{"title":"Hardrace Mitsubishi Lancer Evo Suspension Parts","description":"\u003cp\u003eHardrace \u003ca href=\"\/collections\/hardrace-mitsubishi-suspension-components\"\u003eMitsubishi\u003c\/a\u003e Lancer Evo suspension parts from the 1992-2000 Evo 1-3 through the 1996-2007 Evo 4-9 to the 2007-2016 Evo X: spherical rear toe and lower arms, rear camber kits, hardened rubber or spherical bushes for the trailing arms, upper control arms and diff supports, drop links and engine mounts for the Evo 7-9.\u003c\/p\u003e\u003cp\u003eMost of the Lancer Evo range sits at the rear. Spherical toe and lower arms for the Evo 4-9 set geometry after lowering, with a hardened rubber camber kit for the Evo 1-3 for a quieter road car. Every bush comes in hardened rubber, keeping the OE feel while removing slop, or spherical bearing for the sharpest response at the cost of road noise. The Evo 4-9 also get a rear upper arm ball joint, the Evo 4-6 a front roll centre adjuster.\u003c\/p\u003e\u003cp\u003eThe Evo 7-9 has the deepest list: 5MT and 6MT engine mounts in JDM and USDM versions, front lower arm bushes, tie rods, a front member brace and extended wheel studs. The Evo 9, Evo 6 and Evo X pages split the Lancer Evo parts by generation. Free UK delivery over £100.\u003c\/p\u003e","products":[{"product_id":"hardrace-race-series-hardened-front-side-engine-mount-1pc-set-mitsubishi-evo-10-09","title":"Hardrace Race Series Hardened Front Side Engine Mount Mitsubishi Evo 10 06+","description":"\u003ch2\u003eHardrace Hardened Front Side Engine Mount AT MT Race for Mitsubishi Lancer CY (2007-2017) and Mitsubishi Outlander CW (2007-2012) – Less Engine Movement, Sharper Response\u003c\/h2\u003e\n\u003cp\u003eSoft factory mounts let the engine and gearbox rock under acceleration, braking and gear changes, which blunts throttle response, makes shifts vague and can cause wheel hop. This Hardrace hardened front side engine mount is a firmer upgrade that holds the drivetrain in place, so power goes down more cleanly and the car feels tighter and more responsive.\u003c\/p\u003e\n\u003cp\u003eOn the Lancer and Evo, firmer mounts help the drivetrain cope with hard launches and boost, cutting wheel hop and making shifts more positive.\u003c\/p\u003e\n\u003cp\u003eIt uses hardened rubber, a high-strength, anti-crack compound that is firmer than the factory rubber but still absorbs some vibration. This is the race version, the firmest option, aimed at track and competition use.\u003c\/p\u003e\n\u003cp\u003eIt suits the Mitsubishi Lancer CY (2007-2017) and Mitsubishi Outlander CW (2007-2012).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer than the factory mount\u003c\/li\u003e\n\u003cli\u003eLess engine and gearbox movement\u003c\/li\u003e\n\u003cli\u003eSharper throttle response and more precise gear changes\u003c\/li\u003e\n\u003cli\u003eHelps reduce wheel hop\u003c\/li\u003e\n\u003cli\u003eHardened rubber: firm but still absorbs vibration\u003c\/li\u003e\n\u003cli\u003eRace version\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHardened front side engine mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMitsubishi \/ Lancer (8th Gen) 2007-2017 \/ Sedan (CY) 2007-2017 \/ Lancer Evolution X 2.0 Turbo (CZ4A) 2008-2016\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Outlander (2nd Gen) 2007-2012 \/ SUV (CW) 2007-2012 \/ Outlander 2.0 TD 2007-2010\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Outlander (2nd Gen) 2007-2012 \/ SUV (CW) 2007-2012 \/ Outlander 2.2 TD 2007-2010\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Outlander (2nd Gen) 2007-2012 \/ SUV (CW) 2007-2012 \/ Outlander 2.2 TD 2010-2012\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Outlander (2nd Gen) 2007-2012 \/ SUV (CW) 2007-2012 \/ Outlander 2.4 2007-2008\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Outlander (2nd Gen) 2007-2012 \/ SUV (CW) 2007-2012 \/ Outlander 2.4 2008-2012\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Race Version For AT \/ MT use Location: Front Side.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the engine and gearbox with a jack or engine support bar before undoing any mount, and work on one mount at a time so the drivetrain stays aligned. Remove the factory mount and bolt the Hardrace mount in its place. Tighten all fixings to the vehicle manufacturer's torque figures. Expect a little more vibration than standard. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-race-series-hardened-left-side-engine-mount-mitsubishi-lancer-fortis-galant-07-12\"\u003eHardrace Race Series Hardened Left Side Engine Mount Mitsubishi Lancer Fortis Galant 07-12\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-race-series-hardened-rear-engine-mount-1pc-set-mitsubishi-evo-x-07-16\"\u003eHardrace Race Series Hardened Rear Engine Mount 1Pc Set Mitsubishi Evo X 07-16\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill it increase vibration?\u003c\/h3\u003e\n\u003cp\u003eYes, a little. Firmer mounts pass more engine vibration into the cabin, especially at idle, and the race version more so.\u003c\/p\u003e\n\u003ch3\u003eShould I upgrade all the mounts at once?\u003c\/h3\u003e\n\u003cp\u003eUpgrading the matching mounts together gives the most consistent result, but each mount can be fitted on its own.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between the street and race versions?\u003c\/h3\u003e\n\u003cp\u003eThe street version is firm enough to cut movement but stays comfortable for daily driving. The race version is firmer still, for track and competition cars, and passes on more vibration.\u003c\/p\u003e\n\u003ch3\u003eDoes it suit manual or automatic cars?\u003c\/h3\u003e\n\u003cp\u003eHardrace lists it for manual and automatic models. Check the note in the Fitment section against your engine and gearbox before ordering.\u003c\/p\u003e\n\u003ch3\u003eDoes it come ready to fit?\u003c\/h3\u003e\n\u003cp\u003eYes. It is a complete mount, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780050514232,"sku":"HR-7167","price":88.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201511251058210n58p2al.jpg?v=1678898632"},{"product_id":"hardrace-mitsubishi-lancer-evolution-7th-9th-brake-master-cylinder-stopper-for-rhd-models","title":"Hardrace Brake Master Cylinder Stopper Mitsubishi Evo 7 8 9 01-07","description":"\u003ch2\u003eHardrace Brake Master Cylinder Stopper for Mitsubishi Lancer CS\/CY (2003-2017) (RHD) – Firmer, More Consistent Pedal\u003c\/h2\u003e\n\u003cp\u003eUnder hard braking the brake master cylinder can flex the bulkhead it is mounted to, which makes the pedal feel soft and long. This Hardrace brake master cylinder stopper braces the master cylinder against the bulkhead, so the pedal feels firmer and more consistent and you can modulate the brakes more precisely.\u003c\/p\u003e\n\u003cp\u003eThis version is for RHD cars.\u003c\/p\u003e\n\u003cp\u003eIt suits the Mitsubishi Lancer CS\/CY (2003-2017).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer, more consistent brake pedal\u003c\/li\u003e\n\u003cli\u003eStops the master cylinder flexing the bulkhead\u003c\/li\u003e\n\u003cli\u003eMore precise brake modulation\u003c\/li\u003e\n\u003cli\u003eBolt-on fitting\u003c\/li\u003e\n\u003cli\u003eRHD version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrake master cylinder stopper\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution IX 2.0 Turbo (CT9A) 2005-2008\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution IX FQ-360 2.0 Turbo (CT9A) 2005-2008\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution VIII 2.0 Turbo (CT9A) 2004-2005\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution VIII FQ-400 2.0 Turbo (400HP\/294KW) 2004-2005\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (8th Gen) 2007-2017 \/ Sedan (CY) 2007-2017 \/ Lancer Evolution X 2.0 Turbo (CZ4A) 2008-2016\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (8th Gen) 2007-2017 \/ Sedan (CY) 2007-2017 \/ Lancer Evolution X FQ-400 2.0 Turbo (400HP\/294KW) 2008-2016\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (8th Gen) 2007-2017 \/ Sedan (CY) 2007-2017 \/ Lancer Evolution X GSR 2.0 Turbo 2008-2011\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e For RHD use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eOpen the bonnet and fit the stopper so it braces the brake master cylinder against the bulkhead, following the Hardrace instructions. Make sure it doesn't press on any pipes or wiring, and check the brake pedal feel before driving. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-mitsubishi-lancer-evolution-7-9th-front-member-brace-1pcs-set\"\u003eHardrace Front Member Brace 1Pcs Mitsubishi Lancer Evolution 7-9\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIs it the right one for my car?\u003c\/h3\u003e\n\u003cp\u003eCheck LHD or RHD first: master cylinder stoppers are made for one drive side only. The note in the Fitment section says which this one is.\u003c\/p\u003e\n\u003ch3\u003eDoes it change the brakes themselves?\u003c\/h3\u003e\n\u003cp\u003eNo. It only stops the master cylinder moving, so the pedal feels firmer. It works with standard or uprated brakes.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780053856568,"sku":"HR-Q0922","price":79.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0922_main_1.jpg?v=1678898671"},{"product_id":"hardrace-hardened-rubber-rear-toe-arm-bushes-4pc-set-mitsubishi-lancer-virage-evo-1-3-93-00","title":"Hardrace Rubber Rear Toe Arm Bushes Mitsubishi Lancer Virage Evo 92-00","description":"\u003ch2\u003eHardrace Rear Toe Arm Bushes Hardened Rubber for Mitsubishi Colt CA0\/CJ (1992-2003) and Mitsubishi Lancer CB (1992-1996) – Firmer Location, Sharper Handling\u003c\/h2\u003e\n\u003cp\u003eFactory suspension bushes are built for comfort, so they flex under cornering, braking and acceleration and let the suspension move around. These Hardrace rear toe arm bushes are a firmer upgrade that fits into the factory parts, so the suspension is located more precisely and the car feels sharper and more consistent.\u003c\/p\u003e\n\u003cp\u003eThe Lancer and Evo chassis responds well to firmer bushes, giving a more precise feel and more consistent grip when driven hard.\u003c\/p\u003e\n\u003cp\u003eThey are made from hardened rubber, a high-strength, anti-crack compound that is firmer than the factory bushes but still absorbs vibration.\u003c\/p\u003e\n\u003cp\u003eIt suits the Mitsubishi Colt CA0\/CJ (1992-2003) and Mitsubishi Lancer CB (1992-1996).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer than the factory bushes\u003c\/li\u003e\n\u003cli\u003eSharper, more consistent handling\u003c\/li\u003e\n\u003cli\u003eHardened rubber: firm but still absorbs vibration\u003c\/li\u003e\n\u003cli\u003e4-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear toe arm bushes (4 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMitsubishi \/ Colt (4th Gen) 1992-1996 \/ Hatchback (CA0) 1992-1996 \/ Colt 1.3 (CA1A) 1992-1996\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Colt (4th Gen) 1992-1996 \/ Hatchback (CA0) 1992-1996 \/ Colt 1.6 (CA4A) 1992-1996\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Colt (4th Gen) 1992-1996 \/ Hatchback (CA0) 1992-1996 \/ Colt 1.8 GTi (CA5A) 1992-1996\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Colt (5th Gen) 1996-2003 \/ Hatchback (CJ) 1996-2003 \/ Colt 1.3 (CJ1A) 1996-2003\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Colt (5th Gen) 1996-2003 \/ Hatchback (CJ) 1996-2003 \/ Colt 1.6 (CJ4A) 1996-2003\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (5th Gen) 1992-1996 \/ Sedan (CB) 1992-1996 \/ Lancer Evolution I 2.0 Turbo (CD9A) 1992-1994\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (5th Gen) 1992-1996 \/ Sedan (CB) 1992-1996 \/ Lancer Evolution II 2.0 Turbo (CE9A) 1994-1995\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (5th Gen) 1992-1996 \/ Sedan (CB) 1992-1996 \/ Lancer Evolution III 2.0 Turbo (CE9A) 1995-1996\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe bushes press into the factory parts, so the part needs removing from the car and a hydraulic press is needed to press the old bushes out and the new Hardrace bushes in. Refit the part and tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-tpv-steering-bush-2pc-set-mitsubishi-lancer-virage-93-00\"\u003eHardrace TPV Steering Bush 2Pc Set Mitsubishi Lancer Virage 93-00\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-rubber-rear-upper-arm-bushes-4pc-set-mitsubishi-lancer-virage-evo-1-3-93-00\"\u003eHardrace Hardened Rubber Rear Upper Arm Bushes 4Pc Set Mitsubishi Lancer Virage Evo 1-3 93\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-rubber-rear-lower-arm-bushes-4pc-set-mitsubishi-lancer-evo-1-3-93-00\"\u003eHardrace Hardened Rubber Rear Lower Arm Bushes 4Pc Set Mitsubishi Lancer Evo 1-3 93-00\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need a press?\u003c\/h3\u003e\n\u003cp\u003eYes. The old bushes must be pressed out and the new ones pressed in with a hydraulic press.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes, have a full four-wheel alignment done after fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eOnly slightly. The hardened rubber is firmer than the factory bushes but still absorbs vibration, so it stays comfortable for everyday driving.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780055101752,"sku":"HR-7121","price":66.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20155291673216k7a32lz.jpg?v=1678898690"},{"product_id":"hardrace-hardened-rubber-rear-upper-arm-bushes-4pc-set-mitsubishi-lancer-virage-evo-1-3-93-00","title":"Hardrace Rubber Rear Upper Arm Bushes Mitsubishi Lancer Virage 92-00","description":"\u003ch2\u003eHardrace Rear Upper Arm Bushes Hardened Rubber for Mitsubishi Colt CA0\/CJ (1992-2003) and Mitsubishi Lancer CB (1992-1996) – Firmer Location, Sharper Handling\u003c\/h2\u003e\n\u003cp\u003eFactory suspension bushes are built for comfort, so they flex under cornering, braking and acceleration and let the suspension move around. These Hardrace rear upper arm bushes are a firmer upgrade that fits into the factory parts, so the suspension is located more precisely and the car feels sharper and more consistent.\u003c\/p\u003e\n\u003cp\u003eThe Lancer and Evo chassis responds well to firmer bushes, giving a more precise feel and more consistent grip when driven hard.\u003c\/p\u003e\n\u003cp\u003eThey are made from hardened rubber, a high-strength, anti-crack compound that is firmer than the factory bushes but still absorbs vibration.\u003c\/p\u003e\n\u003cp\u003eIt suits the Mitsubishi Colt CA0\/CJ (1992-2003) and Mitsubishi Lancer CB (1992-1996).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer than the factory bushes\u003c\/li\u003e\n\u003cli\u003eSharper, more consistent handling\u003c\/li\u003e\n\u003cli\u003eHardened rubber: firm but still absorbs vibration\u003c\/li\u003e\n\u003cli\u003e4-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear upper arm bushes (4 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMitsubishi \/ Colt (4th Gen) 1992-1996 \/ Hatchback (CA0) 1992-1996 \/ Colt 1.3 (CA1A) 1992-1996\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Colt (4th Gen) 1992-1996 \/ Hatchback (CA0) 1992-1996 \/ Colt 1.6 (CA4A) 1992-1996\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Colt (4th Gen) 1992-1996 \/ Hatchback (CA0) 1992-1996 \/ Colt 1.8 GTi (CA5A) 1992-1996\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Colt (5th Gen) 1996-2003 \/ Hatchback (CJ) 1996-2003 \/ Colt 1.3 (CJ1A) 1996-2003\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Colt (5th Gen) 1996-2003 \/ Hatchback (CJ) 1996-2003 \/ Colt 1.6 (CJ4A) 1996-2003\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (5th Gen) 1992-1996 \/ Sedan (CB) 1992-1996 \/ Lancer Evolution I 2.0 Turbo (CD9A) 1992-1994\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (5th Gen) 1992-1996 \/ Sedan (CB) 1992-1996 \/ Lancer Evolution II 2.0 Turbo (CE9A) 1994-1995\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (5th Gen) 1992-1996 \/ Sedan (CB) 1992-1996 \/ Lancer Evolution III 2.0 Turbo (CE9A) 1995-1996\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe bushes press into the factory parts, so the part needs removing from the car and a hydraulic press is needed to press the old bushes out and the new Hardrace bushes in. Refit the part and tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-tpv-steering-bush-2pc-set-mitsubishi-lancer-virage-93-00\"\u003eHardrace TPV Steering Bush 2Pc Set Mitsubishi Lancer Virage 93-00\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-rubber-rear-toe-arm-bushes-4pc-set-mitsubishi-lancer-virage-evo-1-3-93-00\"\u003eHardrace Hardened Rubber Rear Toe Arm Bushes 4Pc Set Mitsubishi Lancer Virage Evo 1-3 93-0\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-rubber-rear-lower-arm-bushes-4pc-set-mitsubishi-lancer-evo-1-3-93-00\"\u003eHardrace Hardened Rubber Rear Lower Arm Bushes 4Pc Set Mitsubishi Lancer Evo 1-3 93-00\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need a press?