{"title":"Hardrace Suzuki Jimny Suspension Parts","description":"\u003cp\u003eHardrace \u003ca href=\"\/collections\/hardrace-suzuki-suspension-components\"\u003eSuzuki\u003c\/a\u003e Jimny suspension parts are aimed squarely at the lifted truck: adjustable radius arms, Panhard rods, a rear 4-link arm kit, a 30mm front anti roll bar and a full set of skid plates for the 2018 onwards Jimny, plus radius arms, Panhard rods and control arm bushes for the 1998-2018 Jimny.\u003c\/p\u003e\u003cp\u003eA 2 or 3 inch lift moves the axles off their designed arc, so the 3 inch lift radius arms, adjustable front radius arm, Panhard rod extension brackets and reverse tie rod end put axle location and steering geometry back where they belong, in hardened rubber for a quieter ride or rubber pillow ball for tighter axle control. The anti roll bar relocation kit and quick disconnect front anti roll bar keep roll control on the road and free the axle off it, extended bump stops and headlight levelling brackets finish the lift, and skid plates cover the fuel tank, transfer box, control arms and shock absorbers.\u003c\/p\u003e\u003cp\u003eFor the 1998-2018 Jimny the Pickup Series front Panhard rod, spherical front lower arm bushes and offset radius arm bushes replace worn originals. Use the registration lookup to filter to your year. Worldwide shipping available.\u003c\/p\u003e","products":[{"product_id":"hardrace-adjustable-front-lateral-arm-1pc-set-suzuki-jimny-00","title":"Hardrace Adjustable Front Lateral Arm Suzuki Jimny 00-18","description":"\u003ch2\u003eHardrace Front Upper Arm Bushes for Honda Civic (1987-2001), Honda CRX Del Sol (1992-1998) and Honda Integra (1994-2001) – Firmer Location, Sharper Handling\u003c\/h2\u003e\n\u003cp\u003eFactory suspension bushes are built for comfort, so they flex under cornering, braking and acceleration and let the suspension move around. These Hardrace front upper arm bushes are a firmer upgrade that fits into the factory parts, so the suspension is located more precisely and the car feels sharper and more consistent.\u003c\/p\u003e\n\u003cp\u003eOn a Civic or Integra, firmer bushes are one of the most effective chassis upgrades for sharper turn-in and a more planted feel on fast roads and track days.\u003c\/p\u003e\n\u003cp\u003eThey are made from hardened rubber, a high-strength, anti-crack compound that is firmer than the factory bushes but still absorbs vibration. The offset design lets you adjust the geometry, adding caster for more stable steering.\u003c\/p\u003e\n\u003cp\u003eIt suits the Honda Civic (1987-2001), Honda CRX Del Sol (1992-1998) and Honda Integra (1994-2001).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer than the factory bushes\u003c\/li\u003e\n\u003cli\u003eSharper, more consistent handling\u003c\/li\u003e\n\u003cli\u003eHardened rubber: firm but still absorbs vibration\u003c\/li\u003e\n\u003cli\u003eOffset design for geometry adjustment\u003c\/li\u003e\n\u003cli\u003e4-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront upper arm bushes (4 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHonda \/ CRX Del Sol \/ 1992-1998\u003c\/li\u003e\n\u003cli\u003eHonda \/ Civic 2-Door Coupe \/ 1994-1996\u003c\/li\u003e\n\u003cli\u003eHonda \/ Civic 3-Door Hatchback \/ 1987-1996\u003c\/li\u003e\n\u003cli\u003eHonda \/ Civic 4-Door Sedan \/ 1987-1996\u003c\/li\u003e\n\u003cli\u003eHonda \/ Civic 5-Door Hatchback \/ 1995-2001\u003c\/li\u003e\n\u003cli\u003eHonda \/ Civic CRX \/ 1987-1992\u003c\/li\u003e\n\u003cli\u003eHonda \/ Integra 3-Door \/ 1994-2001\u003c\/li\u003e\n\u003cli\u003eHonda \/ Integra 4-Door \/ 1994-2001\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe bushes press into the factory parts, so the part needs removing from the car and a hydraulic press is needed to press the old bushes out and the new Hardrace bushes in. Refit the part and tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need a press?\u003c\/h3\u003e\n\u003cp\u003eYes. The old bushes must be pressed out and the new ones pressed in with a hydraulic press.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes, have a full four-wheel alignment done after fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eOnly slightly. The hardened rubber is firmer than the factory bushes but still absorbs vibration, so it stays comfortable for everyday driving.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44779982586168,"sku":"HR-6944","price":110.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20188311024110g24j1uu.jpg?v=1678897610"},{"product_id":"hardrace-adjustable-rear-lateral-arm-1pc-set-suzuki-jimny-00","title":"Hardrace Adjustable Rear Lateral Arm Suzuki Jimny 00-18","description":"\u003ch2\u003eHardrace Front Strut Brace for Subaru Impreza GT\/GK (2016-2023), Subaru Forester (2018-2023) and Subaru XV GT (2018-2022) – Sharper Steering, Stiffer Front End\u003c\/h2\u003e\n\u003cp\u003eUnder hard cornering the front strut towers flex, which blurs steering feel and lets the suspension geometry shift. This Hardrace front strut brace ties them together, so the front end stays stiff and the steering stays sharp and precise.\u003c\/p\u003e\n\u003cp\u003eIt bolts to existing mounting points with no cutting or drilling.\u003c\/p\u003e\n\u003cp\u003eOn the Impreza, WRX and their Subaru siblings, extra bracing sharpens the steering and helps the all-wheel-drive chassis feel more planted.\u003c\/p\u003e\n\u003cp\u003eIt suits the Subaru Impreza GT\/GK (2016-2023), Subaru Forester (2018-2023) and Subaru XV GT (2018-2022).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTies the strut towers together\u003c\/li\u003e\n\u003cli\u003eReduces body flex under cornering\u003c\/li\u003e\n\u003cli\u003eSharper, more precise steering\u003c\/li\u003e\n\u003cli\u003eBolts to existing mounting points\u003c\/li\u003e\n\u003cli\u003eNo cutting or drilling required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront strut brace\u003c\/li\u003e\n\u003cli\u003eFitting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubaru \/ Impreza (5th Gen) 2016-2023 \/ Hatchback (GT) 2016-2023 \/ Impreza 1.6 (GT3) 2016-2023\u003c\/li\u003e\n\u003cli\u003eSubaru \/ Impreza (5th Gen) 2016-2023 \/ Hatchback (GT) 2016-2023 \/ Impreza 2.0 (GT7) 2016-2023\u003c\/li\u003e\n\u003cli\u003eSubaru \/ Impreza (5th Gen) 2016-2023 \/ Sedan (GK) 2016-2023 \/ Impreza 1.6 (GK3) 2016-2023\u003c\/li\u003e\n\u003cli\u003eSubaru \/ Impreza (5th Gen) 2016-2023 \/ Sedan (GK) 2016-2023 \/ Impreza 2.0 (GK7) 2016-2023\u003c\/li\u003e\n\u003cli\u003eSubaru \/ Forester (5th Gen) 2018-2023 \/ Forester (5th Gen) 2018-2023 \/ Forester 1.8 Turbo (AWD)  (177HP\/130KW) 2020-2023\u003c\/li\u003e\n\u003cli\u003eSubaru \/ Forester (5th Gen) 2018-2023 \/ Forester (5th Gen) 2018-2023 \/ Forester 2.0  (AWD)  (148HP\/109KW) 2018-2023\u003c\/li\u003e\n\u003cli\u003eSubaru \/ Forester (5th Gen) 2018-2023 \/ Forester (5th Gen) 2018-2023 \/ Forester 2.5  (AWD)  (182HP\/136KW) 2019-2023\u003c\/li\u003e\n\u003cli\u003eSubaru \/ XV (2nd Gen) 2018-2022 \/ SUV (GT) 2018-2022 \/ XV 1.6 (AWD) 2018-2022\u003c\/li\u003e\n\u003cli\u003eSubaru \/ XV (2nd Gen) 2018-2022 \/ SUV (GT) 2018-2022 \/ XV 2.0 (AWD) 2018-2022\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eRemove the strut top nuts or mounting bolts, fit the brace over them and refit the nuts. Tighten to the vehicle manufacturer's torque figures with the car on its wheels, then check clearance around the bonnet and engine bay before driving. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. The brace does not change the suspension geometry.\u003c\/p\u003e\n\u003ch3\u003eWill it fit under the bonnet?\u003c\/h3\u003e\n\u003cp\u003eYes, it is designed to fit under the standard bonnet on the listed models. Check clearance around any aftermarket intake or engine parts.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eNo. A brace stiffens the chassis, not the suspension, so the ride comfort is largely unchanged.\u003c\/p\u003e\n\u003ch3\u003eCan I fit it with other braces?\u003c\/h3\u003e\n\u003cp\u003eYes. Combining front, middle and rear braces stiffens more of the chassis for an even tighter feel.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780082430264,"sku":"HR-6945","price":141.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20186131026310p26v3hw.jpg?v=1678899057"},{"product_id":"hardrace-front-panhard-rod-harden-rubber-1-piece-set-for-rhd-use-suzuki-jimny-18","title":"Hardrace Front Panhard Rod Harden Rubber RHD Suzuki Jimny 18+","description":"\u003ch2\u003eHardrace Front Panhard Rod for Suzuki Jimny JB64 (2018-Present) – Keeps the Axle Centred\u003c\/h2\u003e\n\u003cp\u003eThe panhard rod locates the axle sideways. Lifting a vehicle shifts the axle off-centre, which upsets the handling. This Hardrace front panhard rod is an upgrade built to keep the axle centred on lifted vehicles, with a stronger construction for off-road use.\u003c\/p\u003e\n\u003cp\u003eIt uses hardened rubber bushes, firmer than standard but still able to absorb vibration. This version is for RHD vehicles.\u003c\/p\u003e\n\u003cp\u003eIt suits the Suzuki Jimny JB64 (2018-Present).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKeeps the axle centred\u003c\/li\u003e\n\u003cli\u003eStronger than standard for off-road use\u003c\/li\u003e\n\u003cli\u003eHardened rubber bushes\u003c\/li\u003e\n\u003cli\u003eRHD version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront panhard rod\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5 2018-Present\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5D 2018-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e For rhd car use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the vehicle safely on axle stands or a ramp. Remove the factory part and fit the Hardrace part in its place. Tighten all fixings to the vehicle manufacturer's torque figures with the vehicle on its wheels at normal ride height, so the bushes aren't pre-loaded. Check the steering is centred and have the alignment checked after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-front-panhard-rod-hardened-rubber-1pcs-set-for-lhd-use\"\u003eHardrace Front Panhard Rod Hardened Rubber 1Pcs Suzuki Jimny 18+ LHD\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-steering-stabilizer-1pcs-set\"\u003eHardrace Steering Stabilizer 1Pcs Suzuki Jimny 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-98-18-18-front-adjustable-radius-arm-hardened-rubber-2pcs-set-lift-3-inches\"\u003eHardrace Front Adjustable Radius Arm Hardened Rubber 2Pcs Suzuki Jimny 98-18 18+ Lift 3 In\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes, have a full alignment done after fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eOnly slightly. The hardened rubber is firmer than standard but still absorbs vibration, so it stays comfortable for everyday driving.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780094587192,"sku":"HR-Q0386","price":199.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hardrace-part-q0386.jpg?v=1678899192"},{"product_id":"hardrace-pickup-series-front-panhard-rod-1pc-suzuki-jimny-98-18","title":"Hardrace Pickup Series Front Panhard Rod Suzuki Jimny 98-18","description":"\u003ch2\u003eHardrace Front Panhard Rod for Suzuki Jimny JB23 (1998-2018) – Keeps the Axle Centred\u003c\/h2\u003e\n\u003cp\u003eThe panhard rod locates the axle sideways. Lifting a vehicle shifts the axle off-centre, which upsets the handling. This Hardrace front panhard rod is an upgrade built to keep the axle centred on lifted vehicles, with a stronger construction for off-road use.\u003c\/p\u003e\n\u003cp\u003eIt uses hardened rubber bushes, firmer than standard but still able to absorb vibration.\u003c\/p\u003e\n\u003cp\u003eIt suits the Suzuki Jimny JB23 (1998-2018).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKeeps the axle centred\u003c\/li\u003e\n\u003cli\u003eStronger than standard for off-road use\u003c\/li\u003e\n\u003cli\u003eHardened rubber bushes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront panhard rod\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB23\/33\/43\/53) 1998-2018 \/ Jimny 1.3 1998-2018\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB23\/33\/43\/53) 1998-2018 \/ Jimny 1.5TD 1998-2018\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the vehicle safely on axle stands or a ramp. Remove the factory part and fit the Hardrace part in its place. Tighten all fixings to the vehicle manufacturer's torque figures with the vehicle on its wheels at normal ride height, so the bushes aren't pre-loaded. Check the steering is centred and have the alignment checked after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-98-18-18-rear-panhard-rod-v2-hardened-rubber-pillow-ball-1pcs-set\"\u003eHardrace Rear Panhard Rod V2 Hardened Rubber Pillow Ball 1Pcs Suzuki Jimny 98-18 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-98-18-18-front-radius-arm-for-3-lift-hardened-rubber-2pcs-set\"\u003eHardrace Front Radius Arm For 3\" Lift Hardened Rubber 2Pcs Suzuki Jimny 98-18 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-98-18-18-rear-radius-arm-for-3-lift-hardened-rubber-2pcs-set\"\u003eHardrace Rear Radius Arm For 3\" Lift Hardened Rubber 2Pcs Suzuki Jimny 98-18 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes, have a full alignment done after fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eOnly slightly. The hardened rubber is firmer than standard but still absorbs vibration, so it stays comfortable for everyday driving.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780094619960,"sku":"HR-Q0105","price":199.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20188917182417x18l24sp.jpg?v=1678899192"},{"product_id":"hardrace-suzuki-jimny-18-front-panhard-rod-hardened-rubber-1pcs-set-for-lhd-use","title":"Hardrace Front Panhard Rod Hardened Rubber Suzuki Jimny 18+ LHD","description":"\u003ch2\u003eHardrace Front Panhard Rod for Suzuki Jimny JB64 (2018-Present) – Keeps the Axle Centred\u003c\/h2\u003e\n\u003cp\u003eThe panhard rod locates the axle sideways. Lifting a vehicle shifts the axle off-centre, which upsets the handling. This Hardrace front panhard rod is an upgrade built to keep the axle centred on lifted vehicles, with a stronger construction for off-road use.\u003c\/p\u003e\n\u003cp\u003eIt uses hardened rubber bushes, firmer than standard but still able to absorb vibration. This version is for LHD vehicles.\u003c\/p\u003e\n\u003cp\u003eIt suits the Suzuki Jimny JB64 (2018-Present).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKeeps the axle centred\u003c\/li\u003e\n\u003cli\u003eStronger than standard for off-road use\u003c\/li\u003e\n\u003cli\u003eHardened rubber bushes\u003c\/li\u003e\n\u003cli\u003eLHD version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront panhard rod\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5 2018-Present\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5D 2018-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e For lhd car use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the vehicle safely on axle stands or a ramp. Remove the factory part and fit the Hardrace part in its place. Tighten all fixings to the vehicle manufacturer's torque figures with the vehicle on its wheels at normal ride height, so the bushes aren't pre-loaded. Check the steering is centred and have the alignment checked after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-front-panhard-rod-harden-rubber-1-piece-set-for-rhd-use-suzuki-jimny-18\"\u003eHardrace Front Panhard Rod Harden Rubber 1 Piece Set RHD Suzuki Jimny 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-steering-stabilizer-1pcs-set\"\u003eHardrace Steering Stabilizer 1Pcs Suzuki Jimny 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-98-18-18-front-adjustable-radius-arm-hardened-rubber-2pcs-set-lift-3-inches\"\u003eHardrace Front Adjustable Radius Arm Hardened Rubber 2Pcs Suzuki Jimny 98-18 18+ Lift 3 In\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes, have a full alignment done after fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eOnly slightly. The hardened rubber is firmer than standard but still absorbs vibration, so it stays comfortable for everyday driving.