{"title":"Hardrace Infiniti Suspension Parts","description":"\u003cp\u003eHardrace Infiniti suspension parts for the FX35 (2002-2017), Q50 (2013 on), Q70, M37 and Q45 (2001-2010): hardened rubber and spherical camber kits, spherical rear toe arms and traction rods, adjustable rear trailing arms, front anti roll bars, strut bars, front lower arm bushes and a gearbox mount.\u003c\/p\u003e\u003cp\u003eThe biggest group is for the \u003ca href=\"\/collections\/hardrace-infiniti-fx-suspension-parts\"\u003eInfiniti FX\u003c\/a\u003e: hardened rubber front and rear upper camber kits for the 2008-2017 FX35, adjustable rear trailing arms, and bushes and a gearbox mount for the 2002-2008 car. The \u003ca href=\"\/collections\/hardrace-infiniti-q50-suspension-parts\"\u003eInfiniti Q50\u003c\/a\u003e gets strut bars for each engine plus two front anti roll bars, and the \u003ca href=\"\/collections\/hardrace-infiniti-m37-suspension-parts\"\u003eM37\u003c\/a\u003e gets spherical rear toe arms, a rear lower camber kit and traction rods. Filter with the registration lookup for your Infiniti. Free UK delivery over £100.\u003c\/p\u003e\u003cp\u003eShop Hardrace Infiniti parts by model: \u003ca href=\"\/collections\/hardrace-infiniti-fx-suspension-parts\"\u003eFX\u003c\/a\u003e, \u003ca href=\"\/collections\/hardrace-infiniti-q50-suspension-parts\"\u003eQ50\u003c\/a\u003e, \u003ca href=\"\/collections\/hardrace-infiniti-m37-suspension-parts\"\u003eM37\u003c\/a\u003e, \u003ca href=\"\/collections\/hardrace-infiniti-q45-suspension-parts\"\u003eQ45\u003c\/a\u003e, \u003ca href=\"\/collections\/hardrace-infiniti-q70-suspension-parts\"\u003eQ70\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"hardrace-adjustable-rear-trailing-arm-with-hardened-rubber-bushes-2pc-set-infiniti-fx35-08-17","title":"Hardrace Adjustable Rear Trailing Arm Hardened Rubber Infiniti 08-17","description":"\u003ch2\u003eHardrace Adjustable Rear Trailing Arm for Infiniti FX S51 (2008-2013) – Firmer Location, Adjustable Alignment\u003c\/h2\u003e\n\u003cp\u003eThe rear links set the rear wheel alignment, and soft factory bushes let it change under load. These Hardrace adjustable rear trailing arm are an upgrade that holds the rear wheels firmly, and lets you adjust the toe or camber to get the alignment right on a lowered car, for more stable, predictable handling.\u003c\/p\u003e\n\u003cp\u003eIt uses hardened rubber bushes, firmer than standard but still able to absorb vibration.\u003c\/p\u003e\n\u003cp\u003eIt suits the Infiniti FX S51 (2008-2013).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable length for alignment\u003c\/li\u003e\n\u003cli\u003eHolds the rear alignment firmly\u003c\/li\u003e\n\u003cli\u003eMore stable, predictable handling\u003c\/li\u003e\n\u003cli\u003eHardened rubber bushes\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable rear trailing arm (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInfiniti \/ FX (2nd Gen) 2008-2013 \/ SUV (S51) 2008-2013 \/ FX30D 3.0 TD 2010-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ FX (2nd Gen) 2008-2013 \/ SUV (S51) 2008-2013 \/ FX37 3.7 2008-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ FX (2nd Gen) 2008-2013 \/ SUV (S51) 2008-2013 \/ FX50 5.0 2008-2013\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the vehicle safely on axle stands or a ramp. Remove the factory part and fit the Hardrace part in its place, setting adjustable parts to the factory length to start. Tighten all fixings to the vehicle manufacturer's torque figures with the vehicle on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-rear-trailing-arm-with-spherical-bearings-2pc-set-infiniti-fx35-08-17\"\u003eHardrace Adjustable Rear Trailing Arm With Spherical Bearings 2Pc Set Infiniti FX35 08-17\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-front-upper-camber-kit-with-hardened-rubber-bushes-2pc-set-infiniti-fx35-08-17\"\u003eHardrace Adjustable Front Upper Camber Kit With Hardened Rubber Bushes 2Pc Set Infiniti FX\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-rear-upper-camber-kit-with-hardened-rubber-bushes-2pc-set-infiniti-fx35-08-17\"\u003eHardrace Adjustable Rear Upper Camber Kit With Hardened Rubber Bushes 2Pc Set Infiniti FX3\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes, have a full alignment done after fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eOnly slightly. The hardened rubber is firmer than standard but still absorbs vibration, so it stays comfortable for everyday driving.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780014502200,"sku":"HR-8534","price":239.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20161514364614v36f46ry.jpg?v=1678898125"},{"product_id":"hardrace-adjustable-rear-trailing-arm-with-spherical-bearings-2pc-set-infiniti-fx35-08-17","title":"Hardrace Adjustable Rear Trailing Arm Spherical Infiniti 08-17","description":"\u003ch2\u003eHardrace Adjustable Rear Trailing Arms Pillow Ball for Infiniti FX S51 (2008-2013) – Adjustable Geometry, Sharper Handling\u003c\/h2\u003e\n\u003cp\u003eThe trailing arms locate the rear wheels front to back, and soft factory bushes let them move under power and braking. These Hardrace rear trailing arms are an upgrade over the factory parts. Each one locates the suspension far more firmly, so the car feels sharper and more consistent through corners and over bumps.\u003c\/p\u003e\n\u003cp\u003eThey use pillow ball (spherical) joints, which give precise, direct feedback with no rubber deflection. The length is adjustable, so you can fine-tune the geometry.\u003c\/p\u003e\n\u003cp\u003eIt suits the Infiniti FX (2nd Gen) 2008-2013.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer suspension location than the factory arms\u003c\/li\u003e\n\u003cli\u003eSharper, more consistent handling\u003c\/li\u003e\n\u003cli\u003eAdjustable length to fine-tune the geometry\u003c\/li\u003e\n\u003cli\u003ePillow ball joints for zero deflection\u003c\/li\u003e\n\u003cli\u003eHigh-strength steel construction\u003c\/li\u003e\n\u003cli\u003eSupplied complete with bushes or joints fitted, so no press is needed\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear trailing arms (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInfiniti \/ FX (2nd Gen) 2008-2013 \/ SUV (S51) 2008-2013 \/ FX30D 3.0 TD 2010-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ FX (2nd Gen) 2008-2013 \/ SUV (S51) 2008-2013 \/ FX37 3.7 2008-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ FX (2nd Gen) 2008-2013 \/ SUV (S51) 2008-2013 \/ FX50 5.0 2008-2013\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on axle stands or a ramp. Remove the factory arm and bolt the Hardrace arm in its place; it comes complete with its bushes or joints fitted, so no press is needed. Set adjustable arms to the same length as the factory parts to start. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-rear-trailing-arm-with-hardened-rubber-bushes-2pc-set-infiniti-fx35-08-17\"\u003eHardrace Adjustable Rear Trailing Arm With Hardened Rubber Bushes 2Pc Set Infiniti FX35 08\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-front-upper-camber-kit-with-hardened-rubber-bushes-2pc-set-infiniti-fx35-08-17\"\u003eHardrace Adjustable Front Upper Camber Kit With Hardened Rubber Bushes 2Pc Set Infiniti FX\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-rear-upper-camber-kit-with-hardened-rubber-bushes-2pc-set-infiniti-fx35-08-17\"\u003eHardrace Adjustable Rear Upper Camber Kit With Hardened Rubber Bushes 2Pc Set Infiniti FX3\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes. Have a full four-wheel alignment done after fitting, and use it to set the adjustable arms to the settings you want.\u003c\/p\u003e\n\u003ch3\u003eDoes it come with the bushes fitted?\u003c\/h3\u003e\n\u003cp\u003eYes. The arm comes complete with its bushes or joints already fitted, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003ePillow ball joints pass on a little more noise and vibration than rubber bushes, but there is no rubber flex, so the handling is far more precise.\u003c\/p\u003e\n\u003ch3\u003eHow is it adjusted?\u003c\/h3\u003e\n\u003cp\u003eThe arm length is set with the adjuster and locked with lock nuts. Set it to the factory length first, then fine-tune it during the alignment.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780014534968,"sku":"HR-8532","price":279.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20161513555613n55y56wb.jpg?v=1678898125"},{"product_id":"hardrace-adjustable-front-upper-camber-kit-with-hardened-rubber-bushes-2pc-set-infiniti-fx35-08-17","title":"Hardrace Front Upper Camber Kit Hardened Rubber Infiniti FX35 08-17","description":"\u003ch2\u003eHardrace Front Upper Camber Kit Hardened Rubber for Infiniti FX S51 (2008-2013) – Adjustable Camber, More Grip\u003c\/h2\u003e\n\u003cp\u003eLowering a car pulls in negative camber that the factory arms can't correct, which wears the inner edge of the tyres and costs grip. This Hardrace front upper camber kit is an upgrade over the factory arms. It lets you set camber exactly where you want it, so the tyres wear evenly and grip better.\u003c\/p\u003e\n\u003cp\u003eThe arms use hardened rubber bushes, a high-strength, anti-crack compound that is firmer than the factory bushes but still absorbs vibration.\u003c\/p\u003e\n\u003cp\u003eIt suits the Infiniti FX (2nd Gen) 2008-2013.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable camber\u003c\/li\u003e\n\u003cli\u003eCorrects camber after lowering for even tyre wear\u003c\/li\u003e\n\u003cli\u003eHardened rubber bushes for firm, quiet control\u003c\/li\u003e\n\u003cli\u003eHigh-strength steel construction\u003c\/li\u003e\n\u003cli\u003eSupplied complete with bushes or joints fitted, so no press is needed\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront upper camber arms (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInfiniti \/ FX (2nd Gen) 2008-2013 \/ SUV (S51) 2008-2013 \/ FX30D 3.0 TD 2010-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ FX (2nd Gen) 2008-2013 \/ SUV (S51) 2008-2013 \/ FX37 3.7 2008-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ FX (2nd Gen) 2008-2013 \/ SUV (S51) 2008-2013 \/ FX50 5.0 2008-2013\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on axle stands or a ramp. Remove the factory arm and bolt the Hardrace arm in its place; it comes complete with its bushes or joints fitted, so no press is needed. Set adjustable arms to the same length as the factory parts to start. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-rear-trailing-arm-with-spherical-bearings-2pc-set-infiniti-fx35-08-17\"\u003eHardrace Adjustable Rear Trailing Arm With Spherical Bearings 2Pc Set Infiniti FX35 08-17\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-rear-trailing-arm-with-hardened-rubber-bushes-2pc-set-infiniti-fx35-08-17\"\u003eHardrace Adjustable Rear Trailing Arm With Hardened Rubber Bushes 2Pc Set Infiniti FX35 08\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-rear-upper-camber-kit-with-hardened-rubber-bushes-2pc-set-infiniti-fx35-08-17\"\u003eHardrace Adjustable Rear Upper Camber Kit With Hardened Rubber Bushes 2Pc Set Infiniti FX3\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes. Have a full four-wheel alignment done after fitting, and use it to set the adjustable arms to the settings you want.\u003c\/p\u003e\n\u003ch3\u003eDoes it come with the bushes fitted?\u003c\/h3\u003e\n\u003cp\u003eYes. The arm comes complete with its bushes or joints already fitted, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eOnly slightly. The hardened rubber is firmer than the factory bushes but still absorbs vibration, so it stays comfortable for everyday driving.\u003c\/p\u003e\n\u003ch3\u003eHow much camber should I run?\u003c\/h3\u003e\n\u003cp\u003eFor road use, stay close to the manufacturer's figures or slightly more negative. Track cars often run more, but this increases inner tyre wear on the road.\u003c\/p\u003e\n\u003ch3\u003eDo I need it on a standard-height car?\u003c\/h3\u003e\n\u003cp\u003eIt is most useful on lowered cars, where it brings the geometry back into spec. On a standard car it still gives firmer location and finer adjustment than the factory parts.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780014567736,"sku":"HR-7799","price":532.08,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20158251313213k13h2ys.jpg?v=1678898126"},{"product_id":"hardrace-adjustable-rear-upper-camber-kit-with-hardened-rubber-bushes-2pc-set-infiniti-fx35-08-17","title":"Hardrace Rear Upper Camber Kit Hardened Rubber Infiniti FX35 08-17","description":"\u003ch2\u003eHardrace Rear Upper Camber Kit Hardened Rubber for Infiniti FX S51 (2008-2013) – Adjustable Camber, More Grip\u003c\/h2\u003e\n\u003cp\u003eLowering a car pulls in negative camber that the factory arms can't correct, which wears the inner edge of the tyres and costs grip. This Hardrace rear upper camber kit is an upgrade over the factory arms. It lets you set camber exactly where you want it, so the tyres wear evenly and grip better.\u003c\/p\u003e\n\u003cp\u003eThe arms use hardened rubber bushes, a high-strength, anti-crack compound that is firmer than the factory bushes but still absorbs vibration.\u003c\/p\u003e\n\u003cp\u003eIt suits the Infiniti FX (2nd Gen) 2008-2013.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable camber\u003c\/li\u003e\n\u003cli\u003eCorrects camber after lowering for even tyre wear\u003c\/li\u003e\n\u003cli\u003eHardened rubber bushes for firm, quiet control\u003c\/li\u003e\n\u003cli\u003eHigh-strength steel construction\u003c\/li\u003e\n\u003cli\u003eSupplied complete with bushes or joints fitted, so no press is needed\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear upper camber arms (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInfiniti \/ FX (2nd Gen) 2008-2013 \/ SUV (S51) 2008-2013 \/ FX30D 3.0 TD 2010-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ FX (2nd Gen) 2008-2013 \/ SUV (S51) 2008-2013 \/ FX37 3.7 2008-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ FX (2nd Gen) 2008-2013 \/ SUV (S51) 2008-2013 \/ FX50 5.0 2008-2013\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on axle stands or a ramp. Remove the factory arm and bolt the Hardrace arm in its place; it comes complete with its bushes or joints fitted, so no press is needed. Set adjustable arms to the same length as the factory parts to start. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-rear-trailing-arm-with-spherical-bearings-2pc-set-infiniti-fx35-08-17\"\u003eHardrace Adjustable Rear Trailing Arm With Spherical Bearings 2Pc Set Infiniti FX35 08-17\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-rear-trailing-arm-with-hardened-rubber-bushes-2pc-set-infiniti-fx35-08-17\"\u003eHardrace Adjustable Rear Trailing Arm With Hardened Rubber Bushes 2Pc Set Infiniti FX35 08\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-front-upper-camber-kit-with-hardened-rubber-bushes-2pc-set-infiniti-fx35-08-17\"\u003eHardrace Adjustable Front Upper Camber Kit With Hardened Rubber Bushes 2Pc Set Infiniti FX\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes. Have a full four-wheel alignment done after fitting, and use it to set the adjustable arms to the settings you want.\u003c\/p\u003e\n\u003ch3\u003eDoes it come with the bushes fitted?\u003c\/h3\u003e\n\u003cp\u003eYes. The arm comes complete with its bushes or joints already fitted, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eOnly slightly. The hardened rubber is firmer than the factory bushes but still absorbs vibration, so it stays comfortable for everyday driving.\u003c\/p\u003e\n\u003ch3\u003eHow much camber should I run?\u003c\/h3\u003e\n\u003cp\u003eFor road use, stay close to the manufacturer's figures or slightly more negative. Track cars often run more, but this increases inner tyre wear on the road.\u003c\/p\u003e\n\u003ch3\u003eDo I need it on a standard-height car?\u003c\/h3\u003e\n\u003cp\u003eIt is most useful on lowered cars, where it brings the geometry back into spec. On a standard car it still gives firmer location and finer adjustment than the factory parts.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780014600504,"sku":"HR-7800","price":798.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201591710473810f47v38gp.jpg?v=1678898126"},{"product_id":"hardrace-rear-side-gearbox-mount-1pc-infiniti-fx35-02-08","title":"Hardrace Rear Side Gearbox Mount Infiniti FX35 02-08","description":"\u003ch2\u003eHardrace Hardened Rear Side Transmission Mount AWD for Infiniti FX S50 (2003-2008) – Less Engine Movement, Sharper Response\u003c\/h2\u003e\n\u003cp\u003eSoft factory mounts let the engine and gearbox rock under acceleration, braking and gear changes, which blunts throttle response, makes shifts vague and can cause wheel hop. This Hardrace hardened rear side transmission mount is a firmer upgrade that holds the drivetrain in place, so power goes down more cleanly and the car feels tighter and more responsive.