{"title":"Hardrace Toyota Corolla Suspension Parts","description":"\u003cp\u003eHardrace Toyota Corolla suspension parts from the 1983-1987 AE86 through the AE100 and AE110 and the E120 to E170 Corolla and Altis, to the 2018 on Corolla. The range covers adjustable rear lateral arms and front tension rods, hardened rubber control arms and bushes, chassis braces, anti roll bars, rear torsion bars, drop links, tie rod ends and engine and transmission mounts.\u003c\/p\u003e\u003cp\u003eThe AE86 has the most: adjustable rear lateral links in hardened rubber or spherical bearing form (short and long), adjustable tension rods, max angle and RC tie rod ends for steering lock, reinforced front and rear drop links, and hardened engine and transmission mounts that stop the drivetrain moving under load. Spherical arms are sharper but noisier, for drift and track cars; rubber suits a road car.\u003c\/p\u003e\u003cp\u003eFor the front wheel drive Corolla and Altis from 2000 on, hardened rubber front lower arm bushes and complete \u003ca href=\"\/collections\/hardrace-control-arms\"\u003econtrol arms\u003c\/a\u003e firm up a worn front end, the 28mm front anti roll bar and rear add-on bar cut body roll, and the 2018 on Corolla gets strut, lower and rear subframe braces. Browse the whole \u003ca href=\"\/collections\/hardrace-toyota-suspension-components\"\u003eToyota\u003c\/a\u003e range or filter by registration above. Free UK delivery over £100.\u003c\/p\u003e","products":[{"product_id":"hardrace-4-point-lower-front-brace-3pc-set-toyota-corolla-13","title":"Hardrace 4 Point Lower Front Brace Toyota Corolla 13+","description":"\u003ch2\u003eHardrace 4 Point Front Lower Brace for Toyota Corolla\/Altis\/Auris E170\/E180 (2013-2018) – Stiffer Chassis, Sharper Handling\u003c\/h2\u003e\n\u003cp\u003eThe floor and lower chassis flex under hard cornering, which lets the suspension geometry move and makes the car feel less precise. This Hardrace 4 point front lower brace ties key mounting points under the car together, so the chassis stays stiff and the car feels sharper and more consistent.\u003c\/p\u003e\n\u003cp\u003eIt bolts to existing mounting points with no cutting or drilling.\u003c\/p\u003e\n\u003cp\u003eIt suits the Toyota Corolla\/Altis\/Auris E170\/E180 (2013-2018).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStiffens the lower chassis\u003c\/li\u003e\n\u003cli\u003eReduces body flex under load\u003c\/li\u003e\n\u003cli\u003eSharper, more consistent handling\u003c\/li\u003e\n\u003cli\u003eBolts to existing mounting points\u003c\/li\u003e\n\u003cli\u003eNo cutting or drilling required\u003c\/li\u003e\n\u003cli\u003e3-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4 point front lower brace (3 pieces in total)\u003c\/li\u003e\n\u003cli\u003eFitting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eToyota Corolla\/altis\/auris 11th E170\/E180  2013-2018\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e For US\/TW spec sedan (E170) use only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on a ramp or axle stands. Bolt the brace to the existing mounting points under the car and tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No cutting, drilling or alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. The brace does not change the suspension geometry.\u003c\/p\u003e\n\u003ch3\u003eWill it reduce ground clearance?\u003c\/h3\u003e\n\u003cp\u003eIt sits close to the floor or subframe, so it only reduces ground clearance slightly.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eNo. A brace stiffens the chassis, not the suspension, so the ride comfort is largely unchanged.\u003c\/p\u003e\n\u003ch3\u003eCan I fit it with other braces?\u003c\/h3\u003e\n\u003cp\u003eYes. Combining front, middle and rear braces stiffens more of the chassis for an even tighter feel.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780104646968,"sku":"HR-Q0091","price":177.36,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201862510473410p47z34yh.jpg?v=1678899314"},{"product_id":"hardrace-strut-bar-1pc-toyota-altis-07","title":"Hardrace Strut Bar Toyota Altis 07+","description":"\u003ch2\u003eHardrace Front Strut Brace for Toyota Corolla E150\/E170 (2007-Present) – Sharper Steering, Stiffer Front End\u003c\/h2\u003e\n\u003cp\u003eUnder hard cornering the front strut towers flex, which blurs steering feel and lets the suspension geometry shift. This Hardrace front strut brace ties them together, so the front end stays stiff and the steering stays sharp and precise.\u003c\/p\u003e\n\u003cp\u003eIt bolts to existing mounting points with no cutting or drilling.\u003c\/p\u003e\n\u003cp\u003eIt suits the Toyota Corolla E150\/E170 (2007-Present).