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780094652728,"sku":"HR-Q0555","price":199.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0555_main_1.jpg?v=1678899192"},{"product_id":"hardrace-suzuki-jimny-98-18-18-front-radius-arm-for-3-lift-hardened-rubber-2pcs-set","title":"Hardrace Front Radius Arm For 3\" Lift Hardened Rubber Suzuki Jimny 98-18","description":"\u003ch2\u003eHardrace Front Radius Arms 2-3in Lift Hardened Rubber for Suzuki Jimny JB23\/JB64 (1998-Present) – Firmer Location, Sharper Handling\u003c\/h2\u003e\n\u003cp\u003eThe radius arms locate the axle, and soft factory bushes let it shift under load, especially with bigger tyres or a lift. These Hardrace front radius arms are an upgrade over the factory parts. Each one locates the suspension far more firmly, so the car feels sharper and more consistent through corners and over bumps.\u003c\/p\u003e\n\u003cp\u003eThey use hardened rubber bushes, a high-strength, anti-crack compound that is firmer than the factory bushes but still absorbs vibration. It is designed for cars lifted 2-3 inches.\u003c\/p\u003e\n\u003cp\u003eIt suits the Suzuki Jimny 1998-Present.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer suspension location than the factory arms\u003c\/li\u003e\n\u003cli\u003eSharper, more consistent handling\u003c\/li\u003e\n\u003cli\u003eHardened rubber bushes for firm, quiet control\u003c\/li\u003e\n\u003cli\u003eHigh-strength steel construction\u003c\/li\u003e\n\u003cli\u003eSupplied complete with bushes or joints fitted, so no press is needed\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003eDesigned for 2-3 inch lifted cars\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront radius arms (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB23\/33\/43\/53) 1998-2018 \/ Jimny 1.3 1998-2018\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB23\/33\/43\/53) 1998-2018 \/ Jimny 1.5TD 1998-2018\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5 2018-Present\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5D 2018-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on axle stands or a ramp. Remove the factory arm and bolt the Hardrace arm in its place; it comes complete with its bushes or joints fitted, so no press is needed. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-pickup-series-front-panhard-rod-1pc-suzuki-jimny-98-18\"\u003eHardrace Pickup Series Front Panhard Rod 1Pc Suzuki Jimny 98-18\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-98-18-18-rear-panhard-rod-v2-hardened-rubber-pillow-ball-1pcs-set\"\u003eHardrace Rear Panhard Rod V2 Hardened Rubber Pillow Ball 1Pcs Suzuki Jimny 98-18 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-98-18-18-rear-radius-arm-for-3-lift-hardened-rubber-2pcs-set\"\u003eHardrace Rear Radius Arm For 3\" Lift Hardened Rubber 2Pcs Suzuki Jimny 98-18 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes. Have a full four-wheel alignment done after fitting.\u003c\/p\u003e\n\u003ch3\u003eDoes it come with the bushes fitted?\u003c\/h3\u003e\n\u003cp\u003eYes. The arm comes complete with its bushes or joints already fitted, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eOnly slightly. The hardened rubber is firmer than the factory bushes but still absorbs vibration, so it stays comfortable for everyday driving.\u003c\/p\u003e\n\u003ch3\u003eIs it suitable for a lifted car?\u003c\/h3\u003e\n\u003cp\u003eYes. It is designed for cars lifted 2-3 inches and helps correct the geometry after lifting.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. For 3\" Lift. For 2~3\" Lift.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780094685496,"sku":"HR-Q0560","price":319.26,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0560_main.jpg?v=1678899193"},{"product_id":"hardrace-suzuki-jimny-98-18-18-rear-radius-arm-for-3-lift-hardened-rubber-2pcs-set","title":"Hardrace Rear Radius Arm For 3\" Lift Hardened Rubber Suzuki Jimny 98-18 18+","description":"\u003ch2\u003eHardrace Rear Radius Arms 2-3in Lift Hardened Rubber for Suzuki Jimny JB23\/JB64 (1998-Present) – Firmer Location, Sharper Handling\u003c\/h2\u003e\n\u003cp\u003eThe radius arms locate the axle, and soft factory bushes let it shift under load, especially with bigger tyres or a lift. These Hardrace rear radius arms are an upgrade over the factory parts. Each one locates the suspension far more firmly, so the car feels sharper and more consistent through corners and over bumps.\u003c\/p\u003e\n\u003cp\u003eThey use hardened rubber bushes, a high-strength, anti-crack compound that is firmer than the factory bushes but still absorbs vibration. It is designed for cars lifted 2-3 inches.\u003c\/p\u003e\n\u003cp\u003eIt suits the Suzuki Jimny 1998-Present.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer suspension location than the factory arms\u003c\/li\u003e\n\u003cli\u003eSharper, more consistent handling\u003c\/li\u003e\n\u003cli\u003eHardened rubber bushes for firm, quiet control\u003c\/li\u003e\n\u003cli\u003eHigh-strength steel construction\u003c\/li\u003e\n\u003cli\u003eSupplied complete with bushes or joints fitted, so no press is needed\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003eDesigned for 2-3 inch lifted cars\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear radius arms (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB23\/33\/43\/53) 1998-2018 \/ Jimny 1.3 1998-2018\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB23\/33\/43\/53) 1998-2018 \/ Jimny 1.5TD 1998-2018\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5 2018-Present\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5D 2018-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on axle stands or a ramp. Remove the factory arm and bolt the Hardrace arm in its place; it comes complete with its bushes or joints fitted, so no press is needed. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-pickup-series-front-panhard-rod-1pc-suzuki-jimny-98-18\"\u003eHardrace Pickup Series Front Panhard Rod 1Pc Suzuki Jimny 98-18\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-98-18-18-rear-panhard-rod-v2-hardened-rubber-pillow-ball-1pcs-set\"\u003eHardrace Rear Panhard Rod V2 Hardened Rubber Pillow Ball 1Pcs Suzuki Jimny 98-18 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-98-18-18-front-radius-arm-for-3-lift-hardened-rubber-2pcs-set\"\u003eHardrace Front Radius Arm For 3\" Lift Hardened Rubber 2Pcs Suzuki Jimny 98-18 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes. Have a full four-wheel alignment done after fitting.\u003c\/p\u003e\n\u003ch3\u003eDoes it come with the bushes fitted?\u003c\/h3\u003e\n\u003cp\u003eYes. The arm comes complete with its bushes or joints already fitted, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eOnly slightly. The hardened rubber is firmer than the factory bushes but still absorbs vibration, so it stays comfortable for everyday driving.\u003c\/p\u003e\n\u003ch3\u003eIs it suitable for a lifted car?\u003c\/h3\u003e\n\u003cp\u003eYes. It is designed for cars lifted 2-3 inches and helps correct the geometry after lifting.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. For 3\" Lift. For 2~3\" Lift.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780094718264,"sku":"HR-Q0561","price":319.26,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0561_main.jpg?v=1678899195"},{"product_id":"hardrace-suzuki-jimny-98-18-18-rear-panhard-rod-v2-hardened-rubber-pillow-ball-1pcs-set","title":"Hardrace Rear Panhard Rod V2 Hardened Rubber Pillow Ball Suzuki Jimny 98+","description":"\u003ch2\u003eHardrace Rear Panhard Rod for Suzuki Jimny JB23\/JB64 (1998-Present) – Keeps the Axle Centred\u003c\/h2\u003e\n\u003cp\u003eThe panhard rod locates the axle sideways. Lifting a vehicle shifts the axle off-centre, which upsets the handling. This Hardrace rear panhard rod is an upgrade built to keep the axle centred on lifted vehicles, with a stronger construction for off-road use.\u003c\/p\u003e\n\u003cp\u003eIt combines a pillow ball joint with a hardened rubber bush, for precise location with some vibration isolation.\u003c\/p\u003e\n\u003cp\u003eIt suits the Suzuki Jimny JB23\/JB64 (1998-Present).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKeeps the axle centred\u003c\/li\u003e\n\u003cli\u003eStronger than standard for off-road use\u003c\/li\u003e\n\u003cli\u003ePillow ball and hardened rubber\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear panhard rod\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB23\/33\/43\/53) 1998-2018 \/ Jimny 1.3 1998-2018\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB23\/33\/43\/53) 1998-2018 \/ Jimny 1.5TD 1998-2018\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5 2018-Present\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5D 2018-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the vehicle safely on axle stands or a ramp. Remove the factory part and fit the Hardrace part in its place. Tighten all fixings to the vehicle manufacturer's torque figures with the vehicle on its wheels at normal ride height, so the bushes aren't pre-loaded. Check the steering is centred and have the alignment checked after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-pickup-series-front-panhard-rod-1pc-suzuki-jimny-98-18\"\u003eHardrace Pickup Series Front Panhard Rod 1Pc Suzuki Jimny 98-18\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-98-18-18-front-radius-arm-for-3-lift-hardened-rubber-2pcs-set\"\u003eHardrace Front Radius Arm For 3\" Lift Hardened Rubber 2Pcs Suzuki Jimny 98-18 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-98-18-18-rear-radius-arm-for-3-lift-hardened-rubber-2pcs-set\"\u003eHardrace Rear Radius Arm For 3\" Lift Hardened Rubber 2Pcs Suzuki Jimny 98-18 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes, have a full alignment done after fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780094751032,"sku":"HR-Q0637","price":199.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0637_main.jpg?v=1678899196"},{"product_id":"hardrace-suzuki-jimny-98-18-18-front-radius-arm-for-3-lift-hardened-rubber-pillow-ball-2pcs-set","title":"Hardrace Front Radius Arm For 3\" Lift Rubber Pillow Ball Suzuki 98+","description":"\u003ch2\u003eHardrace Front Radius Arms 2-3in Lift Pillow Ball \u0026amp; Rubber for Suzuki Jimny JB23\/JB64 (1998-Present) – Firmer Location, Sharper Handling\u003c\/h2\u003e\n\u003cp\u003eThe radius arms locate the axle, and soft factory bushes let it shift under load, especially with bigger tyres or a lift. These Hardrace front radius arms are an upgrade over the factory parts. Each one locates the suspension far more firmly, so the car feels sharper and more consistent through corners and over bumps.\u003c\/p\u003e\n\u003cp\u003eThey use a mix of pillow ball and hardened rubber bushes. It is designed for cars lifted 2-3 inches.\u003c\/p\u003e\n\u003cp\u003eIt suits the Suzuki Jimny 1998-Present.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer suspension location than the factory arms\u003c\/li\u003e\n\u003cli\u003eSharper, more consistent handling\u003c\/li\u003e\n\u003cli\u003ePillow ball and hardened rubber bushes\u003c\/li\u003e\n\u003cli\u003eHigh-strength steel construction\u003c\/li\u003e\n\u003cli\u003eSupplied complete with bushes or joints fitted, so no press is needed\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003eDesigned for 2-3 inch lifted cars\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront radius arms (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB23\/33\/43\/53) 1998-2018 \/ Jimny 1.3 1998-2018\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB23\/33\/43\/53) 1998-2018 \/ Jimny 1.5TD 1998-2018\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5 2018-Present\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5D 2018-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on axle stands or a ramp. Remove the factory arm and bolt the Hardrace arm in its place; it comes complete with its bushes or joints fitted, so no press is needed. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-pickup-series-front-panhard-rod-1pc-suzuki-jimny-98-18\"\u003eHardrace Pickup Series Front Panhard Rod 1Pc Suzuki Jimny 98-18\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-98-18-18-rear-panhard-rod-v2-hardened-rubber-pillow-ball-1pcs-set\"\u003eHardrace Rear Panhard Rod V2 Hardened Rubber Pillow Ball 1Pcs Suzuki Jimny 98-18 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-98-18-18-front-radius-arm-for-3-lift-hardened-rubber-2pcs-set\"\u003eHardrace Front Radius Arm For 3\" Lift Hardened Rubber 2Pcs Suzuki Jimny 98-18 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes. Have a full four-wheel alignment done after fitting.\u003c\/p\u003e\n\u003ch3\u003eDoes it come with the bushes fitted?\u003c\/h3\u003e\n\u003cp\u003eYes. The arm comes complete with its bushes or joints already fitted, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eIt is firmer than standard. The pillow ball joints give precise location where it matters most, while the hardened rubber bushes help keep noise and vibration down.\u003c\/p\u003e\n\u003ch3\u003eIs it suitable for a lifted car?\u003c\/h3\u003e\n\u003cp\u003eYes. It is designed for cars lifted 2-3 inches and helps correct the geometry after lifting.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. For 3\" Lift. For 2~3\" Lift.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780094783800,"sku":"HR-Q0689","price":479.02,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0689_main.jpg?v=1678899195"},{"product_id":"hardrace-suzuki-jimny-98-18-18-rear-radius-arm-for-3-lift-hardened-rubber-pillow-ball-2pcs-set","title":"Hardrace Rear Radius Arm For 3\" Lift Hardened Rubber Pillow Ball Suzuki 98+","description":"\u003ch2\u003eHardrace Rear Radius Arms 2-3in Lift Pillow Ball \u0026amp; Rubber for Suzuki Jimny JB23\/JB64 (1998-Present) – Firmer Location, Sharper Handling\u003c\/h2\u003e\n\u003cp\u003eThe radius arms locate the axle, and soft factory bushes let it shift under load, especially with bigger tyres or a lift. These Hardrace rear radius arms are an upgrade over the factory parts. Each one locates the suspension far more firmly, so the car feels sharper and more consistent through corners and over bumps.\u003c\/p\u003e\n\u003cp\u003eThey use a mix of pillow ball and hardened rubber bushes. It is designed for cars lifted 2-3 inches.\u003c\/p\u003e\n\u003cp\u003eIt suits the Suzuki Jimny 1998-Present.