\u003c\/h3\u003e\n\u003cp\u003eYes. The old bushes must be pressed out and the new ones pressed in with a hydraulic press.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes, have a full four-wheel alignment done after fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eOnly slightly. The hardened rubber is firmer than the factory bushes but still absorbs vibration, so it stays comfortable for everyday driving.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780055232824,"sku":"HR-7122","price":66.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20155291684816o8s48zl.jpg?v=1678898693"},{"product_id":"hardrace-rear-lower-arm-adjustable-harden-rubber-2-piece-set-mitsubishi-evo-x-cz4a","title":"Hardrace Rear Lower Arm-Adj Harden Rubber Mitsubishi Evo X CZ4A 07-16","description":"\u003ch2\u003eHardrace Adjustable Rear Lower Arms Hardened Rubber for Mitsubishi Lancer CY (2007-2017) – Adjustable Geometry, Sharper Handling\u003c\/h2\u003e\n\u003cp\u003eFactory control arms are built for comfort, with soft rubber bushes that let the wheel move around under cornering, braking and acceleration. These Hardrace rear lower arms are an upgrade over the factory parts. Each one locates the suspension far more firmly, so the car feels sharper and more consistent through corners and over bumps.\u003c\/p\u003e\n\u003cp\u003eThe Lancer and Evo chassis responds well to firmer suspension location, giving a more precise feel and more consistent grip when the car is driven hard.\u003c\/p\u003e\n\u003cp\u003eThey use hardened rubber bushes, a high-strength, anti-crack compound that is firmer than the factory bushes but still absorbs vibration. The length is adjustable, so you can fine-tune the geometry.\u003c\/p\u003e\n\u003cp\u003eIt suits the Mitsubishi Lancer (8th Gen) 2007-2017.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer suspension location than the factory arms\u003c\/li\u003e\n\u003cli\u003eSharper, more consistent handling\u003c\/li\u003e\n\u003cli\u003eAdjustable length to fine-tune the geometry\u003c\/li\u003e\n\u003cli\u003eHardened rubber bushes for firm, quiet control\u003c\/li\u003e\n\u003cli\u003eHigh-strength steel construction\u003c\/li\u003e\n\u003cli\u003eSupplied complete with bushes or joints fitted, so no press is needed\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear lower arms (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMitsubishi \/ Lancer (8th Gen) 2007-2017 \/ Sedan (CY) 2007-2017 \/ Lancer Evolution X 2.0 Turbo (CZ4A) 2008-2016\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on axle stands or a ramp. Remove the factory arm and bolt the Hardrace arm in its place; it comes complete with its bushes or joints fitted, so no press is needed. Set adjustable arms to the same length as the factory parts to start. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-rear-lower-arm-with-spherical-bearings-2pc-set-mitsubishi-evo-x-07-16\"\u003eHardrace Adjustable Rear Lower Arm With Spherical Bearings 2Pc Set Mitsubishi Evo X 07-16\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes. Have a full four-wheel alignment done after fitting, and use it to set the adjustable arms to the settings you want.\u003c\/p\u003e\n\u003ch3\u003eDoes it come with the bushes fitted?\u003c\/h3\u003e\n\u003cp\u003eYes. The arm comes complete with its bushes or joints already fitted, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eOnly slightly. The hardened rubber is firmer than the factory bushes but still absorbs vibration, so it stays comfortable for everyday driving.\u003c\/p\u003e\n\u003ch3\u003eHow is it adjusted?\u003c\/h3\u003e\n\u003cp\u003eThe arm length is set with the adjuster and locked with lock nuts. Set it to the factory length first, then fine-tune it during the alignment.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780055691576,"sku":"HR-8984","price":219.36,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hardrace-part-8984.jpg?v=1678898710"},{"product_id":"hardrace-mitsubishi-lancer-evolution-7-9th-front-member-brace-1pcs-set","title":"Hardrace Front Member Brace Mitsubishi Lancer Evolution 7-9 01-07","description":"\u003ch2\u003eHardrace Front Member Brace for Mitsubishi Lancer CS\/CY (2003-2017) – Stiffer Chassis, Sharper Handling\u003c\/h2\u003e\n\u003cp\u003eThe subframe carries the suspension, and under hard cornering and braking it can flex and shift on its mounts. This Hardrace front member brace stiffens it and ties it to the chassis, so the suspension stays where it should and the car feels tighter and more planted.\u003c\/p\u003e\n\u003cp\u003eIt bolts to existing mounting points with no cutting or drilling.\u003c\/p\u003e\n\u003cp\u003eThe Lancer and Evo chassis responds well to extra bracing, with a tighter, more precise feel when the car is pushed.\u003c\/p\u003e\n\u003cp\u003eIt suits the Mitsubishi Lancer CS\/CY (2003-2017).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStiffens the subframe\u003c\/li\u003e\n\u003cli\u003eKeeps the suspension geometry consistent\u003c\/li\u003e\n\u003cli\u003eTighter, more planted feel\u003c\/li\u003e\n\u003cli\u003eBolts to existing mounting points\u003c\/li\u003e\n\u003cli\u003eNo cutting or drilling required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront member brace\u003c\/li\u003e\n\u003cli\u003eFitting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution IX 2.0 Turbo (CT9A) 2005-2008\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution IX FQ-360 2.0 Turbo (CT9A) 2005-2008\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution VIII 2.0 Turbo (CT9A) 2004-2005\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution VIII FQ-400 2.0 Turbo (400HP\/294KW) 2004-2005\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (8th Gen) 2007-2017 \/ Sedan (CY) 2007-2017 \/ Lancer Evolution X 2.0 Turbo (CZ4A) 2008-2016\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (8th Gen) 2007-2017 \/ Sedan (CY) 2007-2017 \/ Lancer Evolution X FQ-400 2.0 Turbo (400HP\/294KW) 2008-2016\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (8th Gen) 2007-2017 \/ Sedan (CY) 2007-2017 \/ Lancer Evolution X GSR 2.0 Turbo 2008-2011\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on a ramp or axle stands. Bolt the brace to the existing mounting points around the subframe and tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No cutting, drilling or alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-mitsubishi-lancer-evolution-7th-9th-brake-master-cylinder-stopper-for-rhd-models\"\u003eHardrace Brake Master Cylinder Stopper Mitsubishi Lancer Evolution 7Th-9Th RHD\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. The brace does not change the suspension geometry.\u003c\/p\u003e\n\u003ch3\u003eWill it reduce ground clearance?\u003c\/h3\u003e\n\u003cp\u003eIt sits close to the floor or subframe, so it only reduces ground clearance slightly.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eNo. A brace stiffens the chassis, not the suspension, so the ride comfort is largely unchanged.\u003c\/p\u003e\n\u003ch3\u003eCan I fit it with other braces?\u003c\/h3\u003e\n\u003cp\u003eYes. Combining front, middle and rear braces stiffens more of the chassis for an even tighter feel.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780056052024,"sku":"HR-Q0734","price":212.84,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0734_main.jpg?v=1678898711"},{"product_id":"hardrace-hardened-engines-mounts-4pc-set-mitsubishi-evo-7-9-5mt-01-09","title":"Hardrace Hardened Engine Mounts Mitsubishi Evo 7-9 5MT 01-09","description":"\u003ch2\u003eHardrace Hardened Engine Mount JDM 5MT for Mitsubishi Lancer CJ\/CS (1996-2008) – Less Engine Movement, Sharper Response\u003c\/h2\u003e\n\u003cp\u003eSoft factory mounts let the engine and gearbox rock under acceleration, braking and gear changes, which blunts throttle response, makes shifts vague and can cause wheel hop. This Hardrace hardened engine mount is a firmer upgrade that holds the drivetrain in place, so power goes down more cleanly and the car feels tighter and more responsive.\u003c\/p\u003e\n\u003cp\u003eOn the Lancer and Evo, firmer mounts help the drivetrain cope with hard launches and boost, cutting wheel hop and making shifts more positive.\u003c\/p\u003e\n\u003cp\u003eIt uses hardened rubber, a high-strength, anti-crack compound that is firmer than the factory rubber but still absorbs some vibration.\u003c\/p\u003e\n\u003cp\u003eIt suits the Mitsubishi Lancer CJ\/CS (1996-2008).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer than the factory mount\u003c\/li\u003e\n\u003cli\u003eLess engine and gearbox movement\u003c\/li\u003e\n\u003cli\u003eSharper throttle response and more precise gear changes\u003c\/li\u003e\n\u003cli\u003eHelps reduce wheel hop\u003c\/li\u003e\n\u003cli\u003eHardened rubber: firm but still absorbs vibration\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e4-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHardened engine mount (4 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMitsubishi \/ Lancer (6th Gen) 1996-2003 \/ Sedan (CJ) 1996-2003 \/ Lancer Evolution VII 2.0 Turbo 2001-2003\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution IX 2.0 Turbo (CT9A) 2005-2008\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution IX FQ-360 2.0 Turbo (CT9A) 2005-2008\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution VIII 2.0 Turbo (CT9A) 2004-2005\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution VIII FQ-400 2.0 Turbo (400HP\/294KW) 2004-2005\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e For JDM 5MT use only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the engine and gearbox with a jack or engine support bar before undoing any mount, and work on one mount at a time so the drivetrain stays aligned. Remove the factory mount and bolt the Hardrace mount in its place. Tighten all fixings to the vehicle manufacturer's torque figures. Expect a little more vibration than standard. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-front-side-engine-mount-1pc-set-mitsubishi-evo-7-9-03-08\"\u003eHardrace Hardened Front Side Engine Mount 1Pc Set Mitsubishi Evo 7-9 03-08\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-rear-engine-mount-1pc-set-mitsubishi-evo-7-9-usdm-03-07\"\u003eHardrace Hardened Rear Engine Mount 1Pc Set Mitsubishi Evo 7-9 USDM 03-07\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-right-side-engine-mount-1pc-set-mitsubishi-evo-7-9-03-08\"\u003eHardrace Hardened Right Side Engine Mount 1Pc Set Mitsubishi Evo 7-9 03-08\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill it increase vibration?\u003c\/h3\u003e\n\u003cp\u003eYes, a little. Firmer mounts pass more engine vibration into the cabin, especially at idle.\u003c\/p\u003e\n\u003ch3\u003eShould I upgrade all the mounts at once?\u003c\/h3\u003e\n\u003cp\u003eUpgrading the matching mounts together gives the most consistent result, but each mount can be fitted on its own.\u003c\/p\u003e\n\u003ch3\u003eDoes it suit manual or automatic cars?\u003c\/h3\u003e\n\u003cp\u003eHardrace lists it for manual models. Check the note in the Fitment section against your engine and gearbox before ordering.\u003c\/p\u003e\n\u003ch3\u003eDoes it come ready to fit?\u003c\/h3\u003e\n\u003cp\u003eYes. It is a complete mount, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780056150328,"sku":"HR-7672","price":487.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201551317121517x12u15mz.jpg?v=1678898713"},{"product_id":"hardrace-hardened-engines-mounts-4pc-set-mitsubishi-evo-7-9-6mt-01-09","title":"Hardrace Hardened Engine Mounts Mitsubishi Evo 7-9 6MT 01-09","description":"\u003ch2\u003eHardrace Hardened Engine Mount JDM 6MT for Mitsubishi Lancer CS (2003-2008) – Less Engine Movement, Sharper Response\u003c\/h2\u003e\n\u003cp\u003eSoft factory mounts let the engine and gearbox rock under acceleration, braking and gear changes, which blunts throttle response, makes shifts vague and can cause wheel hop. This Hardrace hardened engine mount is a firmer upgrade that holds the drivetrain in place, so power goes down more cleanly and the car feels tighter and more responsive.\u003c\/p\u003e\n\u003cp\u003eOn the Lancer and Evo, firmer mounts help the drivetrain cope with hard launches and boost, cutting wheel hop and making shifts more positive.\u003c\/p\u003e\n\u003cp\u003eIt uses hardened rubber, a high-strength, anti-crack compound that is firmer than the factory rubber but still absorbs some vibration.\u003c\/p\u003e\n\u003cp\u003eIt suits the Mitsubishi Lancer CS (2003-2008).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer than the factory mount\u003c\/li\u003e\n\u003cli\u003eLess engine and gearbox movement\u003c\/li\u003e\n\u003cli\u003eSharper throttle response and more precise gear changes\u003c\/li\u003e\n\u003cli\u003eHelps reduce wheel hop\u003c\/li\u003e\n\u003cli\u003eHardened rubber: firm but still absorbs vibration\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e4-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHardened engine mount (4 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution IX 2.0 Turbo (CT9A) 2005-2008\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution IX FQ-360 2.0 Turbo (CT9A) 2005-2008\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution VIII 2.0 Turbo (CT9A) 2004-2005\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution VIII FQ-400 2.0 Turbo (400HP\/294KW) 2004-2005\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e For JDM 6MT use only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the engine and gearbox with a jack or engine support bar before undoing any mount, and work on one mount at a time so the drivetrain stays aligned. Remove the factory mount and bolt the Hardrace mount in its place. Tighten all fixings to the vehicle manufacturer's torque figures. Expect a little more vibration than standard. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-front-side-engine-mount-1pc-set-mitsubishi-evo-7-9-03-08\"\u003eHardrace Hardened Front Side Engine Mount 1Pc Set Mitsubishi Evo 7-9 03-08\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-rear-engine-mount-1pc-set-mitsubishi-evo-7-9-usdm-03-07\"\u003eHardrace Hardened Rear Engine Mount 1Pc Set Mitsubishi Evo 7-9 USDM 03-07\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-right-side-engine-mount-1pc-set-mitsubishi-evo-7-9-03-08\"\u003eHardrace Hardened Right Side Engine Mount 1Pc Set Mitsubishi Evo 7-9 03-08\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill it increase vibration?\u003c\/h3\u003e\n\u003cp\u003eYes, a little. Firmer mounts pass more engine vibration into the cabin, especially at idle.\u003c\/p\u003e\n\u003ch3\u003eShould I upgrade all the mounts at once?\u003c\/h3\u003e\n\u003cp\u003eUpgrading the matching mounts together gives the most consistent result, but each mount can be fitted on its own.\u003c\/p\u003e\n\u003ch3\u003eDoes it suit manual or automatic cars?\u003c\/h3\u003e\n\u003cp\u003eHardrace lists it for manual models. Check the note in the Fitment section against your engine and gearbox before ordering.\u003c\/p\u003e\n\u003ch3\u003eDoes it come ready to fit?