\u003c\/p\u003e\n\u003cp\u003eIt uses hardened rubber, a high-strength, anti-crack compound that is firmer than the factory rubber but still absorbs some vibration.\u003c\/p\u003e\n\u003cp\u003eIt suits the Infiniti FX S50 (2003-2008).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer than the factory mount\u003c\/li\u003e\n\u003cli\u003eLess engine and gearbox movement\u003c\/li\u003e\n\u003cli\u003eSharper throttle response and more precise gear changes\u003c\/li\u003e\n\u003cli\u003eHelps reduce wheel hop\u003c\/li\u003e\n\u003cli\u003eHardened rubber: firm but still absorbs vibration\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHardened rear side transmission mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInfiniti \/ FX (1st Gen) 2003-2008 \/ SUV (S50) 2003-2008 \/ FX35 3.5 2003-2005\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ FX (1st Gen) 2003-2008 \/ SUV (S50) 2003-2008 \/ FX35 3.5 2006-2008\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ FX (1st Gen) 2003-2008 \/ SUV (S50) 2003-2008 \/ FX45 4.5 2003-2005\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ FX (1st Gen) 2003-2008 \/ SUV (S50) 2003-2008 \/ FX45 4.5 2006-2008\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the engine and gearbox with a jack or engine support bar before undoing any mount, and work on one mount at a time so the drivetrain stays aligned. Remove the factory mount and bolt the Hardrace mount in its place. Tighten all fixings to the vehicle manufacturer's torque figures. Expect a little more vibration than standard. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it increase vibration?\u003c\/h3\u003e\n\u003cp\u003eYes, a little. Firmer mounts pass more engine vibration into the cabin, especially at idle.\u003c\/p\u003e\n\u003ch3\u003eShould I upgrade all the mounts at once?\u003c\/h3\u003e\n\u003cp\u003eUpgrading the matching mounts together gives the most consistent result, but each mount can be fitted on its own.\u003c\/p\u003e\n\u003ch3\u003eDoes it come ready to fit?\u003c\/h3\u003e\n\u003cp\u003eYes. It is a complete mount, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780014633272,"sku":"HR-Q0050","price":155.22,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201811191472314u7s23bc.jpg?v=1678898128"},{"product_id":"hardrace-race-series-adjustable-rear-camber-kit-2pc-set-infiniti-q45-01-10","title":"Hardrace Race Series Adjustable Rear Camber Kit Infiniti Q45 01-10","description":"\u003ch2\u003eHardrace Race Series Rear Camber Kit for Infiniti Q45 F50 (2001-2006) and Nissan Cima (2001-2010) – Adjustable Camber, More Grip\u003c\/h2\u003e\n\u003cp\u003eLowering a car pulls in negative camber that the factory arms can't correct, which wears the inner edge of the tyres and costs grip. This Hardrace rear camber kit is an upgrade over the factory arms. It lets you set camber exactly where you want it, so the tyres wear evenly and grip better.\u003c\/p\u003e\n\u003cp\u003eThe arms use pillow ball (spherical) joints, which give precise, direct feedback with no rubber deflection.\u003c\/p\u003e\n\u003cp\u003eIt suits the Infiniti Q45 3rd F50 2001–2006 and Nissan CIMA 2001-2010.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable camber\u003c\/li\u003e\n\u003cli\u003eCorrects camber after lowering for even tyre wear\u003c\/li\u003e\n\u003cli\u003ePillow ball joints for zero deflection\u003c\/li\u003e\n\u003cli\u003eHigh-strength steel construction\u003c\/li\u003e\n\u003cli\u003eSupplied complete with bushes or joints fitted, so no press is needed\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear camber arms (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInfiniti Q45 3rd F50 2001–2006\u003c\/li\u003e\n\u003cli\u003eNissan CIMA 2001-2010\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on axle stands or a ramp. Remove the factory arm and bolt the Hardrace arm in its place; it comes complete with its bushes or joints fitted, so no press is needed. Set adjustable arms to the same length as the factory parts to start. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-street-series-adjustable-rear-camber-kit-arm-infiniti-q45-01-10\"\u003eHardrace Street Series Adjustable Rear Camber Kit Arm Infiniti Q45 01-10\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes. Have a full four-wheel alignment done after fitting, and use it to set the adjustable arms to the settings you want.\u003c\/p\u003e\n\u003ch3\u003eDoes it come with the bushes fitted?\u003c\/h3\u003e\n\u003cp\u003eYes. The arm comes complete with its bushes or joints already fitted, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003ePillow ball joints pass on a little more noise and vibration than rubber bushes, but there is no rubber flex, so the handling is far more precise.\u003c\/p\u003e\n\u003ch3\u003eHow much camber should I run?\u003c\/h3\u003e\n\u003cp\u003eFor road use, stay close to the manufacturer's figures or slightly more negative. Track cars often run more, but this increases inner tyre wear on the road.\u003c\/p\u003e\n\u003ch3\u003eDo I need it on a standard-height car?\u003c\/h3\u003e\n\u003cp\u003eIt is most useful on lowered cars, where it brings the geometry back into spec. On a standard car it still gives firmer location and finer adjustment than the factory parts.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780014862648,"sku":"HR-8981","price":279.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/2017841114511t1m45zr.jpg?v=1678898133"},{"product_id":"hardrace-street-series-adjustable-rear-camber-kit-arm-infiniti-q45-01-10","title":"Hardrace Street Series Adjustable Rear Camber Kit Arm Infiniti Q45 01-10","description":"\u003ch2\u003eHardrace Street Series Rear Camber Kit for Infiniti Q45 F50 (2001-2006) and Nissan Cima (2001-2010) – Adjustable Camber, More Grip\u003c\/h2\u003e\n\u003cp\u003eLowering a car pulls in negative camber that the factory arms can't correct, which wears the inner edge of the tyres and costs grip. This Hardrace rear camber kit is an upgrade over the factory arms. It lets you set camber exactly where you want it, so the tyres wear evenly and grip better.\u003c\/p\u003e\n\u003cp\u003eThe arms use hardened rubber bushes, a high-strength, anti-crack compound that is firmer than the factory bushes but still absorbs vibration.\u003c\/p\u003e\n\u003cp\u003eIt suits the Infiniti Q45 3rd F50 2001–2006 and Nissan CIMA 2001-2010.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable camber\u003c\/li\u003e\n\u003cli\u003eCorrects camber after lowering for even tyre wear\u003c\/li\u003e\n\u003cli\u003eHardened rubber bushes for firm, quiet control\u003c\/li\u003e\n\u003cli\u003eHigh-strength steel construction\u003c\/li\u003e\n\u003cli\u003eSupplied complete with bushes or joints fitted, so no press is needed\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear camber arms (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInfiniti Q45 3rd F50 2001–2006\u003c\/li\u003e\n\u003cli\u003eNissan CIMA 2001-2010\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on axle stands or a ramp. Remove the factory arm and bolt the Hardrace arm in its place; it comes complete with its bushes or joints fitted, so no press is needed. Set adjustable arms to the same length as the factory parts to start. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-race-series-adjustable-rear-camber-kit-2pc-set-infiniti-q45-01-10\"\u003eHardrace Race Series Adjustable Rear Camber Kit 2Pc Set Infiniti Q45 01-10\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes. Have a full four-wheel alignment done after fitting, and use it to set the adjustable arms to the settings you want.\u003c\/p\u003e\n\u003ch3\u003eDoes it come with the bushes fitted?\u003c\/h3\u003e\n\u003cp\u003eYes. The arm comes complete with its bushes or joints already fitted, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eOnly slightly. The hardened rubber is firmer than the factory bushes but still absorbs vibration, so it stays comfortable for everyday driving.\u003c\/p\u003e\n\u003ch3\u003eHow much camber should I run?\u003c\/h3\u003e\n\u003cp\u003eFor road use, stay close to the manufacturer's figures or slightly more negative. Track cars often run more, but this increases inner tyre wear on the road.\u003c\/p\u003e\n\u003ch3\u003eDo I need it on a standard-height car?\u003c\/h3\u003e\n\u003cp\u003eIt is most useful on lowered cars, where it brings the geometry back into spec. On a standard car it still gives firmer location and finer adjustment than the factory parts.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780014895416,"sku":"HR-8982","price":239.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20178410581110u58j11ct.jpg?v=1678898134"},{"product_id":"hardrace-strut-bar-1pc-infiniti-q50-2-0t-14","title":"Hardrace Strut Bar Infiniti Q50 2.0T 14+","description":"\u003ch2\u003eHardrace Front Strut Brace for Infiniti Q50 V37 (2013-Present) – Sharper Steering, Stiffer Front End\u003c\/h2\u003e\n\u003cp\u003eUnder hard cornering the front strut towers flex, which blurs steering feel and lets the suspension geometry shift. This Hardrace front strut brace ties them together, so the front end stays stiff and the steering stays sharp and precise.\u003c\/p\u003e\n\u003cp\u003eIt bolts to existing mounting points with no cutting or drilling.\u003c\/p\u003e\n\u003cp\u003eIt suits the Infiniti Q50 V37 (2013-Present).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTies the strut towers together\u003c\/li\u003e\n\u003cli\u003eReduces body flex under cornering\u003c\/li\u003e\n\u003cli\u003eSharper, more precise steering\u003c\/li\u003e\n\u003cli\u003eBolts to existing mounting points\u003c\/li\u003e\n\u003cli\u003eNo cutting or drilling required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront strut brace\u003c\/li\u003e\n\u003cli\u003eFitting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInfiniti \/ Q50 (1st Gen) 2013-Present \/ Sedan (V37) 2013-Present \/ Q50 2.0 Turbo RWD 2014-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e FOR 2.0T USE.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eRemove the strut top nuts or mounting bolts, fit the brace over them and refit the nuts. Tighten to the vehicle manufacturer's torque figures with the car on its wheels, then check clearance around the bonnet and engine bay before driving. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-strut-bar-1pc-infiniti-q50-3-5-3-7-14\"\u003eHardrace Strut Bar 1Pc Infiniti Q50 3.5 3.7 14+\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. The brace does not change the suspension geometry.\u003c\/p\u003e\n\u003ch3\u003eWill it fit under the bonnet?\u003c\/h3\u003e\n\u003cp\u003eYes, it is designed to fit under the standard bonnet on the listed models. Check clearance around any aftermarket intake or engine parts.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eNo. A brace stiffens the chassis, not the suspension, so the ride comfort is largely unchanged.\u003c\/p\u003e\n\u003ch3\u003eCan I fit it with other braces?\u003c\/h3\u003e\n\u003cp\u003eYes. Combining front, middle and rear braces stiffens more of the chassis for an even tighter feel.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780014960952,"sku":"HR-8922","price":141.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/2018431611516f1m15pz.jpg?v=1678898136"},{"product_id":"hardrace-strut-bar-1pc-infiniti-q50-3-5-3-7-14","title":"Hardrace Strut Bar Infiniti Q50 3.5 3.7 14+","description":"\u003ch2\u003eHardrace Front Strut Bar for Infiniti Q50 V37 (2013-Present) – Sharper Steering, Stiffer Front End\u003c\/h2\u003e\n\u003cp\u003eUnder hard cornering the front strut towers flex, which blurs steering feel and lets the suspension geometry shift. This Hardrace front strut bar ties them together, so the front end stays stiff and the steering stays sharp and precise.\u003c\/p\u003e\n\u003cp\u003eIt bolts to existing mounting points with no cutting or drilling.\u003c\/p\u003e\n\u003cp\u003eIt suits the Infiniti Q50 V37 (2013-Present).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTies the strut towers together\u003c\/li\u003e\n\u003cli\u003eReduces body flex under cornering\u003c\/li\u003e\n\u003cli\u003eSharper, more precise steering\u003c\/li\u003e\n\u003cli\u003eBolts to existing mounting points\u003c\/li\u003e\n\u003cli\u003eNo cutting or drilling required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront strut bar\u003c\/li\u003e\n\u003cli\u003eFitting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInfiniti \/ Q50 (1st Gen) 2013-Present \/ Sedan (V37) 2013-Present \/ Q50 3.7 RWD 2013-Present\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ Q50 (1st Gen) 2013-Present \/ Sedan (V37) 2013-Present \/ Q50H Hybrid 3.5 RWD 2013-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e FOR 3.0T\/3.5 HYBRID\/3.7 USE.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eRemove the strut top nuts or mounting bolts, fit the brace over them and refit the nuts. Tighten to the vehicle manufacturer's torque figures with the car on its wheels, then check clearance around the bonnet and engine bay before driving. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-strut-bar-1pc-infiniti-q50-2-0t-14\"\u003eHardrace Strut Bar 1Pc Infiniti Q50 2.0T 14+\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. The brace does not change the suspension geometry.\u003c\/p\u003e\n\u003ch3\u003eWill it fit under the bonnet?\u003c\/h3\u003e\n\u003cp\u003eYes, it is designed to fit under the standard bonnet on the listed models. Check clearance around any aftermarket intake or engine parts.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eNo. A brace stiffens the chassis, not the suspension, so the ride comfort is largely unchanged.\u003c\/p\u003e\n\u003ch3\u003eCan I fit it with other braces?\u003c\/h3\u003e\n\u003cp\u003eYes. Combining front, middle and rear braces stiffens more of the chassis for an even tighter feel.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780014993720,"sku":"HR-8923","price":177.36,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201861913471413o47y14qq.jpg?v=1678898136"},{"product_id":"hardrace-25-4mm-front-anti-roll-bar-3pc-set-infiniti-q50-q70-14","title":"Hardrace 25.4mm Front Anti Roll Bar Infiniti Q50 Q70 14+","description":"\u003ch2\u003eHardrace 25.4mm Rear Anti Roll Bar for Infiniti M Y51 (2010-2013) – Flatter Cornering, Sharper Response\u003c\/h2\u003e\n\u003cp\u003eThe factory rear anti-roll bar is soft, so the car leans and pushes wide in corners. This Hardrace 25.4mm rear anti-roll bar is a stiffer upgrade that cuts rear body roll, which reduces understeer and helps the car rotate into corners.\u003c\/p\u003e\n\u003cp\u003eThe hollow design adds stiffness without adding much weight. It comes with mounting bushes.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e25.4mm rear bar for reduced body roll\u003c\/li\u003e\n\u003cli\u003eReduces understeer and helps the car rotate\u003c\/li\u003e\n\u003cli\u003eHollow design for stiffness without excess weight\u003c\/li\u003e\n\u003cli\u003eMounting bushes included\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e3-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e25.4mm rear anti-roll bar\u003c\/li\u003e\n\u003cli\u003eMounting bushes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e3 pieces in total.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInfiniti \/ M (4th Gen) 2010-2013 \/ Sedan (Y51) 2010-2013 \/ M30D 3.0 TD 2010-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ M (4th Gen) 2010-2013 \/ Sedan (Y51) 2010-2013 \/ M35H Hybrid 3.5 2010-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ M (4th Gen) 2010-2013 \/ Sedan (Y51) 2010-2013 \/ M37 3.7 2010-2013\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on a ramp or axle stands. Undo the drop links and bush brackets and remove the factory bar. Fit the Hardrace bar with its bushes, refit the brackets and links, and tighten everything to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. No wheel alignment is needed for the bar alone. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment after fitting?\u003c\/h3\u003e\n\u003cp\u003eNo. An anti-roll bar does not change camber, toe or caster. You only need an alignment if you change the ride height at the same time.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eA stiffer bar is felt mainly in corners and over bumps that hit one side of the car. Over bumps that hit both wheels evenly, the ride is largely unchanged.\u003c\/p\u003e\n\u003ch3\u003eCan I use my standard drop links?\u003c\/h3\u003e\n\u003cp\u003eYes. On a lowered car, adjustable drop links let you set the bar level at rest, so it is not pre-loaded.\u003c\/p\u003e\n\u003ch3\u003eShould I upgrade the front bar too?\u003c\/h3\u003e\n\u003cp\u003eUpgrading both ends cuts roll at both axles while keeping the balance closer to standard. Upgrading one end only shifts the balance: a stiffer front adds understeer, a stiffer rear adds oversteer.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780015092024,"sku":"HR-8683","price":248.