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer suspension location than the factory arms\u003c\/li\u003e\n\u003cli\u003eSharper, more consistent handling\u003c\/li\u003e\n\u003cli\u003ePillow ball and hardened rubber bushes\u003c\/li\u003e\n\u003cli\u003eHigh-strength steel construction\u003c\/li\u003e\n\u003cli\u003eSupplied complete with bushes or joints fitted, so no press is needed\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003eDesigned for 2-3 inch lifted cars\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear radius arms (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB23\/33\/43\/53) 1998-2018 \/ Jimny 1.3 1998-2018\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB23\/33\/43\/53) 1998-2018 \/ Jimny 1.5TD 1998-2018\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5 2018-Present\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5D 2018-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on axle stands or a ramp. Remove the factory arm and bolt the Hardrace arm in its place; it comes complete with its bushes or joints fitted, so no press is needed. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-pickup-series-front-panhard-rod-1pc-suzuki-jimny-98-18\"\u003eHardrace Pickup Series Front Panhard Rod 1Pc Suzuki Jimny 98-18\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-98-18-18-rear-panhard-rod-v2-hardened-rubber-pillow-ball-1pcs-set\"\u003eHardrace Rear Panhard Rod V2 Hardened Rubber Pillow Ball 1Pcs Suzuki Jimny 98-18 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-98-18-18-front-radius-arm-for-3-lift-hardened-rubber-2pcs-set\"\u003eHardrace Front Radius Arm For 3\" Lift Hardened Rubber 2Pcs Suzuki Jimny 98-18 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes. Have a full four-wheel alignment done after fitting.\u003c\/p\u003e\n\u003ch3\u003eDoes it come with the bushes fitted?\u003c\/h3\u003e\n\u003cp\u003eYes. The arm comes complete with its bushes or joints already fitted, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eIt is firmer than standard. The pillow ball joints give precise location where it matters most, while the hardened rubber bushes help keep noise and vibration down.\u003c\/p\u003e\n\u003ch3\u003eIs it suitable for a lifted car?\u003c\/h3\u003e\n\u003cp\u003eYes. It is designed for cars lifted 2-3 inches and helps correct the geometry after lifting.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. For 3\" Lift. For 2~3\" Lift.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780094914872,"sku":"HR-Q0690","price":479.02,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0690_main.jpg?v=1678899197"},{"product_id":"hardrace-suzuki-jimny-98-18-18-front-adjustable-radius-arm-hardened-rubber-2pcs-set-lift-3-inches","title":"Hardrace Front Adjustable Radius Arm Hardened Rubber Suzuki Jimny 98-18","description":"\u003ch2\u003eHardrace Adjustable Front Radius Arms Hardened Rubber for Suzuki Jimny JB23\/JB64 (1998-Present) – Adjustable Geometry, Sharper Handling\u003c\/h2\u003e\n\u003cp\u003eThe radius arms locate the axle, and soft factory bushes let it shift under load, especially with bigger tyres or a lift. These Hardrace front radius arms are an upgrade over the factory parts. Each one locates the suspension far more firmly, so the car feels sharper and more consistent through corners and over bumps.\u003c\/p\u003e\n\u003cp\u003eThey use hardened rubber bushes, a high-strength, anti-crack compound that is firmer than the factory bushes but still absorbs vibration. The length is adjustable, so you can fine-tune the geometry.\u003c\/p\u003e\n\u003cp\u003eIt suits the Suzuki Jimny 1998-Present.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer suspension location than the factory arms\u003c\/li\u003e\n\u003cli\u003eSharper, more consistent handling\u003c\/li\u003e\n\u003cli\u003eAdjustable length to fine-tune the geometry\u003c\/li\u003e\n\u003cli\u003eHardened rubber bushes for firm, quiet control\u003c\/li\u003e\n\u003cli\u003eHigh-strength steel construction\u003c\/li\u003e\n\u003cli\u003eSupplied complete with bushes or joints fitted, so no press is needed\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront radius arms (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB23\/33\/43\/53) 1998-2018 \/ Jimny 1.3 1998-2018\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB23\/33\/43\/53) 1998-2018 \/ Jimny 1.5TD 1998-2018\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5 2018-Present\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5D 2018-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on axle stands or a ramp. Remove the factory arm and bolt the Hardrace arm in its place; it comes complete with its bushes or joints fitted, so no press is needed. Set adjustable arms to the same length as the factory parts to start. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-front-panhard-rod-harden-rubber-1-piece-set-for-rhd-use-suzuki-jimny-18\"\u003eHardrace Front Panhard Rod Harden Rubber 1 Piece Set RHD Suzuki Jimny 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-front-panhard-rod-hardened-rubber-1pcs-set-for-lhd-use\"\u003eHardrace Front Panhard Rod Hardened Rubber 1Pcs Suzuki Jimny 18+ LHD\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-steering-stabilizer-1pcs-set\"\u003eHardrace Steering Stabilizer 1Pcs Suzuki Jimny 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes. Have a full four-wheel alignment done after fitting, and use it to set the adjustable arms to the settings you want.\u003c\/p\u003e\n\u003ch3\u003eDoes it come with the bushes fitted?\u003c\/h3\u003e\n\u003cp\u003eYes. The arm comes complete with its bushes or joints already fitted, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eOnly slightly. The hardened rubber is firmer than the factory bushes but still absorbs vibration, so it stays comfortable for everyday driving.\u003c\/p\u003e\n\u003ch3\u003eHow is it adjusted?\u003c\/h3\u003e\n\u003cp\u003eThe arm length is set with the adjuster and locked with lock nuts. Set it to the factory length first, then fine-tune it during the alignment.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. For 3\" Lift.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780094980408,"sku":"HR-Q0866","price":399.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0866_main_1.jpg?v=1678899198"},{"product_id":"hardrace-suzuki-jimny-18-rear-panhard-rod-extention-bracket-1pcs-set-for-3-lift","title":"Hardrace Rear Panhard Rod Extention Bracket Suzuki Jimny 18+ For 3\" Lift","description":"\u003ch2\u003eHardrace Rear Panhard Rod Extension Bracket for Suzuki Jimny JB64 (2018-Present) – Corrects Geometry on Lifted Vehicles\u003c\/h2\u003e\n\u003cp\u003eThis Hardrace rear panhard rod extension bracket corrects the panhard rod angle on lifted vehicles (3 inch lift), so the axle stays centred and the handling stays settled.\u003c\/p\u003e\n\u003cp\u003eIt suits the Suzuki Jimny JB64 (2018-Present).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCorrects the rod angle on lifted vehicles\u003c\/li\u003e\n\u003cli\u003eKeeps the axle centred\u003c\/li\u003e\n\u003cli\u003eFor 3 inch lifts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear panhard rod extension bracket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5 2018-Present\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5D 2018-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the vehicle safely on axle stands or a ramp. Remove the factory part and fit the Hardrace part in its place. Tighten all fixings to the vehicle manufacturer's torque figures with the vehicle on its wheels at normal ride height, so the bushes aren't pre-loaded. Check the steering is centred and have the alignment checked after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-brake-master-cylinder-stopper-1pcs-set-for-lhd-models\"\u003eHardrace Brake Master Cylinder Stopper 1Pcs Suzuki Jimny 18+ LHD\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-front-panhard-rod-extension-bracket-1pcs-set-for-2-inches-lifted-vehicles\"\u003eHardrace Front Panhard Rod Extension Bracket 1Pcs Suzuki Jimny 18+ For 2 Inches Lifted Veh\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-rear-tow-hook-kit-1pcs-set\"\u003eHardrace Rear Tow Hook Kit 1Pcs Suzuki Jimny 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes, have a full alignment done after fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780095045944,"sku":"HR-Q0750","price":59.87,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0750_main_1.jpg?v=1678899199"},{"product_id":"hardrace-suzuki-jimny-18-at-front-lower-brace-1pcs-set-oe-replacement-for-2-inches-lifted-vehicles","title":"Hardrace Front Lower Brace Suzuki Jimny 18+ AT OE Replacement For 2+","description":"\u003ch2\u003eHardrace Front Lower Brace for Suzuki Jimny JB64 (2018-Present) – Stiffer Chassis, Sharper Handling\u003c\/h2\u003e\n\u003cp\u003eThe floor and lower chassis flex under hard cornering, which lets the suspension geometry move and makes the car feel less precise. This Hardrace front lower brace ties key mounting points under the car together, so the chassis stays stiff and the car feels sharper and more consistent.\u003c\/p\u003e\n\u003cp\u003eIt bolts to existing mounting points with no cutting or drilling.\u003c\/p\u003e\n\u003cp\u003eIt suits the Suzuki Jimny JB64 (2018-Present).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStiffens the lower chassis\u003c\/li\u003e\n\u003cli\u003eReduces body flex under load\u003c\/li\u003e\n\u003cli\u003eSharper, more consistent handling\u003c\/li\u003e\n\u003cli\u003eBolts to existing mounting points\u003c\/li\u003e\n\u003cli\u003eNo cutting or drilling required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront lower brace\u003c\/li\u003e\n\u003cli\u003eFitting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5 2018-Present\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5D 2018-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on a ramp or axle stands. Bolt the brace to the existing mounting points under the car and tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No cutting, drilling or alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-rear-panhard-rod-extention-bracket-1pcs-set-for-3-lift\"\u003eHardrace Rear Panhard Rod Extention Bracket 1Pcs Suzuki Jimny 18+ For 3\" Lift\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-brake-master-cylinder-stopper-1pcs-set-for-lhd-models\"\u003eHardrace Brake Master Cylinder Stopper 1Pcs Suzuki Jimny 18+ LHD\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-front-panhard-rod-extension-bracket-1pcs-set-for-2-inches-lifted-vehicles\"\u003eHardrace Front Panhard Rod Extension Bracket 1Pcs Suzuki Jimny 18+ For 2 Inches Lifted Veh\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. The brace does not change the suspension geometry.\u003c\/p\u003e\n\u003ch3\u003eWill it reduce ground clearance?\u003c\/h3\u003e\n\u003cp\u003eIt sits close to the floor or subframe, so it only reduces ground clearance slightly.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eNo. A brace stiffens the chassis, not the suspension, so the ride comfort is largely unchanged.\u003c\/p\u003e\n\u003ch3\u003eCan I fit it with other braces?\u003c\/h3\u003e\n\u003cp\u003eYes. Combining front, middle and rear braces stiffens more of the chassis for an even tighter feel.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780095013176,"sku":"HR-Q0755","price":159.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0755_main.jpg?v=1678899199"},{"product_id":"hardrace-suzuki-jimny-18-transfer-box-skid-plate-2pcs-set","title":"Hardrace Transfer Box Skid Plate Suzuki Jimny 18+","description":"\u003ch2\u003eHardrace Transfer Box Skid Plate for Suzuki Jimny JB64 (2018-Present) – Protects underbody parts from impacts\u003c\/h2\u003e\n\u003cp\u003eThis Hardrace transfer box skid plate is a tough upgrade that protects vulnerable parts underneath from rocks, debris and impacts off-road or on rough roads.\u003c\/p\u003e\n\u003cp\u003eIt suits the Suzuki Jimny JB64 (2018-Present).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProtects underbody parts from impacts\u003c\/li\u003e\n\u003cli\u003eStrong, durable construction\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTransfer box skid plate (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5 2018-Present\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5D 2018-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the vehicle safely. Remove the factory part where fitted and install the Hardrace part, tightening all fixings to the vehicle manufacturer's torque figures. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-rear-panhard-rod-extention-bracket-1pcs-set-for-3-lift\"\u003eHardrace Rear Panhard Rod Extention Bracket 1Pcs Suzuki Jimny 18+ For 3\" Lift\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-brake-master-cylinder-stopper-1pcs-set-for-lhd-models\"\u003eHardrace Brake Master Cylinder Stopper 1Pcs Suzuki Jimny 18+ LHD\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-front-panhard-rod-extension-bracket-1pcs-set-for-2-inches-lifted-vehicles\"\u003eHardrace Front Panhard Rod Extension Bracket 1Pcs Suzuki Jimny 18+ For 2 Inches Lifted Veh\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780095078712,"sku":"HR-Q0761","price":239.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0761_main.jpg?v=1678899200"},{"product_id":"hardrace-suzuki-jimny-18-carbon-canister-skid-plate-2pcs-set","title":"Hardrace Carbon Canister Skid Plate Suzuki Jimny 18+","description":"\u003ch2\u003eHardrace Carbon Canister Skid Plate for Suzuki Jimny JB64 (2018-Present) – Protects underbody parts from impacts\u003c\/h2\u003e\n\u003cp\u003eThis Hardrace carbon canister skid plate is a tough upgrade that protects vulnerable parts underneath from rocks, debris and impacts off-road or on rough roads.\u003c\/p\u003e\n\u003cp\u003eIt suits the Suzuki Jimny JB64 (2018-Present).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProtects underbody parts from impacts\u003c\/li\u003e\n\u003cli\u003eStrong, durable construction\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon canister skid plate (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5 2018-Present\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5D 2018-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the vehicle safely. Remove the factory part where fitted and install the Hardrace part, tightening all fixings to the vehicle manufacturer's torque figures. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-rear-panhard-rod-extention-bracket-1pcs-set-for-3-lift\"\u003eHardrace Rear Panhard Rod Extention Bracket 1Pcs Suzuki Jimny 18+ For 3\" Lift\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-brake-master-cylinder-stopper-1pcs-set-for-lhd-models\"\u003eHardrace Brake Master Cylinder Stopper 1Pcs Suzuki Jimny 18+ LHD\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-front-panhard-rod-extension-bracket-1pcs-set-for-2-inches-lifted-vehicles\"\u003eHardrace Front Panhard Rod Extension Bracket 1Pcs Suzuki Jimny 18+ For 2 Inches Lifted Veh\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780095111480,"sku":"HR-Q0762","price":159.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0762_main.jpg?v=1678899202"},{"product_id":"hardrace-suzuki-jimny-18-control-arm-skid-plate-4pcs-set","title":"Hardrace Control Arm Skid Plate Suzuki Jimny 18+","description":"\u003ch2\u003eHardrace Control Arm Skid Plates for Suzuki Jimny JB64 (2018-Present) – Tough Underbody Protection\u003c\/h2\u003e\n\u003cp\u003eThe lower arms sit low and are easy to damage on rough tracks and rocks. These Hardrace control arm skid plates bolt underneath the lower arms to shield them from rocks and impacts, so you can drive rough ground with more confidence.\u003c\/p\u003e\n\u003cp\u003eIt suits the Suzuki Jimny 2018-Present.