\u003c\/h3\u003e\n\u003cp\u003eYes. It is a complete mount, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780056183096,"sku":"HR-7671","price":532.08,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20151127830178n30b17mk.jpg?v=1678898715"},{"product_id":"hardrace-hardened-front-side-engine-mount-1pc-set-mitsubishi-evo-7-9-03-08","title":"Hardrace Hardened Front Side Engine Mount Mitsubishi Evo 7-9 03-08","description":"\u003ch2\u003eHardrace Hardened Front Engine Mount for Mitsubishi Lancer CJ\/CS (1996-2008) – Less Engine Movement, Sharper Response\u003c\/h2\u003e\n\u003cp\u003eSoft factory mounts let the engine and gearbox rock under acceleration, braking and gear changes, which blunts throttle response, makes shifts vague and can cause wheel hop. This Hardrace hardened front engine mount is a firmer upgrade that holds the drivetrain in place, so power goes down more cleanly and the car feels tighter and more responsive.\u003c\/p\u003e\n\u003cp\u003eOn the Lancer and Evo, firmer mounts help the drivetrain cope with hard launches and boost, cutting wheel hop and making shifts more positive.\u003c\/p\u003e\n\u003cp\u003eIt uses hardened rubber, a high-strength, anti-crack compound that is firmer than the factory rubber but still absorbs some vibration.\u003c\/p\u003e\n\u003cp\u003eIt suits the Mitsubishi Lancer CJ\/CS (1996-2008).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer than the factory mount\u003c\/li\u003e\n\u003cli\u003eLess engine and gearbox movement\u003c\/li\u003e\n\u003cli\u003eSharper throttle response and more precise gear changes\u003c\/li\u003e\n\u003cli\u003eHelps reduce wheel hop\u003c\/li\u003e\n\u003cli\u003eHardened rubber: firm but still absorbs vibration\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHardened front engine mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMitsubishi \/ Lancer (6th Gen) 1996-2003 \/ Sedan (CJ) 1996-2003 \/ Lancer Evolution VII 2.0 Turbo 2001-2003\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution IX 2.0 Turbo (CT9A) 2005-2008\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution IX FQ-360 2.0 Turbo (CT9A) 2005-2008\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution VIII 2.0 Turbo (CT9A) 2004-2005\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution VIII FQ-400 2.0 Turbo (400HP\/294KW) 2004-2005\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the engine and gearbox with a jack or engine support bar before undoing any mount, and work on one mount at a time so the drivetrain stays aligned. Remove the factory mount and bolt the Hardrace mount in its place. Tighten all fixings to the vehicle manufacturer's torque figures. Expect a little more vibration than standard. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-rear-engine-mount-1pc-set-mitsubishi-evo-7-9-usdm-03-07\"\u003eHardrace Hardened Rear Engine Mount 1Pc Set Mitsubishi Evo 7-9 USDM 03-07\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-right-side-engine-mount-1pc-set-mitsubishi-evo-7-9-03-08\"\u003eHardrace Hardened Right Side Engine Mount 1Pc Set Mitsubishi Evo 7-9 03-08\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-left-side-engine-mount-1pc-set-mitsubishi-evo-7-9-5-speed-03-08\"\u003eHardrace Hardened Left Side Engine Mount 1Pc Set Mitsubishi Evo 7-9 5 Speed 03-08\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill it increase vibration?\u003c\/h3\u003e\n\u003cp\u003eYes, a little. Firmer mounts pass more engine vibration into the cabin, especially at idle.\u003c\/p\u003e\n\u003ch3\u003eShould I upgrade all the mounts at once?\u003c\/h3\u003e\n\u003cp\u003eUpgrading the matching mounts together gives the most consistent result, but each mount can be fitted on its own.\u003c\/p\u003e\n\u003ch3\u003eDoes it come ready to fit?\u003c\/h3\u003e\n\u003cp\u003eYes. It is a complete mount, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780056215864,"sku":"HR-7347","price":88.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20151127840328b40l32jr.jpg?v=1678898715"},{"product_id":"hardrace-hardened-left-side-engine-mount-1pc-set-mitsubishi-evo-7-9-6-speed-03-08","title":"Hardrace Hardened Left Side Engine Mount Mitsubishi Evo 7-9 6 Speed 03-08","description":"\u003ch2\u003eHardrace Hardened Left Side Engine Mount 6MT for Mitsubishi Lancer CJ\/CS (1996-2008) – Less Engine Movement, Sharper Response\u003c\/h2\u003e\n\u003cp\u003eSoft factory mounts let the engine and gearbox rock under acceleration, braking and gear changes, which blunts throttle response, makes shifts vague and can cause wheel hop. This Hardrace hardened left side engine mount is a firmer upgrade that holds the drivetrain in place, so power goes down more cleanly and the car feels tighter and more responsive.\u003c\/p\u003e\n\u003cp\u003eOn the Lancer and Evo, firmer mounts help the drivetrain cope with hard launches and boost, cutting wheel hop and making shifts more positive.\u003c\/p\u003e\n\u003cp\u003eIt uses hardened rubber, a high-strength, anti-crack compound that is firmer than the factory rubber but still absorbs some vibration.\u003c\/p\u003e\n\u003cp\u003eIt suits the Mitsubishi Lancer CJ\/CS (1996-2008).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer than the factory mount\u003c\/li\u003e\n\u003cli\u003eLess engine and gearbox movement\u003c\/li\u003e\n\u003cli\u003eSharper throttle response and more precise gear changes\u003c\/li\u003e\n\u003cli\u003eHelps reduce wheel hop\u003c\/li\u003e\n\u003cli\u003eHardened rubber: firm but still absorbs vibration\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHardened left side engine mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMitsubishi \/ Lancer (6th Gen) 1996-2003 \/ Sedan (CJ) 1996-2003 \/ Lancer Evolution VII 2.0 Turbo 2001-2003\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution IX 2.0 Turbo (CT9A) 2005-2008\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution IX FQ-360 2.0 Turbo (CT9A) 2005-2008\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution VIII 2.0 Turbo (CT9A) 2004-2005\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution VIII FQ-400 2.0 Turbo (400HP\/294KW) 2004-2005\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e 1 pc\/setfits oe: mn100000; For 6 MT use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the engine and gearbox with a jack or engine support bar before undoing any mount, and work on one mount at a time so the drivetrain stays aligned. Remove the factory mount and bolt the Hardrace mount in its place. Tighten all fixings to the vehicle manufacturer's torque figures. Expect a little more vibration than standard. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-front-side-engine-mount-1pc-set-mitsubishi-evo-7-9-03-08\"\u003eHardrace Hardened Front Side Engine Mount 1Pc Set Mitsubishi Evo 7-9 03-08\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-rear-engine-mount-1pc-set-mitsubishi-evo-7-9-usdm-03-07\"\u003eHardrace Hardened Rear Engine Mount 1Pc Set Mitsubishi Evo 7-9 USDM 03-07\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-right-side-engine-mount-1pc-set-mitsubishi-evo-7-9-03-08\"\u003eHardrace Hardened Right Side Engine Mount 1Pc Set Mitsubishi Evo 7-9 03-08\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill it increase vibration?\u003c\/h3\u003e\n\u003cp\u003eYes, a little. Firmer mounts pass more engine vibration into the cabin, especially at idle.\u003c\/p\u003e\n\u003ch3\u003eShould I upgrade all the mounts at once?\u003c\/h3\u003e\n\u003cp\u003eUpgrading the matching mounts together gives the most consistent result, but each mount can be fitted on its own.\u003c\/p\u003e\n\u003ch3\u003eDoes it suit manual or automatic cars?\u003c\/h3\u003e\n\u003cp\u003eHardrace lists it for manual models. Check the note in the Fitment section against your engine and gearbox before ordering.\u003c\/p\u003e\n\u003ch3\u003eDoes it come ready to fit?\u003c\/h3\u003e\n\u003cp\u003eYes. It is a complete mount, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780056281400,"sku":"HR-7350","price":221.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/2015112795559u5x55zu.jpg?v=1678898717"},{"product_id":"hardrace-hardened-rubber-reinforced-engine-mount-bushes-4pc-set-mitsubishi-evo-1-3-92-96","title":"Hardrace Rubber Reinforced Engine Mount Bushes Mitsubishi Evo 1-3 92-96","description":"\u003ch2\u003eHardrace Reinforced Mount Bushes Hardened Rubber for Mitsubishi Lancer CB (1992-1996) – Firmer Mounting, Less Wheel Hop\u003c\/h2\u003e\n\u003cp\u003eSoft factory mount bushes let the subframe or differential move under load, which causes clunks, wheel hop and vague handling. These Hardrace reinforced mount bushes are a firmer upgrade that holds everything in place, for more direct power delivery and a tighter feel.\u003c\/p\u003e\n\u003cp\u003eThe Lancer and Evo chassis responds well to firmer bushes, giving a more precise feel and more consistent grip when driven hard.\u003c\/p\u003e\n\u003cp\u003eThey are made from hardened rubber, a high-strength, anti-crack compound that is firmer than the factory bushes but still absorbs vibration.\u003c\/p\u003e\n\u003cp\u003eIt suits the Mitsubishi Lancer CB (1992-1996).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHolds the subframe or differential firmly\u003c\/li\u003e\n\u003cli\u003eLess wheel hop and clunking\u003c\/li\u003e\n\u003cli\u003eHardened rubber: firm but still absorbs vibration\u003c\/li\u003e\n\u003cli\u003e4-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReinforced mount bushes (4 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMitsubishi \/ Lancer (5th Gen) 1992-1996 \/ Sedan (CB) 1992-1996 \/ Lancer Evolution I 2.0 Turbo (CD9A) 1992-1994\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (5th Gen) 1992-1996 \/ Sedan (CB) 1992-1996 \/ Lancer Evolution II 2.0 Turbo (CE9A) 1994-1995\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (5th Gen) 1992-1996 \/ Sedan (CB) 1992-1996 \/ Lancer Evolution III 2.0 Turbo (CE9A) 1995-1996\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe bushes press into the factory parts, so the part needs removing from the car and a hydraulic press is needed to press the old bushes out and the new Hardrace bushes in. Refit the part and tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need a press?\u003c\/h3\u003e\n\u003cp\u003eYes. The old bushes must be pressed out and the new ones pressed in with a hydraulic press.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNot usually, but have it checked if the car feels different afterwards.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eOnly slightly. The hardened rubber is firmer than the factory bushes but still absorbs vibration, so it stays comfortable for everyday driving.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780056379704,"sku":"HR-6443","price":221.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20163291511115f11b1dn.jpg?v=1678898720"},{"product_id":"hardrace-race-series-hardened-rear-engine-mount-1pc-set-mitsubishi-evo-x-07-16","title":"Hardrace Race Series Hardened Rear Engine Mount Mitsubishi Evo X 07-16","description":"\u003ch2\u003eHardrace Hardened Rear Engine Mount for Mitsubishi Lancer CY (2007-2017) – Less Engine Movement, Sharper Response\u003c\/h2\u003e\n\u003cp\u003eSoft factory mounts let the engine and gearbox rock under acceleration, braking and gear changes, which blunts throttle response, makes shifts vague and can cause wheel hop. This Hardrace hardened rear engine mount is a firmer upgrade that holds the drivetrain in place, so power goes down more cleanly and the car feels tighter and more responsive.\u003c\/p\u003e\n\u003cp\u003eOn the Lancer and Evo, firmer mounts help the drivetrain cope with hard launches and boost, cutting wheel hop and making shifts more positive.\u003c\/p\u003e\n\u003cp\u003eIt uses hardened rubber, a high-strength, anti-crack compound that is firmer than the factory rubber but still absorbs some vibration.\u003c\/p\u003e\n\u003cp\u003eIt suits the Mitsubishi Lancer CY (2007-2017).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer than the factory mount\u003c\/li\u003e\n\u003cli\u003eLess engine and gearbox movement\u003c\/li\u003e\n\u003cli\u003eSharper throttle response and more precise gear changes\u003c\/li\u003e\n\u003cli\u003eHelps reduce wheel hop\u003c\/li\u003e\n\u003cli\u003eHardened rubber: firm but still absorbs vibration\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHardened rear engine mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMitsubishi \/ Lancer (8th Gen) 2007-2017 \/ Sedan (CY) 2007-2017 \/ Lancer Evolution X 2.0 Turbo (CZ4A) 2008-2016\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the engine and gearbox with a jack or engine support bar before undoing any mount, and work on one mount at a time so the drivetrain stays aligned. Remove the factory mount and bolt the Hardrace mount in its place. Tighten all fixings to the vehicle manufacturer's torque figures. Expect a little more vibration than standard. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-race-series-hardened-front-side-engine-mount-1pc-set-mitsubishi-evo-10-09\"\u003eHardrace Race Series Hardened Front Side Engine Mount 1Pc Set Mitsubishi Evo 10 09-16\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-race-series-hardened-left-side-engine-mount-mitsubishi-lancer-fortis-galant-07-12\"\u003eHardrace Race Series Hardened Left Side Engine Mount Mitsubishi Lancer Fortis Galant 07-12\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill it increase vibration?\u003c\/h3\u003e\n\u003cp\u003eYes, a little. Firmer mounts pass more engine vibration into the cabin, especially at idle.\u003c\/p\u003e\n\u003ch3\u003eShould I upgrade all the mounts at once?\u003c\/h3\u003e\n\u003cp\u003eUpgrading the matching mounts together gives the most consistent result, but each mount can be fitted on its own.\u003c\/p\u003e\n\u003ch3\u003eDoes it come ready to fit?\u003c\/h3\u003e\n\u003cp\u003eYes. It is a complete mount, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780056445240,"sku":"HR-8718","price":177.36,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/2016821544315g44m3dq.jpg?v=1678898721"},{"product_id":"hardrace-pillow-ball-front-lower-arm-rear-bush-mitsubishi-evo-7-8-9-01-08","title":"Hardrace Pillow Ball Front Lower Arm Rear Bush Mitsubishi Evo 7 8 9 01-08","description":"\u003ch2\u003eHardrace Front Lower Arm Bushes Pillow Ball for Mitsubishi Lancer CJ\/CS (1996-2008) – Firmer Location, Sharper Handling\u003c\/h2\u003e\n\u003cp\u003eFactory suspension bushes are built for comfort, so they flex under cornering, braking and acceleration and let the suspension move around. These Hardrace front lower arm bushes are a firmer upgrade that fits into the factory parts, so the suspension is located more precisely and the car feels sharper and more consistent.\u003c\/p\u003e\n\u003cp\u003eThe Lancer and Evo chassis responds well to firmer bushes, giving a more precise feel and more consistent grip when driven hard.\u003c\/p\u003e\n\u003cp\u003eThey use pillow ball (spherical) joints, which give precise, direct feedback with no rubber deflection. The offset design lets you adjust the geometry, adding caster for more stable steering.\u003c\/p\u003e\n\u003cp\u003eIt suits the Mitsubishi Lancer CJ\/CS (1996-2008).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer than the factory bushes\u003c\/li\u003e\n\u003cli\u003eSharper, more consistent handling\u003c\/li\u003e\n\u003cli\u003ePillow ball joints for zero deflection\u003c\/li\u003e\n\u003cli\u003eOffset design for geometry adjustment\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront lower arm bushes (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMitsubishi \/ Lancer (6th Gen) 1996-2003 \/ Sedan (CJ) 1996-2003 \/ Lancer Evolution VII 2.0 Turbo 2001-2003\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution IX 2.0 Turbo (CT9A) 2005-2008\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution IX FQ-360 2.0 Turbo (CT9A) 2005-2008\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution VIII 2.0 Turbo (CT9A) 2004-2005\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution VIII FQ-400 2.0 Turbo (400HP\/294KW) 2004-2005\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe bushes press into the factory parts, so the part needs removing from the car and a hydraulic press is needed to press the old bushes out and the new Hardrace bushes in. Refit the part and tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-24mm-tpv-front-stabilizer-bushes-2pc-set-mitsubishi-7-9-03-07\"\u003eHardrace Hardened 24mm TPV Front Stabilizer Bushes 2Pc Set Mitsubishi 7-9 03-07\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-spherical-bearings-front-lower-arm-front-side-small-bushes-2pc-set-mitsubishi-evo-7-9-03-07\"\u003eHardrace Spherical Bearings Front Lower Arm Front Side Small Bushes 2Pc Set Mitsubishi Evo\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-rubber-rear-diff-support-bushes-2pc-set-mitsubishi-evo-4-9-96-07\"\u003eHardrace Hardened Rubber Rear Diff Support Bushes 2Pc Set Mitsubishi Evo 4-9 96-07\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need a press?