\n\u003cli\u003eNissan \/ 370Z 2009-Present \/ Roadster (Z34) 2009-Present \/ 370Z 3.7 2009-Present\u003c\/li\u003e\n\u003cli\u003eHonda \/ Accord 4-Door Sedan \/ 2003-2005 \/ 2.0i\u003c\/li\u003e\n\u003cli\u003eHonda \/ Accord 4-Door Sedan \/ 2003-2005 \/ 2.4i\u003c\/li\u003e\n\u003cli\u003eHonda \/ Accord 4-Door Sedan \/ 2005-2008 \/ 2.0i\u003c\/li\u003e\n\u003cli\u003eHonda \/ Accord 4-Door Sedan \/ 2005-2008 \/ 2.4i\u003c\/li\u003e\n\u003cli\u003eHonda \/ CR-V \/ 2017-2023 \/ 2.0 2WD\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Focus MK4 : Not For Wagon use; Porsche 996: For C2\/C4\/Turbo Rear Side use; CR-V '17-: For AWD Rear Side use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780138529080,"sku":"HR-6853-100","price":106.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201512992409u2d40ms.jpg?v=1678899660"},{"product_id":"hardrace-adjustable-universal-drop-links-10mm-rod-ends-125-164mm","title":"Hardrace Adjustable Universal Drop Links 10mm Rod Ends 125-164mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 125-164mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 125-164mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 125-164mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW \/ 1-Series (2nd Gen) \/ Hatchback 3DR (F21) \/ 2011-2019\u003c\/li\u003e\n\u003cli\u003eBMW \/ 1-Series (2nd Gen) \/ Hatchback 5DR (F20) \/ 2011-2019\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (6th Gen) \/ Gran Turismo (F34) \/ 2011-2019\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (6th Gen) \/ Sedan (F30) \/ 2011-2019\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (6th Gen) \/ Touring (F31) \/ 2011-2019\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (7th Gen) \/ Sedan (G20) \/ 2019-Present\u003c\/li\u003e\n\u003cli\u003eBMW \/ 4-Series (2nd Gen) \/ Convertible (G23) \/ 2020-Present\u003c\/li\u003e\n\u003cli\u003eBMW \/ 4-Series (2nd Gen) \/ Coupe (G22) \/ 2020-Present\u003c\/li\u003e\n\u003cli\u003eBMW \/ 4-Series (2nd Gen) \/ Gran Coupe (G26) \/ 2020-Present\u003c\/li\u003e\n\u003cli\u003eBMW \/ Z4 (3rd Gen) \/ Roadster (G29) \/ 2019-Present\u003c\/li\u003e\n\u003cli\u003eHonda \/ Accord 4-Door Sedan \/ 2008-2011\u003c\/li\u003e\n\u003cli\u003eMazda \/ 3 (3rd Gen) \/ Hatchback (BM\/BN) \/ 2013-2018\u003c\/li\u003e\n\u003cli\u003eMazda \/ 3 (3rd Gen) \/ Sedan (BM\/BN) \/ 2013-2018\u003c\/li\u003e\n\u003cli\u003eMazda \/ 6 (3rd Gen) \/ Sedan (GJ\/GL) \/ 2012-Present\u003c\/li\u003e\n\u003cli\u003eMazda \/ 6 (3rd Gen) \/ Wagon (GJ\/GL) \/ 2012-Present\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-5 (1st Gen) \/ SUV (KE) \/ 2012-2017\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-5 (2nd Gen) \/ SUV (KF) \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-9 (2nd Gen) \/ SUV (TC) \/ 2016-Present\u003c\/li\u003e\n\u003cli\u003eTesla \/ Model 3 \/ Sedan (5YJ3) \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eTesla \/ Model Y \/ SUV \/ 2020-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Supra (5th Gen) \/ Coupe (A90) \/ 2019-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780138561848,"sku":"HR-8659-140","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/2017541032810b3a28yc.jpg?v=1678899661"},{"product_id":"hardrace-adjustable-universal-drop-links-10mm-rod-ends-160-199mm","title":"Hardrace Adjustable Universal Drop Links 10mm Rod Ends 160-199mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 160-199mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 160-199mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 160-199mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop link\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAlfa Romeo \/ 147 \/ Hatchback (937) \/ 2000-2010\u003c\/li\u003e\n\u003cli\u003eAlfa Romeo \/ 156 \/ Sedan (932) \/ 1997-2007\u003c\/li\u003e\n\u003cli\u003eAlfa Romeo \/ 156 \/ Wagon (932) \/ 1997-2007\u003c\/li\u003e\n\u003cli\u003eAlfa Romeo \/ GT \/ Coupe (937) \/ 2003-2010\u003c\/li\u003e\n\u003cli\u003eMazda \/ 323 (8th Gen) \/ Hatchback (BJ) \/ 1998-2003\u003c\/li\u003e\n\u003cli\u003eMazda \/ 323 (8th Gen) \/ Sedan (BJ) \/ 1998-2003\u003c\/li\u003e\n\u003cli\u003eMazda \/ Premacy (1st Gen) \/ MPV (CP) (5 Seat) \/ 1999-2005\u003c\/li\u003e\n\u003cli\u003eMazda \/ Premacy (1st Gen) \/ MPV (CP) (7 Seat) \/ 1999-2005\u003c\/li\u003e\n\u003cli\u003eToyota \/ MR2 (2nd Gen) \/ Coupe (W20) \/ 1989-1999\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780138594616,"sku":"HR-8659-180","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20167794239d42x3vs.jpg?v=1678899661"},{"product_id":"hardrace-adjustable-universal-drop-links-10mm-rod-ends-200-239mm","title":"Hardrace Adjustable Universal Drop Links 10mm Rod Ends 200-239mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 200-239mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 200-239mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 200-239mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop link\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHonda \/ Civic 3-Door Hatchback \/ 2007-2011\u003c\/li\u003e\n\u003cli\u003eHonda \/ Civic 5-Door Hatchback \/ 2005-2012\u003c\/li\u003e\n\u003cli\u003eKia \/ Picanto (1st Gen) \/ Hatchback (BA\/SA) \/ 2004-2011\u003c\/li\u003e\n\u003cli\u003eLexus \/ ES (4th Gen) \/ Sedan (XV30) \/ 2001-2006\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (2nd Gen) \/ SUV (XU30) \/ 2003-2009\u003c\/li\u003e\n\u003cli\u003eMINI \/ Mini (1st Gen) \/ Convertible (R52) \/ 2001-2008\u003c\/li\u003e\n\u003cli\u003eMINI \/ Mini (1st Gen) \/ Hatchback (R50) \/ 2001-2008\u003c\/li\u003e\n\u003cli\u003eMINI \/ Mini (1st Gen) \/ Hatchback (R53) \/ 2001-2008\u003c\/li\u003e\n\u003cli\u003eToyota \/ Camry  (7th Gen) \/ Sedan (XV40) \/ 2007-2012\u003c\/li\u003e\n\u003cli\u003eToyota \/ Camry (6th Gen) \/ Sedan (XV30) \/ 2001-2006\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780138627384,"sku":"HR-8659-220","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20168413391313k39g13cv.jpg?v=1678899662"},{"product_id":"hardrace-adjustable-universal-drop-links-10mm-rod-ends-240-279mm","title":"Hardrace Adjustable Universal Drop Links 10mm Rod Ends 240-279mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 240-279mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 240-279mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 240-279mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi \/ A1 (1st Gen) \/ 2010-2018\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (4th Gen) \/ 1998-2007\u003c\/li\u003e\n\u003cli\u003eBMW \/ Z4 (1st Gen) \/ 2003-2009\u003c\/li\u003e\n\u003cli\u003eFord \/ Fiesta (6th Gen) (UKDM MK7) \/ 2008-2017\u003c\/li\u003e\n\u003cli\u003eMazda \/ 2 (3rd Gen) \/ 2007-2014\u003c\/li\u003e\n\u003cli\u003eMazda \/ 3 (4th Gen) \/ 2019-Present\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-3 \/ 2015-Present\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-30 \/ 2019-Present\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Eclipse Cross \/ 2018-Present\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (8th Gen) \/ 2007-2017\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Outlander (2nd Gen) \/ 2007-2012\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Outlander (3rd Gen) \/ 2012-Present\u003c\/li\u003e\n\u003cli\u003eNissan \/ Cube (3rd Gen) \/ 2008-2011\u003c\/li\u003e\n\u003cli\u003eNissan \/ Micra (3rd Gen) \/ 2003-2010\u003c\/li\u003e\n\u003cli\u003eNissan \/ Micra (4th Gen) \/ 2010-2017\u003c\/li\u003e\n\u003cli\u003eSkoda \/ Fabia (2nd Gen) \/ 2007-2014\u003c\/li\u003e\n\u003cli\u003eSkoda \/ Fabia (3rd Gen) \/ 2014-2022\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ SX4 (MK1) \/ 2006-2013\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ SX4 S-Cross \/ 2013-2021\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Swift (MK5) \/ 2010-2017\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Vitara (MK4) \/ 2015-Present\u003c\/li\u003e\n\u003cli\u003eVolkswagen \/ Polo (5th Gen) \/ 2009-2017\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780138922296,"sku":"HR-8659-260","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201662413132313r13w23gq.jpg?v=1678899664"},{"product_id":"hardrace-adjustable-universal-drop-links-10mm-rod-ends-280-319mm","title":"Hardrace