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShields the lower arms from rocks and impacts\u003c\/li\u003e\n\u003cli\u003eBolts on using existing mounting points\u003c\/li\u003e\n\u003cli\u003eStrong steel construction\u003c\/li\u003e\n\u003cli\u003eIdeal for off-road and overland use\u003c\/li\u003e\n\u003cli\u003e4-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSkid plates (4 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5 2018-Present\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5D 2018-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eBolt the skid plate to the underside of the lower arm using the mounting points provided. Tighten all fixings securely and check clearance through full suspension travel. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-rear-panhard-rod-extention-bracket-1pcs-set-for-3-lift\"\u003eHardrace Rear Panhard Rod Extention Bracket 1Pcs Suzuki Jimny 18+ For 3\" Lift\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-brake-master-cylinder-stopper-1pcs-set-for-lhd-models\"\u003eHardrace Brake Master Cylinder Stopper 1Pcs Suzuki Jimny 18+ LHD\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-front-panhard-rod-extension-bracket-1pcs-set-for-2-inches-lifted-vehicles\"\u003eHardrace Front Panhard Rod Extension Bracket 1Pcs Suzuki Jimny 18+ For 2 Inches Lifted Veh\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. For 3-Door Models Only.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780095144248,"sku":"HR-Q0763","price":179.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0763_main_1.jpg?v=1678899202"},{"product_id":"hardrace-suzuki-jimny-18-rear-shock-absorber-skid-plate-2pcs-set","title":"Hardrace Rear Shock Absorber Skid Plate Suzuki Jimny 18+","description":"\u003ch2\u003eHardrace Rear Shock Absorber Skid Plate for Suzuki Jimny JB64 (2018-Present) – Protects underbody parts from impacts\u003c\/h2\u003e\n\u003cp\u003eThis Hardrace rear shock absorber skid plate is a tough upgrade that protects vulnerable parts underneath from rocks, debris and impacts off-road or on rough roads.\u003c\/p\u003e\n\u003cp\u003eIt suits the Suzuki Jimny JB64 (2018-Present).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProtects underbody parts from impacts\u003c\/li\u003e\n\u003cli\u003eStrong, durable construction\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear shock absorber skid plate (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5 2018-Present\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5D 2018-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the vehicle safely. Remove the factory part where fitted and install the Hardrace part, tightening all fixings to the vehicle manufacturer's torque figures. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-rear-panhard-rod-extention-bracket-1pcs-set-for-3-lift\"\u003eHardrace Rear Panhard Rod Extention Bracket 1Pcs Suzuki Jimny 18+ For 3\" Lift\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-brake-master-cylinder-stopper-1pcs-set-for-lhd-models\"\u003eHardrace Brake Master Cylinder Stopper 1Pcs Suzuki Jimny 18+ LHD\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-front-panhard-rod-extension-bracket-1pcs-set-for-2-inches-lifted-vehicles\"\u003eHardrace Front Panhard Rod Extension Bracket 1Pcs Suzuki Jimny 18+ For 2 Inches Lifted Veh\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780095209784,"sku":"HR-Q0764","price":99.89,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0764_main_1.jpg?v=1678899203"},{"product_id":"hardrace-suzuki-jimny-18-fuel-tank-skid-plate-4pcs-set","title":"Hardrace Fuel Tank Skid Plate Suzuki Jimny 18+","description":"\u003ch2\u003eHardrace Fuel Tank Skid Plate for Suzuki Jimny JB64 (2018-Present) – Protects underbody parts from impacts\u003c\/h2\u003e\n\u003cp\u003eThis Hardrace fuel tank skid plate is a tough upgrade that protects vulnerable parts underneath from rocks, debris and impacts off-road or on rough roads.\u003c\/p\u003e\n\u003cp\u003eIt suits the Suzuki Jimny JB64 (2018-Present).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProtects underbody parts from impacts\u003c\/li\u003e\n\u003cli\u003eStrong, durable construction\u003c\/li\u003e\n\u003cli\u003e4-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFuel tank skid plate (4 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5 2018-Present\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5D 2018-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the vehicle safely. Remove the factory part where fitted and install the Hardrace part, tightening all fixings to the vehicle manufacturer's torque figures. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-rear-panhard-rod-extention-bracket-1pcs-set-for-3-lift\"\u003eHardrace Rear Panhard Rod Extention Bracket 1Pcs Suzuki Jimny 18+ For 3\" Lift\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-brake-master-cylinder-stopper-1pcs-set-for-lhd-models\"\u003eHardrace Brake Master Cylinder Stopper 1Pcs Suzuki Jimny 18+ LHD\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-front-panhard-rod-extension-bracket-1pcs-set-for-2-inches-lifted-vehicles\"\u003eHardrace Front Panhard Rod Extension Bracket 1Pcs Suzuki Jimny 18+ For 2 Inches Lifted Veh\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780095471928,"sku":"HR-Q0765","price":179.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0765_main.jpg?v=1678899203"},{"product_id":"hardrace-suzuki-jimny-18-front-shock-absorber-skid-plate-2pcs-set","title":"Hardrace Front Shock Absorber Skid Plate Suzuki Jimny 18+","description":"\u003ch2\u003eHardrace Front Shock Absorber Skid Plate for Suzuki Jimny JB64 (2018-Present) – Protects underbody parts from impacts\u003c\/h2\u003e\n\u003cp\u003eThis Hardrace front shock absorber skid plate is a tough upgrade that protects vulnerable parts underneath from rocks, debris and impacts off-road or on rough roads.\u003c\/p\u003e\n\u003cp\u003eIt suits the Suzuki Jimny JB64 (2018-Present).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProtects underbody parts from impacts\u003c\/li\u003e\n\u003cli\u003eStrong, durable construction\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront shock absorber skid plate (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5 2018-Present\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5D 2018-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the vehicle safely. Remove the factory part where fitted and install the Hardrace part, tightening all fixings to the vehicle manufacturer's torque figures. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-rear-panhard-rod-extention-bracket-1pcs-set-for-3-lift\"\u003eHardrace Rear Panhard Rod Extention Bracket 1Pcs Suzuki Jimny 18+ For 3\" Lift\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-brake-master-cylinder-stopper-1pcs-set-for-lhd-models\"\u003eHardrace Brake Master Cylinder Stopper 1Pcs Suzuki Jimny 18+ LHD\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-front-panhard-rod-extension-bracket-1pcs-set-for-2-inches-lifted-vehicles\"\u003eHardrace Front Panhard Rod Extension Bracket 1Pcs Suzuki Jimny 18+ For 2 Inches Lifted Veh\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780096061752,"sku":"HR-Q0834","price":99.89,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0834_main.jpg?v=1678899206"},{"product_id":"hardrace-suzuki-jimny-18-front-panhard-rod-extension-bracket-1pcs-set-for-2-inches-lifted-vehicles","title":"Hardrace Front Panhard Rod Extension Bracket Suzuki Jimny 18+ For 2 Inches","description":"\u003ch2\u003eHardrace Front Panhard Rod Extension Bracket for Suzuki Jimny JB64 (2018-Present) – Corrects Geometry on Lifted Vehicles\u003c\/h2\u003e\n\u003cp\u003eThis Hardrace front panhard rod extension bracket corrects the panhard rod angle on lifted vehicles (3 inch lift), so the axle stays centred and the handling stays settled.\u003c\/p\u003e\n\u003cp\u003eThis version is for LHD vehicles.\u003c\/p\u003e\n\u003cp\u003eIt suits the Suzuki Jimny JB64 (2018-Present).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCorrects the rod angle on lifted vehicles\u003c\/li\u003e\n\u003cli\u003eKeeps the axle centred\u003c\/li\u003e\n\u003cli\u003eFor 3 inch lifts\u003c\/li\u003e\n\u003cli\u003eLHD version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront panhard rod extension bracket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5 2018-Present\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5D 2018-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e For LHD Car use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the vehicle safely on axle stands or a ramp. Remove the factory part and fit the Hardrace part in its place. Tighten all fixings to the vehicle manufacturer's torque figures with the vehicle on its wheels at normal ride height, so the bushes aren't pre-loaded. Check the steering is centred and have the alignment checked after fitting. We recommend professional fitting. Please note: 16-inch or larger rims required.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-rear-panhard-rod-extention-bracket-1pcs-set-for-3-lift\"\u003eHardrace Rear Panhard Rod Extention Bracket 1Pcs Suzuki Jimny 18+ For 3\" Lift\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-brake-master-cylinder-stopper-1pcs-set-for-lhd-models\"\u003eHardrace Brake Master Cylinder Stopper 1Pcs Suzuki Jimny 18+ LHD\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-rear-tow-hook-kit-1pcs-set\"\u003eHardrace Rear Tow Hook Kit 1Pcs Suzuki Jimny 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes, have a full alignment done after fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780096094520,"sku":"HR-Q0783","price":79.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hardrace-placeholder_2123e9d7-9ab2-4141-b524-283304fdd27f.jpg?v=1678899205"},{"product_id":"hardrace-suzuki-jimny-18-lhd-front-lh-side-tow-hook-kit-1pcs-set","title":"Hardrace Front Lh Side Tow Hook Kit Suzuki Jimny 18+ Lhd","description":"\u003ch2\u003eHardrace Front Tow Hook Kit for Suzuki Jimny JB64 (2018-Present) – Strong, secure towing point\u003c\/h2\u003e\n\u003cp\u003eThis Hardrace front tow hook kit gives you a strong, secure towing point, ideal for track days, motorsport and recovery.\u003c\/p\u003e\n\u003cp\u003eThis version is for LHD vehicles.\u003c\/p\u003e\n\u003cp\u003eIt suits the Suzuki Jimny JB64 (2018-Present).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStrong, secure towing point\u003c\/li\u003e\n\u003cli\u003eIdeal for track days and recovery\u003c\/li\u003e\n\u003cli\u003eLHD version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront tow hook kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5 2018-Present\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5D 2018-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e For LHD \/ Driver Side use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the vehicle safely. Remove the factory part where fitted and install the Hardrace part, tightening all fixings to the vehicle manufacturer's torque figures. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-rear-panhard-rod-extention-bracket-1pcs-set-for-3-lift\"\u003eHardrace Rear Panhard Rod Extention Bracket 1Pcs Suzuki Jimny 18+ For 3\" Lift\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-brake-master-cylinder-stopper-1pcs-set-for-lhd-models\"\u003eHardrace Brake Master Cylinder Stopper 1Pcs Suzuki Jimny 18+ LHD\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-front-panhard-rod-extension-bracket-1pcs-set-for-2-inches-lifted-vehicles\"\u003eHardrace Front Panhard Rod Extension Bracket 1Pcs Suzuki Jimny 18+ For 2 Inches Lifted Veh\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780096127288,"sku":"HR-Q0835","price":119.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0835_main.jpg?v=1678899206"},{"product_id":"hardrace-suzuki-jimny-18-rear-tow-hook-kit-1pcs-set","title":"Hardrace Rear Tow Hook Kit Suzuki Jimny 18+","description":"\u003ch2\u003eHardrace Rear Tow Hook Kit for Suzuki Jimny JB64 (2018-Present) – Strong, secure towing point\u003c\/h2\u003e\n\u003cp\u003eThis Hardrace rear tow hook kit gives you a strong, secure towing point, ideal for track days, motorsport and recovery.\u003c\/p\u003e\n\u003cp\u003eIt suits the Suzuki Jimny JB64 (2018-Present).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStrong, secure towing point\u003c\/li\u003e\n\u003cli\u003eIdeal for track days and recovery\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear tow hook kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5 2018-Present\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5D 2018-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e For RH \u0026amp; LH Side use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the vehicle safely. Remove the factory part where fitted and install the Hardrace part, tightening all fixings to the vehicle manufacturer's torque figures. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-rear-panhard-rod-extention-bracket-1pcs-set-for-3-lift\"\u003eHardrace Rear Panhard Rod Extention Bracket 1Pcs Suzuki Jimny 18+ For 3\" Lift\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-brake-master-cylinder-stopper-1pcs-set-for-lhd-models\"\u003eHardrace Brake Master Cylinder Stopper 1Pcs Suzuki Jimny 18+ LHD\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-front-panhard-rod-extension-bracket-1pcs-set-for-2-inches-lifted-vehicles\"\u003eHardrace Front Panhard Rod Extension Bracket 1Pcs Suzuki Jimny 18+ For 2 Inches Lifted Veh\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780096160056,"sku":"HR-Q0836","price":79.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0836_main.jpg?v=1678899207"},{"product_id":"hardrace-suzuki-jimny-18-rear-4-link-adjustable-arm-kit-hardened-rubber-pillow-ball-8pcs-set","title":"Hardrace Rear 4-Link Adjustable Arm Kit Rubber Pillow Ball Suzuki 18+","description":"\u003ch2\u003eHardrace Adjustable Rear 4 Link Arm Kit for Suzuki Jimny JB64 (2018-Present) – Adjustable Geometry, Sharper Handling\u003c\/h2\u003e\n\u003cp\u003eFactory control arms are built for comfort, with soft rubber bushes that let the wheel move around under cornering, braking and acceleration. These Hardrace rear 4 link arm kits are an upgrade over the factory parts. Each one locates the suspension far more firmly, so the car feels sharper and more consistent through corners and over bumps.\u003c\/p\u003e\n\u003cp\u003eThey use a mix of pillow ball and hardened rubber bushes. The length is adjustable, so you can fine-tune the geometry.\u003c\/p\u003e\n\u003cp\u003eIt suits the Suzuki Jimny 2018-Present.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer suspension location than the factory arms\u003c\/li\u003e\n\u003cli\u003eSharper, more consistent handling\u003c\/li\u003e\n\u003cli\u003eAdjustable length to fine-tune the geometry\u003c\/li\u003e\n\u003cli\u003ePillow ball and hardened rubber bushes\u003c\/li\u003e\n\u003cli\u003eHigh-strength steel construction\u003c\/li\u003e\n\u003cli\u003eSupplied complete with bushes or joints fitted, so no press is needed\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e8-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear 4 link arm kit (8 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5 2018-Present\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5D 2018-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on axle stands or a ramp. Remove the factory arm and bolt the Hardrace arm in its place; it comes complete with its bushes or joints fitted, so no press is needed. Set adjustable arms to the same length as the factory parts to start. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-front-panhard-rod-harden-rubber-1-piece-set-for-rhd-use-suzuki-jimny-18\"\u003eHardrace Front Panhard Rod Harden Rubber 1 Piece Set RHD Suzuki Jimny 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-front-panhard-rod-hardened-rubber-1pcs-set-for-lhd-use\"\u003eHardrace Front Panhard Rod Hardened Rubber 1Pcs Suzuki Jimny 18+ LHD\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-steering-stabilizer-1pcs-set\"\u003eHardrace Steering Stabilizer 1Pcs Suzuki Jimny 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes. Have a full four-wheel alignment done after fitting, and use it to set the adjustable arms to the settings you want.\u003c\/p\u003e\n\u003ch3\u003eDoes it come with the bushes fitted?\u003c\/h3\u003e\n\u003cp\u003eYes. The arm comes complete with its bushes or joints already fitted, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eIt is firmer than standard. The pillow ball joints give precise location where it matters most, while the hardened rubber bushes help keep noise and vibration down.\u003c\/p\u003e\n\u003ch3\u003eHow is it adjusted?\u003c\/h3\u003e\n\u003cp\u003eThe arm length is set with the adjuster and locked with lock nuts. Set it to the factory length first, then fine-tune it during the alignment.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780096192824,"sku":"HR-Q0867","price":1197.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0867_main.jpg?v=1678899209"},{"product_id":"hardrace-suzuki-jimny-18-brake-master-cylinder-stopper-1pcs-set-for-lhd-models","title":"Hardrace Brake Master Cylinder Stopper Suzuki Jimny 18+ LHD","description":"\u003ch2\u003eHardrace Brake Master Cylinder Stopper for Suzuki Jimny JB64 (2018-Present) (LHD) – Firmer, More Consistent Pedal\u003c\/h2\u003e\n\u003cp\u003eUnder hard braking the brake master cylinder can flex the bulkhead it is mounted to, which makes the pedal feel soft and long. This Hardrace brake master cylinder stopper braces the master cylinder against the bulkhead, so the pedal feels firmer and more consistent and you can modulate the brakes more precisely.\u003c\/p\u003e\n\u003cp\u003eThis version is for LHD cars.\u003c\/p\u003e\n\u003cp\u003eIt suits the Suzuki Jimny JB64 (2018-Present).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer, more consistent brake pedal\u003c\/li\u003e\n\u003cli\u003eStops the master cylinder flexing the bulkhead\u003c\/li\u003e\n\u003cli\u003eMore precise brake modulation\u003c\/li\u003e\n\u003cli\u003eBolt-on fitting\u003c\/li\u003e\n\u003cli\u003eLHD version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrake master cylinder stopper\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5 2018-Present\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5D 2018-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e For non-ACC equipped models only; For Left-hand Drive use only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eOpen the bonnet and fit the stopper so it braces the brake master cylinder against the bulkhead, following the Hardrace instructions. Make sure it doesn't press on any pipes or wiring, and check the brake pedal feel before driving. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-rear-panhard-rod-extention-bracket-1pcs-set-for-3-lift\"\u003eHardrace Rear Panhard Rod Extention Bracket 1Pcs Suzuki Jimny 18+ For 3\" Lift\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-front-panhard-rod-extension-bracket-1pcs-set-for-2-inches-lifted-vehicles\"\u003eHardrace Front Panhard Rod Extension Bracket 1Pcs Suzuki Jimny 18+ For 2 Inches Lifted Veh\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-rear-tow-hook-kit-1pcs-set\"\u003eHardrace Rear Tow Hook Kit 1Pcs Suzuki Jimny 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIs it the right one for my car?\u003c\/h3\u003e\n\u003cp\u003eCheck LHD or RHD first: master cylinder stoppers are made for one drive side only. The note in the Fitment section says which this one is.\u003c\/p\u003e\n\u003ch3\u003eDoes it change the brakes themselves?\u003c\/h3\u003e\n\u003cp\u003eNo. It only stops the master cylinder moving, so the pedal feels firmer. It works with standard or uprated brakes.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780096225592,"sku":"HR-Q0784","price":79.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0784_main_1.jpg?v=1678899210"},{"product_id":"hardrace-suzuki-jimny98-18-18-front-radius-arm-axle-side-bushing-offset-hardened-rubber-4pcs-set","title":"Hardrace Front Radius Arm Axle Side Bushing Offset Rubber Suzuki 98+","description":"\u003ch2\u003eHardrace Front Radius Arm Bushes Axle Side Hardened Rubber for Suzuki Jimny JB23\/JB64 (1998-Present) – Firmer Location, Sharper Handling\u003c\/h2\u003e\n\u003cp\u003eFactory suspension bushes are built for comfort, so they flex under cornering, braking and acceleration and let the suspension move around. These Hardrace front radius arm bushes axle side are a firmer upgrade that fits into the factory parts, so the suspension is located more precisely and the car feels sharper and more consistent.\u003c\/p\u003e\n\u003cp\u003eThey are made from hardened rubber, a high-strength, anti-crack compound that is firmer than the factory bushes but still absorbs vibration. The offset design lets you adjust the geometry, adding caster for more stable steering.\u003c\/p\u003e\n\u003cp\u003eIt suits the Suzuki Jimny JB23\/JB64 (1998-Present).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer than the factory bushes\u003c\/li\u003e\n\u003cli\u003eSharper, more consistent handling\u003c\/li\u003e\n\u003cli\u003eHardened rubber: firm but still absorbs vibration\u003c\/li\u003e\n\u003cli\u003eOffset design for geometry adjustment\u003c\/li\u003e\n\u003cli\u003e4-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront radius arm bushes axle side (4 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB23\/33\/43\/53) 1998-2018 \/ Jimny 1.3 1998-2018\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB23\/33\/43\/53) 1998-2018 \/ Jimny 1.5TD 1998-2018\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5 2018-Present\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5D 2018-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe bushes press into the factory parts, so the part needs removing from the car and a hydraulic press is needed to press the old bushes out and the new Hardrace bushes in. Refit the part and tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-rubber-front-lower-control-arm-front-side-bushes-2pc-set-suzuki-jimny-00-18\"\u003eHardrace Hardened Rubber Front Lower Control Arm Front Side Bushes 2Pc Set Suzuki Jimny 00\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-rubber-front-lower-control-arm-rear-side-bushes-2pc-set-suzuki-jimny-00-18\"\u003eHardrace Hardened Rubber Front Lower Control Arm Rear Side Bushes 2Pc Set Suzuki Jimny 00-\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-propellor-shaft-spacer-10mm-suzuki-jimny-98\"\u003eHardrace Propellor Shaft Spacer 10mm Suzuki Jimny 98+\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need a press?\u003c\/h3\u003e\n\u003cp\u003eYes. The old bushes must be pressed out and the new ones pressed in with a hydraulic press.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes, have a full four-wheel alignment done after fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eOnly slightly. The hardened rubber is firmer than the factory bushes but still absorbs vibration, so it stays comfortable for everyday driving.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780096520504,"sku":"HR-Q0878","price":155.22,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0878_main_1.jpg?v=1678899213"},{"product_id":"hardrace-suzuki-jimny-18-front-extended-bump-stop-4pcs-set","title":"Hardrace Front Extended Bump Stop Suzuki Jimny 18+","description":"\u003ch2\u003eHardrace Front Extended Bump Stops for Suzuki Jimny JB64 (2018-Present) – Controlled Suspension Travel\u003c\/h2\u003e\n\u003cp\u003eBump stops limit suspension travel so the dampers don't bottom out. These Hardrace front extended bump stops are longer than standard, to suit lifted suspension and stop the dampers bottoming out.\u003c\/p\u003e\n\u003cp\u003eIt suits the Suzuki Jimny JB64 (2018-Present).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eControls suspension travel\u003c\/li\u003e\n\u003cli\u003eStops the dampers bottoming out\u003c\/li\u003e\n\u003cli\u003e4-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront extended bump stops (4 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5 2018-Present\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5D 2018-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eRemove the damper from the car and use proper spring compressors to strip it, then fit the Hardrace bump stops in place of the factory ones and rebuild the damper. Tighten everything to the correct torque figures. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-body-mount-bushing-kit-suzuki-jimny-18\"\u003eHardrace Body Mount Bushing Kit Suzuki Jimny 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-rear-extended-bump-stop-4pcs-set\"\u003eHardrace Rear Extended Bump Stop 4Pcs Suzuki Jimny 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780096553272,"sku":"HR-Q0862","price":110.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0862_main.jpg?v=1678899213"},{"product_id":"hardrace-suzuki-jimny-18-rear-side-headlight-leveling-bracket-1pcs-set-for-0-3-inches-lifted-vehicle","title":"Hardrace Rear Side Headlight Leveling Bracket 1Pcs Suzuki Jimny 18+ For 0-3 Inches Lifted Vehicle","description":"\u003ch2\u003eHardrace Rear Side Headlight Leveling Bracket for Suzuki Jimny JB64 (2018-Present) – Corrects headlight aim after lowering or lifting\u003c\/h2\u003e\n\u003cp\u003eWhen you lower or lift a car, the automatic headlight levelling sensor reads the new ride height as load and aims the headlights wrongly. This Hardrace rear side headlight leveling bracket corrects the sensor angle, so the headlights stay properly aimed after changing the ride height.\u003c\/p\u003e\n\u003cp\u003eIt suits the Suzuki Jimny JB64 (2018-Present).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCorrects headlight aim after lowering or lifting\u003c\/li\u003e\n\u003cli\u003eKeeps the auto-levelling working properly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear side headlight leveling bracket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5 2018-Present\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5D 2018-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the vehicle safely. Remove the factory part where fitted and install the Hardrace part, tightening all fixings to the vehicle manufacturer's torque figures. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780096618808,"sku":"HR-Q0742","price":22.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hardrace-placeholder_c58850fc-02d4-4d57-80b8-1a803ed1f579.jpg?v=1678899213"},{"product_id":"hardrace-suzuki-jimny-18-rear-extended-bump-stop-4pcs-set","title":"Hardrace Rear Extended Bump Stop Suzuki Jimny 18+","description":"\u003ch2\u003eHardrace Rear Extended Bump Stops for Suzuki Jimny JB64 (2018-Present) – Controlled Suspension Travel\u003c\/h2\u003e\n\u003cp\u003eBump stops limit suspension travel so the dampers don't bottom out. These Hardrace rear extended bump stops are longer than standard, to suit lifted suspension and stop the dampers bottoming out.\u003c\/p\u003e\n\u003cp\u003eIt suits the Suzuki Jimny JB64 (2018-Present).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eControls suspension travel\u003c\/li\u003e\n\u003cli\u003eStops the dampers bottoming out\u003c\/li\u003e\n\u003cli\u003e4-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear extended bump stops (4 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5 2018-Present\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5D 2018-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eRemove the damper from the car and use proper spring compressors to strip it, then fit the Hardrace bump stops in place of the factory ones and rebuild the damper. Tighten everything to the correct torque figures. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-body-mount-bushing-kit-suzuki-jimny-18\"\u003eHardrace Body Mount Bushing Kit Suzuki Jimny 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-front-extended-bump-stop-4pcs-set\"\u003eHardrace Front Extended Bump Stop 4Pcs Suzuki Jimny 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780096586040,"sku":"HR-Q0863","price":88.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0863_main.jpg?v=1678899213"},{"product_id":"hardrace-suzuki-jimny-18-rear-side-headlight-leveling-rod-bracket-1pcs-set","title":"Hardrace Rear Side Headlight Leveling Rod Bracket Suzuki Jimny 18+","description":"\u003ch2\u003eHardrace Rear Side Headlight Leveling Rod \u0026amp; Bracket for Suzuki Jimny JB64 (2018-Present) – Corrects headlight aim after lowering or lifting\u003c\/h2\u003e\n\u003cp\u003eWhen you lower or lift a car, the automatic headlight levelling sensor reads the new ride height as load and aims the headlights wrongly. This Hardrace rear side headlight leveling rod \u0026amp; bracket corrects the sensor angle, so the headlights stay properly aimed after changing the ride height.\u003c\/p\u003e\n\u003cp\u003eIt suits the Suzuki Jimny JB64 (2018-Present).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCorrects headlight aim after lowering or lifting\u003c\/li\u003e\n\u003cli\u003eKeeps the auto-levelling working properly\u003c\/li\u003e\n\u003cli\u003eFor 2 inch lift\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear side headlight leveling rod \u0026amp; bracket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5 2018-Present\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5D 2018-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the vehicle safely. Remove the factory part where fitted and install the Hardrace part, tightening all fixings to the vehicle manufacturer's torque figures. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-rear-panhard-rod-extention-bracket-1pcs-set-for-3-lift\"\u003eHardrace Rear Panhard Rod Extention Bracket 1Pcs Suzuki Jimny 18+ For 3\" Lift\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-brake-master-cylinder-stopper-1pcs-set-for-lhd-models\"\u003eHardrace Brake Master Cylinder Stopper 1Pcs Suzuki Jimny 18+ LHD\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-front-panhard-rod-extension-bracket-1pcs-set-for-2-inches-lifted-vehicles\"\u003eHardrace Front Panhard Rod Extension Bracket 1Pcs Suzuki Jimny 18+ For 2 Inches Lifted Veh\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780096684344,"sku":"HR-Q0950","price":88.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0950_main.jpg?v=1678899217"},{"product_id":"hardrace-front-lower-arm-front-side-spherical-bearings-2pc-set-suzuki-jimny-00","title":"Hardrace Front Lower Arm Front Side Spherical Bearings Suzuki Jimny 00-18","description":"\u003ch2\u003eHardrace Front \u0026amp; Rear Radius Arm Bushes Axle Side for Suzuki Jimny JB23 (1998-2018) – Firmer Location, Sharper Handling\u003c\/h2\u003e\n\u003cp\u003eFactory suspension bushes are built for comfort, so they flex under cornering, braking and acceleration and let the suspension move around. These Hardrace front \u0026amp; rear radius arm bushes axle side are a firmer upgrade that fits into the factory parts, so the suspension is located more precisely and the car feels sharper and more consistent.\u003c\/p\u003e\n\u003cp\u003eThey use pillow ball (spherical) joints, which give precise, direct feedback with no rubber deflection. 4 sets are needed per car.\u003c\/p\u003e\n\u003cp\u003eIt suits the Suzuki Jimny JB23 (1998-2018).