\u003c\/h3\u003e\n\u003cp\u003eYes. The old bushes must be pressed out and the new ones pressed in with a hydraulic press.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes, have a full four-wheel alignment done after fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003ePillow ball joints pass on a little more noise and vibration than rubber, but there is no rubber flex, so the handling is far more precise.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780056969528,"sku":"HR-Q0284","price":279.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201852313595213p59a52zu.jpg?v=1678898734"},{"product_id":"hardrace-spherical-bearings-front-lower-arm-front-side-small-bushes-2pc-set-mitsubishi-evo-7-9-03-07","title":"Hardrace Front Lower Arm Front Bushes Spherical Mitsubishi Evo 7-X 01-16","description":"\u003ch2\u003eHardrace Front Lower Arm Bushes Pillow Ball for Mitsubishi Lancer CJ\/CS\/CY (1996-2017) – Firmer Location, Sharper Handling\u003c\/h2\u003e\n\u003cp\u003eFactory suspension bushes are built for comfort, so they flex under cornering, braking and acceleration and let the suspension move around. These Hardrace front lower arm bushes are a firmer upgrade that fits into the factory parts, so the suspension is located more precisely and the car feels sharper and more consistent.\u003c\/p\u003e\n\u003cp\u003eThe Lancer and Evo chassis responds well to firmer bushes, giving a more precise feel and more consistent grip when driven hard.\u003c\/p\u003e\n\u003cp\u003eThey use pillow ball (spherical) joints, which give precise, direct feedback with no rubber deflection.\u003c\/p\u003e\n\u003cp\u003eIt suits the Mitsubishi Lancer CJ\/CS\/CY (1996-2017).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer than the factory bushes\u003c\/li\u003e\n\u003cli\u003eSharper, more consistent handling\u003c\/li\u003e\n\u003cli\u003ePillow ball joints for zero deflection\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront lower arm bushes (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMitsubishi \/ Lancer (6th Gen) 1996-2003 \/ Sedan (CJ) 1996-2003 \/ Lancer Evolution VII 2.0 Turbo 2001-2003\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution IX 2.0 Turbo (CT9A) 2005-2008\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution IX FQ-360 2.0 Turbo (CT9A) 2005-2008\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution VIII 2.0 Turbo (CT9A) 2004-2005\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution VIII FQ-400 2.0 Turbo (400HP\/294KW) 2004-2005\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (8th Gen) 2007-2017 \/ Sedan (CY) 2007-2017 \/ Lancer Evolution X 2.0 Turbo (CZ4A) 2008-2016\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe bushes press into the factory parts, so the part needs removing from the car and a hydraulic press is needed to press the old bushes out and the new Hardrace bushes in. Refit the part and tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-24mm-tpv-front-stabilizer-bushes-2pc-set-mitsubishi-7-9-03-07\"\u003eHardrace Hardened 24mm TPV Front Stabilizer Bushes 2Pc Set Mitsubishi 7-9 03-07\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-rubber-rear-diff-support-bushes-2pc-set-mitsubishi-evo-4-9-96-07\"\u003eHardrace Hardened Rubber Rear Diff Support Bushes 2Pc Set Mitsubishi Evo 4-9 96-07\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-rubber-rear-diff-support-arm-bushes-2pc-set-mitsubishi-evo-96-07\"\u003eHardrace Hardened Rubber Rear Diff Support Arm Bushes 2Pc Set Mitsubishi Evo 96-07\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need a press?\u003c\/h3\u003e\n\u003cp\u003eYes. The old bushes must be pressed out and the new ones pressed in with a hydraulic press.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes, have a full four-wheel alignment done after fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003ePillow ball joints pass on a little more noise and vibration than rubber, but there is no rubber flex, so the handling is far more precise.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780057067832,"sku":"HR-6746-B","price":119.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201612810193410i19g34zt.jpg?v=1678898736"},{"product_id":"hardrace-spherical-bearings-front-lower-arm-rear-side-big-bushes-2pc-set-mitsubishi-evo-7-9-03-07","title":"Hardrace Front Lower Arm Rear Bushes Spherical Mitsubishi Evo 7 8 9 01-07","description":"\u003ch2\u003eHardrace Front Lower Arm Bushes Pillow Ball for Mitsubishi Lancer CJ\/CS (1996-2008) – Firmer Location, Sharper Handling\u003c\/h2\u003e\n\u003cp\u003eFactory suspension bushes are built for comfort, so they flex under cornering, braking and acceleration and let the suspension move around. These Hardrace front lower arm bushes are a firmer upgrade that fits into the factory parts, so the suspension is located more precisely and the car feels sharper and more consistent.\u003c\/p\u003e\n\u003cp\u003eThe Lancer and Evo chassis responds well to firmer bushes, giving a more precise feel and more consistent grip when driven hard.\u003c\/p\u003e\n\u003cp\u003eThey use pillow ball (spherical) joints, which give precise, direct feedback with no rubber deflection.\u003c\/p\u003e\n\u003cp\u003eIt suits the Mitsubishi Lancer CJ\/CS (1996-2008).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer than the factory bushes\u003c\/li\u003e\n\u003cli\u003eSharper, more consistent handling\u003c\/li\u003e\n\u003cli\u003ePillow ball joints for zero deflection\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront lower arm bushes (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMitsubishi \/ Lancer (6th Gen) 1996-2003 \/ Sedan (CJ) 1996-2003 \/ Lancer Evolution VII 2.0 Turbo 2001-2003\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution IX 2.0 Turbo (CT9A) 2005-2008\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution IX FQ-360 2.0 Turbo (CT9A) 2005-2008\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution VIII 2.0 Turbo (CT9A) 2004-2005\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution VIII FQ-400 2.0 Turbo (400HP\/294KW) 2004-2005\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe bushes press into the factory parts, so the part needs removing from the car and a hydraulic press is needed to press the old bushes out and the new Hardrace bushes in. Refit the part and tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-24mm-tpv-front-stabilizer-bushes-2pc-set-mitsubishi-7-9-03-07\"\u003eHardrace Hardened 24mm TPV Front Stabilizer Bushes 2Pc Set Mitsubishi 7-9 03-07\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-spherical-bearings-front-lower-arm-front-side-small-bushes-2pc-set-mitsubishi-evo-7-9-03-07\"\u003eHardrace Spherical Bearings Front Lower Arm Front Side Small Bushes 2Pc Set Mitsubishi Evo\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-rubber-rear-diff-support-bushes-2pc-set-mitsubishi-evo-4-9-96-07\"\u003eHardrace Hardened Rubber Rear Diff Support Bushes 2Pc Set Mitsubishi Evo 4-9 96-07\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need a press?\u003c\/h3\u003e\n\u003cp\u003eYes. The old bushes must be pressed out and the new ones pressed in with a hydraulic press.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes, have a full four-wheel alignment done after fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003ePillow ball joints pass on a little more noise and vibration than rubber, but there is no rubber flex, so the handling is far more precise.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780057100600,"sku":"HR-6746-A","price":279.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201612810142410h14w24kj.jpg?v=1678898736"},{"product_id":"hardrace-spherical-bearings-rear-lower-arm-bush-aluminium-body-6pc-set-mitsubishi-evo-4-9-96-07","title":"Hardrace Spherical Rear Lower Arm Bush Aluminium Body Mitsubishi 96-07","description":"\u003ch2\u003eHardrace Rear Lower Arm Bushes Solid Aluminium for Mitsubishi Lancer CJ\/CS (1996-2008) – Firmer Location, Sharper Handling\u003c\/h2\u003e\n\u003cp\u003eFactory suspension bushes are built for comfort, so they flex under cornering, braking and acceleration and let the suspension move around. These Hardrace rear lower arm bushes are a firmer upgrade that fits into the factory parts, so the suspension is located more precisely and the car feels sharper and more consistent.\u003c\/p\u003e\n\u003cp\u003eThe Lancer and Evo chassis responds well to firmer bushes, giving a more precise feel and more consistent grip when driven hard.\u003c\/p\u003e\n\u003cp\u003eThey are machined from solid aluminium for zero deflection, so they are best suited to track and competition cars.\u003c\/p\u003e\n\u003cp\u003eIt suits the Mitsubishi Lancer CJ\/CS (1996-2008).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer than the factory bushes\u003c\/li\u003e\n\u003cli\u003eSharper, more consistent handling\u003c\/li\u003e\n\u003cli\u003eSolid aluminium for zero deflection\u003c\/li\u003e\n\u003cli\u003e6-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear lower arm bushes (6 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMitsubishi \/ Lancer (6th Gen) 1996-2003 \/ Sedan (CJ) 1996-2003 \/ Lancer Evolution IV 2.0 Turbo (w\/ 15\" Wheels) 1996-1998\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (6th Gen) 1996-2003 \/ Sedan (CJ) 1996-2003 \/ Lancer Evolution IV 2.0 Turbo 1996-1998\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (6th Gen) 1996-2003 \/ Sedan (CJ) 1996-2003 \/ Lancer Evolution V 2.0 Turbo (w\/ 15\" Wheels) 1998-1999\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (6th Gen) 1996-2003 \/ Sedan (CJ) 1996-2003 \/ Lancer Evolution V GSR 2.0 Turbo 1998-1999\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (6th Gen) 1996-2003 \/ Sedan (CJ) 1996-2003 \/ Lancer Evolution V RS 2.0 Turbo 1998-1999\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (6th Gen) 1996-2003 \/ Sedan (CJ) 1996-2003 \/ Lancer Evolution VI 2.0 Turbo (w\/ 15\" Wheels) 1999-2001\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (6th Gen) 1996-2003 \/ Sedan (CJ) 1996-2003 \/ Lancer Evolution VI 2.0 Turbo 1999-2001\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (6th Gen) 1996-2003 \/ Sedan (CJ) 1996-2003 \/ Lancer Evolution VII 2.0 Turbo 2001-2003\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution IX 2.0 Turbo (CT9A) 2005-2008\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution IX FQ-360 2.0 Turbo (CT9A) 2005-2008\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution VIII 2.0 Turbo (CT9A) 2004-2005\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution VIII FQ-400 2.0 Turbo (400HP\/294KW) 2004-2005\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e For Aluminum Body Use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe bushes press into the factory parts, so the part needs removing from the car and a hydraulic press is needed to press the old bushes out and the new Hardrace bushes in. Refit the part and tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-24mm-tpv-front-stabilizer-bushes-2pc-set-mitsubishi-7-9-03-07\"\u003eHardrace Hardened 24mm TPV Front Stabilizer Bushes 2Pc Set Mitsubishi 7-9 03-07\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-spherical-bearings-front-lower-arm-front-side-small-bushes-2pc-set-mitsubishi-evo-7-9-03-07\"\u003eHardrace Spherical Bearings Front Lower Arm Front Side Small Bushes 2Pc Set Mitsubishi Evo\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-rubber-rear-diff-support-bushes-2pc-set-mitsubishi-evo-4-9-96-07\"\u003eHardrace Hardened Rubber Rear Diff Support Bushes 2Pc Set Mitsubishi Evo 4-9 96-07\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need a press?\u003c\/h3\u003e\n\u003cp\u003eYes. The old bushes must be pressed out and the new ones pressed in with a hydraulic press.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes, have a full four-wheel alignment done after fitting.\u003c\/p\u003e\n\u003ch3\u003eIs it suitable for a road car?\u003c\/h3\u003e\n\u003cp\u003eSolid aluminium bushes pass on a lot of noise and vibration, so they are best suited to track and competition cars.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780057395512,"sku":"HR-6678F","price":319.26,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/2017112014304614k30x46hx.jpg?v=1678898738"},{"product_id":"hardrace-spherical-bearings-steel-body-rear-lower-arm-bushes-6pc-set-mistubishi-evo-4-9-96-07","title":"Hardrace Steel Rear Lower Arm Bushes Spherical Mitsubishi Evo 4-9 96-07","description":"\u003ch2\u003eHardrace Rear Lower Arm Bushes Pillow Ball for Mitsubishi Lancer CJ\/CS (1996-2008) – Firmer Location, Sharper Handling\u003c\/h2\u003e\n\u003cp\u003eFactory suspension bushes are built for comfort, so they flex under cornering, braking and acceleration and let the suspension move around. These Hardrace rear lower arm bushes are a firmer upgrade that fits into the factory parts, so the suspension is located more precisely and the car feels sharper and more consistent.\u003c\/p\u003e\n\u003cp\u003eThe Lancer and Evo chassis responds well to firmer bushes, giving a more precise feel and more consistent grip when driven hard.\u003c\/p\u003e\n\u003cp\u003eThey use pillow ball (spherical) joints, which give precise, direct feedback with no rubber deflection.\u003c\/p\u003e\n\u003cp\u003eIt suits the Mitsubishi Lancer CJ\/CS (1996-2008).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer than the factory bushes\u003c\/li\u003e\n\u003cli\u003eSharper, more consistent handling\u003c\/li\u003e\n\u003cli\u003ePillow ball joints for zero deflection\u003c\/li\u003e\n\u003cli\u003e6-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear lower arm bushes (6 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMitsubishi \/ Lancer (6th Gen) 1996-2003 \/ Sedan (CJ) 1996-2003 \/ Lancer Evolution IV 2.0 Turbo (w\/ 15\" Wheels) 1996-1998\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (6th Gen) 1996-2003 \/ Sedan (CJ) 1996-2003 \/ Lancer Evolution IV 2.0 Turbo 1996-1998\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (6th Gen) 1996-2003 \/ Sedan (CJ) 1996-2003 \/ Lancer Evolution V 2.0 Turbo (w\/ 15\" Wheels) 1998-1999\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (6th Gen) 1996-2003 \/ Sedan (CJ) 1996-2003 \/ Lancer Evolution V GSR 2.0 Turbo 1998-1999\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (6th Gen) 1996-2003 \/ Sedan (CJ) 1996-2003 \/ Lancer Evolution V RS 2.0 Turbo 1998-1999\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (6th Gen) 1996-2003 \/ Sedan (CJ) 1996-2003 \/ Lancer Evolution VI 2.0 Turbo (w\/ 15\" Wheels) 1999-2001\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (6th Gen) 1996-2003 \/ Sedan (CJ) 1996-2003 \/ Lancer Evolution VI 2.0 Turbo 1999-2001\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (6th Gen) 1996-2003 \/ Sedan (CJ) 1996-2003 \/ Lancer Evolution VII 2.0 Turbo 2001-2003\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution IX 2.0 Turbo (CT9A) 2005-2008\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution IX FQ-360 2.0 Turbo (CT9A) 2005-2008\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution VIII 2.0 Turbo (CT9A) 2004-2005\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution VIII FQ-400 2.0 Turbo (400HP\/294KW) 2004-2005\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e For Steel Body Use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe bushes press into the factory parts, so the part needs removing from the car and a hydraulic press is needed to press the old bushes out and the new Hardrace bushes in. Refit the part and tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-24mm-tpv-front-stabilizer-bushes-2pc-set-mitsubishi-7-9-03-07\"\u003eHardrace Hardened 24mm TPV Front Stabilizer Bushes 2Pc Set Mitsubishi 7-9 03-07\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-spherical-bearings-front-lower-arm-front-side-small-bushes-2pc-set-mitsubishi-evo-7-9-03-07\"\u003eHardrace Spherical Bearings Front Lower Arm Front Side Small Bushes 2Pc Set Mitsubishi Evo\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-rubber-rear-diff-support-bushes-2pc-set-mitsubishi-evo-4-9-96-07\"\u003eHardrace Hardened Rubber Rear Diff Support Bushes 2Pc Set Mitsubishi Evo 4-9 96-07\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need a press?