Adjustable Universal Drop Links 10mm Rod Ends 280-319mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 280-319mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 280-319mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 280-319mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW \/ 1-Series (1st Gen) \/ 2003-2013\u003c\/li\u003e\n\u003cli\u003eBMW \/ 1-Series (2nd Gen) \/ 2011-2019\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (5th Gen) \/ 2004-2013\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (6th Gen) \/ 2011-2019\u003c\/li\u003e\n\u003cli\u003eBMW \/ 4-Series (2nd Gen) \/ 2020-Present\u003c\/li\u003e\n\u003cli\u003eBMW \/ Z4 (2nd Gen) \/ 2009-2016\u003c\/li\u003e\n\u003cli\u003eFord \/ Kuga (2nd Gen) \/ 2012-2019\u003c\/li\u003e\n\u003cli\u003eFord \/ Mondeo (4th Gen) \/ 2007-2014\u003c\/li\u003e\n\u003cli\u003eHonda \/ Civic 5-Door Hatchback \/ 2022-Present\u003c\/li\u003e\n\u003cli\u003eHonda \/ Jazz (1st Gen) \/ 2002-2008\u003c\/li\u003e\n\u003cli\u003eHonda \/ Jazz (2nd Gen) \/ 2008-2015\u003c\/li\u003e\n\u003cli\u003eHonda \/ Jazz (3rd Gen) \/ 2015-2020\u003c\/li\u003e\n\u003cli\u003eHonda \/ Jazz (4th Gen) \/ 2020-Present\u003c\/li\u003e\n\u003cli\u003eMG \/ ZS \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eMINI \/ Mini (2nd Gen) \/ 2006-2016\u003c\/li\u003e\n\u003cli\u003eMazda \/ 3 (3rd Gen) \/ 2013-2018\u003c\/li\u003e\n\u003cli\u003eMazda \/ 5 (2nd Gen) \/ 2005-2010\u003c\/li\u003e\n\u003cli\u003eMazda \/ 6 (3rd Gen) \/ 2012-Present\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-5 (1st Gen) \/ 2012-2017\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-5 (2nd Gen) \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-9 (2nd Gen) \/ 2016-Present\u003c\/li\u003e\n\u003cli\u003eMini \/ Countryman (3rd Gen) \/ 2023-Present\u003c\/li\u003e\n\u003cli\u003eMini \/ Mini (3rd Gen) \/ 2014-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ S60 (2nd Gen) \/ 2010-2018\u003c\/li\u003e\n\u003cli\u003eVolvo \/ S80 (2nd Gen) \/ 2006-2016\u003c\/li\u003e\n\u003cli\u003eVolvo \/ V60 (1st Gen) \/ 2010-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ V70 (3rd Gen) \/ 2007-2016\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC70 (2nd Gen) \/ 2007-2016\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Porsche 996\/997: For C4\/Turbo Front Side use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780138955064,"sku":"HR-8659-300","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20166241331113w31d1wn.jpg?v=1678899665"},{"product_id":"hardrace-adjustable-universal-drop-links-12mm-rod-ends-104-130mm","title":"Hardrace Adjustable Universal Drop Links 12mm Rod Ends 104-130mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 104-130mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 104-130mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 104-130mm\u003c\/li\u003e\n\u003cli\u003e12mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInfiniti \/ FX (2nd Gen) 2008-2013 \/ SUV (S51) 2008-2013 \/ FX30D 3.0 TD 2010-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ FX (2nd Gen) 2008-2013 \/ SUV (S51) 2008-2013 \/ FX37 3.7 2008-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ FX (2nd Gen) 2008-2013 \/ SUV (S51) 2008-2013 \/ FX50 5.0 2008-2013\u003c\/li\u003e\n\u003cli\u003eLexus \/ LS (1st Gen) 1989-1994 \/ Sedan (XF10) 1989-1994 \/ LS400 4.0 (UCF10) 1989-1992\u003c\/li\u003e\n\u003cli\u003eLexus \/ LS (1st Gen) 1989-1994 \/ Sedan (XF10) 1989-1994 \/ LS400 4.0 (UCF11) 1992-1994\u003c\/li\u003e\n\u003cli\u003eLexus \/ LS (2nd Gen) 1994-2000 \/ Sedan (XF20) 1994-2000 \/ LS400 4.0 (UCF20\/UCF21) 1994-2000\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (3rd Gen) 2008-2015 \/ SUV (AL10) 2008-2015 \/ RX270 2.7 (AGL10) 2008-2015\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (3rd Gen) 2008-2015 \/ SUV (AL10) 2008-2015 \/ RX350 3.5 (AWD) (GGL15) 2008-2012\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (3rd Gen) 2008-2015 \/ SUV (AL10) 2008-2015 \/ RX350 3.5 (GRL10) 2008-2012\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (3rd Gen) 2008-2015 \/ SUV (AL10) 2008-2015 \/ RX350 3.5 (GYL10) 2008-2015\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (3rd Gen) 2008-2015 \/ SUV (AL10) 2008-2015 \/ RX450h Hybrid 3.5 (AWD) (GYL15) 2008-2015\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (3rd Gen) 2008-2015 \/ SUV (AL10) 2008-2015 \/ RX450h Hybrid 3.5 (GYL10) 2008-2015\u003c\/li\u003e\n\u003cli\u003eFord \/ Kuga (3rd Gen) 2019-Present \/ SUV (CX482) 2019-Present \/ Kuga 1.5 Turbo 2019-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Kuga (3rd Gen) 2019-Present \/ SUV (CX482) 2019-Present \/ Kuga 2.0 Turbo 2019-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Kuga (3rd Gen) 2019-Present \/ SUV (CX482) 2019-Present \/ Kuga 2.0TD 2019-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Kuga (3rd Gen) 2019-Present \/ SUV (CX482) 2019-Present \/ Kuga 2.5 Hybrid 2019-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Kuga (3rd Gen) 2019-Present \/ SUV (CX482) 2019-Present \/ Kuga 2.5 PHEV 2019-Present\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (4th Gen) 2015-2023 \/ SUV (AL20) 2015-2023 \/ RX200t 2.0 Turbo (AGL20) 2015-2023\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (4th Gen) 2015-2023 \/ SUV (AL20) 2015-2023 \/ RX200t 2.0 Turbo (AWD) (AGL25) 2015-2023\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (4th Gen) 2015-2023 \/ SUV (AL20) 2015-2023 \/ RX350 3.5 (AWD) (GGL25) 2015-2023\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (4th Gen) 2015-2023 \/ SUV (AL20) 2015-2023 \/ RX450h Hybrid 3.5 (AWD) (GYL25) 2015-2023\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (4th Gen) 2015-2023 \/ SUV (AL20) 2015-2023 \/ RX450h Hybrid 3.5 (GYL20) 2015-2023\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139020600,"sku":"HR-8793-110","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201721616354516k35m45yu.jpg?v=1678899666"},{"product_id":"hardrace-adjustable-universal-drop-links-12mm-rod-ends-123-162mm","title":"Hardrace Adjustable Universal Drop Links 12mm Rod Ends 123-162mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 123-162mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 123-162mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 123-162mm\u003c\/li\u003e\n\u003cli\u003e12mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFord \/ Mustang (6th Gen) \/ Convertible (S550) \/ 2014-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Mustang (6th Gen) \/ Coupe (S550) \/ 2014-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ S60 (1st Gen) \/ Sedan (P24) \/ 2000-2009\u003c\/li\u003e\n\u003cli\u003eVolvo \/ S80 (1st Gen) \/ Sedan (TS) \/ 1998-2006\u003c\/li\u003e\n\u003cli\u003eVolvo \/ V70 (2nd Gen) \/ Wagon (Cross Country) \/ 2000-2007\u003c\/li\u003e\n\u003cli\u003eVolvo \/ V70 (2nd Gen) \/ Wagon (SW) \/ 2000-2007\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC70 (1st Gen) \/ Wagon \/ 2000-2007\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC90 (1st Gen) \/ SUV \/ 2002-2014\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Ace use (Rear).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139184440,"sku":"HR-8793-140","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/2017291348913z48b9jg.jpg?v=1678899668"},{"product_id":"hardrace-adjustable-universal-drop-links-12mm-rod-ends-163-202mm","title":"Hardrace Adjustable Universal Drop Links 12mm Rod Ends 163-202mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 163-202mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 163-202mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 163-202mm\u003c\/li\u003e\n\u003cli\u003e12mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW \/ 5-Series (6th Gen) \/ Gran Turismo (F07) \/ 2008-2017\u003c\/li\u003e\n\u003cli\u003eVolvo \/ S60 (3rd Gen) \/ Sedan \/ 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ S90 (2nd Gen) \/ Sedan \/ 2016-2025\u003c\/li\u003e\n\u003cli\u003eVolvo \/ V60 (2nd Gen) \/ Wagon \/ 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ V90 (2nd Gen) \/ Wagon \/ 2016-2025\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC60 (2nd Gen) \/ SUV \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC90 (2nd Gen) \/ SUV \/ 2014-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e BMW G30: For AWD use (Front).