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer than the factory bushes\u003c\/li\u003e\n\u003cli\u003eSharper, more consistent handling\u003c\/li\u003e\n\u003cli\u003ePillow ball joints for zero deflection\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront \u0026amp; rear radius arm bushes axle side (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB23\/33\/43\/53) 1998-2018 \/ Jimny 1.3 1998-2018\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB23\/33\/43\/53) 1998-2018 \/ Jimny 1.5TD 1998-2018\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe bushes press into the factory parts, so the part needs removing from the car and a hydraulic press is needed to press the old bushes out and the new Hardrace bushes in. Refit the part and tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-rubber-front-lower-control-arm-front-side-bushes-2pc-set-suzuki-jimny-00-18\"\u003eHardrace Hardened Rubber Front Lower Control Arm Front Side Bushes 2Pc Set Suzuki Jimny 00\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-rubber-front-lower-control-arm-rear-side-bushes-2pc-set-suzuki-jimny-00-18\"\u003eHardrace Hardened Rubber Front Lower Control Arm Rear Side Bushes 2Pc Set Suzuki Jimny 00-\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-propellor-shaft-spacer-10mm-suzuki-jimny-98\"\u003eHardrace Propellor Shaft Spacer 10mm Suzuki Jimny 98+\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need a press?\u003c\/h3\u003e\n\u003cp\u003eYes. The old bushes must be pressed out and the new ones pressed in with a hydraulic press.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes, have a full four-wheel alignment done after fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003ePillow ball joints pass on a little more noise and vibration than rubber, but there is no rubber flex, so the handling is far more precise.\u003c\/p\u003e\n\u003ch3\u003eHow many do I need?\u003c\/h3\u003e\n\u003cp\u003e4 sets are needed per car.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780096717112,"sku":"HR-6947","price":179.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201672714154914p15f49so.jpg?v=1678899216"},{"product_id":"hardrace-suzuki-jimny-98-18-rc-tie-rod-end-1pcs-set-upside-down-installation-for-lhd-use-for-3-lift","title":"Hardrace Rc Tie Rod End Suzuki Jimny 98-18 Upside Down Installation LHD","description":"\u003ch2\u003eHardrace Reverse Tie Rod End for Suzuki Jimny JB23 (1998-2018) – Precise, Play-Free Steering\u003c\/h2\u003e\n\u003cp\u003eLifting a car changes the steering geometry and causes bump steer. This Hardrace reverse tie rod end installs upside down to correct the tie rod angle on lifted cars, for steadier, more precise steering.\u003c\/p\u003e\n\u003cp\u003eIt suits the Suzuki Jimny JB23 (1998-2018).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStronger than the factory tie rod ends\u003c\/li\u003e\n\u003cli\u003ePrecise, play-free steering\u003c\/li\u003e\n\u003cli\u003eInstalls upside down to correct the tie rod angle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReverse tie rod end\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB23\/33\/43\/53) 1998-2018 \/ Jimny 1.3 1998-2018\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB23\/33\/43\/53) 1998-2018 \/ Jimny 1.5TD 1998-2018\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e For LHD Car use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely and remove the wheel. Note the position of the factory part, then undo the lock nut, separate the tie rod end from the hub with a proper splitter and unscrew it. Fit the Hardrace part, tighten all fixings to the vehicle manufacturer's torque figures, and have the front tracking set straight away. We recommend professional fitting. Please note: 16-inch or larger rims required.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes, have the front tracking set straight after fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780096782648,"sku":"HR-Q0780","price":99.89,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0780_main.jpg?v=1678899216"},{"product_id":"hardrace-suzuki-jimny-18-reverse-tie-rod-end-front-panhard-rod-extension-bracket-for-lhd-use-for-3-lift-2pcs-set","title":"Hardrace Reverse Tie Rod End Front Panhard Rod Extension Bracket Suzuki 18+","description":"\u003ch2\u003eHardrace Reverse Tie Rod End \u0026amp; Panhard Bracket Kit for Suzuki Jimny JB64 (2018-Present) – Sharper Steering, Less Bump Steer\u003c\/h2\u003e\n\u003cp\u003eThis Hardrace reverse tie rod end \u0026amp; panhard bracket kit upgrades the steering linkage in one go, installing upside down to correct the tie rod angle on heavily lowered track cars, for sharper, more precise steering with less bump steer.\u003c\/p\u003e\n\u003cp\u003eIt suits the Suzuki Jimny JB64 (2018-Present).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUpgrades the steering linkage in one go\u003c\/li\u003e\n\u003cli\u003eSharper steering, less bump steer\u003c\/li\u003e\n\u003cli\u003eInstalls upside down to correct the tie rod angle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReverse tie rod end \u0026amp; panhard bracket kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5 2018-Present\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5D 2018-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e For LHD Car use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely and remove the wheel. Note the position of the factory part, then remove the tie rod end and steering boot and unscrew the inner tie rod from the rack. Fit the Hardrace part, tighten all fixings to the vehicle manufacturer's torque figures, and have the front tracking set straight away. We recommend professional fitting. Please note: 16-inch or larger rims required.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes, have the front tracking set straight after fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780096848184,"sku":"HR-Q0860","price":179.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hardrace-placeholder_04ce8501-9ba8-42c0-a541-6d315b6f8985.jpg?v=1678899219"},{"product_id":"hardrace-suzuki-jimny-18-steering-stabilizer-1pcs-set","title":"Hardrace Steering Stabiliser Suzuki Jimny 18+","description":"\u003ch2\u003eHardrace Steering Stabiliser for Suzuki Jimny JB64 (2018-Present) – Built for Lifted Off-Roaders\u003c\/h2\u003e\n\u003cp\u003eThis Hardrace steering stabiliser is an upgrade for lifted off-roaders, keeping the steering precise and controlled with bigger tyres and lifted suspension.\u003c\/p\u003e\n\u003cp\u003eIt suits the Suzuki Jimny JB64 (2018-Present).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt for lifted off-road use\u003c\/li\u003e\n\u003cli\u003eKeeps the steering precise and controlled\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSteering stabiliser\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5 2018-Present\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5D 2018-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e For Both LHD \u0026amp; RHD Models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the vehicle safely. Remove the factory part and fit the Hardrace part in its place, tightening all fixings to the vehicle manufacturer's torque figures. Have the steering alignment checked after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-front-panhard-rod-harden-rubber-1-piece-set-for-rhd-use-suzuki-jimny-18\"\u003eHardrace Front Panhard Rod Harden Rubber 1 Piece Set RHD Suzuki Jimny 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-front-panhard-rod-hardened-rubber-1pcs-set-for-lhd-use\"\u003eHardrace Front Panhard Rod Hardened Rubber 1Pcs Suzuki Jimny 18+ LHD\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-98-18-18-front-adjustable-radius-arm-hardened-rubber-2pcs-set-lift-3-inches\"\u003eHardrace Front Adjustable Radius Arm Hardened Rubber 2Pcs Suzuki Jimny 98-18 18+ Lift 3 In\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes, have the front tracking set straight after fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780096880952,"sku":"HR-Q0908","price":319.26,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0908_main_1.jpg?v=1678899220"},{"product_id":"hardrace-suzuki-jimny-18-front-sway-bar-30mm-5pcs-set","title":"Hardrace Front Sway Bar 30mm Suzuki Jimny 18+","description":"\u003ch2\u003eHardrace 30mm Front Anti Roll Bar for Suzuki Jimny JB64 (2018-Present) – Flatter Cornering, Sharper Response\u003c\/h2\u003e\n\u003cp\u003eThe factory front anti-roll bar is built for comfort, so the car leans in corners and the steering feels slow to respond. This Hardrace 30mm front anti-roll bar is a stiffer upgrade that cuts body roll, so the car sits flatter, turns in more crisply and feels more composed through quick changes of direction.\u003c\/p\u003e\n\u003cp\u003eThe hollow design adds stiffness without adding much weight. It is heat treated for strength. It comes with mounting bushes.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e30mm front bar for reduced body roll\u003c\/li\u003e\n\u003cli\u003eSharper turn-in and flatter cornering\u003c\/li\u003e\n\u003cli\u003eHollow design for stiffness without excess weight\u003c\/li\u003e\n\u003cli\u003eHeat treated for strength\u003c\/li\u003e\n\u003cli\u003eMounting bushes included\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e5-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e30mm front anti-roll bar\u003c\/li\u003e\n\u003cli\u003eMounting bushes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e5 pieces in total.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5 2018-Present\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5D 2018-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on a ramp or axle stands. Undo the drop links and bush brackets and remove the factory bar. Fit the Hardrace bar with its bushes, refit the brackets and links, and tighten everything to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. No wheel alignment is needed for the bar alone. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment after fitting?\u003c\/h3\u003e\n\u003cp\u003eNo. An anti-roll bar does not change camber, toe or caster. You only need an alignment if you change the ride height at the same time.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eA stiffer bar is felt mainly in corners and over bumps that hit one side of the car. Over bumps that hit both wheels evenly, the ride is largely unchanged.\u003c\/p\u003e\n\u003ch3\u003eCan I use my standard drop links?\u003c\/h3\u003e\n\u003cp\u003eYes. On a lowered car, adjustable drop links let you set the bar level at rest, so it is not pre-loaded.\u003c\/p\u003e\n\u003ch3\u003eShould I upgrade the rear bar too?\u003c\/h3\u003e\n\u003cp\u003eUpgrading both ends cuts roll at both axles while keeping the balance closer to standard. Upgrading one end only shifts the balance: a stiffer front adds understeer, a stiffer rear adds oversteer.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780096913720,"sku":"HR-Q0578","price":248.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0578_main_2.jpg?v=1678899220"},{"product_id":"hardrace-suzuki-jimny-18-front-quick-disconnect-sway-bar-7pcs-set","title":"Hardrace Front Quick Disconnect Sway Bar Suzuki Jimny 18+","description":"\u003ch2\u003eHardrace Front Anti Roll Bar for Suzuki Jimny JB64 (2018-Present) – Flatter Cornering, Sharper Response\u003c\/h2\u003e\n\u003cp\u003eThe factory front anti-roll bar is built for comfort, so the car leans in corners and the steering feels slow to respond. This Hardrace quick-disconnect front anti-roll bar is a stiffer upgrade that cuts body roll on the road, and can be disconnected off road for maximum axle articulation, so the car sits flatter, turns in more crisply and feels more composed through quick changes of direction.\u003c\/p\u003e\n\u003cp\u003eIt comes with mounting bushes.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront bar for reduced body roll\u003c\/li\u003e\n\u003cli\u003eSharper turn-in and flatter cornering\u003c\/li\u003e\n\u003cli\u003eMounting bushes included\u003c\/li\u003e\n\u003cli\u003eQuick-disconnect design for off-road articulation\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e7-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront anti-roll bar\u003c\/li\u003e\n\u003cli\u003eMounting bushes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e7 pieces in total.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5 2018-Present\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5D 2018-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on a ramp or axle stands. Undo the drop links and bush brackets and remove the factory bar. Fit the Hardrace bar with its bushes, refit the brackets and links, and tighten everything to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. No wheel alignment is needed for the bar alone. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment after fitting?\u003c\/h3\u003e\n\u003cp\u003eNo. An anti-roll bar does not change camber, toe or caster. You only need an alignment if you change the ride height at the same time.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eA stiffer bar is felt mainly in corners and over bumps that hit one side of the car. Over bumps that hit both wheels evenly, the ride is largely unchanged.\u003c\/p\u003e\n\u003ch3\u003eCan I use my standard drop links?\u003c\/h3\u003e\n\u003cp\u003eYes. On a lowered car, adjustable drop links let you set the bar level at rest, so it is not pre-loaded.\u003c\/p\u003e\n\u003ch3\u003eShould I upgrade the rear bar too?\u003c\/h3\u003e\n\u003cp\u003eUpgrading both ends cuts roll at both axles while keeping the balance closer to standard. Upgrading one end only shifts the balance: a stiffer front adds understeer, a stiffer rear adds oversteer.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780096946488,"sku":"HR-Q0823","price":709.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0823_main.jpg?v=1678899220"},{"product_id":"hardrace-suzuki-jimny-18-front-sway-bar-relocation-kit-8pcs-set-for-3-inches-lift-incl-stabilizer-bushings-brackets","title":"Hardrace Front Sway Bar Relocation Kit Suzuki Jimny 18+ For 3 Inches Lift","description":"\u003ch2\u003eHardrace Front Stabiliser Relocation Kit for Suzuki Jimny JB64 (2018-Present) – Reduces body roll\u003c\/h2\u003e\n\u003cp\u003eThis Hardrace front stabiliser relocation kit is an anti-roll bar upgrade that reduces body roll, for flatter, more responsive cornering.\u003c\/p\u003e\n\u003cp\u003eIt suits the Suzuki Jimny JB64 (2018-Present).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces body roll\u003c\/li\u003e\n\u003cli\u003eSharper, more responsive handling\u003c\/li\u003e\n\u003cli\u003eFor 3 inch lift\u003c\/li\u003e\n\u003cli\u003e8-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront stabiliser relocation kit (8 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5 2018-Present\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5D 2018-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e For OE Sway Bar \u0026amp; #Q0578 use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the vehicle safely. Remove the factory part where fitted and install the Hardrace part, tightening all fixings to the vehicle manufacturer's torque figures. Have the alignment checked after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-rear-panhard-rod-extention-bracket-1pcs-set-for-3-lift\"\u003eHardrace Rear Panhard Rod Extention Bracket 1Pcs Suzuki Jimny 18+ For 3\" Lift\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-brake-master-cylinder-stopper-1pcs-set-for-lhd-models\"\u003eHardrace Brake Master Cylinder Stopper 1Pcs Suzuki Jimny 18+ LHD\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-front-panhard-rod-extension-bracket-1pcs-set-for-2-inches-lifted-vehicles\"\u003eHardrace Front Panhard Rod Extension Bracket 1Pcs Suzuki Jimny 18+ For 2 Inches Lifted Veh\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780097012024,"sku":"HR-Q0859","price":99.89,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0859_main_1.jpg?v=1678899222"},{"product_id":"hardrace-suzuki-jimny-18-lhd-front-rh-side-tow-hook-kit-1pcs-set","title":"Hardrace Front Rh Side Tow Hook Kit Suzuki Jimny 18+ Lhd","description":"\u003ch2\u003eHardrace Front Tow Hook Kit for Suzuki Jimny JB64 (2018-Present) – Strong, secure towing point\u003c\/h2\u003e\n\u003cp\u003eThis Hardrace front tow hook kit gives you a strong, secure towing point, ideal for track days, motorsport and recovery.