\u003c\/h3\u003e\n\u003cp\u003eYes. The old bushes must be pressed out and the new ones pressed in with a hydraulic press.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes, have a full four-wheel alignment done after fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003ePillow ball joints pass on a little more noise and vibration than rubber, but there is no rubber flex, so the handling is far more precise.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780057493816,"sku":"HR-6658F","price":319.26,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201711201431514x31y5ql.jpg?v=1678898740"},{"product_id":"hardrace-mitsubishi-lancer-evolution-4-6-front-roll-center-adjuster-increase-15mm-2pcs-set","title":"Hardrace Mitsubishi Lancer Evolution 4-6 Front Roll Centre Adjuster 96-01","description":"\u003ch2\u003eHardrace Front Roll Centre Adjuster for Mitsubishi Lancer CJ (1996-2003) – Restores Roll Centre, Sharper Turn-In\u003c\/h2\u003e\n\u003cp\u003eLowering a car drops the lower arms below their ideal angle, which lowers the roll centre and adds body roll and bump steer. This Hardrace front roll centre adjuster lowers the ball joint by 15mm to bring the arm geometry back, restoring the roll centre for sharper turn-in, less roll and less bump steer.\u003c\/p\u003e\n\u003cp\u003eIt suits the Mitsubishi Lancer CJ (1996-2003).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRestores the roll centre on lowered cars\u003c\/li\u003e\n\u003cli\u003eLess body roll and bump steer\u003c\/li\u003e\n\u003cli\u003eSharper turn-in\u003c\/li\u003e\n\u003cli\u003e15mm roll centre correction\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront roll centre adjuster (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMitsubishi \/ Lancer (6th Gen) 1996-2003 \/ Sedan (CJ) 1996-2003 \/ Lancer Evolution IV 2.0 Turbo (w\/ 15\" Wheels) 1996-1998\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (6th Gen) 1996-2003 \/ Sedan (CJ) 1996-2003 \/ Lancer Evolution IV 2.0 Turbo 1996-1998\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (6th Gen) 1996-2003 \/ Sedan (CJ) 1996-2003 \/ Lancer Evolution V 2.0 Turbo (w\/ 15\" Wheels) 1998-1999\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (6th Gen) 1996-2003 \/ Sedan (CJ) 1996-2003 \/ Lancer Evolution V GSR 2.0 Turbo 1998-1999\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (6th Gen) 1996-2003 \/ Sedan (CJ) 1996-2003 \/ Lancer Evolution V RS 2.0 Turbo 1998-1999\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (6th Gen) 1996-2003 \/ Sedan (CJ) 1996-2003 \/ Lancer Evolution VI 2.0 Turbo (w\/ 15\" Wheels) 1999-2001\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (6th Gen) 1996-2003 \/ Sedan (CJ) 1996-2003 \/ Lancer Evolution VI 2.0 Turbo 1999-2001\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e EVO6: For TME GSR \u0026amp; TME RS2 only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely and remove the wheel. Separate the ball joint from the hub with a proper ball joint splitter, remove the factory part and fit the Hardrace part in its place. Depending on the car, a pressed-in joint may need a press or ball joint tool. Tighten all fixings to the vehicle manufacturer's torque figures and fit new split pins where used. Have a full alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes, have a full alignment done after fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need it if my car is only slightly lowered?\u003c\/h3\u003e\n\u003cp\u003eThe more a car is lowered, the bigger the benefit. Roll centre adjusters make the most difference on cars lowered by around 30mm or more.\u003c\/p\u003e\n\u003ch3\u003eWill it clear my wheels?\u003c\/h3\u003e\n\u003cp\u003eCheck the notes in the Fitment section. Taller adjusters can need larger wheels to clear the hub.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780057526584,"sku":"HR-6793","price":239.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/6793_main.jpg?v=1679390166"},{"product_id":"hardrace-reinforced-rear-drop-links-2pc-set-mitsubishi-evo-x-9","title":"Hardrace Reinforced Rear Drop Links Mitsubishi Evo X 9-16 07-16","description":"\u003ch2\u003eHardrace Rear Reinforced Drop Links for Mitsubishi Lancer CY (2007-2017) – Quicker Anti-Roll Bar Response\u003c\/h2\u003e\n\u003cp\u003eDrop links connect the anti-roll bar to the suspension, so any play in them delays the bar's response and causes knocks over bumps. These Hardrace rear reinforced drop links are a stronger upgrade over the factory links, with sturdier construction that keeps the anti-roll bar working instantly and precisely, for flatter, more controlled cornering.\u003c\/p\u003e\n\u003cp\u003eOn the Evo and Impreza, precise drop links keep the anti-roll bars responding instantly through quick changes of direction.\u003c\/p\u003e\n\u003cp\u003eIt suits the Mitsubishi Lancer CY (2007-2017).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStronger than the factory drop links\u003c\/li\u003e\n\u003cli\u003eQuicker, more precise anti-roll bar response\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear reinforced drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMitsubishi \/ Lancer (8th Gen) 2007-2017 \/ Sedan (CY) 2007-2017 \/ Lancer Evolution X 2.0 Turbo (CZ4A) 2008-2016\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on a ramp or axle stands. Undo the drop link nuts, holding the ball joint studs with an Allen key or spanner so they don't spin, and swap the factory links for the Hardrace ones. Tighten to the vehicle manufacturer's torque figures with the car on its wheels, so the anti-roll bar isn't pre-loaded. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eAre they adjustable?\u003c\/h3\u003e\n\u003cp\u003eNo, they are a fixed-length upgrade. If your car is heavily lowered, adjustable Hardrace drop links let you correct the link angle.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780057624888,"sku":"HR-7037","price":115.22,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201512211591011v59b10ku.jpg?v=1678898743"},{"product_id":"hardrace-upgraded-rear-upper-arm-ball-joint-2pc-set-mitsubishi-evo-4-9-97-06","title":"Hardrace Upgraded Rear Upper Arm Ball Joint Mitsubishi Evo 4-9 97-06","description":"\u003ch2\u003eHardrace Rear Ball Joint for Mitsubishi Lancer CJ\/CS (1996-2008) – Uprated Joint, Tighter Steering\u003c\/h2\u003e\n\u003cp\u003eThe ball joints carry the suspension loads and let the hub steer and move, so any play shows up as vague steering and knocks. This Hardrace rear ball joint is an uprated joint built to the factory dimensions, so it fits exactly, with a stronger construction that keeps the front end tight and precise for longer.\u003c\/p\u003e\n\u003cp\u003eIt suits the Mitsubishi Lancer CJ\/CS (1996-2008).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUprated ball joint\u003c\/li\u003e\n\u003cli\u003eBuilt to factory dimensions for an exact fit\u003c\/li\u003e\n\u003cli\u003eStronger construction for tighter, more precise steering\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear ball joint (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMitsubishi \/ Lancer (6th Gen) 1996-2003 \/ Sedan (CJ) 1996-2003 \/ Lancer Evolution IV 2.0 Turbo (w\/ 15\" Wheels) 1996-1998\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (6th Gen) 1996-2003 \/ Sedan (CJ) 1996-2003 \/ Lancer Evolution IV 2.0 Turbo 1996-1998\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (6th Gen) 1996-2003 \/ Sedan (CJ) 1996-2003 \/ Lancer Evolution V 2.0 Turbo (w\/ 15\" Wheels) 1998-1999\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (6th Gen) 1996-2003 \/ Sedan (CJ) 1996-2003 \/ Lancer Evolution V GSR 2.0 Turbo 1998-1999\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (6th Gen) 1996-2003 \/ Sedan (CJ) 1996-2003 \/ Lancer Evolution V RS 2.0 Turbo 1998-1999\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (6th Gen) 1996-2003 \/ Sedan (CJ) 1996-2003 \/ Lancer Evolution VI 2.0 Turbo (w\/ 15\" Wheels) 1999-2001\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (6th Gen) 1996-2003 \/ Sedan (CJ) 1996-2003 \/ Lancer Evolution VI 2.0 Turbo 1999-2001\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (6th Gen) 1996-2003 \/ Sedan (CJ) 1996-2003 \/ Lancer Evolution VII 2.0 Turbo 2001-2003\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution IX 2.0 Turbo (CT9A) 2005-2008\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution IX FQ-360 2.0 Turbo (CT9A) 2005-2008\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution VIII 2.0 Turbo (CT9A) 2004-2005\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution VIII FQ-400 2.0 Turbo (400HP\/294KW) 2004-2005\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely and remove the wheel. Separate the ball joint from the hub with a proper ball joint splitter, remove the factory part and fit the Hardrace part in its place. Depending on the car, a pressed-in joint may need a press or ball joint tool. Tighten all fixings to the vehicle manufacturer's torque figures and fit new split pins where used. Have a full alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes, have a full alignment done after fitting.\u003c\/p\u003e\n\u003ch3\u003eIs it the same size as the factory joint?\u003c\/h3\u003e\n\u003cp\u003eYes. It is built to the factory dimensions, so it fits the factory arm or hub.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780057723192,"sku":"HR-7366","price":105.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/2015121834358i34e35jf.jpg?v=1678898746"},{"product_id":"hardrace-oe-style-hardnened-tie-rod-mitsubushi-evo-7-8-9-0-11","title":"Hardrace OE Style Hardened Tie Rods Mitsubishi Evo 7 8 9 01-07","description":"\u003ch2\u003eHardrace Hardened Tie Rods for Mitsubishi Lancer CJ\/CS (1996-2008) – Sharper, More Precise Steering\u003c\/h2\u003e\n\u003cp\u003eThe inner tie rods connect the steering rack to the hubs, so any flex or play blunts the steering. These Hardrace hardened tie rods are an upgrade built to the factory pattern, with a stronger construction that keeps the steering sharp and precise.\u003c\/p\u003e\n\u003cp\u003eIt suits the Mitsubishi Lancer CJ\/CS (1996-2008).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHardened, stronger construction\u003c\/li\u003e\n\u003cli\u003eSharper, more precise steering\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHardened tie rods (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMitsubishi \/ Lancer (6th Gen) 1996-2003 \/ Sedan (CJ) 1996-2003 \/ Lancer Evolution VII 2.0 Turbo 2001-2003\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution IX 2.0 Turbo (CT9A) 2005-2008\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution IX FQ-360 2.0 Turbo (CT9A) 2005-2008\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution VIII 2.0 Turbo (CT9A) 2004-2005\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution VIII FQ-400 2.0 Turbo (400HP\/294KW) 2004-2005\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely and remove the wheel. Note the position of the factory part, then remove the tie rod end and steering boot and unscrew the inner tie rod from the rack. Fit the Hardrace part, tighten all fixings to the vehicle manufacturer's torque figures, and have the front tracking set straight away. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes, have the front tracking set straight after fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780057755960,"sku":"HR-Q0042","price":66.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/2017921161116m1x1ol.jpg?v=1678898747"},{"product_id":"hardrace-extended-wheel-studs-m12xp1-5-20pc-set-mitsubishi-lancer-evo-7-9-01-09","title":"Hardrace Extended Wheel Studs M12XP1.5 Mitsubishi Lancer Evo 7-9 01-09","description":"\u003ch2\u003eHardrace Extended Wheel Studs for Mitsubishi Lancer CJ\/CS (1996-2008) – More Thread Engagement\u003c\/h2\u003e\n\u003cp\u003eExtended wheel studs give more thread engagement when you fit wheel spacers or thicker aftermarket wheels, so the wheel nuts hold securely. These Hardrace extended wheel studs are a high-strength upgrade.\u003c\/p\u003e\n\u003cp\u003eThread: M12 x 1.5.\u003c\/p\u003e\n\u003cp\u003eIt suits the Mitsubishi Lancer CJ\/CS (1996-2008).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMore thread engagement with spacers\u003c\/li\u003e\n\u003cli\u003eHigh-strength construction\u003c\/li\u003e\n\u003cli\u003eM12 x 1.5 thread\u003c\/li\u003e\n\u003cli\u003e20-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExtended wheel studs (20 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMitsubishi \/ Lancer (6th Gen) 1996-2003 \/ Sedan (CJ) 1996-2003 \/ Lancer Evolution VII 2.0 Turbo 2001-2003\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution IX 2.0 Turbo (CT9A) 2005-2008\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution IX FQ-360 2.0 Turbo (CT9A) 2005-2008\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution VIII 2.0 Turbo (CT9A) 2004-2005\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (7th Gen) 2003-2007 \/ Sedan (CS) 2003-2007 \/ Lancer Evolution VIII FQ-400 2.0 Turbo (400HP\/294KW) 2004-2005\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e M12 x P1.5 For EVO 1~10 use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eRemove the wheel, brake calliper and disc, then press out the factory studs and press in the Hardrace studs, making sure they seat fully. Refit everything and tighten the wheel nuts to the correct torque. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need these with wheel spacers?\u003c\/h3\u003e\n\u003cp\u003eIf your spacers or wheels reduce the thread engagement, longer studs make sure the wheel nuts hold securely.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780057788728,"sku":"HR-7620","price":108.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20156301526015m26m0en.jpg?v=1678898748"},{"product_id":"hardrace-adjustable-universal-drop-links-10mm-rod-ends-100-109mm","title":"Hardrace Adjustable Universal Drop Links 10mm Rod Ends 100-109mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 100-120mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 100-120mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 100-120mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop link\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Convertible (V36) 2009-2013 \/ G37 Convertible 3.7 2009-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Coupe (V36) 2008-2013 \/ G37 Coupe 3.7 2008-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Sedan (V36) 2006-2013 \/ G25 Sedan 2.5 2010-2012\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Sedan (V36) 2006-2013 \/ G35 Sedan 3.5 2006-2008\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Sedan (V36) 2006-2013 \/ G37 Sedan 3.7 2007-2013\u003c\/li\u003e\n\u003cli\u003eNissan \/ 350Z 2002-2009 \/ Coupe (Z33) 2002-2009 \/ 350Z 3.5 2002-2009\u003c\/li\u003e\n\u003cli\u003ePorsche \/ 911 (5th Gen) 1997-2005 \/ 911 (996) 1997-2005 \/ 911 Carrera 3.4 1997-2002\u003c\/li\u003e\n\u003cli\u003ePorsche \/ 911 (5th Gen) 1997-2005 \/ 911 (996) 1997-2005 \/ 911 Carrera 4 3.4 1997-2002\u003c\/li\u003e\n\u003cli\u003eFord \/ Focus (4th Gen) 2018-Present \/ Hatchback (C519) 2018-Present \/ Focus 1.0 Turbo 2018-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Focus (4th Gen) 2018-Present \/ Hatchback (C519) 2018-Present \/ Focus 1.0 Turbo Hybrid 2018-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Focus (4th Gen) 2018-Present \/ Hatchback (C519) 2018-Present \/ Focus 1.5 TD 2018-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Focus (4th Gen) 2018-Present \/ Hatchback (C519) 2018-Present \/ Focus 1.5 Turbo 2018-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Focus (4th Gen) 2018-Present \/ Hatchback (C519) 2018-Present \/ Focus 2.0 TD 2018-Present\u003c\/li\u003e\n\u003cli\u003eNissan \/ 350Z 2002-2009 \/ Coupe (Z33) 2002-2009 \/ 350Z 3.5 (w\/ Brembo) 2002-2009\u003c\/li\u003e\n\u003cli\u003eNissan \/ 350Z 2002-2009 \/ Roadster (Z33) 2004-2009 \/ 350Z 3.5 (w\/ Brembo) 2004-2009\u003c\/li\u003e\n\u003cli\u003eNissan \/ 350Z 2002-2009 \/ Roadster (Z33) 2004-2009 \/ 350Z 3.5 2004-2009\u003c\/li\u003e\n\u003cli\u003eNissan \/ 370Z 2009-Present \/ Coupe (Z34) 2009-Present \/ 370Z 3.7 2009-Present\u003c\/li\u003e\n\u003cli\u003eNissan \/ 370Z 2009-Present \/ Roadster (Z34) 2009-Present \/ 370Z 3.7 2009-Present\u003c\/li\u003e\n\u003cli\u003eHonda \/ Accord 4-Door Sedan \/ 2003-2005 \/ 2.0i\u003c\/li\u003e\n\u003cli\u003eHonda \/ Accord 4-Door Sedan \/ 2003-2005 \/ 2.4i\u003c\/li\u003e\n\u003cli\u003eHonda \/ Accord 4-Door Sedan \/ 2005-2008 \/ 2.0i\u003c\/li\u003e\n\u003cli\u003eHonda \/ Accord 4-Door Sedan \/ 2005-2008 \/ 2.4i\u003c\/li\u003e\n\u003cli\u003eHonda \/ CR-V \/ 2017-2023 \/ 2.0 2WD\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Focus MK4 : Not For Wagon use; Porsche 996: For C2\/C4\/Turbo Rear Side use; CR-V '17-: For AWD Rear Side use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780138529080,"sku":"HR-6853-100","price":106.