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201611311563711c56i37lb.jpg?v=1678898137"},{"product_id":"hardrace-36mm-front-anti-roll-bar-3pc-set-infiniti-q50-14","title":"Hardrace 36mm Adjustable Front Anti Roll Bar Infiniti Q50 Skyline V37 13+","description":"\u003ch2\u003eHardrace 36mm Adjustable Front Anti Roll Bar for Infiniti Q50 V37 (2013-Present) – Flatter Cornering, Sharper Response\u003c\/h2\u003e\n\u003cp\u003eThe factory front anti-roll bar is built for comfort, so the car leans in corners and the steering feels slow to respond. This Hardrace 36mm front anti-roll bar is a stiffer upgrade that cuts body roll, so the car sits flatter, turns in more crisply and feels more composed through quick changes of direction.\u003c\/p\u003e\n\u003cp\u003eThe hollow design adds stiffness without adding much weight. It is heat treated for strength. It has adjustment, so you can fine-tune the roll stiffness to suit the road or track. It comes with mounting bushes.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e36mm front bar for reduced body roll\u003c\/li\u003e\n\u003cli\u003eSharper turn-in and flatter cornering\u003c\/li\u003e\n\u003cli\u003eAdjustable roll stiffness\u003c\/li\u003e\n\u003cli\u003eHollow design for stiffness without excess weight\u003c\/li\u003e\n\u003cli\u003eHeat treated for strength\u003c\/li\u003e\n\u003cli\u003eMounting bushes included\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e3-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e36mm front anti-roll bar\u003c\/li\u003e\n\u003cli\u003eMounting bushes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e3 pieces in total.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInfiniti \/ Q50 (1st Gen) 2013-Present \/ Sedan (V37) 2013-Present \/ Q50 2.0 Turbo AWD 2014-Present\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ Q50 (1st Gen) 2013-Present \/ Sedan (V37) 2013-Present \/ Q50 2.0 Turbo RWD 2014-Present\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ Q50 (1st Gen) 2013-Present \/ Sedan (V37) 2013-Present \/ Q50 2.2 TD RWD 2013-Present\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ Q50 (1st Gen) 2013-Present \/ Sedan (V37) 2013-Present \/ Q50 3.7 AWD 2013-Present\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ Q50 (1st Gen) 2013-Present \/ Sedan (V37) 2013-Present \/ Q50H Hybrid 3.5 AWD 2013-Present\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ Q50 (1st Gen) 2013-Present \/ Sedan (V37) 2013-Present \/ Q50S 3.0 Twin-Turbo AWD 2016-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e 36 mm Q50\/Skyline V37: For 4cyl \u0026amp; AWD 6cyl Engine Models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on a ramp or axle stands. Undo the drop links and bush brackets and remove the factory bar. Fit the Hardrace bar with its bushes, refit the brackets and links, and tighten everything to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Set both ends to the same adjustment hole to start. No wheel alignment is needed for the bar alone. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-25-4mm-front-anti-roll-bar-3pc-set-infiniti-q50-q70-14\"\u003eHardrace 25.4mm adjustable rear anti-roll bar for Q50\/Skyline V37\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-front-stabilizer-link-2pc-set-nissan-370z-z34-09\"\u003eHardrace adjustable front stabiliser links for Q50\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment after fitting?\u003c\/h3\u003e\n\u003cp\u003eNo. An anti-roll bar does not change camber, toe or caster. You only need an alignment if you change the ride height at the same time.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eA stiffer bar is felt mainly in corners and over bumps that hit one side of the car. Over bumps that hit both wheels evenly, the ride is largely unchanged.\u003c\/p\u003e\n\u003ch3\u003eWhich setting should I start on?\u003c\/h3\u003e\n\u003cp\u003eStart on the softest setting with both ends set the same, then go firmer if you want less roll.\u003c\/p\u003e\n\u003ch3\u003eCan I use my standard drop links?\u003c\/h3\u003e\n\u003cp\u003eYes. On a lowered car, adjustable drop links let you set the bar level at rest, so it is not pre-loaded.\u003c\/p\u003e\n\u003ch3\u003eShould I upgrade the rear bar too?\u003c\/h3\u003e\n\u003cp\u003eUpgrading both ends cuts roll at both axles while keeping the balance closer to standard. Upgrading one end only shifts the balance: a stiffer front adds understeer, a stiffer rear adds oversteer.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780015124792,"sku":"HR-8682","price":283.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201611416415016m41m50ff.jpg?v=1678898137"},{"product_id":"hardrace-front-upper-camber-kit-with-hardened-rubber-bushes-2pc-set-infiniti-q50-q70-14","title":"Hardrace Front Upper Camber Kit Hardened Rubber Infiniti Q50 10+","description":"\u003ch2\u003eHardrace Front Upper Camber Kit Hardened Rubber for Infiniti M Y51 (2010-2013) – Adjustable Camber, More Grip\u003c\/h2\u003e\n\u003cp\u003eLowering a car pulls in negative camber that the factory arms can't correct, which wears the inner edge of the tyres and costs grip. This Hardrace front upper camber kit is an upgrade over the factory arms. It lets you set camber exactly where you want it, so the tyres wear evenly and grip better.\u003c\/p\u003e\n\u003cp\u003eThe arms use hardened rubber bushes, a high-strength, anti-crack compound that is firmer than the factory bushes but still absorbs vibration.\u003c\/p\u003e\n\u003cp\u003eIt suits the Infiniti M (4th Gen) 2010-2013.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable camber\u003c\/li\u003e\n\u003cli\u003eCorrects camber after lowering for even tyre wear\u003c\/li\u003e\n\u003cli\u003eHardened rubber bushes for firm, quiet control\u003c\/li\u003e\n\u003cli\u003eHigh-strength steel construction\u003c\/li\u003e\n\u003cli\u003eSupplied complete with bushes or joints fitted, so no press is needed\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront upper camber arms (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInfiniti \/ M (4th Gen) 2010-2013 \/ Sedan (Y51) 2010-2013 \/ M30D 3.0 TD 2010-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ M (4th Gen) 2010-2013 \/ Sedan (Y51) 2010-2013 \/ M35H Hybrid 3.5 2010-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ M (4th Gen) 2010-2013 \/ Sedan (Y51) 2010-2013 \/ M37 3.7 2010-2013\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on axle stands or a ramp. Remove the factory arm and bolt the Hardrace arm in its place; it comes complete with its bushes or joints fitted, so no press is needed. Set adjustable arms to the same length as the factory parts to start. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes. Have a full four-wheel alignment done after fitting, and use it to set the adjustable arms to the settings you want.\u003c\/p\u003e\n\u003ch3\u003eDoes it come with the bushes fitted?\u003c\/h3\u003e\n\u003cp\u003eYes. The arm comes complete with its bushes or joints already fitted, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eOnly slightly. The hardened rubber is firmer than the factory bushes but still absorbs vibration, so it stays comfortable for everyday driving.\u003c\/p\u003e\n\u003ch3\u003eHow much camber should I run?\u003c\/h3\u003e\n\u003cp\u003eFor road use, stay close to the manufacturer's figures or slightly more negative. Track cars often run more, but this increases inner tyre wear on the road.\u003c\/p\u003e\n\u003ch3\u003eDo I need it on a standard-height car?\u003c\/h3\u003e\n\u003cp\u003eIt is most useful on lowered cars, where it brings the geometry back into spec. On a standard car it still gives firmer location and finer adjustment than the factory parts.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780015190328,"sku":"HR-7945","price":487.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20161131254512z5z45su.jpg?v=1678898139"},{"product_id":"hardrace-adjustable-rear-upper-camber-kit-with-spherical-bearings-2pc-set-nissan-350z-z33-370z-z34-infiniti-g35-g37","title":"Hardrace Rear Upper Camber Kit Spherical Nissan 350Z 370Z Infiniti G35 02+","description":"\u003ch2\u003eHardrace Rear Upper Camber Kit Pillow Ball for Infiniti G V35\/V36 (2001-2013), Nissan 350Z Z33 (2002-2009) and Nissan 370Z Z34 (2009-Present) – Adjustable Camber, More Grip\u003c\/h2\u003e\n\u003cp\u003eLowering a car pulls in negative camber that the factory arms can't correct, which wears the inner edge of the tyres and costs grip. This Hardrace rear upper camber kit is an upgrade over the factory arms. It lets you set camber exactly where you want it, so the tyres wear evenly and grip better.\u003c\/p\u003e\n\u003cp\u003eThe arms use pillow ball (spherical) joints, which give precise, direct feedback with no rubber deflection.\u003c\/p\u003e\n\u003cp\u003eIt suits the Infiniti G (2nd Gen) 2001-2007, Infiniti G (4th Gen) 2006-2013, Nissan 350Z 2002-2009 and Nissan 370Z 2009-Present.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable camber\u003c\/li\u003e\n\u003cli\u003eCorrects camber after lowering for even tyre wear\u003c\/li\u003e\n\u003cli\u003ePillow ball joints for zero deflection\u003c\/li\u003e\n\u003cli\u003eHigh-strength steel construction\u003c\/li\u003e\n\u003cli\u003eSupplied complete with bushes or joints fitted, so no press is needed\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear upper camber arms (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInfiniti \/ G (2nd Gen) 2001-2007 \/ Coupe (V35) 2002-2007 \/ G35 Coupe 3.5 2002-2004\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (2nd Gen) 2001-2007 \/ Coupe (V35) 2002-2007 \/ G35 Coupe 3.5 2004-2007\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (2nd Gen) 2001-2007 \/ Sedan (V35) 2001-2006 \/ Skyline 250GT 2.5 2001-2006\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (2nd Gen) 2001-2007 \/ Sedan (V35) 2001-2006 \/ Skyline 300GT 3.0 2001-2004\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Convertible (V36) 2009-2013 \/ G37 Convertible 3.7 2009-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Coupe (V36) 2008-2013 \/ G37 Coupe 3.7 2008-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Sedan (V36) 2006-2013 \/ G25 Sedan 2.5 2010-2012\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Sedan (V36) 2006-2013 \/ G35 Sedan 3.5 2006-2008\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Sedan (V36) 2006-2013 \/ G37 Sedan 3.7 2007-2013\u003c\/li\u003e\n\u003cli\u003eNissan \/ 350Z 2002-2009 \/ Coupe (Z33) 2002-2009 \/ 350Z 3.5 2002-2009\u003c\/li\u003e\n\u003cli\u003eNissan \/ 350Z 2002-2009 \/ Coupe (Z33) 2002-2009 \/ 350Z 3.5 (w\/ Brembo) 2002-2009\u003c\/li\u003e\n\u003cli\u003eNissan \/ 350Z 2002-2009 \/ Roadster (Z33) 2004-2009 \/ 350Z 3.5 (w\/ Brembo) 2004-2009\u003c\/li\u003e\n\u003cli\u003eNissan \/ 350Z 2002-2009 \/ Roadster (Z33) 2004-2009 \/ 350Z 3.5 2004-2009\u003c\/li\u003e\n\u003cli\u003eNissan \/ 370Z 2009-Present \/ Coupe (Z34) 2009-Present \/ 370Z 3.7 2009-Present\u003c\/li\u003e\n\u003cli\u003eNissan \/ 370Z 2009-Present \/ Roadster (Z34) 2009-Present \/ 370Z 3.7 2009-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on axle stands or a ramp. Remove the factory arm and bolt the Hardrace arm in its place; it comes complete with its bushes or joints fitted, so no press is needed. Set adjustable arms to the same length as the factory parts to start. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-rear-camber-kit-with-spherical-bearings-nissan-350z-z33\"\u003eHardrace Adjustable Rear Camber Kit With Spherical Bearings Nissan 350Z Z33 03-09\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-rear-traction-rods-with-spherical-bearings-2pc-set-nissan-350z-z33-infiniti-g35\"\u003eHardrace Adjustable Rear Traction Rods With Spherical Bearings 2Pc Set Nissan 350Z Z33 Inf\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-rear-lower-control-arm-requires-true-coilovers-2pc-set-nissan-350z-z33\"\u003eHardrace Adjustable Rear Lower Control Arm Requires True Coilovers 2Pc Set Nissan 350Z Z33\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes. Have a full four-wheel alignment done after fitting, and use it to set the adjustable arms to the settings you want.\u003c\/p\u003e\n\u003ch3\u003eDoes it come with the bushes fitted?\u003c\/h3\u003e\n\u003cp\u003eYes. The arm comes complete with its bushes or joints already fitted, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003ePillow ball joints pass on a little more noise and vibration than rubber bushes, but there is no rubber flex, so the handling is far more precise.\u003c\/p\u003e\n\u003ch3\u003eHow much camber should I run?\u003c\/h3\u003e\n\u003cp\u003eFor road use, stay close to the manufacturer's figures or slightly more negative. Track cars often run more, but this increases inner tyre wear on the road.\u003c\/p\u003e\n\u003ch3\u003eDo I need it on a standard-height car?\u003c\/h3\u003e\n\u003cp\u003eIt is most useful on lowered cars, where it brings the geometry back into spec. On a standard car it still gives firmer location and finer adjustment than the factory parts.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780067455288,"sku":"HR-8739","price":753.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20172241031110v31k1hh_cdb99fcb-6095-4269-a04d-be3dee6681bd.jpg?v=1678898854"},{"product_id":"hardrace-race-series-hardened-engine-mount-2pc-set-nissan-350z-z33-infiniti-g35","title":"Hardrace Race Hardened Engine Mount Nissan 350Z Z33 Infiniti G35 02-08","description":"\u003ch2\u003eHardrace Hardened Engine Mount for Infiniti G V35 (2001-2007) and Nissan 350Z Z33 (2002-2009) – Less Engine Movement, Sharper Response\u003c\/h2\u003e\n\u003cp\u003eSoft factory mounts let the engine and gearbox rock under acceleration, braking and gear changes, which blunts throttle response, makes shifts vague and can cause wheel hop. This Hardrace hardened engine mount is a firmer upgrade that holds the drivetrain in place, so power goes down more cleanly and the car feels tighter and more responsive.\u003c\/p\u003e\n\u003cp\u003eOn rear-drive Nissans driven hard on track or in drift, firmer mounts keep the drivetrain in place for more consistent power delivery.\u003c\/p\u003e\n\u003cp\u003eIt uses hardened rubber, a high-strength, anti-crack compound that is firmer than the factory rubber but still absorbs some vibration.\u003c\/p\u003e\n\u003cp\u003eIt suits the Infiniti G V35 (2001-2007) and Nissan 350Z Z33 (2002-2009).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer than the factory mount\u003c\/li\u003e\n\u003cli\u003eLess engine and gearbox movement\u003c\/li\u003e\n\u003cli\u003eSharper throttle response and more precise gear changes\u003c\/li\u003e\n\u003cli\u003eHelps reduce wheel hop\u003c\/li\u003e\n\u003cli\u003eHardened rubber: firm but still absorbs vibration\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHardened engine mount (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInfiniti \/ G (2nd Gen) 2001-2007 \/ Coupe (V35) 2002-2007 \/ G35 Coupe 3.5 2002-2004\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (2nd Gen) 2001-2007 \/ Coupe (V35) 2002-2007 \/ G35 Coupe 3.5 2004-2007\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (2nd Gen) 2001-2007 \/ Sedan (V35) 2001-2006 \/ Skyline 250GT 2.5 2001-2006\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (2nd Gen) 2001-2007 \/ Sedan (V35) 2001-2006 \/ Skyline 300GT 3.0 2001-2004\u003c\/li\u003e\n\u003cli\u003eNissan \/ 350Z 2002-2009 \/ Coupe (Z33) 2002-2009 \/ 350Z 3.5 2002-2009\u003c\/li\u003e\n\u003cli\u003eNissan \/ 350Z 2002-2009 \/ Coupe (Z33) 2002-2009 \/ 350Z 3.5 (w\/ Brembo) 2002-2009\u003c\/li\u003e\n\u003cli\u003eNissan \/ 350Z 2002-2009 \/ Roadster (Z33) 2004-2009 \/ 350Z 3.5 (w\/ Brembo) 2004-2009\u003c\/li\u003e\n\u003cli\u003eNissan \/ 350Z 2002-2009 \/ Roadster (Z33) 2004-2009 \/ 350Z 3.5 2004-2009\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the engine and gearbox with a jack or engine support bar before undoing any mount, and work on one mount at a time so the drivetrain stays aligned. Remove the factory mount and bolt the Hardrace mount in its place. Tighten all fixings to the vehicle manufacturer's torque figures. Expect a little more vibration than standard. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-race-series-hardened-transmission-mount-1pc-set-nissan-350z-z33-infiniti-g35\"\u003eHardrace Race Series Hardened Transmission Mount 1Pc Set Nissan 350Z Z33 Infiniti G35\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-race-series-hardened-engine-and-transmission-mounts-3pc-set-nissan-350z-z33-infiniti-g35\"\u003eHardrace Race Series Hardened Engine And Transmission Mounts 3Pc Set Nissan 350Z Z33 Infin\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-street-series-hardened-engine-and-transmission-mounts-3pc-set-nissan-350z-z33-infiniti-g35\"\u003eHardrace Street Series Hardened Engine And Transmission Mounts 3Pc Set Nissan 350Z Z33 Inf\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill it increase vibration?