\u003c\/p\u003e\n\u003cp\u003eThis version is for LHD vehicles.\u003c\/p\u003e\n\u003cp\u003eIt suits the Suzuki Jimny JB64 (2018-Present).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStrong, secure towing point\u003c\/li\u003e\n\u003cli\u003eIdeal for track days and recovery\u003c\/li\u003e\n\u003cli\u003eLHD version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront tow hook kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5 2018-Present\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Jimny \/ SUV (JB64) 2018-Present \/ Jimny 1.5D 2018-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e For LHD \/ Passenger Side use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the vehicle safely. Remove the factory part where fitted and install the Hardrace part, tightening all fixings to the vehicle manufacturer's torque figures. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-rear-panhard-rod-extention-bracket-1pcs-set-for-3-lift\"\u003eHardrace Rear Panhard Rod Extention Bracket 1Pcs Suzuki Jimny 18+ For 3\" Lift\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-brake-master-cylinder-stopper-1pcs-set-for-lhd-models\"\u003eHardrace Brake Master Cylinder Stopper 1Pcs Suzuki Jimny 18+ LHD\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-suzuki-jimny-18-front-panhard-rod-extension-bracket-1pcs-set-for-2-inches-lifted-vehicles\"\u003eHardrace Front Panhard Rod Extension Bracket 1Pcs Suzuki Jimny 18+ For 2 Inches Lifted Veh\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780097044792,"sku":"HR-Q0876","price":139.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0876_main_1.jpg?v=1678899223"},{"product_id":"hardrace-adjustable-universal-drop-links-10mm-rod-ends-100-109mm","title":"Hardrace Adjustable Universal Drop Links 10mm Rod Ends 100-109mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 100-120mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 100-120mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 100-120mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop link\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Convertible (V36) 2009-2013 \/ G37 Convertible 3.7 2009-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Coupe (V36) 2008-2013 \/ G37 Coupe 3.7 2008-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Sedan (V36) 2006-2013 \/ G25 Sedan 2.5 2010-2012\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Sedan (V36) 2006-2013 \/ G35 Sedan 3.5 2006-2008\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Sedan (V36) 2006-2013 \/ G37 Sedan 3.7 2007-2013\u003c\/li\u003e\n\u003cli\u003eNissan \/ 350Z 2002-2009 \/ Coupe (Z33) 2002-2009 \/ 350Z 3.5 2002-2009\u003c\/li\u003e\n\u003cli\u003ePorsche \/ 911 (5th Gen) 1997-2005 \/ 911 (996) 1997-2005 \/ 911 Carrera 3.4 1997-2002\u003c\/li\u003e\n\u003cli\u003ePorsche \/ 911 (5th Gen) 1997-2005 \/ 911 (996) 1997-2005 \/ 911 Carrera 4 3.4 1997-2002\u003c\/li\u003e\n\u003cli\u003eFord \/ Focus (4th Gen) 2018-Present \/ Hatchback (C519) 2018-Present \/ Focus 1.0 Turbo 2018-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Focus (4th Gen) 2018-Present \/ Hatchback (C519) 2018-Present \/ Focus 1.0 Turbo Hybrid 2018-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Focus (4th Gen) 2018-Present \/ Hatchback (C519) 2018-Present \/ Focus 1.5 TD 2018-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Focus (4th Gen) 2018-Present \/ Hatchback (C519) 2018-Present \/ Focus 1.5 Turbo 2018-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Focus (4th Gen) 2018-Present \/ Hatchback (C519) 2018-Present \/ Focus 2.0 TD 2018-Present\u003c\/li\u003e\n\u003cli\u003eNissan \/ 350Z 2002-2009 \/ Coupe (Z33) 2002-2009 \/ 350Z 3.5 (w\/ Brembo) 2002-2009\u003c\/li\u003e\n\u003cli\u003eNissan \/ 350Z 2002-2009 \/ Roadster (Z33) 2004-2009 \/ 350Z 3.5 (w\/ Brembo) 2004-2009\u003c\/li\u003e\n\u003cli\u003eNissan \/ 350Z 2002-2009 \/ Roadster (Z33) 2004-2009 \/ 350Z 3.5 2004-2009\u003c\/li\u003e\n\u003cli\u003eNissan \/ 370Z 2009-Present \/ Coupe (Z34) 2009-Present \/ 370Z 3.7 2009-Present\u003c\/li\u003e\n\u003cli\u003eNissan \/ 370Z 2009-Present \/ Roadster (Z34) 2009-Present \/ 370Z 3.7 2009-Present\u003c\/li\u003e\n\u003cli\u003eHonda \/ Accord 4-Door Sedan \/ 2003-2005 \/ 2.0i\u003c\/li\u003e\n\u003cli\u003eHonda \/ Accord 4-Door Sedan \/ 2003-2005 \/ 2.4i\u003c\/li\u003e\n\u003cli\u003eHonda \/ Accord 4-Door Sedan \/ 2005-2008 \/ 2.0i\u003c\/li\u003e\n\u003cli\u003eHonda \/ Accord 4-Door Sedan \/ 2005-2008 \/ 2.4i\u003c\/li\u003e\n\u003cli\u003eHonda \/ CR-V \/ 2017-2023 \/ 2.0 2WD\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Focus MK4 : Not For Wagon use; Porsche 996: For C2\/C4\/Turbo Rear Side use; CR-V '17-: For AWD Rear Side use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780138529080,"sku":"HR-6853-100","price":106.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201512992409u2d40ms.jpg?v=1678899660"},{"product_id":"hardrace-adjustable-universal-drop-links-10mm-rod-ends-125-164mm","title":"Hardrace Adjustable Universal Drop Links 10mm Rod Ends 125-164mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 125-164mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 125-164mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 125-164mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW \/ 1-Series (2nd Gen) \/ Hatchback 3DR (F21) \/ 2011-2019\u003c\/li\u003e\n\u003cli\u003eBMW \/ 1-Series (2nd Gen) \/ Hatchback 5DR (F20) \/ 2011-2019\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (6th Gen) \/ Gran Turismo (F34) \/ 2011-2019\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (6th Gen) \/ Sedan (F30) \/ 2011-2019\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (6th Gen) \/ Touring (F31) \/ 2011-2019\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (7th Gen) \/ Sedan (G20) \/ 2019-Present\u003c\/li\u003e\n\u003cli\u003eBMW \/ 4-Series (2nd Gen) \/ Convertible (G23) \/ 2020-Present\u003c\/li\u003e\n\u003cli\u003eBMW \/ 4-Series (2nd Gen) \/ Coupe (G22) \/ 2020-Present\u003c\/li\u003e\n\u003cli\u003eBMW \/ 4-Series (2nd Gen) \/ Gran Coupe (G26) \/ 2020-Present\u003c\/li\u003e\n\u003cli\u003eBMW \/ Z4 (3rd Gen) \/ Roadster (G29) \/ 2019-Present\u003c\/li\u003e\n\u003cli\u003eHonda \/ Accord 4-Door Sedan \/ 2008-2011\u003c\/li\u003e\n\u003cli\u003eMazda \/ 3 (3rd Gen) \/ Hatchback (BM\/BN) \/ 2013-2018\u003c\/li\u003e\n\u003cli\u003eMazda \/ 3 (3rd Gen) \/ Sedan (BM\/BN) \/ 2013-2018\u003c\/li\u003e\n\u003cli\u003eMazda \/ 6 (3rd Gen) \/ Sedan (GJ\/GL) \/ 2012-Present\u003c\/li\u003e\n\u003cli\u003eMazda \/ 6 (3rd Gen) \/ Wagon (GJ\/GL) \/ 2012-Present\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-5 (1st Gen) \/ SUV (KE) \/ 2012-2017\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-5 (2nd Gen) \/ SUV (KF) \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-9 (2nd Gen) \/ SUV (TC) \/ 2016-Present\u003c\/li\u003e\n\u003cli\u003eTesla \/ Model 3 \/ Sedan (5YJ3) \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eTesla \/ Model Y \/ SUV \/ 2020-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Supra (5th Gen) \/ Coupe (A90) \/ 2019-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780138561848,"sku":"HR-8659-140","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/2017541032810b3a28yc.jpg?v=1678899661"},{"product_id":"hardrace-adjustable-universal-drop-links-10mm-rod-ends-160-199mm","title":"Hardrace Adjustable Universal Drop Links 10mm Rod Ends 160-199mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 160-199mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 160-199mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 160-199mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop link\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAlfa Romeo \/ 147 \/ Hatchback (937) \/ 2000-2010\u003c\/li\u003e\n\u003cli\u003eAlfa Romeo \/ 156 \/ Sedan (932) \/ 1997-2007\u003c\/li\u003e\n\u003cli\u003eAlfa Romeo \/ 156 \/ Wagon (932) \/ 1997-2007\u003c\/li\u003e\n\u003cli\u003eAlfa Romeo \/ GT \/ Coupe (937) \/ 2003-2010\u003c\/li\u003e\n\u003cli\u003eMazda \/ 323 (8th Gen) \/ Hatchback (BJ) \/ 1998-2003\u003c\/li\u003e\n\u003cli\u003eMazda \/ 323 (8th Gen) \/ Sedan (BJ) \/ 1998-2003\u003c\/li\u003e\n\u003cli\u003eMazda \/ Premacy (1st Gen) \/ MPV (CP) (5 Seat) \/ 1999-2005\u003c\/li\u003e\n\u003cli\u003eMazda \/ Premacy (1st Gen) \/ MPV (CP) (7 Seat) \/ 1999-2005\u003c\/li\u003e\n\u003cli\u003eToyota \/ MR2 (2nd Gen) \/ Coupe (W20) \/ 1989-1999\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780138594616,"sku":"HR-8659-180","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20167794239d42x3vs.jpg?v=1678899661"},{"product_id":"hardrace-adjustable-universal-drop-links-10mm-rod-ends-200-239mm","title":"Hardrace Adjustable Universal Drop Links 10mm Rod Ends 200-239mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 200-239mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 200-239mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 200-239mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop link\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHonda \/ Civic 3-Door Hatchback \/ 2007-2011\u003c\/li\u003e\n\u003cli\u003eHonda \/ Civic 5-Door Hatchback \/ 2005-2012\u003c\/li\u003e\n\u003cli\u003eKia \/ Picanto (1st Gen) \/ Hatchback (BA\/SA) \/ 2004-2011\u003c\/li\u003e\n\u003cli\u003eLexus \/ ES (4th Gen) \/ Sedan (XV30) \/ 2001-2006\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (2nd Gen) \/ SUV (XU30) \/ 2003-2009\u003c\/li\u003e\n\u003cli\u003eMINI \/ Mini (1st Gen) \/ Convertible (R52) \/ 2001-2008\u003c\/li\u003e\n\u003cli\u003eMINI \/ Mini (1st Gen) \/ Hatchback (R50) \/ 2001-2008\u003c\/li\u003e\n\u003cli\u003eMINI \/ Mini (1st Gen) \/ Hatchback (R53) \/ 2001-2008\u003c\/li\u003e\n\u003cli\u003eToyota \/ Camry  (7th Gen) \/ Sedan (XV40) \/ 2007-2012\u003c\/li\u003e\n\u003cli\u003eToyota \/ Camry (6th Gen) \/ Sedan (XV30) \/ 2001-2006\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780138627384,"sku":"HR-8659-220","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20168413391313k39g13cv.jpg?v=1678899662"},{"product_id":"hardrace-adjustable-universal-drop-links-10mm-rod-ends-240-279mm","title":"Hardrace Adjustable Universal Drop Links 10mm Rod Ends 240-279mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 240-279mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 240-279mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 240-279mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi \/ A1 (1st Gen) \/ 2010-2018\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (4th Gen) \/ 1998-2007\u003c\/li\u003e\n\u003cli\u003eBMW \/ Z4 (1st Gen) \/ 2003-2009\u003c\/li\u003e\n\u003cli\u003eFord \/ Fiesta (6th Gen) (UKDM MK7) \/ 2008-2017\u003c\/li\u003e\n\u003cli\u003eMazda \/ 2 (3rd Gen) \/ 2007-2014\u003c\/li\u003e\n\u003cli\u003eMazda \/ 3 (4th Gen) \/ 2019-Present\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-3 \/ 2015-Present\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-30 \/ 2019-Present\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Eclipse Cross \/ 2018-Present\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (8th Gen) \/ 2007-2017\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Outlander (2nd Gen) \/ 2007-2012\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Outlander (3rd Gen) \/ 2012-Present\u003c\/li\u003e\n\u003cli\u003eNissan \/ Cube (3rd Gen) \/ 2008-2011\u003c\/li\u003e\n\u003cli\u003eNissan \/ Micra (3rd Gen) \/ 2003-2010\u003c\/li\u003e\n\u003cli\u003eNissan \/ Micra (4th Gen) \/ 2010-2017\u003c\/li\u003e\n\u003cli\u003eSkoda \/ Fabia (2nd Gen) \/ 2007-2014\u003c\/li\u003e\n\u003cli\u003eSkoda \/ Fabia (3rd Gen) \/ 2014-2022\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ SX4 (MK1) \/ 2006-2013\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ SX4 S-Cross \/ 2013-2021\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Swift (MK5) \/ 2010-2017\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Vitara (MK4) \/ 2015-Present\u003c\/li\u003e\n\u003cli\u003eVolkswagen \/ Polo (5th Gen) \/ 2009-2017\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780138922296,"sku":"HR-8659-260","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201662413132313r13w23gq.jpg?v=1678899664"},{"product_id":"hardrace-adjustable-universal-drop-links-10mm-rod-ends-280-319mm","title":"Hardrace Adjustable Universal Drop Links 10mm Rod Ends 280-319mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 280-319mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 280-319mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 280-319mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW \/ 1-Series (1st Gen) \/ 2003-2013\u003c\/li\u003e\n\u003cli\u003eBMW \/ 1-Series (2nd Gen) \/ 2011-2019\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (5th Gen) \/ 2004-2013\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (6th Gen) \/ 2011-2019\u003c\/li\u003e\n\u003cli\u003eBMW \/ 4-Series (2nd Gen) \/ 2020-Present\u003c\/li\u003e\n\u003cli\u003eBMW \/ Z4 (2nd Gen) \/ 2009-2016\u003c\/li\u003e\n\u003cli\u003eFord \/ Kuga (2nd Gen) \/ 2012-2019\u003c\/li\u003e\n\u003cli\u003eFord \/ Mondeo (4th Gen) \/ 2007-2014\u003c\/li\u003e\n\u003cli\u003eHonda \/ Civic 5-Door Hatchback \/ 2022-Present\u003c\/li\u003e\n\u003cli\u003eHonda \/ Jazz (1st Gen) \/ 2002-2008\u003c\/li\u003e\n\u003cli\u003eHonda \/ Jazz (2nd Gen) \/ 2008-2015\u003c\/li\u003e\n\u003cli\u003eHonda \/ Jazz (3rd Gen) \/ 2015-2020\u003c\/li\u003e\n\u003cli\u003eHonda \/ Jazz (4th Gen) \/ 2020-Present\u003c\/li\u003e\n\u003cli\u003eMG \/ ZS \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eMINI \/ Mini (2nd Gen) \/ 2006-2016\u003c\/li\u003e\n\u003cli\u003eMazda \/ 3 (3rd Gen) \/ 2013-2018\u003c\/li\u003e\n\u003cli\u003eMazda \/ 5 (2nd Gen) \/ 2005-2010\u003c\/li\u003e\n\u003cli\u003eMazda \/ 6 (3rd Gen) \/ 2012-Present\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-5 (1st Gen) \/ 2012-2017\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-5 (2nd Gen) \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-9 (2nd Gen) \/ 2016-Present\u003c\/li\u003e\n\u003cli\u003eMini \/ Countryman (3rd Gen) \/ 2023-Present\u003c\/li\u003e\n\u003cli\u003eMini \/ Mini (3rd Gen) \/ 2014-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ S60 (2nd Gen) \/ 2010-2018\u003c\/li\u003e\n\u003cli\u003eVolvo \/ S80 (2nd Gen) \/ 2006-2016\u003c\/li\u003e\n\u003cli\u003eVolvo \/ V60 (1st Gen) \/ 2010-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ V70 (3rd Gen) \/ 2007-2016\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC70 (2nd Gen) \/ 2007-2016\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Porsche 996\/997: For C4\/Turbo Front Side use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780138955064,"sku":"HR-8659-300","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20166241331113w31d1wn.jpg?v=1678899665"},{"product_id":"hardrace-adjustable-universal-drop-links-12mm-rod-ends-104-130mm","title":"Hardrace