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-universal-adjustable-stabiliser-link-2pcs-range-90-110mm-12mm-stud-rod-end\"\u003eHardrace Universal Adjustable Stabiliser Link 2pcs Range 90-110mm 12mm Stud Rod End\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139217208,"sku":"HR-8793-180","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20172913484113l48d41tj.jpg?v=1678899668"},{"product_id":"hardrace-adjustable-universal-drop-links-12mm-rod-ends-203-242mm","title":"Hardrace Adjustable Universal Drop Links 12mm Rod Ends 203-242mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 203-242mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 203-242mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 203-242mm\u003c\/li\u003e\n\u003cli\u003e12mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW \/ 5-Series (7th Gen) \/ Sedan (G30) \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eBMW \/ 5-Series (7th Gen) \/ Touring (G31) \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eCadillac \/ ATS \/ Sedan \/ 2012-Present\u003c\/li\u003e\n\u003cli\u003eCadillac \/ CTS (3rd Gen) \/ Sedan \/ 2013-Present\u003c\/li\u003e\n\u003cli\u003eChevrolet \/ Camaro (6th Gen) \/ Coupe \/ 2015-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Mustang (6th Gen) \/ Convertible (S550) \/ 2014-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Mustang (6th Gen) \/ Coupe (S550) \/ 2014-Present\u003c\/li\u003e\n\u003cli\u003eSaab \/ 95 \/ 1999-2008\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e BMW G30: For RWD use (Front).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139249976,"sku":"HR-8793-220","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20172913491013n49k10fa.jpg?v=1678899669"},{"product_id":"hardrace-adjustable-universal-drop-links-12mm-rod-ends-243-282mm","title":"Hardrace Adjustable Universal Drop Links 12mm Rod Ends 243-282mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 243-282mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 243-282mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 243-282mm\u003c\/li\u003e\n\u003cli\u003e12mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLexus \/ ES (4th Gen) \/ Sedan (XV30) \/ 2001-2006\u003c\/li\u003e\n\u003cli\u003eLexus \/ GS (1st Gen) \/ Sedan (S140) \/ 1991-1997\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (2nd Gen) \/ SUV (XU30) \/ 2003-2009\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (3rd Gen) \/ SUV (AL10) \/ 2008-2015\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (4th Gen) \/ SUV (AL20) \/ 2015-2023\u003c\/li\u003e\n\u003cli\u003eMG \/ HS \/ SUV \/ 2019-Present\u003c\/li\u003e\n\u003cli\u003eNissan \/ Juke \/ SUV (F15) \/ 2010-Present\u003c\/li\u003e\n\u003cli\u003eTesla \/ Model 3 \/ Sedan (5YJ3) \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eTesla \/ Model Y \/ SUV \/ 2020-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Camry  (7th Gen) \/ Sedan (XV40) \/ 2007-2012\u003c\/li\u003e\n\u003cli\u003eToyota \/ Camry (6th Gen) \/ Sedan (XV30) \/ 2001-2006\u003c\/li\u003e\n\u003cli\u003eToyota \/ Camry (9th Gen) \/ Sedan (XV70) \/ 2017-2024\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (10th Gen) \/ Sedan (E150) \/ 2007-2013\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (11th Gen) \/ Sedan (E170) \/ 2013-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) \/ Hatchback (E120) \/ 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) \/ Sedan (E120) \/ 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) \/ Wagon (E120) \/ 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Previa (2nd Gen) \/ MPV (XR30) \/ 2000-2006\u003c\/li\u003e\n\u003cli\u003eToyota \/ RAV4 (6th Gen) \/ SUV (XA60) \/ 2025-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-reinforced-front-drop-links-2pc-set-toyota-camry-xv30\"\u003eHardrace Reinforced Front Drop Links 2Pc Set Toyota Camry XV30 01-06\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-reinforced-rear-drop-links-2pc-set-toyota-camry-xv30\"\u003eHardrace Reinforced Rear Drop Links 2Pc Set Toyota Camry XV30 01-06\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-reinforced-20mm-shortened-front-stabilizer-links-2pc-set-toyota-camry-xv40-06-11\"\u003eHardrace Reinforced 20mm Shortened Front Stabilizer Links 2Pc Set Toyota Camry XV40 06-11\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139282744,"sku":"HR-8793-260","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20172913493213w49o32is.jpg?v=1678899669"},{"product_id":"hardrace-adjustable-universal-drop-links-12mm-rod-ends-283-322mm","title":"Hardrace Adjustable Universal Drop Links 12mm Rod Ends 283-322mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 283-322mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 283-322mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 283-322mm\u003c\/li\u003e\n\u003cli\u003e12mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi: A3 (2nd Gen) 2003-2013, A3 (3rd Gen) 2012-2020, Q3 2011-Present, TT (2nd Gen) 2006-2014\u003c\/li\u003e\n\u003cli\u003eBMW: 5-Series (6th Gen) 2008-2017, 7-Series (5th Gen) 2008-2015\u003c\/li\u003e\n\u003cli\u003eFord: Focus (4th Gen) 2018-Present, Kuga (3rd Gen) 2019-Present, Mondeo (5th Gen) 2014-Present\u003c\/li\u003e\n\u003cli\u003eHyundai: Elantra (4th Gen) 2006-2011, Elantra (5th Gen) 2011-2015, Veloster (2nd Gen) 2017-Present, i30 (3rd Gen) 2017-Present\u003c\/li\u003e\n\u003cli\u003eMercedes-Benz: C-Class (3rd Gen) 2007-2015, E-Class (4th Gen) 2009-2017\u003c\/li\u003e\n\u003cli\u003eNissan: Juke 2010-Present, Murano (1st Gen) 2002-2008\u003c\/li\u003e\n\u003cli\u003eSaab: 95 2008-2010\u003c\/li\u003e\n\u003cli\u003eSeat: Altea 2004-2015, Leon (2nd Gen) 2005-2012, Toledo (3rd Gen) 2004-2009\u003c\/li\u003e\n\u003cli\u003eSkoda: Karoq 2017-Present, Kodiaq (1st Gen) 2016-2023, Kodiaq (2nd Gen) 2023-Present, Octavia (3rd Gen) 2012-Present, Octavia (4th Gen) 2019-Present, Superb (3rd Gen) 2015-2023, Superb (4th Gen) 2023-Present\u003c\/li\u003e\n\u003cli\u003eSubaru: Forester (5th Gen) 2018-2023, XV (2nd Gen) 2018-2022\u003c\/li\u003e\n\u003cli\u003eTesla: Model 3 2017-Present, Model Y 2020-Present\u003c\/li\u003e\n\u003cli\u003eToyota: Auris (1st Gen) 2006-2012, Auris (2nd Gen) 2012-Present, Corolla (10th Gen) 2007-2013, Corolla (11th Gen) 2013-Present, Corolla (9th Gen) 2002-2007, Prius (2nd Gen) 2003-2009\u003c\/li\u003e\n\u003cli\u003eVolkswagen: Caddy (4th Gen) 2020-Present, Golf (5th Gen) 2003-2009, Golf (6th Gen) 2008-2016, Golf (7th Gen) 2012-2020, Jetta (5th Gen) 2005-2010, Jetta (6th Gen) 2010-2018, Passat (6th Gen) 2005-2010, Passat (7th Gen) 2010-2014, Passat (8th Gen) 2014-2023, Passat (9th Gen) 2023-Present, Scirocco (3rd Gen) 2008-2017, Sharan (2nd Gen) 2010-Present, Tiguan (1st Gen) 2007-2016, Tiguan (2nd Gen) 2016-2025, Tiguan (3rd Gen) 2023-Present, Touran (2nd Gen) 2015-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e FOR LOWERED PQ35\/PQ46\/MQB Models (Front).