\u003c\/h3\u003e\n\u003cp\u003eYes, a little. Firmer mounts pass more engine vibration into the cabin, especially at idle.\u003c\/p\u003e\n\u003ch3\u003eShould I upgrade all the mounts at once?\u003c\/h3\u003e\n\u003cp\u003eUpgrading the matching mounts together gives the most consistent result, but each mount can be fitted on its own.\u003c\/p\u003e\n\u003ch3\u003eDoes it come ready to fit?\u003c\/h3\u003e\n\u003cp\u003eYes. It is a complete mount, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780067586360,"sku":"HR-6568-F","price":310.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20157711502511l50n25bo.jpg?v=1678898858"},{"product_id":"hardrace-race-series-hardened-transmission-mount-1pc-set-nissan-350z-z33-infiniti-g35","title":"Hardrace Race Hardened Transmission Mount Nissan 350Z Z33 Infiniti 02-08","description":"\u003ch2\u003eHardrace Hardened Rear Side Transmission Mount MT for Infiniti G V35 (2001-2007) and Nissan 350Z Z33 (2002-2009) – Less Engine Movement, Sharper Response\u003c\/h2\u003e\n\u003cp\u003eSoft factory mounts let the engine and gearbox rock under acceleration, braking and gear changes, which blunts throttle response, makes shifts vague and can cause wheel hop. This Hardrace hardened rear side transmission mount is a firmer upgrade that holds the drivetrain in place, so power goes down more cleanly and the car feels tighter and more responsive.\u003c\/p\u003e\n\u003cp\u003eOn rear-drive Nissans driven hard on track or in drift, firmer mounts keep the drivetrain in place for more consistent power delivery.\u003c\/p\u003e\n\u003cp\u003eIt uses hardened rubber, a high-strength, anti-crack compound that is firmer than the factory rubber but still absorbs some vibration.\u003c\/p\u003e\n\u003cp\u003eIt suits the Infiniti G V35 (2001-2007) and Nissan 350Z Z33 (2002-2009).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer than the factory mount\u003c\/li\u003e\n\u003cli\u003eLess engine and gearbox movement\u003c\/li\u003e\n\u003cli\u003eSharper throttle response and more precise gear changes\u003c\/li\u003e\n\u003cli\u003eHelps reduce wheel hop\u003c\/li\u003e\n\u003cli\u003eHardened rubber: firm but still absorbs vibration\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHardened rear side transmission mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInfiniti \/ G (2nd Gen) 2001-2007 \/ Coupe (V35) 2002-2007 \/ G35 Coupe 3.5 2002-2004\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (2nd Gen) 2001-2007 \/ Coupe (V35) 2002-2007 \/ G35 Coupe 3.5 2004-2007\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (2nd Gen) 2001-2007 \/ Sedan (V35) 2001-2006 \/ Skyline 250GT 2.5 2001-2006\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (2nd Gen) 2001-2007 \/ Sedan (V35) 2001-2006 \/ Skyline 300GT 3.0 2001-2004\u003c\/li\u003e\n\u003cli\u003eNissan \/ 350Z 2002-2009 \/ Coupe (Z33) 2002-2009 \/ 350Z 3.5 2002-2009\u003c\/li\u003e\n\u003cli\u003eNissan \/ 350Z 2002-2009 \/ Coupe (Z33) 2002-2009 \/ 350Z 3.5 (w\/ Brembo) 2002-2009\u003c\/li\u003e\n\u003cli\u003eNissan \/ 350Z 2002-2009 \/ Roadster (Z33) 2004-2009 \/ 350Z 3.5 (w\/ Brembo) 2004-2009\u003c\/li\u003e\n\u003cli\u003eNissan \/ 350Z 2002-2009 \/ Roadster (Z33) 2004-2009 \/ 350Z 3.5 2004-2009\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e For MT use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the engine and gearbox with a jack or engine support bar before undoing any mount, and work on one mount at a time so the drivetrain stays aligned. Remove the factory mount and bolt the Hardrace mount in its place. Tighten all fixings to the vehicle manufacturer's torque figures. Expect a little more vibration than standard. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-race-series-hardened-engine-mount-2pc-set-nissan-350z-z33-infiniti-g35\"\u003eHardrace Race Series Hardened Engine Mount 2Pc Set Nissan 350Z Z33 Infiniti G35\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-race-series-hardened-engine-and-transmission-mounts-3pc-set-nissan-350z-z33-infiniti-g35\"\u003eHardrace Race Series Hardened Engine And Transmission Mounts 3Pc Set Nissan 350Z Z33 Infin\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-street-series-hardened-engine-and-transmission-mounts-3pc-set-nissan-350z-z33-infiniti-g35\"\u003eHardrace Street Series Hardened Engine And Transmission Mounts 3Pc Set Nissan 350Z Z33 Inf\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill it increase vibration?\u003c\/h3\u003e\n\u003cp\u003eYes, a little. Firmer mounts pass more engine vibration into the cabin, especially at idle.\u003c\/p\u003e\n\u003ch3\u003eShould I upgrade all the mounts at once?\u003c\/h3\u003e\n\u003cp\u003eUpgrading the matching mounts together gives the most consistent result, but each mount can be fitted on its own.\u003c\/p\u003e\n\u003ch3\u003eDoes it suit manual or automatic cars?\u003c\/h3\u003e\n\u003cp\u003eHardrace lists it for manual models. Check the note in the Fitment section against your engine and gearbox before ordering.\u003c\/p\u003e\n\u003ch3\u003eDoes it come ready to fit?\u003c\/h3\u003e\n\u003cp\u003eYes. It is a complete mount, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780067619128,"sku":"HR-6568-R","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/2015112614184514v18g45rq.jpg?v=1678898858"},{"product_id":"hardrace-hardened-rubber-complete-bushing-set-29pc-set-nissan-350z-z33-infiniti-g35","title":"Hardrace Rubber Complete Bushing Set Nissan 350Z Z33 Infiniti G35 02-08","description":"\u003ch2\u003eHardrace Bushes Kit Complete Car for Infiniti G V35 (2001-2007) and Nissan 350Z Z33 (2002-2009) – Firmer Location, Sharper Handling\u003c\/h2\u003e\n\u003cp\u003eAfter years on the road the factory suspension bushes are soft and tired, which leaves the handling vague and imprecise. This Hardrace bushes kit complete car upgrades them in one go with firmer Hardrace bushes, so the car feels tight, sharp and consistent again.\u003c\/p\u003e\n\u003cp\u003eSilvia, Skyline and Z owners push these rear-drive chassis hard, and firmer bushes keep the geometry consistent when the car is loaded up on track or in drift.\u003c\/p\u003e\n\u003cp\u003eThey are made from hardened rubber, a high-strength, anti-crack compound that is firmer than the factory bushes but still absorbs vibration.\u003c\/p\u003e\n\u003cp\u003eIt suits the Infiniti G V35 (2001-2007) and Nissan 350Z Z33 (2002-2009).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer than the factory bushes\u003c\/li\u003e\n\u003cli\u003eSharper, more consistent handling\u003c\/li\u003e\n\u003cli\u003eHardened rubber: firm but still absorbs vibration\u003c\/li\u003e\n\u003cli\u003e29-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBushes kit complete car (29 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInfiniti \/ G (2nd Gen) 2001-2007 \/ Coupe (V35) 2002-2007 \/ G35 Coupe 3.5 2002-2004\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (2nd Gen) 2001-2007 \/ Coupe (V35) 2002-2007 \/ G35 Coupe 3.5 2004-2007\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (2nd Gen) 2001-2007 \/ Sedan (V35) 2001-2006 \/ Skyline 250GT 2.5 2001-2006\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (2nd Gen) 2001-2007 \/ Sedan (V35) 2001-2006 \/ Skyline 300GT 3.0 2001-2004\u003c\/li\u003e\n\u003cli\u003eNissan \/ 350Z 2002-2009 \/ Coupe (Z33) 2002-2009 \/ 350Z 3.5 2002-2009\u003c\/li\u003e\n\u003cli\u003eNissan \/ 350Z 2002-2009 \/ Coupe (Z33) 2002-2009 \/ 350Z 3.5 (w\/ Brembo) 2002-2009\u003c\/li\u003e\n\u003cli\u003eNissan \/ 350Z 2002-2009 \/ Roadster (Z33) 2004-2009 \/ 350Z 3.5 (w\/ Brembo) 2004-2009\u003c\/li\u003e\n\u003cli\u003eNissan \/ 350Z 2002-2009 \/ Roadster (Z33) 2004-2009 \/ 350Z 3.5 2004-2009\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe bushes press into the factory parts, so the part needs removing from the car and a hydraulic press is needed to press the old bushes out and the new Hardrace bushes in. Refit the part and tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-oe-style-front-hardened-stabilizer-bushes-3pc-set-nissan-350z-02-09\"\u003eHardrace OE Style Front Hardened Stabilizer Bushes 3Pc Set Nissan 350Z 02-09\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-oe-style-rear-hardened-stabilizer-bushes-3pc-set-nissan-350z-02-09\"\u003eHardrace OE Style Rear Hardened Stabilizer Bushes 3Pc Set Nissan 350Z 02-09\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-rubber-rear-trailing-arm-bushes-2pc-set-nissan-350z-z33-infiniti-g35-03-09\"\u003eHardrace Hardened Rubber Rear Trailing Arm Bushes 2Pc Set Nissan 350Z Z33 Infiniti G35 03-\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need a press?\u003c\/h3\u003e\n\u003cp\u003eYes. The old bushes must be pressed out and the new ones pressed in with a hydraulic press.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes, have a full four-wheel alignment done after fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eOnly slightly. The hardened rubber is firmer than the factory bushes but still absorbs vibration, so it stays comfortable for everyday driving.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780067717432,"sku":"HR-7572","price":886.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/2015111014482014l48m20nj.jpg?v=1678898861"},{"product_id":"hardrace-nissan-370z-z34-infiniti-g-v36-m-y50-rear-camber-kit-v2-pillow-ball-2pcs-set","title":"Hardrace Rear Camber Kit V2 Pillow Ball Nissan 370Z Z34 Infiniti G V36 05+","description":"\u003ch2\u003eHardrace Rear Camber Kit Pillow Ball for Infiniti G V36 (2006-2013) and Nissan 370Z Z34 (2009-Present) – Adjustable Camber, More Grip\u003c\/h2\u003e\n\u003cp\u003eLowering a car pulls in negative camber that the factory arms can't correct, which wears the inner edge of the tyres and costs grip. This Hardrace rear camber kit is an upgrade over the factory arms. It lets you set camber exactly where you want it, so the tyres wear evenly and grip better.\u003c\/p\u003e\n\u003cp\u003eThe arms use pillow ball (spherical) joints, which give precise, direct feedback with no rubber deflection.\u003c\/p\u003e\n\u003cp\u003eIt suits the Infiniti G (4th Gen) 2006-2013 and Nissan 370Z 2009-Present.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable camber\u003c\/li\u003e\n\u003cli\u003eCorrects camber after lowering for even tyre wear\u003c\/li\u003e\n\u003cli\u003ePillow ball joints for zero deflection\u003c\/li\u003e\n\u003cli\u003eHigh-strength steel construction\u003c\/li\u003e\n\u003cli\u003eSupplied complete with bushes or joints fitted, so no press is needed\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear camber arms (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Convertible (V36) 2009-2013 \/ G37 Convertible 3.7 2009-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Coupe (V36) 2008-2013 \/ G37 Coupe 3.7 2008-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Sedan (V36) 2006-2013 \/ G25 Sedan 2.5 2010-2012\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Sedan (V36) 2006-2013 \/ G35 Sedan 3.5 2006-2008\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Sedan (V36) 2006-2013 \/ G37 Sedan 3.7 2007-2013\u003c\/li\u003e\n\u003cli\u003eNissan \/ 370Z 2009-Present \/ Coupe (Z34) 2009-Present \/ 370Z 3.7 2009-Present\u003c\/li\u003e\n\u003cli\u003eNissan \/ 370Z 2009-Present \/ Roadster (Z34) 2009-Present \/ 370Z 3.7 2009-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on axle stands or a ramp. Remove the factory arm and bolt the Hardrace arm in its place; it comes complete with its bushes or joints fitted, so no press is needed. Set adjustable arms to the same length as the factory parts to start. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-rear-traction-rod-with-spherical-bearings-2pc-set-nissan-370z-z34\"\u003eHardrace Adjustable Rear Traction Rod With Spherical Bearings 2Pc Set Nissan 370Z Z34\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-rear-lower-control-arm-requires-true-coilovers-2pc-set-nissan-370z-z34\"\u003eHardrace Adjustable Rear Lower Control Arm Requires True Coilovers 2Pc Set Nissan 370Z Z34\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-rear-traction-rod-with-hardened-rubber-bushes-2pc-set-nissan-370z-z34\"\u003eHardrace Adjustable Rear Traction Rod With Hardened Rubber Bushes 2Pc Set Nissan 370Z Z34\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes. Have a full four-wheel alignment done after fitting, and use it to set the adjustable arms to the settings you want.\u003c\/p\u003e\n\u003ch3\u003eDoes it come with the bushes fitted?\u003c\/h3\u003e\n\u003cp\u003eYes. The arm comes complete with its bushes or joints already fitted, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003ePillow ball joints pass on a little more noise and vibration than rubber bushes, but there is no rubber flex, so the handling is far more precise.\u003c\/p\u003e\n\u003ch3\u003eHow much camber should I run?\u003c\/h3\u003e\n\u003cp\u003eFor road use, stay close to the manufacturer's figures or slightly more negative. Track cars often run more, but this increases inner tyre wear on the road.\u003c\/p\u003e\n\u003ch3\u003eDo I need it on a standard-height car?\u003c\/h3\u003e\n\u003cp\u003eIt is most useful on lowered cars, where it brings the geometry back into spec. On a standard car it still gives firmer location and finer adjustment than the factory parts.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780070207800,"sku":"HR-Q0558","price":279.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0558_main_1.jpg?v=1678898882"},{"product_id":"hardrace-nissan-370z-z34-infiniti-g-v36-m-y50-rear-camber-kit-v2-hardened-rubber-2pcs-set","title":"Hardrace Rear Camber Kit V2 Rubber Nissan 370Z Z34 Infiniti G V36 05+","description":"\u003ch2\u003eHardrace Rear Camber Kit Hardened Rubber for Infiniti G V36 (2006-2013) and Nissan 370Z Z34 (2009-Present) – Adjustable Camber, More Grip\u003c\/h2\u003e\n\u003cp\u003eLowering a car pulls in negative camber that the factory arms can't correct, which wears the inner edge of the tyres and costs grip. This Hardrace rear camber kit is an upgrade over the factory arms. It lets you set camber exactly where you want it, so the tyres wear evenly and grip better.\u003c\/p\u003e\n\u003cp\u003eThe arms use hardened rubber bushes, a high-strength, anti-crack compound that is firmer than the factory bushes but still absorbs vibration.\u003c\/p\u003e\n\u003cp\u003eIt suits the Infiniti G (4th Gen) 2006-2013 and Nissan 370Z 2009-Present.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable camber\u003c\/li\u003e\n\u003cli\u003eCorrects camber after lowering for even tyre wear\u003c\/li\u003e\n\u003cli\u003eHardened rubber bushes for firm, quiet control\u003c\/li\u003e\n\u003cli\u003eHigh-strength steel construction\u003c\/li\u003e\n\u003cli\u003eSupplied complete with bushes or joints fitted, so no press is needed\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear camber arms (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Convertible (V36) 2009-2013 \/ G37 Convertible 3.7 2009-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Coupe (V36) 2008-2013 \/ G37 Coupe 3.7 2008-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Sedan (V36) 2006-2013 \/ G25 Sedan 2.5 2010-2012\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Sedan (V36) 2006-2013 \/ G35 Sedan 3.5 2006-2008\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Sedan (V36) 2006-2013 \/ G37 Sedan 3.7 2007-2013\u003c\/li\u003e\n\u003cli\u003eNissan \/ 370Z 2009-Present \/ Coupe (Z34) 2009-Present \/ 370Z 3.7 2009-Present\u003c\/li\u003e\n\u003cli\u003eNissan \/ 370Z 2009-Present \/ Roadster (Z34) 2009-Present \/ 370Z 3.7 2009-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on axle stands or a ramp. Remove the factory arm and bolt the Hardrace arm in its place; it comes complete with its bushes or joints fitted, so no press is needed. Set adjustable arms to the same length as the factory parts to start. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-rear-traction-rod-with-spherical-bearings-2pc-set-nissan-370z-z34\"\u003eHardrace Adjustable Rear Traction Rod With Spherical Bearings 2Pc Set Nissan 370Z Z34\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-nissan-370z-z34-infiniti-g-v36-m-y50-rear-camber-kit-v2-pillow-ball-2pcs-set\"\u003eHardrace Rear Camber Kit V2 Pillow Ball 2Pcs Nissan 370Z Z34 Infiniti G V36 M Y50\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-rear-lower-control-arm-requires-true-coilovers-2pc-set-nissan-370z-z34\"\u003eHardrace Adjustable Rear Lower Control Arm Requires True Coilovers 2Pc Set Nissan 370Z Z34\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes. Have a full four-wheel alignment done after fitting, and use it to set the adjustable arms to the settings you want.\u003c\/p\u003e\n\u003ch3\u003eDoes it come with the bushes fitted?\u003c\/h3\u003e\n\u003cp\u003eYes. The arm comes complete with its bushes or joints already fitted, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eOnly slightly. The hardened rubber is firmer than the factory bushes but still absorbs vibration, so it stays comfortable for everyday driving.