Adjustable Universal Drop Links 12mm Rod Ends 104-130mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 104-130mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 104-130mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 104-130mm\u003c\/li\u003e\n\u003cli\u003e12mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInfiniti \/ FX (2nd Gen) 2008-2013 \/ SUV (S51) 2008-2013 \/ FX30D 3.0 TD 2010-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ FX (2nd Gen) 2008-2013 \/ SUV (S51) 2008-2013 \/ FX37 3.7 2008-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ FX (2nd Gen) 2008-2013 \/ SUV (S51) 2008-2013 \/ FX50 5.0 2008-2013\u003c\/li\u003e\n\u003cli\u003eLexus \/ LS (1st Gen) 1989-1994 \/ Sedan (XF10) 1989-1994 \/ LS400 4.0 (UCF10) 1989-1992\u003c\/li\u003e\n\u003cli\u003eLexus \/ LS (1st Gen) 1989-1994 \/ Sedan (XF10) 1989-1994 \/ LS400 4.0 (UCF11) 1992-1994\u003c\/li\u003e\n\u003cli\u003eLexus \/ LS (2nd Gen) 1994-2000 \/ Sedan (XF20) 1994-2000 \/ LS400 4.0 (UCF20\/UCF21) 1994-2000\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (3rd Gen) 2008-2015 \/ SUV (AL10) 2008-2015 \/ RX270 2.7 (AGL10) 2008-2015\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (3rd Gen) 2008-2015 \/ SUV (AL10) 2008-2015 \/ RX350 3.5 (AWD) (GGL15) 2008-2012\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (3rd Gen) 2008-2015 \/ SUV (AL10) 2008-2015 \/ RX350 3.5 (GRL10) 2008-2012\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (3rd Gen) 2008-2015 \/ SUV (AL10) 2008-2015 \/ RX350 3.5 (GYL10) 2008-2015\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (3rd Gen) 2008-2015 \/ SUV (AL10) 2008-2015 \/ RX450h Hybrid 3.5 (AWD) (GYL15) 2008-2015\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (3rd Gen) 2008-2015 \/ SUV (AL10) 2008-2015 \/ RX450h Hybrid 3.5 (GYL10) 2008-2015\u003c\/li\u003e\n\u003cli\u003eFord \/ Kuga (3rd Gen) 2019-Present \/ SUV (CX482) 2019-Present \/ Kuga 1.5 Turbo 2019-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Kuga (3rd Gen) 2019-Present \/ SUV (CX482) 2019-Present \/ Kuga 2.0 Turbo 2019-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Kuga (3rd Gen) 2019-Present \/ SUV (CX482) 2019-Present \/ Kuga 2.0TD 2019-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Kuga (3rd Gen) 2019-Present \/ SUV (CX482) 2019-Present \/ Kuga 2.5 Hybrid 2019-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Kuga (3rd Gen) 2019-Present \/ SUV (CX482) 2019-Present \/ Kuga 2.5 PHEV 2019-Present\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (4th Gen) 2015-2023 \/ SUV (AL20) 2015-2023 \/ RX200t 2.0 Turbo (AGL20) 2015-2023\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (4th Gen) 2015-2023 \/ SUV (AL20) 2015-2023 \/ RX200t 2.0 Turbo (AWD) (AGL25) 2015-2023\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (4th Gen) 2015-2023 \/ SUV (AL20) 2015-2023 \/ RX350 3.5 (AWD) (GGL25) 2015-2023\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (4th Gen) 2015-2023 \/ SUV (AL20) 2015-2023 \/ RX450h Hybrid 3.5 (AWD) (GYL25) 2015-2023\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (4th Gen) 2015-2023 \/ SUV (AL20) 2015-2023 \/ RX450h Hybrid 3.5 (GYL20) 2015-2023\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139020600,"sku":"HR-8793-110","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201721616354516k35m45yu.jpg?v=1678899666"},{"product_id":"hardrace-adjustable-universal-drop-links-12mm-rod-ends-123-162mm","title":"Hardrace Adjustable Universal Drop Links 12mm Rod Ends 123-162mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 123-162mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 123-162mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 123-162mm\u003c\/li\u003e\n\u003cli\u003e12mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFord \/ Mustang (6th Gen) \/ Convertible (S550) \/ 2014-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Mustang (6th Gen) \/ Coupe (S550) \/ 2014-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ S60 (1st Gen) \/ Sedan (P24) \/ 2000-2009\u003c\/li\u003e\n\u003cli\u003eVolvo \/ S80 (1st Gen) \/ Sedan (TS) \/ 1998-2006\u003c\/li\u003e\n\u003cli\u003eVolvo \/ V70 (2nd Gen) \/ Wagon (Cross Country) \/ 2000-2007\u003c\/li\u003e\n\u003cli\u003eVolvo \/ V70 (2nd Gen) \/ Wagon (SW) \/ 2000-2007\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC70 (1st Gen) \/ Wagon \/ 2000-2007\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC90 (1st Gen) \/ SUV \/ 2002-2014\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Ace use (Rear).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139184440,"sku":"HR-8793-140","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/2017291348913z48b9jg.jpg?v=1678899668"},{"product_id":"hardrace-adjustable-universal-drop-links-12mm-rod-ends-163-202mm","title":"Hardrace Adjustable Universal Drop Links 12mm Rod Ends 163-202mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 163-202mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 163-202mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 163-202mm\u003c\/li\u003e\n\u003cli\u003e12mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW \/ 5-Series (6th Gen) \/ Gran Turismo (F07) \/ 2008-2017\u003c\/li\u003e\n\u003cli\u003eVolvo \/ S60 (3rd Gen) \/ Sedan \/ 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ S90 (2nd Gen) \/ Sedan \/ 2016-2025\u003c\/li\u003e\n\u003cli\u003eVolvo \/ V60 (2nd Gen) \/ Wagon \/ 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ V90 (2nd Gen) \/ Wagon \/ 2016-2025\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC60 (2nd Gen) \/ SUV \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC90 (2nd Gen) \/ SUV \/ 2014-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e BMW G30: For AWD use (Front).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-universal-adjustable-stabiliser-link-2pcs-range-90-110mm-12mm-stud-rod-end\"\u003eHardrace Universal Adjustable Stabiliser Link 2pcs Range 90-110mm 12mm Stud Rod End\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139217208,"sku":"HR-8793-180","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20172913484113l48d41tj.jpg?v=1678899668"},{"product_id":"hardrace-adjustable-universal-drop-links-12mm-rod-ends-203-242mm","title":"Hardrace Adjustable Universal Drop Links 12mm Rod Ends 203-242mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 203-242mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 203-242mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 203-242mm\u003c\/li\u003e\n\u003cli\u003e12mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW \/ 5-Series (7th Gen) \/ Sedan (G30) \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eBMW \/ 5-Series (7th Gen) \/ Touring (G31) \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eCadillac \/ ATS \/ Sedan \/ 2012-Present\u003c\/li\u003e\n\u003cli\u003eCadillac \/ CTS (3rd Gen) \/ Sedan \/ 2013-Present\u003c\/li\u003e\n\u003cli\u003eChevrolet \/ Camaro (6th Gen) \/ Coupe \/ 2015-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Mustang (6th Gen) \/ Convertible (S550) \/ 2014-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Mustang (6th Gen) \/ Coupe (S550) \/ 2014-Present\u003c\/li\u003e\n\u003cli\u003eSaab \/ 95 \/ 1999-2008\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e BMW G30: For RWD use (Front).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139249976,"sku":"HR-8793-220","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20172913491013n49k10fa.jpg?v=1678899669"},{"product_id":"hardrace-adjustable-universal-drop-links-12mm-rod-ends-243-282mm","title":"Hardrace Adjustable Universal Drop Links 12mm Rod Ends 243-282mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 243-282mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 243-282mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 243-282mm\u003c\/li\u003e\n\u003cli\u003e12mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLexus \/ ES (4th Gen) \/ Sedan (XV30) \/ 2001-2006\u003c\/li\u003e\n\u003cli\u003eLexus \/ GS (1st Gen) \/ Sedan (S140) \/ 1991-1997\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (2nd Gen) \/ SUV (XU30) \/ 2003-2009\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (3rd Gen) \/ SUV (AL10) \/ 2008-2015\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (4th Gen) \/ SUV (AL20) \/ 2015-2023\u003c\/li\u003e\n\u003cli\u003eMG \/ HS \/ SUV \/ 2019-Present\u003c\/li\u003e\n\u003cli\u003eNissan \/ Juke \/ SUV (F15) \/ 2010-Present\u003c\/li\u003e\n\u003cli\u003eTesla \/ Model 3 \/ Sedan (5YJ3) \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eTesla \/ Model Y \/ SUV \/ 2020-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Camry  (7th Gen) \/ Sedan (XV40) \/ 2007-2012\u003c\/li\u003e\n\u003cli\u003eToyota \/ Camry (6th Gen) \/ Sedan (XV30) \/ 2001-2006\u003c\/li\u003e\n\u003cli\u003eToyota \/ Camry (9th Gen) \/ Sedan (XV70) \/ 2017-2024\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (10th Gen) \/ Sedan (E150) \/ 2007-2013\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (11th Gen) \/ Sedan (E170) \/ 2013-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) \/ Hatchback (E120) \/ 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) \/ Sedan (E120) \/ 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) \/ Wagon (E120) \/ 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Previa (2nd Gen) \/ MPV (XR30) \/ 2000-2006\u003c\/li\u003e\n\u003cli\u003eToyota \/ RAV4 (6th Gen) \/ SUV (XA60) \/ 2025-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-reinforced-front-drop-links-2pc-set-toyota-camry-xv30\"\u003eHardrace Reinforced Front Drop Links 2Pc Set Toyota Camry XV30 01-06\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-reinforced-rear-drop-links-2pc-set-toyota-camry-xv30\"\u003eHardrace Reinforced Rear Drop Links 2Pc Set Toyota Camry XV30 01-06\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-reinforced-20mm-shortened-front-stabilizer-links-2pc-set-toyota-camry-xv40-06-11\"\u003eHardrace Reinforced 20mm Shortened Front Stabilizer Links 2Pc Set Toyota Camry XV40 06-11\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139282744,"sku":"HR-8793-260","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20172913493213w49o32is.jpg?v=1678899669"},{"product_id":"hardrace-adjustable-universal-drop-links-12mm-rod-ends-283-322mm","title":"Hardrace Adjustable Universal Drop Links 12mm Rod Ends 283-322mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 283-322mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 283-322mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 283-322mm\u003c\/li\u003e\n\u003cli\u003e12mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi: A3 (2nd Gen) 2003-2013, A3 (3rd Gen) 2012-2020, Q3 2011-Present, TT (2nd Gen) 2006-2014\u003c\/li\u003e\n\u003cli\u003eBMW: 5-Series (6th Gen) 2008-2017, 7-Series (5th Gen) 2008-2015\u003c\/li\u003e\n\u003cli\u003eFord: Focus (4th Gen) 2018-Present, Kuga (3rd Gen) 2019-Present, Mondeo (5th Gen) 2014-Present\u003c\/li\u003e\n\u003cli\u003eHyundai: Elantra (4th Gen) 2006-2011, Elantra (5th Gen) 2011-2015, Veloster (2nd Gen) 2017-Present, i30 (3rd Gen) 2017-Present\u003c\/li\u003e\n\u003cli\u003eMercedes-Benz: C-Class (3rd Gen) 2007-2015, E-Class (4th Gen) 2009-2017\u003c\/li\u003e\n\u003cli\u003eNissan: Juke 2010-Present, Murano (1st Gen) 2002-2008\u003c\/li\u003e\n\u003cli\u003eSaab: 95 2008-2010\u003c\/li\u003e\n\u003cli\u003eSeat: Altea 2004-2015, Leon (2nd Gen) 2005-2012, Toledo (3rd Gen) 2004-2009\u003c\/li\u003e\n\u003cli\u003eSkoda: Karoq 2017-Present, Kodiaq (1st Gen) 2016-2023, Kodiaq (2nd Gen) 2023-Present, Octavia (3rd Gen) 2012-Present, Octavia (4th Gen) 2019-Present, Superb (3rd Gen) 2015-2023, Superb (4th Gen) 2023-Present\u003c\/li\u003e\n\u003cli\u003eSubaru: Forester (5th Gen) 2018-2023, XV (2nd Gen) 2018-2022\u003c\/li\u003e\n\u003cli\u003eTesla: Model 3 2017-Present, Model Y 2020-Present\u003c\/li\u003e\n\u003cli\u003eToyota: Auris (1st Gen) 2006-2012, Auris (2nd Gen) 2012-Present, Corolla (10th Gen) 2007-2013, Corolla (11th Gen) 2013-Present, Corolla (9th Gen) 2002-2007, Prius (2nd Gen) 2003-2009\u003c\/li\u003e\n\u003cli\u003eVolkswagen: Caddy (4th Gen) 2020-Present, Golf (5th Gen) 2003-2009, Golf (6th Gen) 2008-2016, Golf (7th Gen) 2012-2020, Jetta (5th Gen) 2005-2010, Jetta (6th Gen) 2010-2018, Passat (6th Gen) 2005-2010, Passat (7th Gen) 2010-2014, Passat (8th Gen) 2014-2023, Passat (9th Gen) 2023-Present, Scirocco (3rd Gen) 2008-2017, Sharan (2nd Gen) 2010-Present, Tiguan (1st Gen) 2007-2016, Tiguan (2nd Gen) 2016-2025, Tiguan (3rd Gen) 2023-Present, Touran (2nd Gen) 2015-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e FOR LOWERED PQ35\/PQ46\/MQB Models (Front).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139413816,"sku":"HR-8793-300","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20172913494813r49d48py.jpg?v=1678899671"},{"product_id":"hardrace-adjustable-universal-drop-links-12mm-rod-ends-323-362mm","title":"Hardrace Adjustable Universal Drop Links 12mm Rod Ends 323-362mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 323-362mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 323-362mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 323-362mm\u003c\/li\u003e\n\u003cli\u003e12mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi: A3 (2nd Gen) 2003-2013, A3 (3rd Gen) 2012-2020, Q3 2011-Present, TT (2nd Gen) 2006-2014, TT (3rd Gen) 2014-Present\u003c\/li\u003e\n\u003cli\u003eHyundai: Santa Fe (2nd Gen) 2006-2012, Santa Fe (3rd Gen) 2012-2018\u003c\/li\u003e\n\u003cli\u003eInfiniti: Q30 (1st Gen) 2015-2019, QX30 2016-2019\u003c\/li\u003e\n\u003cli\u003eLexus: CT 2010-Present, NX 2014-Present, UX 2018-Present\u003c\/li\u003e\n\u003cli\u003eMercedes-Benz: A-Class (3rd Gen) 2012-2018, B-Class (2nd Gen) 2011-2019, CLA-Class (1st Gen) 2013-2019, GLA-Class (1st Gen) 2013-2020\u003c\/li\u003e\n\u003cli\u003eSaab: 9-3 (2nd Gen) 2004-2011, 9-3 (2nd Gen) 2004-2011 2003-2012\u003c\/li\u003e\n\u003cli\u003eSkoda: Karoq 2017-Present, Kodiaq (1st Gen) 2016-2023, Kodiaq (2nd Gen) 2023-Present, Octavia (3rd Gen) 2012-Present, Octavia (4th Gen) 2019-Present, Superb (3rd Gen) 2015-2023, Superb (4th Gen) 2023-Present\u003c\/li\u003e\n\u003cli\u003eToyota: C-HR (1st Gen) 2016-Present, Corolla (12th Gen) 2018-Present, Prius (3rd Gen) 2009-2016, Prius (4th Gen) 2016-2019, Prius (5th Gen) 2023-Present, RAV4 (3rd Gen) 2005-2013, RAV4 (4th Gen) 2013-2018, RAV4 (5th Gen) 2018-2025, Yaris (2nd Gen) 2005-2012\u003c\/li\u003e\n\u003cli\u003eVolkswagen: Caddy (4th Gen) 2020-Present, Golf (4th Gen) 1997-2006, Golf (5th Gen) 2003-2009, Golf (6th Gen) 2008-2016, Golf (7th Gen) 2012-2020, Jetta (5th Gen) 2005-2010, Jetta (6th Gen) 2010-2018, Passat (6th Gen) 2005-2010, Passat (7th Gen) 2010-2014, Passat (8th Gen) 2014-2023, Passat (9th Gen) 2023-Present, Scirocco (3rd Gen) 2008-2017, Sharan (2nd Gen) 2010-Present, Tiguan (1st Gen) 2007-2016, Tiguan (2nd Gen) 2016-2025, Tiguan (3rd Gen) 2023-Present, Touran (2nd Gen) 2015-Present\u003c\/li\u003e\n\u003cli\u003eVolvo: S60 (1st Gen) 2000-2009, S80 (1st Gen) 1998-2006, V70 (2nd Gen) 2000-2007, XC70 (1st Gen) 2000-2007\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e For PQ35\/PQ46\/MQB Models OE Replacement (Front).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139446584,"sku":"HR-8793-340","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/2017291350913s50l9lg.jpg?v=1678899672"}],"url":"https:\/\/hardraceshop.com\/collections\/hardrace-suzuki-jimny-suspension-parts.oembed","provider":"Hardrace Shop","version":"1.0","type":"link"}