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139413816,"sku":"HR-8793-300","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20172913494813r49d48py.jpg?v=1678899671"},{"product_id":"hardrace-adjustable-universal-drop-links-12mm-rod-ends-323-362mm","title":"Hardrace Adjustable Universal Drop Links 12mm Rod Ends 323-362mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 323-362mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 323-362mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 323-362mm\u003c\/li\u003e\n\u003cli\u003e12mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi: A3 (2nd Gen) 2003-2013, A3 (3rd Gen) 2012-2020, Q3 2011-Present, TT (2nd Gen) 2006-2014, TT (3rd Gen) 2014-Present\u003c\/li\u003e\n\u003cli\u003eHyundai: Santa Fe (2nd Gen) 2006-2012, Santa Fe (3rd Gen) 2012-2018\u003c\/li\u003e\n\u003cli\u003eInfiniti: Q30 (1st Gen) 2015-2019, QX30 2016-2019\u003c\/li\u003e\n\u003cli\u003eLexus: CT 2010-Present, NX 2014-Present, UX 2018-Present\u003c\/li\u003e\n\u003cli\u003eMercedes-Benz: A-Class (3rd Gen) 2012-2018, B-Class (2nd Gen) 2011-2019, CLA-Class (1st Gen) 2013-2019, GLA-Class (1st Gen) 2013-2020\u003c\/li\u003e\n\u003cli\u003eSaab: 9-3 (2nd Gen) 2004-2011, 9-3 (2nd Gen) 2004-2011 2003-2012\u003c\/li\u003e\n\u003cli\u003eSkoda: Karoq 2017-Present, Kodiaq (1st Gen) 2016-2023, Kodiaq (2nd Gen) 2023-Present, Octavia (3rd Gen) 2012-Present, Octavia (4th Gen) 2019-Present, Superb (3rd Gen) 2015-2023, Superb (4th Gen) 2023-Present\u003c\/li\u003e\n\u003cli\u003eToyota: C-HR (1st Gen) 2016-Present, Corolla (12th Gen) 2018-Present, Prius (3rd Gen) 2009-2016, Prius (4th Gen) 2016-2019, Prius (5th Gen) 2023-Present, RAV4 (3rd Gen) 2005-2013, RAV4 (4th Gen) 2013-2018, RAV4 (5th Gen) 2018-2025, Yaris (2nd Gen) 2005-2012\u003c\/li\u003e\n\u003cli\u003eVolkswagen: Caddy (4th Gen) 2020-Present, Golf (4th Gen) 1997-2006, Golf (5th Gen) 2003-2009, Golf (6th Gen) 2008-2016, Golf (7th Gen) 2012-2020, Jetta (5th Gen) 2005-2010, Jetta (6th Gen) 2010-2018, Passat (6th Gen) 2005-2010, Passat (7th Gen) 2010-2014, Passat (8th Gen) 2014-2023, Passat (9th Gen) 2023-Present, Scirocco (3rd Gen) 2008-2017, Sharan (2nd Gen) 2010-Present, Tiguan (1st Gen) 2007-2016, Tiguan (2nd Gen) 2016-2025, Tiguan (3rd Gen) 2023-Present, Touran (2nd Gen) 2015-Present\u003c\/li\u003e\n\u003cli\u003eVolvo: S60 (1st Gen) 2000-2009, S80 (1st Gen) 1998-2006, V70 (2nd Gen) 2000-2007, XC70 (1st Gen) 2000-2007\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e For PQ35\/PQ46\/MQB Models OE Replacement (Front).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139446584,"sku":"HR-8793-340","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/2017291350913s50l9lg.jpg?v=1678899672"},{"product_id":"hardrace-adjustable-universal-drop-links-12mm-rod-ends-90-degree-rotated-280-319mm","title":"Hardrace Adjustable Universal Drop Links 12mm Rod Ends 90 Degree Rotated 280-319mm","description":"\u003ch2\u003eHardrace Adjustable Universal Drop Links 12mm Rod Ends 90 Degree Rotated 280-319mm – Stronger Than The Factory Links\u003c\/h2\u003e\n\u003cp\u003eDrop links connect the anti-roll bar to the suspension, so any play in them delays the bar's response. This Hardrace drop link set is a stronger upgrade that keeps the anti-roll bar working instantly and precisely, for flatter, more controlled cornering.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStronger than the factory links\u003c\/li\u003e\n\u003cli\u003eQuicker anti-roll bar response\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eCheck the size and fitment against your car before ordering, or contact us if you are unsure.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely. Remove the factory part and fit the Hardrace part in its place, tightening all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height. Have the alignment checked after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139479352,"sku":"HR-7750-300","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201512992409u2d40ms_73b2e11f-4136-4014-8308-bbc1f75702a7.jpg?v=1678899673"},{"product_id":"hardrace-adjustable-universal-drop-links-10mm-rod-ends-320-359mm-honda-civic-type-r-fk8-17-21","title":"Hardrace Adjustable Universal Drop Links 10mm Rod Ends 320-359mm Honda","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 320-359mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 320-359mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 320-359mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop link\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo \/ XC90 (1st Gen) 2002-2014 \/ SUV 2002-2014 \/ XC90 2.5 Turbo 2002-2006\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC90 (1st Gen) 2002-2014 \/ SUV 2002-2014 \/ XC90 3.2 2006-2012\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC90 (1st Gen) 2002-2014 \/ SUV 2002-2014 \/ XC90 4.4 2005-2010\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC90 (1st Gen) 2002-2014 \/ SUV 2002-2014 \/ XC90 D3 2.4 TD 2010-2014\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC90 (1st Gen) 2002-2014 \/ SUV 2002-2014 \/ XC90 D4 2.4 TD 2010-2014\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC90 (1st Gen) 2002-2014 \/ SUV 2002-2014 \/ XC90 D5 2.4 TD 2002-2014\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC90 (1st Gen) 2002-2014 \/ SUV 2002-2014 \/ XC90 T6 2.9 Twin Turbo 2002-2006\u003c\/li\u003e\n\u003cli\u003eHonda \/ HR-V (3rd Gen) 2021-Present \/ SUV (RV) 2021-Present \/ HR-V 1.5 Hybrid 2021-Present\u003c\/li\u003e\n\u003cli\u003eHonda \/ Civic 5-Door Hatchback \/ 2022-Present \/ 2.0 Type-R (FL5)\u003c\/li\u003e\n\u003cli\u003eHonda \/ ZR-V 2023-Present \/ SUV 2023-Present \/ ZR-V Hybrid 2.0 Turbo 2023-Present\u003c\/li\u003e\n\u003cli\u003eMini \/ Countryman (3rd Gen) 2023-Present \/ SUV (U25) 2023-Present \/ Countryman 1.5 Turbo 2023-Present\u003c\/li\u003e\n\u003cli\u003eMini \/ Countryman (3rd Gen) 2023-Present \/ SUV (U25) 2023-Present \/ Countryman D 2.0 TD 2024-Present\u003c\/li\u003e\n\u003cli\u003eMini \/ Countryman (3rd Gen) 2023-Present \/ SUV (U25) 2023-Present \/ Countryman S 2.0 Turbo (4WD) 2023-Present\u003c\/li\u003e\n\u003cli\u003eMini \/ Countryman (3rd Gen) 2023-Present \/ SUV (U25) 2023-Present \/ Countrymen Electric 2024-Present\u003c\/li\u003e\n\u003cli\u003eMini \/ Countryman (3rd Gen) 2023-Present \/ SUV (U25) 2023-Present \/ Countrymen Electric SE (4WD) 2024-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139512120,"sku":"HR-8659-340","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201662413314813l31i48ha.jpg?v=1678899673"},{"product_id":"hardrace-adjustable-universal-stabilizers-links-10mm-rod-ends-2pc-set","title":"Hardrace Adjustable Universal Stabilisers Links 10mm Rod Ends","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 90-99mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 90-99mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 90-99mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop link\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSee title\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139544888,"sku":"HR-6405","price":106.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/2016112215404815m40k48su.jpg?v=1678899675"},{"product_id":"hardrace-universal-adjustable-drop-link-set-range-81-91mm-10mm-stud-rod-end","title":"Hardrace Universal Adjustable Drop Link Set Range 81-91mm 10mm Stud Rod End","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 81-91mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 81-91mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 81-91mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNissan \/ Murano (1st Gen) 2002-2008 \/ SUV (Z50) 2002-2008 \/ Murano 3.5 2002-2006\u003c\/li\u003e\n\u003cli\u003eNissan \/ Murano (1st Gen) 2002-2008 \/ SUV (Z50) 2002-2008 \/ Murano 3.5 2006-2008\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139610424,"sku":"HR-6853-080","price":106.