\u003c\/p\u003e\n\u003ch3\u003eHow much camber should I run?\u003c\/h3\u003e\n\u003cp\u003eFor road use, stay close to the manufacturer's figures or slightly more negative. Track cars often run more, but this increases inner tyre wear on the road.\u003c\/p\u003e\n\u003ch3\u003eDo I need it on a standard-height car?\u003c\/h3\u003e\n\u003cp\u003eIt is most useful on lowered cars, where it brings the geometry back into spec. On a standard car it still gives firmer location and finer adjustment than the factory parts.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780070240568,"sku":"HR-Q0636","price":239.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0636_main.jpg?v=1678898882"},{"product_id":"hardrace-nissan-370z-z34-infiniti-g-06-14-v36-q50-q60-14-v37-rc-tie-rod-end-forged-body-2pcs-set","title":"Hardrace Rc Tie Rod End Forged Body Nissan 370Z Z34 Infiniti G 06-14 V36","description":"\u003ch2\u003eHardrace Roll Centre Tie Rod End for Infiniti G, Q60 and Q50 and Nissan 370Z – Less Bump Steer, Steadier Steering\u003c\/h2\u003e\n\u003cp\u003eWhen a car is lowered, the steering arm and tie rod sit at the wrong angle, which causes bump steer: the car darts over bumps and feels nervous under braking. This Hardrace roll centre tie rod end corrects the tie rod angle, taking out bump steer for steadier, more precise steering.\u003c\/p\u003e\n\u003cp\u003eIt suits the Infiniti G, Q60 and Q50 and Nissan 370Z.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCorrects the tie rod angle\u003c\/li\u003e\n\u003cli\u003eReduces bump steer\u003c\/li\u003e\n\u003cli\u003eSteadier, more precise steering\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRoll centre tie rod end (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Convertible (V36) 2009-2013 \/ G37 Convertible 3.7 2009-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Coupe (V36) 2008-2013 \/ G37 Coupe 3.7 2008-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Sedan (V36) 2006-2013 \/ G25 Sedan 2.5 2010-2012\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Sedan (V36) 2006-2013 \/ G35 Sedan 3.5 2006-2008\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Sedan (V36) 2006-2013 \/ G37 Sedan 3.7 2007-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ Q60 (1st Gen) 2013-2015 \/ Coupe (CV36) 2013-2015 \/ Q60 Coupe 3.7 2013-2015\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ Q60 (1st Gen) 2013-2015 \/ Coupe (CV36) 2013-2015 \/ Q60S Coupe 3.7 2013-2015\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ Q50 (1st Gen) 2013-Present \/ Sedan (V37) 2013-Present \/ Q50 2.0 Turbo AWD 2014-Present\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ Q50 (1st Gen) 2013-Present \/ Sedan (V37) 2013-Present \/ Q50 2.0 Turbo RWD 2014-Present\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ Q50 (1st Gen) 2013-Present \/ Sedan (V37) 2013-Present \/ Q50 2.2 TD AWD 2013-Present\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ Q50 (1st Gen) 2013-Present \/ Sedan (V37) 2013-Present \/ Q50 2.2 TD RWD 2013-Present\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ Q50 (1st Gen) 2013-Present \/ Sedan (V37) 2013-Present \/ Q50 3.7 AWD 2013-Present\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ Q50 (1st Gen) 2013-Present \/ Sedan (V37) 2013-Present \/ Q50 3.7 RWD 2013-Present\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ Q50 (1st Gen) 2013-Present \/ Sedan (V37) 2013-Present \/ Q50H Hybrid 3.5 AWD 2013-Present\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ Q50 (1st Gen) 2013-Present \/ Sedan (V37) 2013-Present \/ Q50H Hybrid 3.5 RWD 2013-Present\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ Q50 (1st Gen) 2013-Present \/ Sedan (V37) 2013-Present \/ Q50S 3.0 Twin-Turbo AWD 2016-Present\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ Q50 (1st Gen) 2013-Present \/ Sedan (V37) 2013-Present \/ Q50S 3.0 Twin-Turbo RWD 2016-Present\u003c\/li\u003e\n\u003cli\u003eNissan \/ 370Z 2009-Present \/ Coupe (Z34) 2009-Present \/ 370Z 3.7 2009-Present\u003c\/li\u003e\n\u003cli\u003eNissan \/ 370Z 2009-Present \/ Roadster (Z34) 2009-Present \/ 370Z 3.7 2009-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e For Lowered Suspension use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely and remove the wheel. Note the position of the factory tie rod end on the track rod, then undo the lock nut, separate the tie rod end from the hub with a proper splitter and unscrew it. Fit the Hardrace part in the same position and tighten to the vehicle manufacturer's torque figures. Have the front tracking set straight away. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-tie-rod-end-2pc-set-nissan-370z-z34-09\"\u003eHardrace Tie Rod End 2Pc Set Nissan 370Z Z34 09+\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes, have the front tracking set straight after fitting.\u003c\/p\u003e\n\u003ch3\u003eDoes it fit standard-height cars?\u003c\/h3\u003e\n\u003cp\u003eIt is designed to correct the geometry on lowered cars. On a standard-height car the factory tie rod end is already at the right angle.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780070601016,"sku":"HR-Q0837","price":199.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hardrace-placeholder_a44f8570-0e4b-4b4e-b3cc-66912866f952.jpg?v=1678898891"},{"product_id":"hardrace-adjustable-25-4mm-rear-anti-roll-bar-3pc-set-nissan-370z-z34-infiniti-g37","title":"Hardrace Adj 25.4mm Rear Anti Roll Bar Nissan 370Z Z34 Infiniti G37 06-21","description":"\u003ch2\u003eHardrace 25.4mm Adjustable Rear Anti Roll Bar for Infiniti G V36 (2006-2013) and Nissan 370Z Z34 (2009-Present) – Flatter Cornering, Sharper Response\u003c\/h2\u003e\n\u003cp\u003eThe factory rear anti-roll bar is soft, so the car leans and pushes wide in corners. This Hardrace 25.4mm rear anti-roll bar is a stiffer upgrade that cuts rear body roll, which reduces understeer and helps the car rotate into corners.\u003c\/p\u003e\n\u003cp\u003eThe hollow design adds stiffness without adding much weight. It is heat treated for strength. It has 2-way adjustment, so you can fine-tune the roll stiffness to suit the road or track. It comes with mounting bushes.\u003c\/p\u003e\n\u003cp\u003eOn rear-drive Nissans like the Silvia, Skyline and Z, a stiffer anti-roll bar keeps the car flatter and more predictable when it is driven hard.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e25.4mm rear bar for reduced body roll\u003c\/li\u003e\n\u003cli\u003eReduces understeer and helps the car rotate\u003c\/li\u003e\n\u003cli\u003e2-way adjustable roll stiffness\u003c\/li\u003e\n\u003cli\u003eHollow design for stiffness without excess weight\u003c\/li\u003e\n\u003cli\u003eHeat treated for strength\u003c\/li\u003e\n\u003cli\u003eMounting bushes included\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e3-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e25.4mm rear anti-roll bar\u003c\/li\u003e\n\u003cli\u003eMounting bushes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e3 pieces in total.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Convertible (V36) 2009-2013 \/ G37 Convertible 3.7 2009-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Coupe (V36) 2008-2013 \/ G37 Coupe 3.7 2008-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Sedan (V36) 2006-2013 \/ G25 Sedan 2.5 2010-2012\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Sedan (V36) 2006-2013 \/ G35 Sedan 3.5 2006-2008\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Sedan (V36) 2006-2013 \/ G37 Sedan 3.7 2007-2013\u003c\/li\u003e\n\u003cli\u003eNissan \/ 370Z 2009-Present \/ Coupe (Z34) 2009-Present \/ 370Z 3.7 2009-Present\u003c\/li\u003e\n\u003cli\u003eNissan \/ 370Z 2009-Present \/ Roadster (Z34) 2009-Present \/ 370Z 3.7 2009-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on a ramp or axle stands. Undo the drop links and bush brackets and remove the factory bar. Fit the Hardrace bar with its bushes, refit the brackets and links, and tighten everything to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Set both ends to the same adjustment hole to start. No wheel alignment is needed for the bar alone. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-front-stabilizer-link-2pc-set-nissan-370z-z34-09\"\u003eHardrace Adjustable Front Stabilizer Link 2Pc Set Nissan 370Z Z34 09+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-32mm-front-anti-roll-bar-3pc-set-nissan-370z-z34-infiniti-g37\"\u003eHardrace Adjustable 32mm Front Anti Roll Bar 3Pc Set Nissan 370Z Z34 Infiniti G37\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment after fitting?\u003c\/h3\u003e\n\u003cp\u003eNo. An anti-roll bar does not change camber, toe or caster. You only need an alignment if you change the ride height at the same time.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eA stiffer bar is felt mainly in corners and over bumps that hit one side of the car. Over bumps that hit both wheels evenly, the ride is largely unchanged.\u003c\/p\u003e\n\u003ch3\u003eWhich setting should I start on?\u003c\/h3\u003e\n\u003cp\u003eStart on the softest setting with both ends set the same, then go firmer if you want less roll.\u003c\/p\u003e\n\u003ch3\u003eCan I use my standard drop links?\u003c\/h3\u003e\n\u003cp\u003eYes. On a lowered car, adjustable drop links let you set the bar level at rest, so it is not pre-loaded.\u003c\/p\u003e\n\u003ch3\u003eShould I upgrade the front bar too?\u003c\/h3\u003e\n\u003cp\u003eUpgrading both ends cuts roll at both axles while keeping the balance closer to standard. Upgrading one end only shifts the balance: a stiffer front adds understeer, a stiffer rear adds oversteer.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780070666552,"sku":"HR-7877","price":248.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/2015111017221417u22j14zp.jpg?v=1678898892"},{"product_id":"hardrace-adjustable-32mm-front-anti-roll-bar-3pc-set-nissan-370z-z34-infiniti-g37","title":"Hardrace Adj 32mm Front Anti Roll Bar Nissan 370Z Z34 Infiniti G37 06+","description":"\u003ch2\u003eHardrace 32mm Front Anti Roll Bar for Infiniti G, M, Q70 and Q50 and Nissan 370Z – Flatter Cornering, Sharper Response\u003c\/h2\u003e\n\u003cp\u003eThe factory front anti-roll bar is built for comfort, so the car leans in corners and the steering feels slow to respond. This Hardrace 32mm front anti-roll bar is a stiffer upgrade that cuts body roll, so the car sits flatter, turns in more crisply and feels more composed through quick changes of direction.\u003c\/p\u003e\n\u003cp\u003eThe hollow design adds stiffness without adding much weight. It is heat treated for strength. It has 2-way adjustment, so you can fine-tune the roll stiffness to suit the road or track. It comes with mounting bushes.\u003c\/p\u003e\n\u003cp\u003eOn rear-drive Nissans like the Silvia, Skyline and Z, a stiffer anti-roll bar keeps the car flatter and more predictable when it is driven hard.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e32mm front bar for reduced body roll\u003c\/li\u003e\n\u003cli\u003eSharper turn-in and flatter cornering\u003c\/li\u003e\n\u003cli\u003e2-way adjustable roll stiffness\u003c\/li\u003e\n\u003cli\u003eHollow design for stiffness without excess weight\u003c\/li\u003e\n\u003cli\u003eHeat treated for strength\u003c\/li\u003e\n\u003cli\u003eMounting bushes included\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e3-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e32mm front anti-roll bar\u003c\/li\u003e\n\u003cli\u003eMounting bushes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e3 pieces in total.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Convertible (V36) 2009-2013 \/ G37 Convertible 3.7 2009-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Coupe (V36) 2008-2013 \/ G37 Coupe 3.7 2008-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Sedan (V36) 2006-2013 \/ G25 Sedan 2.5 2010-2012\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Sedan (V36) 2006-2013 \/ G35 Sedan 3.5 2006-2008\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Sedan (V36) 2006-2013 \/ G37 Sedan 3.7 2007-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ M (4th Gen) 2010-2013 \/ Sedan (Y51) 2010-2013 \/ M30D 3.0 TD 2010-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ M (4th Gen) 2010-2013 \/ Sedan (Y51) 2010-2013 \/ M35H Hybrid 3.5 2010-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ M (4th Gen) 2010-2013 \/ Sedan (Y51) 2010-2013 \/ M37 3.7 2010-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ Q70 (1st Gen) 2014-Present \/ Sedan (Y51) 2014-Present \/ Q70 2.2 TD 2014-Present\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ Q70 (1st Gen) 2014-Present \/ Sedan (Y51) 2014-Present \/ Q70 3.0 TD 2014-Present\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ Q70 (1st Gen) 2014-Present \/ Sedan (Y51) 2014-Present \/ Q70 3.7 2014-Present\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ Q50 (1st Gen) 2013-Present \/ Sedan (V37) 2013-Present \/ Q50 3.7 RWD 2013-Present\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ Q50 (1st Gen) 2013-Present \/ Sedan (V37) 2013-Present \/ Q50H Hybrid 3.5 RWD 2013-Present\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ Q50 (1st Gen) 2013-Present \/ Sedan (V37) 2013-Present \/ Q50S 3.0 Twin-Turbo RWD 2016-Present\u003c\/li\u003e\n\u003cli\u003eNissan \/ 370Z 2009-Present \/ Coupe (Z34) 2009-Present \/ 370Z 3.7 2009-Present\u003c\/li\u003e\n\u003cli\u003eNissan \/ 370Z 2009-Present \/ Roadster (Z34) 2009-Present \/ 370Z 3.7 2009-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Q50\/Skyline V37: For RWD 6cyl Engine Models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on a ramp or axle stands. Undo the drop links and bush brackets and remove the factory bar. Fit the Hardrace bar with its bushes, refit the brackets and links, and tighten everything to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Set both ends to the same adjustment hole to start. No wheel alignment is needed for the bar alone. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-front-stabilizer-link-2pc-set-nissan-370z-z34-09\"\u003eHardrace Adjustable Front Stabilizer Link 2Pc Set Nissan 370Z Z34 09+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-25-4mm-rear-anti-roll-bar-3pc-set-nissan-370z-z34-infiniti-g37\"\u003eHardrace Adjustable 25.4mm Rear Anti Roll Bar 3Pc Set Nissan 370Z Z34 Infiniti G37\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment after fitting?\u003c\/h3\u003e\n\u003cp\u003eNo. An anti-roll bar does not change camber, toe or caster. You only need an alignment if you change the ride height at the same time.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eA stiffer bar is felt mainly in corners and over bumps that hit one side of the car. Over bumps that hit both wheels evenly, the ride is largely unchanged.\u003c\/p\u003e\n\u003ch3\u003eWhich setting should I start on?\u003c\/h3\u003e\n\u003cp\u003eStart on the softest setting with both ends set the same, then go firmer if you want less roll.\u003c\/p\u003e\n\u003ch3\u003eCan I use my standard drop links?\u003c\/h3\u003e\n\u003cp\u003eYes. On a lowered car, adjustable drop links let you set the bar level at rest, so it is not pre-loaded.\u003c\/p\u003e\n\u003ch3\u003eShould I upgrade the rear bar too?\u003c\/h3\u003e\n\u003cp\u003eUpgrading both ends cuts roll at both axles while keeping the balance closer to standard. Upgrading one end only shifts the balance: a stiffer front adds understeer, a stiffer rear adds oversteer.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780070699320,"sku":"HR-7876","price":248.