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201512992409u2d40ms.jpg?v=1678899660"},{"product_id":"hardrace-adjustable-universal-drop-links-10mm-rod-ends-125-164mm","title":"Hardrace Adjustable Universal Drop Links 10mm Rod Ends 125-164mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 125-164mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 125-164mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 125-164mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW \/ 1-Series (2nd Gen) \/ Hatchback 3DR (F21) \/ 2011-2019\u003c\/li\u003e\n\u003cli\u003eBMW \/ 1-Series (2nd Gen) \/ Hatchback 5DR (F20) \/ 2011-2019\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (6th Gen) \/ Gran Turismo (F34) \/ 2011-2019\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (6th Gen) \/ Sedan (F30) \/ 2011-2019\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (6th Gen) \/ Touring (F31) \/ 2011-2019\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (7th Gen) \/ Sedan (G20) \/ 2019-Present\u003c\/li\u003e\n\u003cli\u003eBMW \/ 4-Series (2nd Gen) \/ Convertible (G23) \/ 2020-Present\u003c\/li\u003e\n\u003cli\u003eBMW \/ 4-Series (2nd Gen) \/ Coupe (G22) \/ 2020-Present\u003c\/li\u003e\n\u003cli\u003eBMW \/ 4-Series (2nd Gen) \/ Gran Coupe (G26) \/ 2020-Present\u003c\/li\u003e\n\u003cli\u003eBMW \/ Z4 (3rd Gen) \/ Roadster (G29) \/ 2019-Present\u003c\/li\u003e\n\u003cli\u003eHonda \/ Accord 4-Door Sedan \/ 2008-2011\u003c\/li\u003e\n\u003cli\u003eMazda \/ 3 (3rd Gen) \/ Hatchback (BM\/BN) \/ 2013-2018\u003c\/li\u003e\n\u003cli\u003eMazda \/ 3 (3rd Gen) \/ Sedan (BM\/BN) \/ 2013-2018\u003c\/li\u003e\n\u003cli\u003eMazda \/ 6 (3rd Gen) \/ Sedan (GJ\/GL) \/ 2012-Present\u003c\/li\u003e\n\u003cli\u003eMazda \/ 6 (3rd Gen) \/ Wagon (GJ\/GL) \/ 2012-Present\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-5 (1st Gen) \/ SUV (KE) \/ 2012-2017\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-5 (2nd Gen) \/ SUV (KF) \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-9 (2nd Gen) \/ SUV (TC) \/ 2016-Present\u003c\/li\u003e\n\u003cli\u003eTesla \/ Model 3 \/ Sedan (5YJ3) \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eTesla \/ Model Y \/ SUV \/ 2020-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Supra (5th Gen) \/ Coupe (A90) \/ 2019-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780138561848,"sku":"HR-8659-140","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/2017541032810b3a28yc.jpg?v=1678899661"},{"product_id":"hardrace-adjustable-universal-drop-links-10mm-rod-ends-160-199mm","title":"Hardrace Adjustable Universal Drop Links 10mm Rod Ends 160-199mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 160-199mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 160-199mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 160-199mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop link\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAlfa Romeo \/ 147 \/ Hatchback (937) \/ 2000-2010\u003c\/li\u003e\n\u003cli\u003eAlfa Romeo \/ 156 \/ Sedan (932) \/ 1997-2007\u003c\/li\u003e\n\u003cli\u003eAlfa Romeo \/ 156 \/ Wagon (932) \/ 1997-2007\u003c\/li\u003e\n\u003cli\u003eAlfa Romeo \/ GT \/ Coupe (937) \/ 2003-2010\u003c\/li\u003e\n\u003cli\u003eMazda \/ 323 (8th Gen) \/ Hatchback (BJ) \/ 1998-2003\u003c\/li\u003e\n\u003cli\u003eMazda \/ 323 (8th Gen) \/ Sedan (BJ) \/ 1998-2003\u003c\/li\u003e\n\u003cli\u003eMazda \/ Premacy (1st Gen) \/ MPV (CP) (5 Seat) \/ 1999-2005\u003c\/li\u003e\n\u003cli\u003eMazda \/ Premacy (1st Gen) \/ MPV (CP) (7 Seat) \/ 1999-2005\u003c\/li\u003e\n\u003cli\u003eToyota \/ MR2 (2nd Gen) \/ Coupe (W20) \/ 1989-1999\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780138594616,"sku":"HR-8659-180","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20167794239d42x3vs.jpg?v=1678899661"},{"product_id":"hardrace-adjustable-universal-drop-links-10mm-rod-ends-200-239mm","title":"Hardrace Adjustable Universal Drop Links 10mm Rod Ends 200-239mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 200-239mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 200-239mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 200-239mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop link\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHonda \/ Civic 3-Door Hatchback \/ 2007-2011\u003c\/li\u003e\n\u003cli\u003eHonda \/ Civic 5-Door Hatchback \/ 2005-2012\u003c\/li\u003e\n\u003cli\u003eKia \/ Picanto (1st Gen) \/ Hatchback (BA\/SA) \/ 2004-2011\u003c\/li\u003e\n\u003cli\u003eLexus \/ ES (4th Gen) \/ Sedan (XV30) \/ 2001-2006\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (2nd Gen) \/ SUV (XU30) \/ 2003-2009\u003c\/li\u003e\n\u003cli\u003eMINI \/ Mini (1st Gen) \/ Convertible (R52) \/ 2001-2008\u003c\/li\u003e\n\u003cli\u003eMINI \/ Mini (1st Gen) \/ Hatchback (R50) \/ 2001-2008\u003c\/li\u003e\n\u003cli\u003eMINI \/ Mini (1st Gen) \/ Hatchback (R53) \/ 2001-2008\u003c\/li\u003e\n\u003cli\u003eToyota \/ Camry  (7th Gen) \/ Sedan (XV40) \/ 2007-2012\u003c\/li\u003e\n\u003cli\u003eToyota \/ Camry (6th Gen) \/ Sedan (XV30) \/ 2001-2006\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780138627384,"sku":"HR-8659-220","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20168413391313k39g13cv.jpg?v=1678899662"},{"product_id":"hardrace-adjustable-universal-drop-links-10mm-rod-ends-240-279mm","title":"Hardrace Adjustable Universal Drop Links 10mm Rod Ends 240-279mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 240-279mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 240-279mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 240-279mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi \/ A1 (1st Gen) \/ 2010-2018\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (4th Gen) \/ 1998-2007\u003c\/li\u003e\n\u003cli\u003eBMW \/ Z4 (1st Gen) \/ 2003-2009\u003c\/li\u003e\n\u003cli\u003eFord \/ Fiesta (6th Gen) (UKDM MK7) \/ 2008-2017\u003c\/li\u003e\n\u003cli\u003eMazda \/ 2 (3rd Gen) \/ 2007-2014\u003c\/li\u003e\n\u003cli\u003eMazda \/ 3 (4th Gen) \/ 2019-Present\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-3 \/ 2015-Present\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-30 \/ 2019-Present\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Eclipse Cross \/ 2018-Present\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (8th Gen) \/ 2007-2017\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Outlander (2nd Gen) \/ 2007-2012\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Outlander (3rd Gen) \/ 2012-Present\u003c\/li\u003e\n\u003cli\u003eNissan \/ Cube (3rd Gen) \/ 2008-2011\u003c\/li\u003e\n\u003cli\u003eNissan \/ Micra (3rd Gen) \/ 2003-2010\u003c\/li\u003e\n\u003cli\u003eNissan \/ Micra (4th Gen) \/ 2010-2017\u003c\/li\u003e\n\u003cli\u003eSkoda \/ Fabia (2nd Gen) \/ 2007-2014\u003c\/li\u003e\n\u003cli\u003eSkoda \/ Fabia (3rd Gen) \/ 2014-2022\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ SX4 (MK1) \/ 2006-2013\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ SX4 S-Cross \/ 2013-2021\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Swift (MK5) \/ 2010-2017\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Vitara (MK4) \/ 2015-Present\u003c\/li\u003e\n\u003cli\u003eVolkswagen \/ Polo (5th Gen) \/ 2009-2017\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780138922296,"sku":"HR-8659-260","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201662413132313r13w23gq.jpg?v=1678899664"},{"product_id":"hardrace-adjustable-universal-drop-links-10mm-rod-ends-280-319mm","title":"Hardrace Adjustable Universal Drop Links 10mm Rod Ends 280-319mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 280-319mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 280-319mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 280-319mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW \/ 1-Series (1st Gen) \/ 2003-2013\u003c\/li\u003e\n\u003cli\u003eBMW \/ 1-Series (2nd Gen) \/ 2011-2019\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (5th Gen) \/ 2004-2013\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (6th Gen) \/ 2011-2019\u003c\/li\u003e\n\u003cli\u003eBMW \/ 4-Series (2nd Gen) \/ 2020-Present\u003c\/li\u003e\n\u003cli\u003eBMW \/ Z4 (2nd Gen) \/ 2009-2016\u003c\/li\u003e\n\u003cli\u003eFord \/ Kuga (2nd Gen) \/ 2012-2019\u003c\/li\u003e\n\u003cli\u003eFord \/ Mondeo (4th Gen) \/ 2007-2014\u003c\/li\u003e\n\u003cli\u003eHonda \/ Civic 5-Door Hatchback \/ 2022-Present\u003c\/li\u003e\n\u003cli\u003eHonda \/ Jazz (1st Gen) \/ 2002-2008\u003c\/li\u003e\n\u003cli\u003eHonda \/ Jazz (2nd Gen) \/ 2008-2015\u003c\/li\u003e\n\u003cli\u003eHonda \/ Jazz (3rd Gen) \/ 2015-2020\u003c\/li\u003e\n\u003cli\u003eHonda \/ Jazz (4th Gen) \/ 2020-Present\u003c\/li\u003e\n\u003cli\u003eMG \/ ZS \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eMINI \/ Mini (2nd Gen) \/ 2006-2016\u003c\/li\u003e\n\u003cli\u003eMazda \/ 3 (3rd Gen) \/ 2013-2018\u003c\/li\u003e\n\u003cli\u003eMazda \/ 5 (2nd Gen) \/ 2005-2010\u003c\/li\u003e\n\u003cli\u003eMazda \/ 6 (3rd Gen) \/ 2012-Present\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-5 (1st Gen) \/ 2012-2017\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-5 (2nd Gen) \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-9 (2nd Gen) \/ 2016-Present\u003c\/li\u003e\n\u003cli\u003eMini \/ Countryman (3rd Gen) \/ 2023-Present\u003c\/li\u003e\n\u003cli\u003eMini \/ Mini (3rd Gen) \/ 2014-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ S60 (2nd Gen) \/ 2010-2018\u003c\/li\u003e\n\u003cli\u003eVolvo \/ S80 (2nd Gen) \/ 2006-2016\u003c\/li\u003e\n\u003cli\u003eVolvo \/ V60 (1st Gen) \/ 2010-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ V70 (3rd Gen) \/ 2007-2016\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC70 (2nd Gen) \/ 2007-2016\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Porsche 996\/997: For C4\/Turbo Front Side use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780138955064,"sku":"HR-8659-300","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20166241331113w31d1wn.jpg?v=1678899665"},{"product_id":"hardrace-adjustable-universal-drop-links-12mm-rod-ends-104-130mm","title":"Hardrace Adjustable Universal Drop Links 12mm Rod Ends 104-130mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 104-130mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 104-130mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 104-130mm\u003c\/li\u003e\n\u003cli\u003e12mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInfiniti \/ FX (2nd Gen) 2008-2013 \/ SUV (S51) 2008-2013 \/ FX30D 3.0 TD 2010-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ FX (2nd Gen) 2008-2013 \/ SUV (S51) 2008-2013 \/ FX37 3.7 2008-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ FX (2nd Gen) 2008-2013 \/ SUV (S51) 2008-2013 \/ FX50 5.0 2008-2013\u003c\/li\u003e\n\u003cli\u003eLexus \/ LS (1st Gen) 1989-1994 \/ Sedan (XF10) 1989-1994 \/ LS400 4.0 (UCF10) 1989-1992\u003c\/li\u003e\n\u003cli\u003eLexus \/ LS (1st Gen) 1989-1994 \/ Sedan (XF10) 1989-1994 \/ LS400 4.0 (UCF11) 1992-1994\u003c\/li\u003e\n\u003cli\u003eLexus \/ LS (2nd Gen) 1994-2000 \/ Sedan (XF20) 1994-2000 \/ LS400 4.0 (UCF20\/UCF21) 1994-2000\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (3rd Gen) 2008-2015 \/ SUV (AL10) 2008-2015 \/ RX270 2.7 (AGL10) 2008-2015\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (3rd Gen) 2008-2015 \/ SUV (AL10) 2008-2015 \/ RX350 3.5 (AWD) (GGL15) 2008-2012\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (3rd Gen) 2008-2015 \/ SUV (AL10) 2008-2015 \/ RX350 3.5 (GRL10) 2008-2012\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (3rd Gen) 2008-2015 \/ SUV (AL10) 2008-2015 \/ RX350 3.5 (GYL10) 2008-2015\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (3rd Gen) 2008-2015 \/ SUV (AL10) 2008-2015 \/ RX450h Hybrid 3.5 (AWD) (GYL15) 2008-2015\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (3rd Gen) 2008-2015 \/ SUV (AL10) 2008-2015 \/ RX450h Hybrid 3.5 (GYL10) 2008-2015\u003c\/li\u003e\n\u003cli\u003eFord \/ Kuga (3rd Gen) 2019-Present \/ SUV (CX482) 2019-Present \/ Kuga 1.5 Turbo 2019-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Kuga (3rd Gen) 2019-Present \/ SUV (CX482) 2019-Present \/ Kuga 2.0 Turbo 2019-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Kuga (3rd Gen) 2019-Present \/ SUV (CX482) 2019-Present \/ Kuga 2.0TD 2019-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Kuga (3rd Gen) 2019-Present \/ SUV (CX482) 2019-Present \/ Kuga 2.5 Hybrid 2019-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Kuga (3rd Gen) 2019-Present \/ SUV (CX482) 2019-Present \/ Kuga 2.5 PHEV 2019-Present\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (4th Gen) 2015-2023 \/ SUV (AL20) 2015-2023 \/ RX200t 2.0 Turbo (AGL20) 2015-2023\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (4th Gen) 2015-2023 \/ SUV (AL20) 2015-2023 \/ RX200t 2.0 Turbo (AWD) (AGL25) 2015-2023\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (4th Gen) 2015-2023 \/ SUV (AL20) 2015-2023 \/ RX350 3.5 (AWD) (GGL25) 2015-2023\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (4th Gen) 2015-2023 \/ SUV (AL20) 2015-2023 \/ RX450h Hybrid 3.5 (AWD) (GYL25) 2015-2023\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (4th Gen) 2015-2023 \/ SUV (AL20) 2015-2023 \/ RX450h Hybrid 3.5 (GYL20) 2015-2023\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139020600,"sku":"HR-8793-110","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201721616354516k35m45yu.jpg?v=1678899666"},{"product_id":"hardrace-adjustable-universal-drop-links-12mm-rod-ends-123-162mm","title":"Hardrace Adjustable Universal Drop Links 12mm Rod Ends 123-162mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 123-162mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 123-162mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 123-162mm\u003c\/li\u003e\n\u003cli\u003e12mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFord \/ Mustang (6th Gen) \/ Convertible (S550) \/ 2014-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Mustang (6th Gen) \/ Coupe (S550) \/ 2014-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ S60 (1st Gen) \/ Sedan (P24) \/ 2000-2009\u003c\/li\u003e\n\u003cli\u003eVolvo \/ S80 (1st Gen) \/ Sedan (TS) \/ 1998-2006\u003c\/li\u003e\n\u003cli\u003eVolvo \/ V70 (2nd Gen) \/ Wagon (Cross Country) \/ 2000-2007\u003c\/li\u003e\n\u003cli\u003eVolvo \/ V70 (2nd Gen) \/ Wagon (SW) \/ 2000-2007\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC70 (1st Gen) \/ Wagon \/ 2000-2007\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC90 (1st Gen) \/ SUV \/ 2002-2014\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Ace use (Rear).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139184440,"sku":"HR-8793-140","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/2017291348913z48b9jg.jpg?v=1678899668"},{"product_id":"hardrace-adjustable-universal-drop-links-12mm-rod-ends-163-202mm","title":"Hardrace Adjustable Universal Drop Links 12mm Rod Ends 163-202mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 163-202mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 163-202mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 163-202mm\u003c\/li\u003e\n\u003cli\u003e12mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW \/ 5-Series (6th Gen) \/ Gran Turismo (F07) \/ 2008-2017\u003c\/li\u003e\n\u003cli\u003eVolvo \/ S60 (3rd Gen) \/ Sedan \/ 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ S90 (2nd Gen) \/ Sedan \/ 2016-2025\u003c\/li\u003e\n\u003cli\u003eVolvo \/ V60 (2nd Gen) \/ Wagon \/ 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ V90 (2nd Gen) \/ Wagon \/ 2016-2025\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC60 (2nd Gen) \/ SUV \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC90 (2nd Gen) \/ SUV \/ 2014-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e BMW G30: For AWD use (Front).