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hard-race-drops_18.jpg?v=1678899675"},{"product_id":"hardrace-universal-adjustable-stabilizer-link-2pcs-set-range-220-259mm-10mm-stud-rod-end","title":"Hardrace Universal Adjustable Stabiliser Link 220-259mm 10mm Stud Rod End","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 220-259mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 220-259mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 220-259mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW \/ 3-Series (2nd Gen) \/ Convertible (E30) \/ 1982-1994\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (2nd Gen) \/ Sedan (E30) \/ 1982-1994\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (3rd Gen) \/ Compact (E36) \/ 1990-2000\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (3rd Gen) \/ Convertible (E36) \/ 1990-2000\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (3rd Gen) \/ Coupe (E36) \/ 1990-2000\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (3rd Gen) \/ Sedan (E36) \/ 1990-2000\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (3rd Gen) \/ Touring (E36) \/ 1990-2000\u003c\/li\u003e\n\u003cli\u003eBMW \/ 5-Series (2nd Gen) \/ Sedan (E28) \/ 1980-1987\u003c\/li\u003e\n\u003cli\u003eBMW \/ 5-Series (3rd Gen) \/ Sedan (E34) \/ 1986-1997\u003c\/li\u003e\n\u003cli\u003eBMW \/ 5-Series (3rd Gen) \/ Touring (E34) \/ 1987-1997\u003c\/li\u003e\n\u003cli\u003eBMW \/ 7-Series (2nd Gen) \/ Sedan (E32) \/ 1986-1994\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e E30: For M3 use only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-universal-drop-links-bushes-10mm-id-4pc-set\"\u003eHardrace Universal Drop Links Bushes 10mm ID 4Pc Set\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139675960,"sku":"HR-8659-240","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/8659-240_main.jpg?v=1678899676"},{"product_id":"hardrace-universal-adjustable-drop-link-set-range-90-99mm-10mm-stud-rod-end","title":"Hardrace Universal Adjustable Drop Link Set Range 90-99mm 10mm Stud Rod End","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 90-99mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 90-99mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 90-99mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop link\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSee title\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139708728,"sku":"HR-6853-090","price":106.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hard-race-drops_16.jpg?v=1678899677"},{"product_id":"hardrace-universal-adjustable-stabilizer-link-range-320-359mm-10mm-stud-rod-end-2pcs-set","title":"Hardrace Universal Adjustable Stabiliser Link Range:320-359mm 10mm Stud","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 320-359mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 320-359mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 320-359mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop link\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSee title\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780140560696,"sku":"HR-8863-340","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/8863-340_main.jpg?v=1678899678"},{"product_id":"hardrace-adjustable-10mm-camber-bolts-2-to-2-degree-range","title":"Hardrace Adjustable 10mm Camber Bolts -2 To +2 Degree Range","description":"\u003ch2\u003eHardrace Adjustable Camber Bolts 10mm – Adjustable Camber\u003c\/h2\u003e\n\u003cp\u003eMany cars have no factory camber adjustment on the strut. These Hardrace adjustable camber bolts fit in place of the strut-to-hub bolts and let you adjust camber, so you can dial in the alignment after lowering for even tyre wear and more grip.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdds camber adjustment at the strut\u003c\/li\u003e\n\u003cli\u003eEven tyre wear and more grip after lowering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable camber bolts 10mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eUniversal. Suits struts that use 10mm strut-to-hub bolts. Measure your bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, remove the wheel and swap one of the strut-to-hub bolts at a time for a Hardrace camber bolt. Set the camber, tighten to the vehicle manufacturer's torque figures and have a full alignment done. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eHow much camber do they add?\u003c\/h3\u003e\n\u003cp\u003eThe amount depends on the car. Have a full alignment done after fitting to set the camber you want.\u003c\/p\u003e\n\u003ch3\u003eWill they fit my car?\u003c\/h3\u003e\n\u003cp\u003eCheck the bolt size against your strut-to-hub bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141117752,"sku":"HR-6700","price":53.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/6700.jpg?v=1678899679"},{"product_id":"hardrace-adjustable-12mm-camber-bolts-2-to-2-degree-range","title":"Hardrace Adjustable 12mm Camber Bolts -2 To +2 Degree Range","description":"\u003ch2\u003eHardrace Adjustable Camber Bolts 12mm – Adjustable Camber\u003c\/h2\u003e\n\u003cp\u003eMany cars have no factory camber adjustment on the strut. These Hardrace adjustable camber bolts fit in place of the strut-to-hub bolts and let you adjust camber, so you can dial in the alignment after lowering for even tyre wear and more grip.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdds camber adjustment at the strut\u003c\/li\u003e\n\u003cli\u003eEven tyre wear and more grip after lowering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable camber bolts 12mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eUniversal. Suits struts that use 12mm strut-to-hub bolts. Measure your bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, remove the wheel and swap one of the strut-to-hub bolts at a time for a Hardrace camber bolt. Set the camber, tighten to the vehicle manufacturer's torque figures and have a full alignment done. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-14mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 14mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-15mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 15mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-16mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 16mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow much camber do they add?\u003c\/h3\u003e\n\u003cp\u003eThe amount depends on the car. Have a full alignment done after fitting to set the camber you want.\u003c\/p\u003e\n\u003ch3\u003eWill they fit my car?\u003c\/h3\u003e\n\u003cp\u003eCheck the bolt size against your strut-to-hub bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141150520,"sku":"HR-6701","price":53.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/6701.jpg?v=1678899680"},{"product_id":"hardrace-adjustable-14mm-camber-bolts-2-to-2-degree-range","title":"Hardrace Adjustable 14mm Camber Bolts -2 To +2 Degree Range","description":"\u003ch2\u003eHardrace Adjustable Camber Bolts 14mm – Adjustable Camber\u003c\/h2\u003e\n\u003cp\u003eMany cars have no factory camber adjustment on the strut. These Hardrace adjustable camber bolts fit in place of the strut-to-hub bolts and let you adjust camber, so you can dial in the alignment after lowering for even tyre wear and more grip.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdds camber adjustment at the strut\u003c\/li\u003e\n\u003cli\u003eEven tyre wear and more grip after lowering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable camber bolts 14mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eUniversal. Suits struts that use 14mm strut-to-hub bolts. Measure your bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, remove the wheel and swap one of the strut-to-hub bolts at a time for a Hardrace camber bolt. Set the camber, tighten to the vehicle manufacturer's torque figures and have a full alignment done. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-12mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 12mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-15mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 15mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-16mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 16mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow much camber do they add?\u003c\/h3\u003e\n\u003cp\u003eThe amount depends on the car. Have a full alignment done after fitting to set the camber you want.\u003c\/p\u003e\n\u003ch3\u003eWill they fit my car?\u003c\/h3\u003e\n\u003cp\u003eCheck the bolt size against your strut-to-hub bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141183288,"sku":"HR-6702","price":53.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/6700_1.jpg?v=1678899680"},{"product_id":"hardrace-adjustable-15mm-camber-bolts-2-to-2-degree-range","title":"Hardrace Adjustable 15mm Camber Bolts -2 To +2 Degree Range","description":"\u003ch2\u003eHardrace Adjustable Camber Bolts 15mm – Adjustable Camber\u003c\/h2\u003e\n\u003cp\u003eMany cars have no factory camber adjustment on the strut. These Hardrace adjustable camber bolts fit in place of the strut-to-hub bolts and let you adjust camber, so you can dial in the alignment after lowering for even tyre wear and more grip.