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201512291055410r55y4un.jpg?v=1678898893"},{"product_id":"hardrace-adjustable-universal-drop-links-10mm-rod-ends-100-109mm","title":"Hardrace Adjustable Universal Drop Links 10mm Rod Ends 100-109mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 100-120mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 100-120mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 100-120mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop link\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Convertible (V36) 2009-2013 \/ G37 Convertible 3.7 2009-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Coupe (V36) 2008-2013 \/ G37 Coupe 3.7 2008-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Sedan (V36) 2006-2013 \/ G25 Sedan 2.5 2010-2012\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Sedan (V36) 2006-2013 \/ G35 Sedan 3.5 2006-2008\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Sedan (V36) 2006-2013 \/ G37 Sedan 3.7 2007-2013\u003c\/li\u003e\n\u003cli\u003eNissan \/ 350Z 2002-2009 \/ Coupe (Z33) 2002-2009 \/ 350Z 3.5 2002-2009\u003c\/li\u003e\n\u003cli\u003ePorsche \/ 911 (5th Gen) 1997-2005 \/ 911 (996) 1997-2005 \/ 911 Carrera 3.4 1997-2002\u003c\/li\u003e\n\u003cli\u003ePorsche \/ 911 (5th Gen) 1997-2005 \/ 911 (996) 1997-2005 \/ 911 Carrera 4 3.4 1997-2002\u003c\/li\u003e\n\u003cli\u003eFord \/ Focus (4th Gen) 2018-Present \/ Hatchback (C519) 2018-Present \/ Focus 1.0 Turbo 2018-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Focus (4th Gen) 2018-Present \/ Hatchback (C519) 2018-Present \/ Focus 1.0 Turbo Hybrid 2018-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Focus (4th Gen) 2018-Present \/ Hatchback (C519) 2018-Present \/ Focus 1.5 TD 2018-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Focus (4th Gen) 2018-Present \/ Hatchback (C519) 2018-Present \/ Focus 1.5 Turbo 2018-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Focus (4th Gen) 2018-Present \/ Hatchback (C519) 2018-Present \/ Focus 2.0 TD 2018-Present\u003c\/li\u003e\n\u003cli\u003eNissan \/ 350Z 2002-2009 \/ Coupe (Z33) 2002-2009 \/ 350Z 3.5 (w\/ Brembo) 2002-2009\u003c\/li\u003e\n\u003cli\u003eNissan \/ 350Z 2002-2009 \/ Roadster (Z33) 2004-2009 \/ 350Z 3.5 (w\/ Brembo) 2004-2009\u003c\/li\u003e\n\u003cli\u003eNissan \/ 350Z 2002-2009 \/ Roadster (Z33) 2004-2009 \/ 350Z 3.5 2004-2009\u003c\/li\u003e\n\u003cli\u003eNissan \/ 370Z 2009-Present \/ Coupe (Z34) 2009-Present \/ 370Z 3.7 2009-Present\u003c\/li\u003e\n\u003cli\u003eNissan \/ 370Z 2009-Present \/ Roadster (Z34) 2009-Present \/ 370Z 3.7 2009-Present\u003c\/li\u003e\n\u003cli\u003eHonda \/ Accord 4-Door Sedan \/ 2003-2005 \/ 2.0i\u003c\/li\u003e\n\u003cli\u003eHonda \/ Accord 4-Door Sedan \/ 2003-2005 \/ 2.4i\u003c\/li\u003e\n\u003cli\u003eHonda \/ Accord 4-Door Sedan \/ 2005-2008 \/ 2.0i\u003c\/li\u003e\n\u003cli\u003eHonda \/ Accord 4-Door Sedan \/ 2005-2008 \/ 2.4i\u003c\/li\u003e\n\u003cli\u003eHonda \/ CR-V \/ 2017-2023 \/ 2.0 2WD\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Focus MK4 : Not For Wagon use; Porsche 996: For C2\/C4\/Turbo Rear Side use; CR-V '17-: For AWD Rear Side use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780138529080,"sku":"HR-6853-100","price":106.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201512992409u2d40ms.jpg?v=1678899660"},{"product_id":"hardrace-adjustable-universal-drop-links-10mm-rod-ends-125-164mm","title":"Hardrace Adjustable Universal Drop Links 10mm Rod Ends 125-164mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 125-164mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 125-164mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 125-164mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW \/ 1-Series (2nd Gen) \/ Hatchback 3DR (F21) \/ 2011-2019\u003c\/li\u003e\n\u003cli\u003eBMW \/ 1-Series (2nd Gen) \/ Hatchback 5DR (F20) \/ 2011-2019\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (6th Gen) \/ Gran Turismo (F34) \/ 2011-2019\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (6th Gen) \/ Sedan (F30) \/ 2011-2019\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (6th Gen) \/ Touring (F31) \/ 2011-2019\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (7th Gen) \/ Sedan (G20) \/ 2019-Present\u003c\/li\u003e\n\u003cli\u003eBMW \/ 4-Series (2nd Gen) \/ Convertible (G23) \/ 2020-Present\u003c\/li\u003e\n\u003cli\u003eBMW \/ 4-Series (2nd Gen) \/ Coupe (G22) \/ 2020-Present\u003c\/li\u003e\n\u003cli\u003eBMW \/ 4-Series (2nd Gen) \/ Gran Coupe (G26) \/ 2020-Present\u003c\/li\u003e\n\u003cli\u003eBMW \/ Z4 (3rd Gen) \/ Roadster (G29) \/ 2019-Present\u003c\/li\u003e\n\u003cli\u003eHonda \/ Accord 4-Door Sedan \/ 2008-2011\u003c\/li\u003e\n\u003cli\u003eMazda \/ 3 (3rd Gen) \/ Hatchback (BM\/BN) \/ 2013-2018\u003c\/li\u003e\n\u003cli\u003eMazda \/ 3 (3rd Gen) \/ Sedan (BM\/BN) \/ 2013-2018\u003c\/li\u003e\n\u003cli\u003eMazda \/ 6 (3rd Gen) \/ Sedan (GJ\/GL) \/ 2012-Present\u003c\/li\u003e\n\u003cli\u003eMazda \/ 6 (3rd Gen) \/ Wagon (GJ\/GL) \/ 2012-Present\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-5 (1st Gen) \/ SUV (KE) \/ 2012-2017\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-5 (2nd Gen) \/ SUV (KF) \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-9 (2nd Gen) \/ SUV (TC) \/ 2016-Present\u003c\/li\u003e\n\u003cli\u003eTesla \/ Model 3 \/ Sedan (5YJ3) \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eTesla \/ Model Y \/ SUV \/ 2020-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Supra (5th Gen) \/ Coupe (A90) \/ 2019-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780138561848,"sku":"HR-8659-140","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/2017541032810b3a28yc.jpg?v=1678899661"},{"product_id":"hardrace-adjustable-universal-drop-links-10mm-rod-ends-160-199mm","title":"Hardrace Adjustable Universal Drop Links 10mm Rod Ends 160-199mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 160-199mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 160-199mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 160-199mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop link\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAlfa Romeo \/ 147 \/ Hatchback (937) \/ 2000-2010\u003c\/li\u003e\n\u003cli\u003eAlfa Romeo \/ 156 \/ Sedan (932) \/ 1997-2007\u003c\/li\u003e\n\u003cli\u003eAlfa Romeo \/ 156 \/ Wagon (932) \/ 1997-2007\u003c\/li\u003e\n\u003cli\u003eAlfa Romeo \/ GT \/ Coupe (937) \/ 2003-2010\u003c\/li\u003e\n\u003cli\u003eMazda \/ 323 (8th Gen) \/ Hatchback (BJ) \/ 1998-2003\u003c\/li\u003e\n\u003cli\u003eMazda \/ 323 (8th Gen) \/ Sedan (BJ) \/ 1998-2003\u003c\/li\u003e\n\u003cli\u003eMazda \/ Premacy (1st Gen) \/ MPV (CP) (5 Seat) \/ 1999-2005\u003c\/li\u003e\n\u003cli\u003eMazda \/ Premacy (1st Gen) \/ MPV (CP) (7 Seat) \/ 1999-2005\u003c\/li\u003e\n\u003cli\u003eToyota \/ MR2 (2nd Gen) \/ Coupe (W20) \/ 1989-1999\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780138594616,"sku":"HR-8659-180","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20167794239d42x3vs.jpg?v=1678899661"},{"product_id":"hardrace-adjustable-universal-drop-links-10mm-rod-ends-200-239mm","title":"Hardrace Adjustable Universal Drop Links 10mm Rod Ends 200-239mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 200-239mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 200-239mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 200-239mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop link\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHonda \/ Civic 3-Door Hatchback \/ 2007-2011\u003c\/li\u003e\n\u003cli\u003eHonda \/ Civic 5-Door Hatchback \/ 2005-2012\u003c\/li\u003e\n\u003cli\u003eKia \/ Picanto (1st Gen) \/ Hatchback (BA\/SA) \/ 2004-2011\u003c\/li\u003e\n\u003cli\u003eLexus \/ ES (4th Gen) \/ Sedan (XV30) \/ 2001-2006\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (2nd Gen) \/ SUV (XU30) \/ 2003-2009\u003c\/li\u003e\n\u003cli\u003eMINI \/ Mini (1st Gen) \/ Convertible (R52) \/ 2001-2008\u003c\/li\u003e\n\u003cli\u003eMINI \/ Mini (1st Gen) \/ Hatchback (R50) \/ 2001-2008\u003c\/li\u003e\n\u003cli\u003eMINI \/ Mini (1st Gen) \/ Hatchback (R53) \/ 2001-2008\u003c\/li\u003e\n\u003cli\u003eToyota \/ Camry  (7th Gen) \/ Sedan (XV40) \/ 2007-2012\u003c\/li\u003e\n\u003cli\u003eToyota \/ Camry (6th Gen) \/ Sedan (XV30) \/ 2001-2006\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780138627384,"sku":"HR-8659-220","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20168413391313k39g13cv.jpg?v=1678899662"},{"product_id":"hardrace-adjustable-universal-drop-links-10mm-rod-ends-240-279mm","title":"Hardrace Adjustable Universal Drop Links 10mm Rod Ends 240-279mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 240-279mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 240-279mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 240-279mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi \/ A1 (1st Gen) \/ 2010-2018\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (4th Gen) \/ 1998-2007\u003c\/li\u003e\n\u003cli\u003eBMW \/ Z4 (1st Gen) \/ 2003-2009\u003c\/li\u003e\n\u003cli\u003eFord \/ Fiesta (6th Gen) (UKDM MK7) \/ 2008-2017\u003c\/li\u003e\n\u003cli\u003eMazda \/ 2 (3rd Gen) \/ 2007-2014\u003c\/li\u003e\n\u003cli\u003eMazda \/ 3 (4th Gen) \/ 2019-Present\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-3 \/ 2015-Present\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-30 \/ 2019-Present\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Eclipse Cross \/ 2018-Present\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (8th Gen) \/ 2007-2017\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Outlander (2nd Gen) \/ 2007-2012\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Outlander (3rd Gen) \/ 2012-Present\u003c\/li\u003e\n\u003cli\u003eNissan \/ Cube (3rd Gen) \/ 2008-2011\u003c\/li\u003e\n\u003cli\u003eNissan \/ Micra (3rd Gen) \/ 2003-2010\u003c\/li\u003e\n\u003cli\u003eNissan \/ Micra (4th Gen) \/ 2010-2017\u003c\/li\u003e\n\u003cli\u003eSkoda \/ Fabia (2nd Gen) \/ 2007-2014\u003c\/li\u003e\n\u003cli\u003eSkoda \/ Fabia (3rd Gen) \/ 2014-2022\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ SX4 (MK1) \/ 2006-2013\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ SX4 S-Cross \/ 2013-2021\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Swift (MK5) \/ 2010-2017\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Vitara (MK4) \/ 2015-Present\u003c\/li\u003e\n\u003cli\u003eVolkswagen \/ Polo (5th Gen) \/ 2009-2017\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780138922296,"sku":"HR-8659-260","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201662413132313r13w23gq.jpg?v=1678899664"},{"product_id":"hardrace-adjustable-universal-drop-links-10mm-rod-ends-280-319mm","title":"Hardrace Adjustable Universal Drop Links 10mm Rod Ends 280-319mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 280-319mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 280-319mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 280-319mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW \/ 1-Series (1st Gen) \/ 2003-2013\u003c\/li\u003e\n\u003cli\u003eBMW \/ 1-Series (2nd Gen) \/ 2011-2019\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (5th Gen) \/ 2004-2013\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (6th Gen) \/ 2011-2019\u003c\/li\u003e\n\u003cli\u003eBMW \/ 4-Series (2nd Gen) \/ 2020-Present\u003c\/li\u003e\n\u003cli\u003eBMW \/ Z4 (2nd Gen) \/ 2009-2016\u003c\/li\u003e\n\u003cli\u003eFord \/ Kuga (2nd Gen) \/ 2012-2019\u003c\/li\u003e\n\u003cli\u003eFord \/ Mondeo (4th Gen) \/ 2007-2014\u003c\/li\u003e\n\u003cli\u003eHonda \/ Civic 5-Door Hatchback \/ 2022-Present\u003c\/li\u003e\n\u003cli\u003eHonda \/ Jazz (1st Gen) \/ 2002-2008\u003c\/li\u003e\n\u003cli\u003eHonda \/ Jazz (2nd Gen) \/ 2008-2015\u003c\/li\u003e\n\u003cli\u003eHonda \/ Jazz (3rd Gen) \/ 2015-2020\u003c\/li\u003e\n\u003cli\u003eHonda \/ Jazz (4th Gen) \/ 2020-Present\u003c\/li\u003e\n\u003cli\u003eMG \/ ZS \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eMINI \/ Mini (2nd Gen) \/ 2006-2016\u003c\/li\u003e\n\u003cli\u003eMazda \/ 3 (3rd Gen) \/ 2013-2018\u003c\/li\u003e\n\u003cli\u003eMazda \/ 5 (2nd Gen) \/ 2005-2010\u003c\/li\u003e\n\u003cli\u003eMazda \/ 6 (3rd Gen) \/ 2012-Present\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-5 (1st Gen) \/ 2012-2017\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-5 (2nd Gen) \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-9 (2nd Gen) \/ 2016-Present\u003c\/li\u003e\n\u003cli\u003eMini \/ Countryman (3rd Gen) \/ 2023-Present\u003c\/li\u003e\n\u003cli\u003eMini \/ Mini (3rd Gen) \/ 2014-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ S60 (2nd Gen) \/ 2010-2018\u003c\/li\u003e\n\u003cli\u003eVolvo \/ S80 (2nd Gen) \/ 2006-2016\u003c\/li\u003e\n\u003cli\u003eVolvo \/ V60 (1st Gen) \/ 2010-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ V70 (3rd Gen) \/ 2007-2016\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC70 (2nd Gen) \/ 2007-2016\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Porsche 996\/997: For C4\/Turbo Front Side use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780138955064,"sku":"HR-8659-300","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20166241331113w31d1wn.jpg?v=1678899665"},{"product_id":"hardrace-adjustable-universal-drop-links-12mm-rod-ends-104-130mm","title":"Hardrace Adjustable Universal Drop Links 12mm Rod Ends 104-130mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 104-130mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 104-130mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 104-130mm\u003c\/li\u003e\n\u003cli\u003e12mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInfiniti \/ FX (2nd Gen) 2008-2013 \/ SUV (S51) 2008-2013 \/ FX30D 3.0 TD 2010-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ FX (2nd Gen) 2008-2013 \/ SUV (S51) 2008-2013 \/ FX37 3.7 2008-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ FX (2nd Gen) 2008-2013 \/ SUV (S51) 2008-2013 \/ FX50 5.0 2008-2013\u003c\/li\u003e\n\u003cli\u003eLexus \/ LS (1st Gen) 1989-1994 \/ Sedan (XF10) 1989-1994 \/ LS400 4.0 (UCF10) 1989-1992\u003c\/li\u003e\n\u003cli\u003eLexus \/ LS (1st Gen) 1989-1994 \/ Sedan (XF10) 1989-1994 \/ LS400 4.0 (UCF11) 1992-1994\u003c\/li\u003e\n\u003cli\u003eLexus \/ LS (2nd Gen) 1994-2000 \/ Sedan (XF20) 1994-2000 \/ LS400 4.0 (UCF20\/UCF21) 1994-2000\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (3rd Gen) 2008-2015 \/ SUV (AL10) 2008-2015 \/ RX270 2.7 (AGL10) 2008-2015\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (3rd Gen) 2008-2015 \/ SUV (AL10) 2008-2015 \/ RX350 3.5 (AWD) (GGL15) 2008-2012\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (3rd Gen) 2008-2015 \/ SUV (AL10) 2008-2015 \/ RX350 3.5 (GRL10) 2008-2012\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (3rd Gen) 2008-2015 \/ SUV (AL10) 2008-2015 \/ RX350 3.5 (GYL10) 2008-2015\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (3rd Gen) 2008-2015 \/ SUV (AL10) 2008-2015 \/ RX450h Hybrid 3.5 (AWD) (GYL15) 2008-2015\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (3rd Gen) 2008-2015 \/ SUV (AL10) 2008-2015 \/ RX450h Hybrid 3.5 (GYL10) 2008-2015\u003c\/li\u003e\n\u003cli\u003eFord \/ Kuga (3rd Gen) 2019-Present \/ SUV (CX482) 2019-Present \/ Kuga 1.5 Turbo 2019-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Kuga (3rd Gen) 2019-Present \/ SUV (CX482) 2019-Present \/ Kuga 2.0 Turbo 2019-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Kuga (3rd Gen) 2019-Present \/ SUV (CX482) 2019-Present \/ Kuga 2.0TD 2019-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Kuga (3rd Gen) 2019-Present \/ SUV (CX482) 2019-Present \/ Kuga 2.5 Hybrid 2019-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Kuga (3rd Gen) 2019-Present \/ SUV (CX482) 2019-Present \/ Kuga 2.5 PHEV 2019-Present\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (4th Gen) 2015-2023 \/ SUV (AL20) 2015-2023 \/ RX200t 2.0 Turbo (AGL20) 2015-2023\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (4th Gen) 2015-2023 \/ SUV (AL20) 2015-2023 \/ RX200t 2.0 Turbo (AWD) (AGL25) 2015-2023\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (4th Gen) 2015-2023 \/ SUV (AL20) 2015-2023 \/ RX350 3.5 (AWD) (GGL25) 2015-2023\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (4th Gen) 2015-2023 \/ SUV (AL20) 2015-2023 \/ RX450h Hybrid 3.5 (AWD) (GYL25) 2015-2023\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (4th Gen) 2015-2023 \/ SUV (AL20) 2015-2023 \/ RX450h Hybrid 3.5 (GYL20) 2015-2023\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139020600,"sku":"HR-8793-110","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201721616354516k35m45yu.jpg?v=1678899666"},{"product_id":"hardrace-adjustable-universal-drop-links-12mm-rod-ends-123-162mm","title":"Hardrace Adjustable Universal Drop Links 12mm Rod Ends 123-162mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 123-162mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 123-162mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 123-162mm\u003c\/li\u003e\n\u003cli\u003e12mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFord \/ Mustang (6th Gen) \/ Convertible (S550) \/ 2014-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Mustang (6th Gen) \/ Coupe (S550) \/ 2014-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ S60 (1st Gen) \/ Sedan (P24) \/ 2000-2009\u003c\/li\u003e\n\u003cli\u003eVolvo \/ S80 (1st Gen) \/ Sedan (TS) \/ 1998-2006\u003c\/li\u003e\n\u003cli\u003eVolvo \/ V70 (2nd Gen) \/ Wagon (Cross Country) \/ 2000-2007\u003c\/li\u003e\n\u003cli\u003eVolvo \/ V70 (2nd Gen) \/ Wagon (SW) \/ 2000-2007\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC70 (1st Gen) \/ Wagon \/ 2000-2007\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC90 (1st Gen) \/ SUV \/ 2002-2014\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Ace use (Rear).