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-universal-adjustable-stabiliser-link-2pcs-range-90-110mm-12mm-stud-rod-end\"\u003eHardrace Universal Adjustable Stabiliser Link 2pcs Range 90-110mm 12mm Stud Rod End\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139217208,"sku":"HR-8793-180","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20172913484113l48d41tj.jpg?v=1678899668"},{"product_id":"hardrace-adjustable-universal-drop-links-12mm-rod-ends-203-242mm","title":"Hardrace Adjustable Universal Drop Links 12mm Rod Ends 203-242mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 203-242mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 203-242mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 203-242mm\u003c\/li\u003e\n\u003cli\u003e12mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW \/ 5-Series (7th Gen) \/ Sedan (G30) \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eBMW \/ 5-Series (7th Gen) \/ Touring (G31) \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eCadillac \/ ATS \/ Sedan \/ 2012-Present\u003c\/li\u003e\n\u003cli\u003eCadillac \/ CTS (3rd Gen) \/ Sedan \/ 2013-Present\u003c\/li\u003e\n\u003cli\u003eChevrolet \/ Camaro (6th Gen) \/ Coupe \/ 2015-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Mustang (6th Gen) \/ Convertible (S550) \/ 2014-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Mustang (6th Gen) \/ Coupe (S550) \/ 2014-Present\u003c\/li\u003e\n\u003cli\u003eSaab \/ 95 \/ 1999-2008\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e BMW G30: For RWD use (Front).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139249976,"sku":"HR-8793-220","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20172913491013n49k10fa.jpg?v=1678899669"},{"product_id":"hardrace-adjustable-universal-drop-links-12mm-rod-ends-243-282mm","title":"Hardrace Adjustable Universal Drop Links 12mm Rod Ends 243-282mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 243-282mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 243-282mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 243-282mm\u003c\/li\u003e\n\u003cli\u003e12mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLexus \/ ES (4th Gen) \/ Sedan (XV30) \/ 2001-2006\u003c\/li\u003e\n\u003cli\u003eLexus \/ GS (1st Gen) \/ Sedan (S140) \/ 1991-1997\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (2nd Gen) \/ SUV (XU30) \/ 2003-2009\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (3rd Gen) \/ SUV (AL10) \/ 2008-2015\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (4th Gen) \/ SUV (AL20) \/ 2015-2023\u003c\/li\u003e\n\u003cli\u003eMG \/ HS \/ SUV \/ 2019-Present\u003c\/li\u003e\n\u003cli\u003eNissan \/ Juke \/ SUV (F15) \/ 2010-Present\u003c\/li\u003e\n\u003cli\u003eTesla \/ Model 3 \/ Sedan (5YJ3) \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eTesla \/ Model Y \/ SUV \/ 2020-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Camry  (7th Gen) \/ Sedan (XV40) \/ 2007-2012\u003c\/li\u003e\n\u003cli\u003eToyota \/ Camry (6th Gen) \/ Sedan (XV30) \/ 2001-2006\u003c\/li\u003e\n\u003cli\u003eToyota \/ Camry (9th Gen) \/ Sedan (XV70) \/ 2017-2024\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (10th Gen) \/ Sedan (E150) \/ 2007-2013\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (11th Gen) \/ Sedan (E170) \/ 2013-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) \/ Hatchback (E120) \/ 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) \/ Sedan (E120) \/ 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) \/ Wagon (E120) \/ 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Previa (2nd Gen) \/ MPV (XR30) \/ 2000-2006\u003c\/li\u003e\n\u003cli\u003eToyota \/ RAV4 (6th Gen) \/ SUV (XA60) \/ 2025-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-reinforced-front-drop-links-2pc-set-toyota-camry-xv30\"\u003eHardrace Reinforced Front Drop Links 2Pc Set Toyota Camry XV30 01-06\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-reinforced-rear-drop-links-2pc-set-toyota-camry-xv30\"\u003eHardrace Reinforced Rear Drop Links 2Pc Set Toyota Camry XV30 01-06\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-reinforced-20mm-shortened-front-stabilizer-links-2pc-set-toyota-camry-xv40-06-11\"\u003eHardrace Reinforced 20mm Shortened Front Stabilizer Links 2Pc Set Toyota Camry XV40 06-11\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139282744,"sku":"HR-8793-260","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20172913493213w49o32is.jpg?v=1678899669"},{"product_id":"hardrace-adjustable-universal-drop-links-12mm-rod-ends-283-322mm","title":"Hardrace Adjustable Universal Drop Links 12mm Rod Ends 283-322mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 283-322mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 283-322mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 283-322mm\u003c\/li\u003e\n\u003cli\u003e12mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi: A3 (2nd Gen) 2003-2013, A3 (3rd Gen) 2012-2020, Q3 2011-Present, TT (2nd Gen) 2006-2014\u003c\/li\u003e\n\u003cli\u003eBMW: 5-Series (6th Gen) 2008-2017, 7-Series (5th Gen) 2008-2015\u003c\/li\u003e\n\u003cli\u003eFord: Focus (4th Gen) 2018-Present, Kuga (3rd Gen) 2019-Present, Mondeo (5th Gen) 2014-Present\u003c\/li\u003e\n\u003cli\u003eHyundai: Elantra (4th Gen) 2006-2011, Elantra (5th Gen) 2011-2015, Veloster (2nd Gen) 2017-Present, i30 (3rd Gen) 2017-Present\u003c\/li\u003e\n\u003cli\u003eMercedes-Benz: C-Class (3rd Gen) 2007-2015, E-Class (4th Gen) 2009-2017\u003c\/li\u003e\n\u003cli\u003eNissan: Juke 2010-Present, Murano (1st Gen) 2002-2008\u003c\/li\u003e\n\u003cli\u003eSaab: 95 2008-2010\u003c\/li\u003e\n\u003cli\u003eSeat: Altea 2004-2015, Leon (2nd Gen) 2005-2012, Toledo (3rd Gen) 2004-2009\u003c\/li\u003e\n\u003cli\u003eSkoda: Karoq 2017-Present, Kodiaq (1st Gen) 2016-2023, Kodiaq (2nd Gen) 2023-Present, Octavia (3rd Gen) 2012-Present, Octavia (4th Gen) 2019-Present, Superb (3rd Gen) 2015-2023, Superb (4th Gen) 2023-Present\u003c\/li\u003e\n\u003cli\u003eSubaru: Forester (5th Gen) 2018-2023, XV (2nd Gen) 2018-2022\u003c\/li\u003e\n\u003cli\u003eTesla: Model 3 2017-Present, Model Y 2020-Present\u003c\/li\u003e\n\u003cli\u003eToyota: Auris (1st Gen) 2006-2012, Auris (2nd Gen) 2012-Present, Corolla (10th Gen) 2007-2013, Corolla (11th Gen) 2013-Present, Corolla (9th Gen) 2002-2007, Prius (2nd Gen) 2003-2009\u003c\/li\u003e\n\u003cli\u003eVolkswagen: Caddy (4th Gen) 2020-Present, Golf (5th Gen) 2003-2009, Golf (6th Gen) 2008-2016, Golf (7th Gen) 2012-2020, Jetta (5th Gen) 2005-2010, Jetta (6th Gen) 2010-2018, Passat (6th Gen) 2005-2010, Passat (7th Gen) 2010-2014, Passat (8th Gen) 2014-2023, Passat (9th Gen) 2023-Present, Scirocco (3rd Gen) 2008-2017, Sharan (2nd Gen) 2010-Present, Tiguan (1st Gen) 2007-2016, Tiguan (2nd Gen) 2016-2025, Tiguan (3rd Gen) 2023-Present, Touran (2nd Gen) 2015-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e FOR LOWERED PQ35\/PQ46\/MQB Models (Front).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139413816,"sku":"HR-8793-300","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20172913494813r49d48py.jpg?v=1678899671"},{"product_id":"hardrace-adjustable-universal-drop-links-12mm-rod-ends-323-362mm","title":"Hardrace Adjustable Universal Drop Links 12mm Rod Ends 323-362mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 323-362mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 323-362mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 323-362mm\u003c\/li\u003e\n\u003cli\u003e12mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi: A3 (2nd Gen) 2003-2013, A3 (3rd Gen) 2012-2020, Q3 2011-Present, TT (2nd Gen) 2006-2014, TT (3rd Gen) 2014-Present\u003c\/li\u003e\n\u003cli\u003eHyundai: Santa Fe (2nd Gen) 2006-2012, Santa Fe (3rd Gen) 2012-2018\u003c\/li\u003e\n\u003cli\u003eInfiniti: Q30 (1st Gen) 2015-2019, QX30 2016-2019\u003c\/li\u003e\n\u003cli\u003eLexus: CT 2010-Present, NX 2014-Present, UX 2018-Present\u003c\/li\u003e\n\u003cli\u003eMercedes-Benz: A-Class (3rd Gen) 2012-2018, B-Class (2nd Gen) 2011-2019, CLA-Class (1st Gen) 2013-2019, GLA-Class (1st Gen) 2013-2020\u003c\/li\u003e\n\u003cli\u003eSaab: 9-3 (2nd Gen) 2004-2011, 9-3 (2nd Gen) 2004-2011 2003-2012\u003c\/li\u003e\n\u003cli\u003eSkoda: Karoq 2017-Present, Kodiaq (1st Gen) 2016-2023, Kodiaq (2nd Gen) 2023-Present, Octavia (3rd Gen) 2012-Present, Octavia (4th Gen) 2019-Present, Superb (3rd Gen) 2015-2023, Superb (4th Gen) 2023-Present\u003c\/li\u003e\n\u003cli\u003eToyota: C-HR (1st Gen) 2016-Present, Corolla (12th Gen) 2018-Present, Prius (3rd Gen) 2009-2016, Prius (4th Gen) 2016-2019, Prius (5th Gen) 2023-Present, RAV4 (3rd Gen) 2005-2013, RAV4 (4th Gen) 2013-2018, RAV4 (5th Gen) 2018-2025, Yaris (2nd Gen) 2005-2012\u003c\/li\u003e\n\u003cli\u003eVolkswagen: Caddy (4th Gen) 2020-Present, Golf (4th Gen) 1997-2006, Golf (5th Gen) 2003-2009, Golf (6th Gen) 2008-2016, Golf (7th Gen) 2012-2020, Jetta (5th Gen) 2005-2010, Jetta (6th Gen) 2010-2018, Passat (6th Gen) 2005-2010, Passat (7th Gen) 2010-2014, Passat (8th Gen) 2014-2023, Passat (9th Gen) 2023-Present, Scirocco (3rd Gen) 2008-2017, Sharan (2nd Gen) 2010-Present, Tiguan (1st Gen) 2007-2016, Tiguan (2nd Gen) 2016-2025, Tiguan (3rd Gen) 2023-Present, Touran (2nd Gen) 2015-Present\u003c\/li\u003e\n\u003cli\u003eVolvo: S60 (1st Gen) 2000-2009, S80 (1st Gen) 1998-2006, V70 (2nd Gen) 2000-2007, XC70 (1st Gen) 2000-2007\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e For PQ35\/PQ46\/MQB Models OE Replacement (Front).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139446584,"sku":"HR-8793-340","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/2017291350913s50l9lg.jpg?v=1678899672"},{"product_id":"hardrace-adjustable-universal-drop-links-12mm-rod-ends-90-degree-rotated-280-319mm","title":"Hardrace Adjustable Universal Drop Links 12mm Rod Ends 90 Degree Rotated 280-319mm","description":"\u003ch2\u003eHardrace Adjustable Universal Drop Links 12mm Rod Ends 90 Degree Rotated 280-319mm – Stronger Than The Factory Links\u003c\/h2\u003e\n\u003cp\u003eDrop links connect the anti-roll bar to the suspension, so any play in them delays the bar's response. This Hardrace drop link set is a stronger upgrade that keeps the anti-roll bar working instantly and precisely, for flatter, more controlled cornering.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStronger than the factory links\u003c\/li\u003e\n\u003cli\u003eQuicker anti-roll bar response\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eCheck the size and fitment against your car before ordering, or contact us if you are unsure.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely. Remove the factory part and fit the Hardrace part in its place, tightening all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height. Have the alignment checked after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139479352,"sku":"HR-7750-300","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201512992409u2d40ms_73b2e11f-4136-4014-8308-bbc1f75702a7.jpg?v=1678899673"},{"product_id":"hardrace-adjustable-universal-drop-links-10mm-rod-ends-320-359mm-honda-civic-type-r-fk8-17-21","title":"Hardrace Adjustable Universal Drop Links 10mm Rod Ends 320-359mm Honda","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 320-359mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 320-359mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 320-359mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop link\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo \/ XC90 (1st Gen) 2002-2014 \/ SUV 2002-2014 \/ XC90 2.5 Turbo 2002-2006\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC90 (1st Gen) 2002-2014 \/ SUV 2002-2014 \/ XC90 3.2 2006-2012\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC90 (1st Gen) 2002-2014 \/ SUV 2002-2014 \/ XC90 4.4 2005-2010\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC90 (1st Gen) 2002-2014 \/ SUV 2002-2014 \/ XC90 D3 2.4 TD 2010-2014\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC90 (1st Gen) 2002-2014 \/ SUV 2002-2014 \/ XC90 D4 2.4 TD 2010-2014\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC90 (1st Gen) 2002-2014 \/ SUV 2002-2014 \/ XC90 D5 2.4 TD 2002-2014\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC90 (1st Gen) 2002-2014 \/ SUV 2002-2014 \/ XC90 T6 2.9 Twin Turbo 2002-2006\u003c\/li\u003e\n\u003cli\u003eHonda \/ HR-V (3rd Gen) 2021-Present \/ SUV (RV) 2021-Present \/ HR-V 1.5 Hybrid 2021-Present\u003c\/li\u003e\n\u003cli\u003eHonda \/ Civic 5-Door Hatchback \/ 2022-Present \/ 2.0 Type-R (FL5)\u003c\/li\u003e\n\u003cli\u003eHonda \/ ZR-V 2023-Present \/ SUV 2023-Present \/ ZR-V Hybrid 2.0 Turbo 2023-Present\u003c\/li\u003e\n\u003cli\u003eMini \/ Countryman (3rd Gen) 2023-Present \/ SUV (U25) 2023-Present \/ Countryman 1.5 Turbo 2023-Present\u003c\/li\u003e\n\u003cli\u003eMini \/ Countryman (3rd Gen) 2023-Present \/ SUV (U25) 2023-Present \/ Countryman D 2.0 TD 2024-Present\u003c\/li\u003e\n\u003cli\u003eMini \/ Countryman (3rd Gen) 2023-Present \/ SUV (U25) 2023-Present \/ Countryman S 2.0 Turbo (4WD) 2023-Present\u003c\/li\u003e\n\u003cli\u003eMini \/ Countryman (3rd Gen) 2023-Present \/ SUV (U25) 2023-Present \/ Countrymen Electric 2024-Present\u003c\/li\u003e\n\u003cli\u003eMini \/ Countryman (3rd Gen) 2023-Present \/ SUV (U25) 2023-Present \/ Countrymen Electric SE (4WD) 2024-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139512120,"sku":"HR-8659-340","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201662413314813l31i48ha.jpg?v=1678899673"},{"product_id":"hardrace-adjustable-universal-stabilizers-links-10mm-rod-ends-2pc-set","title":"Hardrace Adjustable Universal Stabilisers Links 10mm Rod Ends","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 90-99mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 90-99mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 90-99mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop link\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSee title\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139544888,"sku":"HR-6405","price":106.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/2016112215404815m40k48su.jpg?v=1678899675"},{"product_id":"hardrace-universal-adjustable-drop-link-set-range-81-91mm-10mm-stud-rod-end","title":"Hardrace Universal Adjustable Drop Link Set Range 81-91mm 10mm Stud Rod End","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 81-91mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 81-91mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 81-91mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNissan \/ Murano (1st Gen) 2002-2008 \/ SUV (Z50) 2002-2008 \/ Murano 3.5 2002-2006\u003c\/li\u003e\n\u003cli\u003eNissan \/ Murano (1st Gen) 2002-2008 \/ SUV (Z50) 2002-2008 \/ Murano 3.5 2006-2008\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139610424,"sku":"HR-6853-080","price":106.