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdds camber adjustment at the strut\u003c\/li\u003e\n\u003cli\u003eEven tyre wear and more grip after lowering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable camber bolts 15mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eUniversal. Suits struts that use 15mm strut-to-hub bolts. Measure your bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, remove the wheel and swap one of the strut-to-hub bolts at a time for a Hardrace camber bolt. Set the camber, tighten to the vehicle manufacturer's torque figures and have a full alignment done. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-12mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 12mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-14mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 14mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-16mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 16mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow much camber do they add?\u003c\/h3\u003e\n\u003cp\u003eThe amount depends on the car. Have a full alignment done after fitting to set the camber you want.\u003c\/p\u003e\n\u003ch3\u003eWill they fit my car?\u003c\/h3\u003e\n\u003cp\u003eCheck the bolt size against your strut-to-hub bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141216056,"sku":"HR-6703","price":53.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/6700_2.jpg?v=1678899681"},{"product_id":"hardrace-adjustable-16mm-camber-bolts-2-to-2-degree-range","title":"Hardrace Adjustable 16mm Camber Bolts -2 To +2 Degree Range","description":"\u003ch2\u003eHardrace Adjustable Camber Bolts 16mm – Adjustable Camber\u003c\/h2\u003e\n\u003cp\u003eMany cars have no factory camber adjustment on the strut. These Hardrace adjustable camber bolts fit in place of the strut-to-hub bolts and let you adjust camber, so you can dial in the alignment after lowering for even tyre wear and more grip.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdds camber adjustment at the strut\u003c\/li\u003e\n\u003cli\u003eEven tyre wear and more grip after lowering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable camber bolts 16mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eUniversal. Suits struts that use 16mm strut-to-hub bolts. Measure your bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, remove the wheel and swap one of the strut-to-hub bolts at a time for a Hardrace camber bolt. Set the camber, tighten to the vehicle manufacturer's torque figures and have a full alignment done. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-12mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 12mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-14mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 14mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-15mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 15mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow much camber do they add?\u003c\/h3\u003e\n\u003cp\u003eThe amount depends on the car. Have a full alignment done after fitting to set the camber you want.\u003c\/p\u003e\n\u003ch3\u003eWill they fit my car?\u003c\/h3\u003e\n\u003cp\u003eCheck the bolt size against your strut-to-hub bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141248824,"sku":"HR-6704","price":53.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/6701_1.jpg?v=1678899683"},{"product_id":"hardrace-adjustable-17mm-camber-bolts-2-to-2-degree-range","title":"Hardrace Adjustable 17mm Camber Bolts -2 To +2 Degree Range","description":"\u003ch2\u003eHardrace Adjustable Camber Bolts 17mm – Adjustable Camber\u003c\/h2\u003e\n\u003cp\u003eMany cars have no factory camber adjustment on the strut. These Hardrace adjustable camber bolts fit in place of the strut-to-hub bolts and let you adjust camber, so you can dial in the alignment after lowering for even tyre wear and more grip.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdds camber adjustment at the strut\u003c\/li\u003e\n\u003cli\u003eEven tyre wear and more grip after lowering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable camber bolts 17mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eUniversal. Suits struts that use 17mm strut-to-hub bolts. Measure your bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, remove the wheel and swap one of the strut-to-hub bolts at a time for a Hardrace camber bolt. Set the camber, tighten to the vehicle manufacturer's torque figures and have a full alignment done. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-12mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 12mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-14mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 14mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-15mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 15mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow much camber do they add?\u003c\/h3\u003e\n\u003cp\u003eThe amount depends on the car. Have a full alignment done after fitting to set the camber you want.\u003c\/p\u003e\n\u003ch3\u003eWill they fit my car?\u003c\/h3\u003e\n\u003cp\u003eCheck the bolt size against your strut-to-hub bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141281592,"sku":"HR-6705","price":53.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/6700_3.jpg?v=1678899683"},{"product_id":"hardrace-rear-camber-toe-adjustable-spacer-red-camber-1-5-1-5-toe-1-5-1-5-2pcs-set","title":"Hardrace Rear Camber\/Toe Adjustable Spacer Red Camber\/Toe -1.5 -1.5 2Pcs","description":"\u003ch2\u003eHardrace Rear Camber\/Toe Adjustable Spacer Red Camber\/Toe -1.5 -1.5 – Corrects Rear Camber And Toe\u003c\/h2\u003e\n\u003cp\u003eLowering a car changes the rear alignment, often with no factory adjustment to correct it. This Hardrace adjusting spacer set corrects the camber and toe, for better tyre wear and more grip.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCorrects rear camber and toe\u003c\/li\u003e\n\u003cli\u003eBetter tyre wear and more grip\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eCheck the size and fitment against your car before ordering, or contact us if you are unsure.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely. Remove the factory part and fit the Hardrace part in its place, tightening all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height. Have the alignment checked after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141314360,"sku":"HR-6780","price":58.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hardrace-placeholder_6ed62565-b2f7-465c-b239-3d9155278135.jpg?v=1678899683"},{"product_id":"hardrace-rear-camber-toe-adjustable-spacer-blue-camber-1-5-1-5-toe-1-5-1-5-2pcs-set","title":"Hardrace Rear Camber\/Toe Adjustable Spacer Blue Camber\/Toe -1.5 -1.5 2Pcs","description":"\u003ch2\u003eHardrace Rear Camber\/Toe Adjustable Spacer Blue Camber\/Toe -1.5 -1.5 – Corrects Rear Camber And Toe\u003c\/h2\u003e\n\u003cp\u003eLowering a car changes the rear alignment, often with no factory adjustment to correct it. This Hardrace adjusting spacer set corrects the camber and toe, for better tyre wear and more grip.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCorrects rear camber and toe\u003c\/li\u003e\n\u003cli\u003eBetter tyre wear and more grip\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eCheck the size and fitment against your car before ordering, or contact us if you are unsure.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely. Remove the factory part and fit the Hardrace part in its place, tightening all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height. Have the alignment checked after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141379896,"sku":"HR-7485","price":48.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hardrace-placeholder_f89ffe91-cd0a-44f7-9d20-d02f44a769de.jpg?v=1678899685"},{"product_id":"hardrace-rear-camber-toe-adjustable-spacer-grey-camber-1-5-1-5-toe-1-5-1-5-2pcs-set","title":"Hardrace Rear Camber\/Toe Adjustable Spacer Grey Camber:-1.5 ~ -1.5\/Toe:-1.5 ~ -1.5 2Pcs","description":"\u003ch2\u003eHardrace Rear Camber\/Toe Adjustable Spacer Grey Camber:-1.5 ~ -1.5\/Toe:-1.5 ~ -1.5 – Corrects Rear Camber And Toe\u003c\/h2\u003e\n\u003cp\u003eLowering a car changes the rear alignment, often with no factory adjustment to correct it. This Hardrace adjusting spacer set corrects the camber and toe, for better tyre wear and more grip.