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139184440,"sku":"HR-8793-140","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/2017291348913z48b9jg.jpg?v=1678899668"},{"product_id":"hardrace-adjustable-universal-drop-links-12mm-rod-ends-163-202mm","title":"Hardrace Adjustable Universal Drop Links 12mm Rod Ends 163-202mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 163-202mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 163-202mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 163-202mm\u003c\/li\u003e\n\u003cli\u003e12mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW \/ 5-Series (6th Gen) \/ Gran Turismo (F07) \/ 2008-2017\u003c\/li\u003e\n\u003cli\u003eVolvo \/ S60 (3rd Gen) \/ Sedan \/ 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ S90 (2nd Gen) \/ Sedan \/ 2016-2025\u003c\/li\u003e\n\u003cli\u003eVolvo \/ V60 (2nd Gen) \/ Wagon \/ 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ V90 (2nd Gen) \/ Wagon \/ 2016-2025\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC60 (2nd Gen) \/ SUV \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC90 (2nd Gen) \/ SUV \/ 2014-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e BMW G30: For AWD use (Front).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-universal-adjustable-stabiliser-link-2pcs-range-90-110mm-12mm-stud-rod-end\"\u003eHardrace Universal Adjustable Stabiliser Link 2pcs Range 90-110mm 12mm Stud Rod End\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139217208,"sku":"HR-8793-180","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20172913484113l48d41tj.jpg?v=1678899668"},{"product_id":"hardrace-adjustable-universal-drop-links-12mm-rod-ends-203-242mm","title":"Hardrace Adjustable Universal Drop Links 12mm Rod Ends 203-242mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 203-242mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 203-242mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 203-242mm\u003c\/li\u003e\n\u003cli\u003e12mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW \/ 5-Series (7th Gen) \/ Sedan (G30) \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eBMW \/ 5-Series (7th Gen) \/ Touring (G31) \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eCadillac \/ ATS \/ Sedan \/ 2012-Present\u003c\/li\u003e\n\u003cli\u003eCadillac \/ CTS (3rd Gen) \/ Sedan \/ 2013-Present\u003c\/li\u003e\n\u003cli\u003eChevrolet \/ Camaro (6th Gen) \/ Coupe \/ 2015-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Mustang (6th Gen) \/ Convertible (S550) \/ 2014-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Mustang (6th Gen) \/ Coupe (S550) \/ 2014-Present\u003c\/li\u003e\n\u003cli\u003eSaab \/ 95 \/ 1999-2008\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e BMW G30: For RWD use (Front).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139249976,"sku":"HR-8793-220","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20172913491013n49k10fa.jpg?v=1678899669"},{"product_id":"hardrace-adjustable-universal-drop-links-12mm-rod-ends-243-282mm","title":"Hardrace Adjustable Universal Drop Links 12mm Rod Ends 243-282mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 243-282mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 243-282mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 243-282mm\u003c\/li\u003e\n\u003cli\u003e12mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLexus \/ ES (4th Gen) \/ Sedan (XV30) \/ 2001-2006\u003c\/li\u003e\n\u003cli\u003eLexus \/ GS (1st Gen) \/ Sedan (S140) \/ 1991-1997\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (2nd Gen) \/ SUV (XU30) \/ 2003-2009\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (3rd Gen) \/ SUV (AL10) \/ 2008-2015\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (4th Gen) \/ SUV (AL20) \/ 2015-2023\u003c\/li\u003e\n\u003cli\u003eMG \/ HS \/ SUV \/ 2019-Present\u003c\/li\u003e\n\u003cli\u003eNissan \/ Juke \/ SUV (F15) \/ 2010-Present\u003c\/li\u003e\n\u003cli\u003eTesla \/ Model 3 \/ Sedan (5YJ3) \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eTesla \/ Model Y \/ SUV \/ 2020-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Camry  (7th Gen) \/ Sedan (XV40) \/ 2007-2012\u003c\/li\u003e\n\u003cli\u003eToyota \/ Camry (6th Gen) \/ Sedan (XV30) \/ 2001-2006\u003c\/li\u003e\n\u003cli\u003eToyota \/ Camry (9th Gen) \/ Sedan (XV70) \/ 2017-2024\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (10th Gen) \/ Sedan (E150) \/ 2007-2013\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (11th Gen) \/ Sedan (E170) \/ 2013-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) \/ Hatchback (E120) \/ 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) \/ Sedan (E120) \/ 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) \/ Wagon (E120) \/ 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Previa (2nd Gen) \/ MPV (XR30) \/ 2000-2006\u003c\/li\u003e\n\u003cli\u003eToyota \/ RAV4 (6th Gen) \/ SUV (XA60) \/ 2025-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-reinforced-front-drop-links-2pc-set-toyota-camry-xv30\"\u003eHardrace Reinforced Front Drop Links 2Pc Set Toyota Camry XV30 01-06\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-reinforced-rear-drop-links-2pc-set-toyota-camry-xv30\"\u003eHardrace Reinforced Rear Drop Links 2Pc Set Toyota Camry XV30 01-06\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-reinforced-20mm-shortened-front-stabilizer-links-2pc-set-toyota-camry-xv40-06-11\"\u003eHardrace Reinforced 20mm Shortened Front Stabilizer Links 2Pc Set Toyota Camry XV40 06-11\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139282744,"sku":"HR-8793-260","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20172913493213w49o32is.jpg?v=1678899669"},{"product_id":"hardrace-adjustable-universal-drop-links-12mm-rod-ends-283-322mm","title":"Hardrace Adjustable Universal Drop Links 12mm Rod Ends 283-322mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 283-322mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 283-322mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 283-322mm\u003c\/li\u003e\n\u003cli\u003e12mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi: A3 (2nd Gen) 2003-2013, A3 (3rd Gen) 2012-2020, Q3 2011-Present, TT (2nd Gen) 2006-2014\u003c\/li\u003e\n\u003cli\u003eBMW: 5-Series (6th Gen) 2008-2017, 7-Series (5th Gen) 2008-2015\u003c\/li\u003e\n\u003cli\u003eFord: Focus (4th Gen) 2018-Present, Kuga (3rd Gen) 2019-Present, Mondeo (5th Gen) 2014-Present\u003c\/li\u003e\n\u003cli\u003eHyundai: Elantra (4th Gen) 2006-2011, Elantra (5th Gen) 2011-2015, Veloster (2nd Gen) 2017-Present, i30 (3rd Gen) 2017-Present\u003c\/li\u003e\n\u003cli\u003eMercedes-Benz: C-Class (3rd Gen) 2007-2015, E-Class (4th Gen) 2009-2017\u003c\/li\u003e\n\u003cli\u003eNissan: Juke 2010-Present, Murano (1st Gen) 2002-2008\u003c\/li\u003e\n\u003cli\u003eSaab: 95 2008-2010\u003c\/li\u003e\n\u003cli\u003eSeat: Altea 2004-2015, Leon (2nd Gen) 2005-2012, Toledo (3rd Gen) 2004-2009\u003c\/li\u003e\n\u003cli\u003eSkoda: Karoq 2017-Present, Kodiaq (1st Gen) 2016-2023, Kodiaq (2nd Gen) 2023-Present, Octavia (3rd Gen) 2012-Present, Octavia (4th Gen) 2019-Present, Superb (3rd Gen) 2015-2023, Superb (4th Gen) 2023-Present\u003c\/li\u003e\n\u003cli\u003eSubaru: Forester (5th Gen) 2018-2023, XV (2nd Gen) 2018-2022\u003c\/li\u003e\n\u003cli\u003eTesla: Model 3 2017-Present, Model Y 2020-Present\u003c\/li\u003e\n\u003cli\u003eToyota: Auris (1st Gen) 2006-2012, Auris (2nd Gen) 2012-Present, Corolla (10th Gen) 2007-2013, Corolla (11th Gen) 2013-Present, Corolla (9th Gen) 2002-2007, Prius (2nd Gen) 2003-2009\u003c\/li\u003e\n\u003cli\u003eVolkswagen: Caddy (4th Gen) 2020-Present, Golf (5th Gen) 2003-2009, Golf (6th Gen) 2008-2016, Golf (7th Gen) 2012-2020, Jetta (5th Gen) 2005-2010, Jetta (6th Gen) 2010-2018, Passat (6th Gen) 2005-2010, Passat (7th Gen) 2010-2014, Passat (8th Gen) 2014-2023, Passat (9th Gen) 2023-Present, Scirocco (3rd Gen) 2008-2017, Sharan (2nd Gen) 2010-Present, Tiguan (1st Gen) 2007-2016, Tiguan (2nd Gen) 2016-2025, Tiguan (3rd Gen) 2023-Present, Touran (2nd Gen) 2015-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e FOR LOWERED PQ35\/PQ46\/MQB Models (Front).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139413816,"sku":"HR-8793-300","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20172913494813r49d48py.jpg?v=1678899671"},{"product_id":"hardrace-adjustable-universal-drop-links-12mm-rod-ends-323-362mm","title":"Hardrace Adjustable Universal Drop Links 12mm Rod Ends 323-362mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 323-362mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 323-362mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 323-362mm\u003c\/li\u003e\n\u003cli\u003e12mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi: A3 (2nd Gen) 2003-2013, A3 (3rd Gen) 2012-2020, Q3 2011-Present, TT (2nd Gen) 2006-2014, TT (3rd Gen) 2014-Present\u003c\/li\u003e\n\u003cli\u003eHyundai: Santa Fe (2nd Gen) 2006-2012, Santa Fe (3rd Gen) 2012-2018\u003c\/li\u003e\n\u003cli\u003eInfiniti: Q30 (1st Gen) 2015-2019, QX30 2016-2019\u003c\/li\u003e\n\u003cli\u003eLexus: CT 2010-Present, NX 2014-Present, UX 2018-Present\u003c\/li\u003e\n\u003cli\u003eMercedes-Benz: A-Class (3rd Gen) 2012-2018, B-Class (2nd Gen) 2011-2019, CLA-Class (1st Gen) 2013-2019, GLA-Class (1st Gen) 2013-2020\u003c\/li\u003e\n\u003cli\u003eSaab: 9-3 (2nd Gen) 2004-2011, 9-3 (2nd Gen) 2004-2011 2003-2012\u003c\/li\u003e\n\u003cli\u003eSkoda: Karoq 2017-Present, Kodiaq (1st Gen) 2016-2023, Kodiaq (2nd Gen) 2023-Present, Octavia (3rd Gen) 2012-Present, Octavia (4th Gen) 2019-Present, Superb (3rd Gen) 2015-2023, Superb (4th Gen) 2023-Present\u003c\/li\u003e\n\u003cli\u003eToyota: C-HR (1st Gen) 2016-Present, Corolla (12th Gen) 2018-Present, Prius (3rd Gen) 2009-2016, Prius (4th Gen) 2016-2019, Prius (5th Gen) 2023-Present, RAV4 (3rd Gen) 2005-2013, RAV4 (4th Gen) 2013-2018, RAV4 (5th Gen) 2018-2025, Yaris (2nd Gen) 2005-2012\u003c\/li\u003e\n\u003cli\u003eVolkswagen: Caddy (4th Gen) 2020-Present, Golf (4th Gen) 1997-2006, Golf (5th Gen) 2003-2009, Golf (6th Gen) 2008-2016, Golf (7th Gen) 2012-2020, Jetta (5th Gen) 2005-2010, Jetta (6th Gen) 2010-2018, Passat (6th Gen) 2005-2010, Passat (7th Gen) 2010-2014, Passat (8th Gen) 2014-2023, Passat (9th Gen) 2023-Present, Scirocco (3rd Gen) 2008-2017, Sharan (2nd Gen) 2010-Present, Tiguan (1st Gen) 2007-2016, Tiguan (2nd Gen) 2016-2025, Tiguan (3rd Gen) 2023-Present, Touran (2nd Gen) 2015-Present\u003c\/li\u003e\n\u003cli\u003eVolvo: S60 (1st Gen) 2000-2009, S80 (1st Gen) 1998-2006, V70 (2nd Gen) 2000-2007, XC70 (1st Gen) 2000-2007\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e For PQ35\/PQ46\/MQB Models OE Replacement (Front).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139446584,"sku":"HR-8793-340","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/2017291350913s50l9lg.jpg?v=1678899672"},{"product_id":"hardrace-adjustable-universal-drop-links-12mm-rod-ends-90-degree-rotated-280-319mm","title":"Hardrace Adjustable Universal Drop Links 12mm Rod Ends 90 Degree Rotated 280-319mm","description":"\u003ch2\u003eHardrace Adjustable Universal Drop Links 12mm Rod Ends 90 Degree Rotated 280-319mm – Stronger Than The Factory Links\u003c\/h2\u003e\n\u003cp\u003eDrop links connect the anti-roll bar to the suspension, so any play in them delays the bar's response. This Hardrace drop link set is a stronger upgrade that keeps the anti-roll bar working instantly and precisely, for flatter, more controlled cornering.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStronger than the factory links\u003c\/li\u003e\n\u003cli\u003eQuicker anti-roll bar response\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eCheck the size and fitment against your car before ordering, or contact us if you are unsure.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely. Remove the factory part and fit the Hardrace part in its place, tightening all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height. Have the alignment checked after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139479352,"sku":"HR-7750-300","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201512992409u2d40ms_73b2e11f-4136-4014-8308-bbc1f75702a7.jpg?v=1678899673"},{"product_id":"hardrace-adjustable-universal-drop-links-10mm-rod-ends-320-359mm-honda-civic-type-r-fk8-17-21","title":"Hardrace Adjustable Universal Drop Links 10mm Rod Ends 320-359mm Honda","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 320-359mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 320-359mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 320-359mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop link\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo \/ XC90 (1st Gen) 2002-2014 \/ SUV 2002-2014 \/ XC90 2.5 Turbo 2002-2006\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC90 (1st Gen) 2002-2014 \/ SUV 2002-2014 \/ XC90 3.2 2006-2012\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC90 (1st Gen) 2002-2014 \/ SUV 2002-2014 \/ XC90 4.4 2005-2010\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC90 (1st Gen) 2002-2014 \/ SUV 2002-2014 \/ XC90 D3 2.4 TD 2010-2014\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC90 (1st Gen) 2002-2014 \/ SUV 2002-2014 \/ XC90 D4 2.4 TD 2010-2014\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC90 (1st Gen) 2002-2014 \/ SUV 2002-2014 \/ XC90 D5 2.4 TD 2002-2014\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC90 (1st Gen) 2002-2014 \/ SUV 2002-2014 \/ XC90 T6 2.9 Twin Turbo 2002-2006\u003c\/li\u003e\n\u003cli\u003eHonda \/ HR-V (3rd Gen) 2021-Present \/ SUV (RV) 2021-Present \/ HR-V 1.5 Hybrid 2021-Present\u003c\/li\u003e\n\u003cli\u003eHonda \/ Civic 5-Door Hatchback \/ 2022-Present \/ 2.0 Type-R (FL5)\u003c\/li\u003e\n\u003cli\u003eHonda \/ ZR-V 2023-Present \/ SUV 2023-Present \/ ZR-V Hybrid 2.0 Turbo 2023-Present\u003c\/li\u003e\n\u003cli\u003eMini \/ Countryman (3rd Gen) 2023-Present \/ SUV (U25) 2023-Present \/ Countryman 1.5 Turbo 2023-Present\u003c\/li\u003e\n\u003cli\u003eMini \/ Countryman (3rd Gen) 2023-Present \/ SUV (U25) 2023-Present \/ Countryman D 2.0 TD 2024-Present\u003c\/li\u003e\n\u003cli\u003eMini \/ Countryman (3rd Gen) 2023-Present \/ SUV (U25) 2023-Present \/ Countryman S 2.0 Turbo (4WD) 2023-Present\u003c\/li\u003e\n\u003cli\u003eMini \/ Countryman (3rd Gen) 2023-Present \/ SUV (U25) 2023-Present \/ Countrymen Electric 2024-Present\u003c\/li\u003e\n\u003cli\u003eMini \/ Countryman (3rd Gen) 2023-Present \/ SUV (U25) 2023-Present \/ Countrymen Electric SE (4WD) 2024-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139512120,"sku":"HR-8659-340","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201662413314813l31i48ha.jpg?v=1678899673"},{"product_id":"hardrace-adjustable-universal-stabilizers-links-10mm-rod-ends-2pc-set","title":"Hardrace Adjustable Universal Stabilisers Links 10mm Rod Ends","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 90-99mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 90-99mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 90-99mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop link\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSee title\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139544888,"sku":"HR-6405","price":106.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/2016112215404815m40k48su.jpg?v=1678899675"},{"product_id":"hardrace-universal-adjustable-drop-link-set-range-81-91mm-10mm-stud-rod-end","title":"Hardrace Universal Adjustable Drop Link Set Range 81-91mm 10mm Stud Rod End","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 81-91mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 81-91mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 81-91mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNissan \/ Murano (1st Gen) 2002-2008 \/ SUV (Z50) 2002-2008 \/ Murano 3.5 2002-2006\u003c\/li\u003e\n\u003cli\u003eNissan \/ Murano (1st Gen) 2002-2008 \/ SUV (Z50) 2002-2008 \/ Murano 3.5 2006-2008\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139610424,"sku":"HR-6853-080","price":106.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hard-race-drops_18.jpg?v=1678899675"},{"product_id":"hardrace-universal-adjustable-stabilizer-link-2pcs-set-range-220-259mm-10mm-stud-rod-end","title":"Hardrace Universal Adjustable Stabiliser Link 220-259mm 10mm Stud Rod End","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 220-259mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 220-259mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 220-259mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW \/ 3-Series (2nd Gen) \/ Convertible (E30) \/ 1982-1994\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (2nd Gen) \/ Sedan (E30) \/ 1982-1994\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (3rd Gen) \/ Compact (E36) \/ 1990-2000\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (3rd Gen) \/ Convertible (E36) \/ 1990-2000\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (3rd Gen) \/ Coupe (E36) \/ 1990-2000\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (3rd Gen) \/ Sedan (E36) \/ 1990-2000\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (3rd Gen) \/ Touring (E36) \/ 1990-2000\u003c\/li\u003e\n\u003cli\u003eBMW \/ 5-Series (2nd Gen) \/ Sedan (E28) \/ 1980-1987\u003c\/li\u003e\n\u003cli\u003eBMW \/ 5-Series (3rd Gen) \/ Sedan (E34) \/ 1986-1997\u003c\/li\u003e\n\u003cli\u003eBMW \/ 5-Series (3rd Gen) \/ Touring (E34) \/ 1987-1997\u003c\/li\u003e\n\u003cli\u003eBMW \/ 7-Series (2nd Gen) \/ Sedan (E32) \/ 1986-1994\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e E30: For M3 use only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-universal-drop-links-bushes-10mm-id-4pc-set\"\u003eHardrace Universal Drop Links Bushes 10mm ID 4Pc Set\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139675960,"sku":"HR-8659-240","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/8659-240_main.jpg?v=1678899676"},{"product_id":"hardrace-universal-adjustable-drop-link-set-range-90-99mm-10mm-stud-rod-end","title":"Hardrace Universal Adjustable Drop Link Set Range 90-99mm 10mm Stud Rod End","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 90-99mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 90-99mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 90-99mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop link\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSee title\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139708728,"sku":"HR-6853-090","price":106.