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hard-race-drops_18.jpg?v=1678899675"},{"product_id":"hardrace-universal-adjustable-stabilizer-link-2pcs-set-range-220-259mm-10mm-stud-rod-end","title":"Hardrace Universal Adjustable Stabiliser Link 220-259mm 10mm Stud Rod End","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 220-259mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 220-259mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 220-259mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW \/ 3-Series (2nd Gen) \/ Convertible (E30) \/ 1982-1994\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (2nd Gen) \/ Sedan (E30) \/ 1982-1994\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (3rd Gen) \/ Compact (E36) \/ 1990-2000\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (3rd Gen) \/ Convertible (E36) \/ 1990-2000\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (3rd Gen) \/ Coupe (E36) \/ 1990-2000\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (3rd Gen) \/ Sedan (E36) \/ 1990-2000\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (3rd Gen) \/ Touring (E36) \/ 1990-2000\u003c\/li\u003e\n\u003cli\u003eBMW \/ 5-Series (2nd Gen) \/ Sedan (E28) \/ 1980-1987\u003c\/li\u003e\n\u003cli\u003eBMW \/ 5-Series (3rd Gen) \/ Sedan (E34) \/ 1986-1997\u003c\/li\u003e\n\u003cli\u003eBMW \/ 5-Series (3rd Gen) \/ Touring (E34) \/ 1987-1997\u003c\/li\u003e\n\u003cli\u003eBMW \/ 7-Series (2nd Gen) \/ Sedan (E32) \/ 1986-1994\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e E30: For M3 use only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-universal-drop-links-bushes-10mm-id-4pc-set\"\u003eHardrace Universal Drop Links Bushes 10mm ID 4Pc Set\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139675960,"sku":"HR-8659-240","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/8659-240_main.jpg?v=1678899676"},{"product_id":"hardrace-universal-adjustable-drop-link-set-range-90-99mm-10mm-stud-rod-end","title":"Hardrace Universal Adjustable Drop Link Set Range 90-99mm 10mm Stud Rod End","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 90-99mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 90-99mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 90-99mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop link\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSee title\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139708728,"sku":"HR-6853-090","price":106.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hard-race-drops_16.jpg?v=1678899677"},{"product_id":"hardrace-universal-adjustable-stabilizer-link-range-320-359mm-10mm-stud-rod-end-2pcs-set","title":"Hardrace Universal Adjustable Stabiliser Link Range:320-359mm 10mm Stud","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 320-359mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 320-359mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 320-359mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop link\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSee title\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780140560696,"sku":"HR-8863-340","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/8863-340_main.jpg?v=1678899678"},{"product_id":"hardrace-adjustable-10mm-camber-bolts-2-to-2-degree-range","title":"Hardrace Adjustable 10mm Camber Bolts -2 To +2 Degree Range","description":"\u003ch2\u003eHardrace Adjustable Camber Bolts 10mm – Adjustable Camber\u003c\/h2\u003e\n\u003cp\u003eMany cars have no factory camber adjustment on the strut. These Hardrace adjustable camber bolts fit in place of the strut-to-hub bolts and let you adjust camber, so you can dial in the alignment after lowering for even tyre wear and more grip.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdds camber adjustment at the strut\u003c\/li\u003e\n\u003cli\u003eEven tyre wear and more grip after lowering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable camber bolts 10mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eUniversal. Suits struts that use 10mm strut-to-hub bolts. Measure your bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, remove the wheel and swap one of the strut-to-hub bolts at a time for a Hardrace camber bolt. Set the camber, tighten to the vehicle manufacturer's torque figures and have a full alignment done. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eHow much camber do they add?\u003c\/h3\u003e\n\u003cp\u003eThe amount depends on the car. Have a full alignment done after fitting to set the camber you want.\u003c\/p\u003e\n\u003ch3\u003eWill they fit my car?\u003c\/h3\u003e\n\u003cp\u003eCheck the bolt size against your strut-to-hub bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141117752,"sku":"HR-6700","price":53.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/6700.jpg?v=1678899679"},{"product_id":"hardrace-adjustable-12mm-camber-bolts-2-to-2-degree-range","title":"Hardrace Adjustable 12mm Camber Bolts -2 To +2 Degree Range","description":"\u003ch2\u003eHardrace Adjustable Camber Bolts 12mm – Adjustable Camber\u003c\/h2\u003e\n\u003cp\u003eMany cars have no factory camber adjustment on the strut. These Hardrace adjustable camber bolts fit in place of the strut-to-hub bolts and let you adjust camber, so you can dial in the alignment after lowering for even tyre wear and more grip.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdds camber adjustment at the strut\u003c\/li\u003e\n\u003cli\u003eEven tyre wear and more grip after lowering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable camber bolts 12mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eUniversal. Suits struts that use 12mm strut-to-hub bolts. Measure your bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, remove the wheel and swap one of the strut-to-hub bolts at a time for a Hardrace camber bolt. Set the camber, tighten to the vehicle manufacturer's torque figures and have a full alignment done. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-14mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 14mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-15mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 15mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-16mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 16mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow much camber do they add?\u003c\/h3\u003e\n\u003cp\u003eThe amount depends on the car. Have a full alignment done after fitting to set the camber you want.\u003c\/p\u003e\n\u003ch3\u003eWill they fit my car?\u003c\/h3\u003e\n\u003cp\u003eCheck the bolt size against your strut-to-hub bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141150520,"sku":"HR-6701","price":53.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/6701.jpg?v=1678899680"},{"product_id":"hardrace-adjustable-14mm-camber-bolts-2-to-2-degree-range","title":"Hardrace Adjustable 14mm Camber Bolts -2 To +2 Degree Range","description":"\u003ch2\u003eHardrace Adjustable Camber Bolts 14mm – Adjustable Camber\u003c\/h2\u003e\n\u003cp\u003eMany cars have no factory camber adjustment on the strut. These Hardrace adjustable camber bolts fit in place of the strut-to-hub bolts and let you adjust camber, so you can dial in the alignment after lowering for even tyre wear and more grip.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdds camber adjustment at the strut\u003c\/li\u003e\n\u003cli\u003eEven tyre wear and more grip after lowering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable camber bolts 14mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eUniversal. Suits struts that use 14mm strut-to-hub bolts. Measure your bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, remove the wheel and swap one of the strut-to-hub bolts at a time for a Hardrace camber bolt. Set the camber, tighten to the vehicle manufacturer's torque figures and have a full alignment done. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-12mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 12mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-15mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 15mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-16mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 16mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow much camber do they add?\u003c\/h3\u003e\n\u003cp\u003eThe amount depends on the car. Have a full alignment done after fitting to set the camber you want.\u003c\/p\u003e\n\u003ch3\u003eWill they fit my car?\u003c\/h3\u003e\n\u003cp\u003eCheck the bolt size against your strut-to-hub bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141183288,"sku":"HR-6702","price":53.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/6700_1.jpg?v=1678899680"},{"product_id":"hardrace-adjustable-15mm-camber-bolts-2-to-2-degree-range","title":"Hardrace Adjustable 15mm Camber Bolts -2 To +2 Degree Range","description":"\u003ch2\u003eHardrace Adjustable Camber Bolts 15mm – Adjustable Camber\u003c\/h2\u003e\n\u003cp\u003eMany cars have no factory camber adjustment on the strut. These Hardrace adjustable camber bolts fit in place of the strut-to-hub bolts and let you adjust camber, so you can dial in the alignment after lowering for even tyre wear and more grip.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdds camber adjustment at the strut\u003c\/li\u003e\n\u003cli\u003eEven tyre wear and more grip after lowering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable camber bolts 15mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eUniversal. Suits struts that use 15mm strut-to-hub bolts. Measure your bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, remove the wheel and swap one of the strut-to-hub bolts at a time for a Hardrace camber bolt. Set the camber, tighten to the vehicle manufacturer's torque figures and have a full alignment done. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-12mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 12mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-14mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 14mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-16mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 16mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow much camber do they add?\u003c\/h3\u003e\n\u003cp\u003eThe amount depends on the car. Have a full alignment done after fitting to set the camber you want.\u003c\/p\u003e\n\u003ch3\u003eWill they fit my car?\u003c\/h3\u003e\n\u003cp\u003eCheck the bolt size against your strut-to-hub bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141216056,"sku":"HR-6703","price":53.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/6700_2.jpg?v=1678899681"},{"product_id":"hardrace-adjustable-16mm-camber-bolts-2-to-2-degree-range","title":"Hardrace Adjustable 16mm Camber Bolts -2 To +2 Degree Range","description":"\u003ch2\u003eHardrace Adjustable Camber Bolts 16mm – Adjustable Camber\u003c\/h2\u003e\n\u003cp\u003eMany cars have no factory camber adjustment on the strut. These Hardrace adjustable camber bolts fit in place of the strut-to-hub bolts and let you adjust camber, so you can dial in the alignment after lowering for even tyre wear and more grip.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdds camber adjustment at the strut\u003c\/li\u003e\n\u003cli\u003eEven tyre wear and more grip after lowering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable camber bolts 16mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eUniversal. Suits struts that use 16mm strut-to-hub bolts. Measure your bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, remove the wheel and swap one of the strut-to-hub bolts at a time for a Hardrace camber bolt. Set the camber, tighten to the vehicle manufacturer's torque figures and have a full alignment done. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-12mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 12mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-14mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 14mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-15mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 15mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow much camber do they add?\u003c\/h3\u003e\n\u003cp\u003eThe amount depends on the car. Have a full alignment done after fitting to set the camber you want.\u003c\/p\u003e\n\u003ch3\u003eWill they fit my car?\u003c\/h3\u003e\n\u003cp\u003eCheck the bolt size against your strut-to-hub bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141248824,"sku":"HR-6704","price":53.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/6701_1.jpg?v=1678899683"},{"product_id":"hardrace-adjustable-17mm-camber-bolts-2-to-2-degree-range","title":"Hardrace Adjustable 17mm Camber Bolts -2 To +2 Degree Range","description":"\u003ch2\u003eHardrace Adjustable Camber Bolts 17mm – Adjustable Camber\u003c\/h2\u003e\n\u003cp\u003eMany cars have no factory camber adjustment on the strut. These Hardrace adjustable camber bolts fit in place of the strut-to-hub bolts and let you adjust camber, so you can dial in the alignment after lowering for even tyre wear and more grip.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdds camber adjustment at the strut\u003c\/li\u003e\n\u003cli\u003eEven tyre wear and more grip after lowering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable camber bolts 17mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eUniversal. Suits struts that use 17mm strut-to-hub bolts. Measure your bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, remove the wheel and swap one of the strut-to-hub bolts at a time for a Hardrace camber bolt. Set the camber, tighten to the vehicle manufacturer's torque figures and have a full alignment done. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-12mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 12mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-14mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 14mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-15mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 15mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow much camber do they add?\u003c\/h3\u003e\n\u003cp\u003eThe amount depends on the car. Have a full alignment done after fitting to set the camber you want.\u003c\/p\u003e\n\u003ch3\u003eWill they fit my car?\u003c\/h3\u003e\n\u003cp\u003eCheck the bolt size against your strut-to-hub bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141281592,"sku":"HR-6705","price":53.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/6700_3.jpg?v=1678899683"},{"product_id":"hardrace-rear-camber-toe-adjustable-spacer-red-camber-1-5-1-5-toe-1-5-1-5-2pcs-set","title":"Hardrace Rear Camber\/Toe Adjustable Spacer Red Camber\/Toe -1.5 -1.5 2Pcs","description":"\u003ch2\u003eHardrace Rear Camber\/Toe Adjustable Spacer Red Camber\/Toe -1.5 -1.5 – Corrects Rear Camber And Toe\u003c\/h2\u003e\n\u003cp\u003eLowering a car changes the rear alignment, often with no factory adjustment to correct it. This Hardrace adjusting spacer set corrects the camber and toe, for better tyre wear and more grip.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCorrects rear camber and toe\u003c\/li\u003e\n\u003cli\u003eBetter tyre wear and more grip\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eCheck the size and fitment against your car before ordering, or contact us if you are unsure.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely. Remove the factory part and fit the Hardrace part in its place, tightening all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height. Have the alignment checked after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141314360,"sku":"HR-6780","price":58.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hardrace-placeholder_6ed62565-b2f7-465c-b239-3d9155278135.jpg?v=1678899683"},{"product_id":"hardrace-rear-camber-toe-adjustable-spacer-blue-camber-1-5-1-5-toe-1-5-1-5-2pcs-set","title":"Hardrace Rear Camber\/Toe Adjustable Spacer Blue Camber\/Toe -1.5 -1.5 2Pcs","description":"\u003ch2\u003eHardrace Rear Camber\/Toe Adjustable Spacer Blue Camber\/Toe -1.5 -1.5 – Corrects Rear Camber And Toe\u003c\/h2\u003e\n\u003cp\u003eLowering a car changes the rear alignment, often with no factory adjustment to correct it. This Hardrace adjusting spacer set corrects the camber and toe, for better tyre wear and more grip.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCorrects rear camber and toe\u003c\/li\u003e\n\u003cli\u003eBetter tyre wear and more grip\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eCheck the size and fitment against your car before ordering, or contact us if you are unsure.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely. Remove the factory part and fit the Hardrace part in its place, tightening all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height. Have the alignment checked after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141379896,"sku":"HR-7485","price":48.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hardrace-placeholder_f89ffe91-cd0a-44f7-9d20-d02f44a769de.jpg?v=1678899685"}],"url":"https:\/\/hardraceshop.com\/collections\/hardrace-mitsubishi-lancer-evo-suspension-parts.oembed","provider":"Hardrace Shop","version":"1.0","type":"link"}