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCorrects rear camber and toe\u003c\/li\u003e\n\u003cli\u003eBetter tyre wear and more grip\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eCheck the size and fitment against your car before ordering, or contact us if you are unsure.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely. Remove the factory part and fit the Hardrace part in its place, tightening all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height. Have the alignment checked after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141609272,"sku":"HR-7486","price":48.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hardrace-placeholder_1fd92285-ca9a-4e8b-b6ce-ef3b1fdd9687.jpg?v=1678899686"},{"product_id":"hardrace-rear-camber-toe-adjustable-spacer-yellow-camber-1-5-1-5-toe-1-5-1-5-2pcs-set","title":"Hardrace Rear Camber\/Toe Adjustable Spacer Yellow Camber:-1.5 ~ -1.5\/Toe:-1.5 ~ -1.5 2Pcs","description":"\u003ch2\u003eHardrace Rear Camber\/Toe Adjustable Spacer Yellow Camber:-1.5 ~ -1.5\/Toe:-1.5 ~ -1.5 – Corrects Rear Camber And Toe\u003c\/h2\u003e\n\u003cp\u003eLowering a car changes the rear alignment, often with no factory adjustment to correct it. This Hardrace adjusting spacer set corrects the camber and toe, for better tyre wear and more grip.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCorrects rear camber and toe\u003c\/li\u003e\n\u003cli\u003eBetter tyre wear and more grip\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eCheck the size and fitment against your car before ordering, or contact us if you are unsure.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely. Remove the factory part and fit the Hardrace part in its place, tightening all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height. Have the alignment checked after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141642040,"sku":"HR-7487","price":48.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hardrace-placeholder_0a1bba97-88d5-4f3d-8da3-c7b3e67cac32.jpg?v=1678899686"},{"product_id":"hardrace-19mm-stabilizer-locking-ring","title":"Hardrace 19mm Stabilizer Locking Ring","description":"\u003ch2\u003eHardrace Stabiliser Locking Ring – Stops the anti-roll bar sliding sideways\u003c\/h2\u003e\n\u003cp\u003eThese Hardrace anti-roll bar locking rings clamp onto the bar either side of its bushes, stopping the bar sliding sideways so it stays centred and works consistently.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStops the anti-roll bar sliding sideways\u003c\/li\u003e\n\u003cli\u003eUniversal design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStabiliser locking ring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eUniversal. Check the size against your car before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the vehicle safely. Remove the factory part where fitted and install the Hardrace part, tightening all fixings to the vehicle manufacturer's torque figures. Have the alignment checked after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-universal-drop-links-bushes-10mm-id-4pc-set\"\u003eHardrace Universal Drop Links Bushes 10mm ID 4Pc Set\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-25-4mm-stabilizer-locking-ring\"\u003eHardrace 25.4mm Stabilizer Locking Ring\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-28mm-stabilizer-locking-ring\"\u003eHardrace 28mm Stabilizer Locking Ring\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141674808,"sku":"HR-8959-19","price":30.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201783011395811r39n58fb.jpg?v=1678899687"},{"product_id":"hardrace-25-4mm-stabilizer-locking-ring","title":"Hardrace 25.4mm Stabilizer Locking Ring","description":"\u003ch2\u003eHardrace Stabiliser Locking Ring – Stops the anti-roll bar sliding sideways\u003c\/h2\u003e\n\u003cp\u003eThese Hardrace anti-roll bar locking rings clamp onto the bar either side of its bushes, stopping the bar sliding sideways so it stays centred and works consistently.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStops the anti-roll bar sliding sideways\u003c\/li\u003e\n\u003cli\u003eUniversal design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStabiliser locking ring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eUniversal. Check the size against your car before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the vehicle safely. Remove the factory part where fitted and install the Hardrace part, tightening all fixings to the vehicle manufacturer's torque figures. Have the alignment checked after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-universal-drop-links-bushes-10mm-id-4pc-set\"\u003eHardrace Universal Drop Links Bushes 10mm ID 4Pc Set\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-19mm-stabilizer-locking-ring\"\u003eHardrace 19mm Stabilizer Locking Ring\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-28mm-stabilizer-locking-ring\"\u003eHardrace 28mm Stabilizer Locking Ring\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141740344,"sku":"HR-8959-25.4","price":30.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201791110394410d39w44xt.jpg?v=1678899690"},{"product_id":"hardrace-28mm-stabilizer-locking-ring","title":"Hardrace 28mm Stabilizer Locking Ring","description":"\u003ch2\u003eHardrace Stabiliser Locking Ring – Stops the anti-roll bar sliding sideways\u003c\/h2\u003e\n\u003cp\u003eThese Hardrace anti-roll bar locking rings clamp onto the bar either side of its bushes, stopping the bar sliding sideways so it stays centred and works consistently.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStops the anti-roll bar sliding sideways\u003c\/li\u003e\n\u003cli\u003eUniversal design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStabiliser locking ring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eUniversal. Check the size against your car before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the vehicle safely. Remove the factory part where fitted and install the Hardrace part, tightening all fixings to the vehicle manufacturer's torque figures. Have the alignment checked after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-universal-drop-links-bushes-10mm-id-4pc-set\"\u003eHardrace Universal Drop Links Bushes 10mm ID 4Pc Set\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-19mm-stabilizer-locking-ring\"\u003eHardrace 19mm Stabilizer Locking Ring\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-25-4mm-stabilizer-locking-ring\"\u003eHardrace 25.4mm Stabilizer Locking Ring\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141773112,"sku":"HR-8959-28","price":30.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201791110422010c42j20gf.jpg?v=1678899690"},{"product_id":"hardrace-30mm-stabilizer-locking-ring","title":"Hardrace 30mm Stabilizer Locking Ring","description":"\u003ch2\u003eHardrace Stabiliser Locking Ring – Stops the anti-roll bar sliding sideways\u003c\/h2\u003e\n\u003cp\u003eThese Hardrace anti-roll bar locking rings clamp onto the bar either side of its bushes, stopping the bar sliding sideways so it stays centred and works consistently.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStops the anti-roll bar sliding sideways\u003c\/li\u003e\n\u003cli\u003eUniversal design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStabiliser locking ring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eUniversal. Check the size against your car before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the vehicle safely. Remove the factory part where fitted and install the Hardrace part, tightening all fixings to the vehicle manufacturer's torque figures. Have the alignment checked after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-universal-drop-links-bushes-10mm-id-4pc-set\"\u003eHardrace Universal Drop Links Bushes 10mm ID 4Pc Set\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-19mm-stabilizer-locking-ring\"\u003eHardrace 19mm Stabilizer Locking Ring\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-25-4mm-stabilizer-locking-ring\"\u003eHardrace 25.4mm Stabilizer Locking Ring\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141805880,"sku":"HR-8959-30","price":30.