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hard-race-drops_16.jpg?v=1678899677"},{"product_id":"hardrace-universal-adjustable-stabilizer-link-range-320-359mm-10mm-stud-rod-end-2pcs-set","title":"Hardrace Universal Adjustable Stabiliser Link Range:320-359mm 10mm Stud","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 320-359mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 320-359mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 320-359mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop link\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSee title\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780140560696,"sku":"HR-8863-340","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/8863-340_main.jpg?v=1678899678"},{"product_id":"hardrace-adjustable-10mm-camber-bolts-2-to-2-degree-range","title":"Hardrace Adjustable 10mm Camber Bolts -2 To +2 Degree Range","description":"\u003ch2\u003eHardrace Adjustable Camber Bolts 10mm – Adjustable Camber\u003c\/h2\u003e\n\u003cp\u003eMany cars have no factory camber adjustment on the strut. These Hardrace adjustable camber bolts fit in place of the strut-to-hub bolts and let you adjust camber, so you can dial in the alignment after lowering for even tyre wear and more grip.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdds camber adjustment at the strut\u003c\/li\u003e\n\u003cli\u003eEven tyre wear and more grip after lowering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable camber bolts 10mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eUniversal. Suits struts that use 10mm strut-to-hub bolts. Measure your bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, remove the wheel and swap one of the strut-to-hub bolts at a time for a Hardrace camber bolt. Set the camber, tighten to the vehicle manufacturer's torque figures and have a full alignment done. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eHow much camber do they add?\u003c\/h3\u003e\n\u003cp\u003eThe amount depends on the car. Have a full alignment done after fitting to set the camber you want.\u003c\/p\u003e\n\u003ch3\u003eWill they fit my car?\u003c\/h3\u003e\n\u003cp\u003eCheck the bolt size against your strut-to-hub bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141117752,"sku":"HR-6700","price":53.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/6700.jpg?v=1678899679"},{"product_id":"hardrace-adjustable-12mm-camber-bolts-2-to-2-degree-range","title":"Hardrace Adjustable 12mm Camber Bolts -2 To +2 Degree Range","description":"\u003ch2\u003eHardrace Adjustable Camber Bolts 12mm – Adjustable Camber\u003c\/h2\u003e\n\u003cp\u003eMany cars have no factory camber adjustment on the strut. These Hardrace adjustable camber bolts fit in place of the strut-to-hub bolts and let you adjust camber, so you can dial in the alignment after lowering for even tyre wear and more grip.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdds camber adjustment at the strut\u003c\/li\u003e\n\u003cli\u003eEven tyre wear and more grip after lowering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable camber bolts 12mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eUniversal. Suits struts that use 12mm strut-to-hub bolts. Measure your bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, remove the wheel and swap one of the strut-to-hub bolts at a time for a Hardrace camber bolt. Set the camber, tighten to the vehicle manufacturer's torque figures and have a full alignment done. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-14mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 14mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-15mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 15mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-16mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 16mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow much camber do they add?\u003c\/h3\u003e\n\u003cp\u003eThe amount depends on the car. Have a full alignment done after fitting to set the camber you want.\u003c\/p\u003e\n\u003ch3\u003eWill they fit my car?\u003c\/h3\u003e\n\u003cp\u003eCheck the bolt size against your strut-to-hub bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141150520,"sku":"HR-6701","price":53.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/6701.jpg?v=1678899680"},{"product_id":"hardrace-adjustable-14mm-camber-bolts-2-to-2-degree-range","title":"Hardrace Adjustable 14mm Camber Bolts -2 To +2 Degree Range","description":"\u003ch2\u003eHardrace Adjustable Camber Bolts 14mm – Adjustable Camber\u003c\/h2\u003e\n\u003cp\u003eMany cars have no factory camber adjustment on the strut. These Hardrace adjustable camber bolts fit in place of the strut-to-hub bolts and let you adjust camber, so you can dial in the alignment after lowering for even tyre wear and more grip.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdds camber adjustment at the strut\u003c\/li\u003e\n\u003cli\u003eEven tyre wear and more grip after lowering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable camber bolts 14mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eUniversal. Suits struts that use 14mm strut-to-hub bolts. Measure your bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, remove the wheel and swap one of the strut-to-hub bolts at a time for a Hardrace camber bolt. Set the camber, tighten to the vehicle manufacturer's torque figures and have a full alignment done. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-12mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 12mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-15mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 15mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-16mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 16mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow much camber do they add?\u003c\/h3\u003e\n\u003cp\u003eThe amount depends on the car. Have a full alignment done after fitting to set the camber you want.\u003c\/p\u003e\n\u003ch3\u003eWill they fit my car?\u003c\/h3\u003e\n\u003cp\u003eCheck the bolt size against your strut-to-hub bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141183288,"sku":"HR-6702","price":53.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/6700_1.jpg?v=1678899680"},{"product_id":"hardrace-adjustable-15mm-camber-bolts-2-to-2-degree-range","title":"Hardrace Adjustable 15mm Camber Bolts -2 To +2 Degree Range","description":"\u003ch2\u003eHardrace Adjustable Camber Bolts 15mm – Adjustable Camber\u003c\/h2\u003e\n\u003cp\u003eMany cars have no factory camber adjustment on the strut. These Hardrace adjustable camber bolts fit in place of the strut-to-hub bolts and let you adjust camber, so you can dial in the alignment after lowering for even tyre wear and more grip.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdds camber adjustment at the strut\u003c\/li\u003e\n\u003cli\u003eEven tyre wear and more grip after lowering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable camber bolts 15mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eUniversal. Suits struts that use 15mm strut-to-hub bolts. Measure your bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, remove the wheel and swap one of the strut-to-hub bolts at a time for a Hardrace camber bolt. Set the camber, tighten to the vehicle manufacturer's torque figures and have a full alignment done. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-12mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 12mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-14mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 14mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-16mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 16mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow much camber do they add?\u003c\/h3\u003e\n\u003cp\u003eThe amount depends on the car. Have a full alignment done after fitting to set the camber you want.\u003c\/p\u003e\n\u003ch3\u003eWill they fit my car?\u003c\/h3\u003e\n\u003cp\u003eCheck the bolt size against your strut-to-hub bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141216056,"sku":"HR-6703","price":53.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/6700_2.jpg?v=1678899681"},{"product_id":"hardrace-adjustable-16mm-camber-bolts-2-to-2-degree-range","title":"Hardrace Adjustable 16mm Camber Bolts -2 To +2 Degree Range","description":"\u003ch2\u003eHardrace Adjustable Camber Bolts 16mm – Adjustable Camber\u003c\/h2\u003e\n\u003cp\u003eMany cars have no factory camber adjustment on the strut. These Hardrace adjustable camber bolts fit in place of the strut-to-hub bolts and let you adjust camber, so you can dial in the alignment after lowering for even tyre wear and more grip.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdds camber adjustment at the strut\u003c\/li\u003e\n\u003cli\u003eEven tyre wear and more grip after lowering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable camber bolts 16mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eUniversal. Suits struts that use 16mm strut-to-hub bolts. Measure your bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, remove the wheel and swap one of the strut-to-hub bolts at a time for a Hardrace camber bolt. Set the camber, tighten to the vehicle manufacturer's torque figures and have a full alignment done. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-12mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 12mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-14mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 14mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-15mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 15mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow much camber do they add?\u003c\/h3\u003e\n\u003cp\u003eThe amount depends on the car. Have a full alignment done after fitting to set the camber you want.\u003c\/p\u003e\n\u003ch3\u003eWill they fit my car?\u003c\/h3\u003e\n\u003cp\u003eCheck the bolt size against your strut-to-hub bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141248824,"sku":"HR-6704","price":53.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/6701_1.jpg?v=1678899683"},{"product_id":"hardrace-adjustable-17mm-camber-bolts-2-to-2-degree-range","title":"Hardrace Adjustable 17mm Camber Bolts -2 To +2 Degree Range","description":"\u003ch2\u003eHardrace Adjustable Camber Bolts 17mm – Adjustable Camber\u003c\/h2\u003e\n\u003cp\u003eMany cars have no factory camber adjustment on the strut. These Hardrace adjustable camber bolts fit in place of the strut-to-hub bolts and let you adjust camber, so you can dial in the alignment after lowering for even tyre wear and more grip.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdds camber adjustment at the strut\u003c\/li\u003e\n\u003cli\u003eEven tyre wear and more grip after lowering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable camber bolts 17mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eUniversal. Suits struts that use 17mm strut-to-hub bolts. Measure your bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, remove the wheel and swap one of the strut-to-hub bolts at a time for a Hardrace camber bolt. Set the camber, tighten to the vehicle manufacturer's torque figures and have a full alignment done. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-12mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 12mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-14mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 14mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-15mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 15mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow much camber do they add?\u003c\/h3\u003e\n\u003cp\u003eThe amount depends on the car. Have a full alignment done after fitting to set the camber you want.\u003c\/p\u003e\n\u003ch3\u003eWill they fit my car?\u003c\/h3\u003e\n\u003cp\u003eCheck the bolt size against your strut-to-hub bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141281592,"sku":"HR-6705","price":53.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/6700_3.jpg?v=1678899683"},{"product_id":"hardrace-rear-camber-toe-adjustable-spacer-red-camber-1-5-1-5-toe-1-5-1-5-2pcs-set","title":"Hardrace Rear Camber\/Toe Adjustable Spacer Red Camber\/Toe -1.5 -1.5 2Pcs","description":"\u003ch2\u003eHardrace Rear Camber\/Toe Adjustable Spacer Red Camber\/Toe -1.5 -1.5 – Corrects Rear Camber And Toe\u003c\/h2\u003e\n\u003cp\u003eLowering a car changes the rear alignment, often with no factory adjustment to correct it. This Hardrace adjusting spacer set corrects the camber and toe, for better tyre wear and more grip.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCorrects rear camber and toe\u003c\/li\u003e\n\u003cli\u003eBetter tyre wear and more grip\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eCheck the size and fitment against your car before ordering, or contact us if you are unsure.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely. Remove the factory part and fit the Hardrace part in its place, tightening all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height. Have the alignment checked after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141314360,"sku":"HR-6780","price":58.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hardrace-placeholder_6ed62565-b2f7-465c-b239-3d9155278135.jpg?v=1678899683"},{"product_id":"hardrace-rear-camber-toe-adjustable-spacer-blue-camber-1-5-1-5-toe-1-5-1-5-2pcs-set","title":"Hardrace Rear Camber\/Toe Adjustable Spacer Blue Camber\/Toe -1.5 -1.5 2Pcs","description":"\u003ch2\u003eHardrace Rear Camber\/Toe Adjustable Spacer Blue Camber\/Toe -1.5 -1.5 – Corrects Rear Camber And Toe\u003c\/h2\u003e\n\u003cp\u003eLowering a car changes the rear alignment, often with no factory adjustment to correct it. This Hardrace adjusting spacer set corrects the camber and toe, for better tyre wear and more grip.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCorrects rear camber and toe\u003c\/li\u003e\n\u003cli\u003eBetter tyre wear and more grip\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eCheck the size and fitment against your car before ordering, or contact us if you are unsure.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely. Remove the factory part and fit the Hardrace part in its place, tightening all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height. Have the alignment checked after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141379896,"sku":"HR-7485","price":48.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hardrace-placeholder_f89ffe91-cd0a-44f7-9d20-d02f44a769de.jpg?v=1678899685"},{"product_id":"hardrace-rear-camber-toe-adjustable-spacer-grey-camber-1-5-1-5-toe-1-5-1-5-2pcs-set","title":"Hardrace Rear Camber\/Toe Adjustable Spacer Grey Camber:-1.5 ~ -1.5\/Toe:-1.5 ~ -1.5 2Pcs","description":"\u003ch2\u003eHardrace Rear Camber\/Toe Adjustable Spacer Grey Camber:-1.5 ~ -1.5\/Toe:-1.5 ~ -1.5 – Corrects Rear Camber And Toe\u003c\/h2\u003e\n\u003cp\u003eLowering a car changes the rear alignment, often with no factory adjustment to correct it. This Hardrace adjusting spacer set corrects the camber and toe, for better tyre wear and more grip.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCorrects rear camber and toe\u003c\/li\u003e\n\u003cli\u003eBetter tyre wear and more grip\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eCheck the size and fitment against your car before ordering, or contact us if you are unsure.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely. Remove the factory part and fit the Hardrace part in its place, tightening all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height. Have the alignment checked after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141609272,"sku":"HR-7486","price":48.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hardrace-placeholder_1fd92285-ca9a-4e8b-b6ce-ef3b1fdd9687.jpg?v=1678899686"}],"url":"https:\/\/hardraceshop.com\/collections\/hardrace-infiniti-suspension-parts.oembed","provider":"Hardrace Shop","version":"1.0","type":"link"}