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201791815525415q52w54rc.jpg?v=1678899690"},{"product_id":"hardrace-universal-drop-links-bushes-8mm-id-4pc-set","title":"Hardrace Universal Drop Links Bushes 8mm ID 4Pc Set","description":"\u003ch2\u003eHardrace Universal Drop Link Bushes – Less Play, Quicker Response\u003c\/h2\u003e\n\u003cp\u003eThese Hardrace universal drop link bushes are a firmer upgrade for bush-type drop links, sized for a 8mm rod. They cut play in the link so the anti-roll bar responds more quickly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer than standard drop link bushes\u003c\/li\u003e\n\u003cli\u003eCuts play in the link\u003c\/li\u003e\n\u003cli\u003e8mm ball stud\u003c\/li\u003e\n\u003cli\u003eSuits a 8mm rod\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal drop link bushes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e*universal Stabilizer related ACCESSORIES\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eRemove the drop link, fit the Hardrace bushes in place of the standard ones and refit the link, tightening to the correct torque with the car on its wheels. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141838648,"sku":"HR-6163","price":17.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hardrace-placeholder_4d70561e-8446-46dc-9a6a-7897ebc2de4e.jpg?v=1678899691"},{"product_id":"hardrace-universal-drop-links-bushes-10mm-id-4pc-set","title":"Hardrace Universal Drop Links Bushes 10mm ID","description":"\u003ch2\u003eHardrace Universal Drop Link Bushes – Less Play, Quicker Response\u003c\/h2\u003e\n\u003cp\u003eThese Hardrace universal drop link bushes are a firmer upgrade for bush-type drop links, sized for a 10mm rod. They cut play in the link so the anti-roll bar responds more quickly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer than standard drop link bushes\u003c\/li\u003e\n\u003cli\u003eCuts play in the link\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003cli\u003eSuits a 10mm rod\u003c\/li\u003e\n\u003cli\u003e4-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal drop link bushes (4 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e*universal Stabilizer related ACCESSORIES\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eRemove the drop link, fit the Hardrace bushes in place of the standard ones and refit the link, tightening to the correct torque with the car on its wheels. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141904184,"sku":"HR-6162","price":17.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/6162.jpg?v=1678899693"},{"product_id":"hardrace-sway-bar-bracket-center-to-center-77mm","title":"Hardrace Sway Bar Bracket Centre To Centre 77mm","description":"\u003ch2\u003eHardrace Sway Bar Bracket Centre To Centre 77mm – Uprated Hardrace Upgrade\u003c\/h2\u003e\n\u003cp\u003eThe body flexes under hard cornering, which blurs steering feel and lets the suspension geometry change. This Hardrace brace ties key mounting points together to stiffen the chassis.\u003c\/p\u003e\n\u003cp\u003eIt suits the Sway Bar Bracket Centre To Centre 77mm.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStiffens the chassis\u003c\/li\u003e\n\u003cli\u003eSharper steering response\u003c\/li\u003e\n\u003cli\u003eReduces body flex under load\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003eSuitable for road and track use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChassis brace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSee title\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eBolt the brace to the factory mounting points. Tighten all fixings to the vehicle manufacturer's torque figures with the suspension loaded at normal ride height. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need to drill anything?\u003c\/h3\u003e\n\u003cp\u003eNo, it bolts to the factory mounting points.\u003c\/p\u003e\n\u003ch3\u003eWill it reduce ground clearance?\u003c\/h3\u003e\n\u003cp\u003eUnderbody braces sit close to the existing subframe, but check clearance on heavily lowered cars.\u003c\/p\u003e\n\u003ch3\u003eWill I notice the difference?\u003c\/h3\u003e\n\u003cp\u003eMost owners notice sharper, more immediate steering, especially through quick direction changes.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141936952,"sku":"HR-7743","price":9.36,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/7743_main.jpg?v=1679390173"},{"product_id":"hardrace-replacement-rubber-bushing-for-8191-8225-1pcs-set","title":"Hardrace Replacement Rubber Bushing For #8191\/8225 1Pcs","description":"\u003ch2\u003eHardrace Replacement Bushes for HR-8191 – Genuine Hardrace Spare Part\u003c\/h2\u003e\n\u003cp\u003eThis is a genuine Hardrace replacement bushes for the Hardrace HR-8191. It lets you refresh the bushes on your Hardrace part without buying a whole new kit, so it keeps working as precisely as the day it was fitted.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGenuine Hardrace spare part\u003c\/li\u003e\n\u003cli\u003eMade for the Hardrace HR-8191\u003c\/li\u003e\n\u003cli\u003eRefreshes your Hardrace part without a full new kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReplacement bushes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFor the Hardrace HR-8191 only.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eRemove the Hardrace part from the car, take out the old bushes and fit the new one in its place. Refit the part and tighten all fixings to the vehicle manufacturer's torque figures. Have the alignment checked if the part affects the suspension geometry. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it fit the factory parts?\u003c\/h3\u003e\n\u003cp\u003eNo. It is made for the Hardrace HR-8191 only.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780149768504,"sku":"HR-RP-BS016","price":10.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hardrace-placeholder_a210a084-f907-4714-afb9-a7d97e5effb5.jpg?v=1678899788"},{"product_id":"hardrace-replacement-bushing-for-8571-q0009-2pcs-set","title":"Hardrace Replacement Bushing For #8571\/#Q0009 2Pcs","description":"\u003ch2\u003eHardrace Replacement Bushes for HR-8571, HR-Q0009 – Genuine Hardrace Spare Part\u003c\/h2\u003e\n\u003cp\u003eThis is a genuine Hardrace replacement bushes for the Hardrace HR-8571, HR-Q0009. It lets you refresh the bushes on your Hardrace part without buying a whole new kit, so it keeps working as precisely as the day it was fitted.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGenuine Hardrace spare part\u003c\/li\u003e\n\u003cli\u003eMade for the Hardrace HR-8571, HR-Q0009\u003c\/li\u003e\n\u003cli\u003eRefreshes your Hardrace part without a full new kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReplacement bushes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFor the Hardrace HR-8571, HR-Q0009 only.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eRemove the Hardrace part from the car, take out the old bushes and fit the new one in its place. Refit the part and tighten all fixings to the vehicle manufacturer's torque figures. Have the alignment checked if the part affects the suspension geometry. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it fit the factory parts?\u003c\/h3\u003e\n\u003cp\u003eNo. It is made for the Hardrace HR-8571, HR-Q0009 only.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780151800120,"sku":"HR-RP-8571-BS","price":35.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hardrace-placeholder_71f0d6b0-4131-49f0-b87b-11af5572eb42.jpg?v=1678899813"}],"url":"https:\/\/hardraceshop.com\/collections\/hardrace-hyundai-genesis-coupe-suspension-parts.oembed","provider":"Hardrace Shop","version":"1.0","type":"link"}