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTies the strut towers together\u003c\/li\u003e\n\u003cli\u003eReduces body flex under cornering\u003c\/li\u003e\n\u003cli\u003eSharper, more precise steering\u003c\/li\u003e\n\u003cli\u003eBolts to existing mounting points\u003c\/li\u003e\n\u003cli\u003eNo cutting or drilling required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront strut brace\u003c\/li\u003e\n\u003cli\u003eFitting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eToyota \/ Corolla (10th Gen) 2007-2013 \/ Sedan (E150) 2007-2013 \/ Corolla 1.3 2008-2013\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (10th Gen) 2007-2013 \/ Sedan (E150) 2007-2013 \/ Corolla 1.4 TD 2009-2013\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (10th Gen) 2007-2013 \/ Sedan (E150) 2007-2013 \/ Corolla 1.6 2007-2013\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (10th Gen) 2007-2013 \/ Sedan (E150) 2007-2013 \/ Corolla 2.0 TD 2007-2013\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (11th Gen) 2013-2018 \/ Sedan (E170) 2013-2018 \/ Corolla 1.3 (99HP\/73KW) 2013-2018\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (11th Gen) 2013-2018 \/ Sedan (E170) 2013-2018 \/ Corolla 1.4 TD (90HP\/66KW) 2013-2018\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (11th Gen) 2013-2018 \/ Sedan (E170) 2013-2018 \/ Corolla 1.6 (132HP\/97KW) 2013-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e For left-hand drive models; Corolla 10\/11th: For E140\/E170 Sedan Only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eRemove the strut top nuts or mounting bolts, fit the brace over them and refit the nuts. Tighten to the vehicle manufacturer's torque figures with the car on its wheels, then check clearance around the bonnet and engine bay before driving. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. The brace does not change the suspension geometry.\u003c\/p\u003e\n\u003ch3\u003eWill it fit under the bonnet?\u003c\/h3\u003e\n\u003cp\u003eYes, it is designed to fit under the standard bonnet on the listed models. Check clearance around any aftermarket intake or engine parts.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eNo. A brace stiffens the chassis, not the suspension, so the ride comfort is largely unchanged.\u003c\/p\u003e\n\u003ch3\u003eCan I fit it with other braces?\u003c\/h3\u003e\n\u003cp\u003eYes. Combining front, middle and rear braces stiffens more of the chassis for an even tighter feel.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780104778040,"sku":"HR-8998","price":119.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201711151042410t4g24cy.jpg?v=1678899315"},{"product_id":"hardrace-toyota-corolla-altis-18-corolla-cross-20-front-strut-brace-1pcs-set","title":"Hardrace Front Strut Brace Toyota Corolla 18+ Altis 18+ Corolla Cross 20+","description":"\u003ch2\u003eHardrace Front Strut Brace for Toyota Corolla E210 (2018-Present) – Sharper Steering, Stiffer Front End\u003c\/h2\u003e\n\u003cp\u003eUnder hard cornering the front strut towers flex, which blurs steering feel and lets the suspension geometry shift. This Hardrace front strut brace ties them together, so the front end stays stiff and the steering stays sharp and precise.\u003c\/p\u003e\n\u003cp\u003eIt bolts to existing mounting points with no cutting or drilling.\u003c\/p\u003e\n\u003cp\u003eIt suits the Toyota Corolla E210 (2018-Present).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTies the strut towers together\u003c\/li\u003e\n\u003cli\u003eReduces body flex under cornering\u003c\/li\u003e\n\u003cli\u003eSharper, more precise steering\u003c\/li\u003e\n\u003cli\u003eBolts to existing mounting points\u003c\/li\u003e\n\u003cli\u003eNo cutting or drilling required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront strut brace\u003c\/li\u003e\n\u003cli\u003eFitting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eToyota \/ Corolla (12th Gen) 2018-Present \/ Hatchback (E210) 2019-Present \/ Corolla 1.2T 2019-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (12th Gen) 2018-Present \/ Hatchback (E210) 2019-Present \/ Corolla 1.8 Hybrid 2019-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (12th Gen) 2018-Present \/ Hatchback (E210) 2019-Present \/ Corolla 2.0 Hybrid 2019-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eRemove the strut top nuts or mounting bolts, fit the brace over them and refit the nuts. Tighten to the vehicle manufacturer's torque figures with the car on its wheels, then check clearance around the bonnet and engine bay before driving. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-toyota-corolla-altis-18-corolla-cross-20-front-lower-rear-brace-1pcs-set\"\u003eHardrace Front Lower Rear Brace 1Pcs Toyota Corolla 18+ Altis 18+ Corolla Cross 20+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-toyota-corolla-altis-18-rear-subframe-brace-1pcs-set\"\u003eHardrace Rear Subframe Brace 1Pcs Toyota Corolla 18+ Altis 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-toyota-corolla-altis-18-brake-master-cylinder-stopper-1pcs-set-not-for-hybrid-models-use\"\u003eHardrace Brake Master Cylinder Stopper 1Pcs Not For Hybrid Models Toyota Corolla Altis 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. The brace does not change the suspension geometry.\u003c\/p\u003e\n\u003ch3\u003eWill it fit under the bonnet?\u003c\/h3\u003e\n\u003cp\u003eYes, it is designed to fit under the standard bonnet on the listed models. Check clearance around any aftermarket intake or engine parts.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eNo. A brace stiffens the chassis, not the suspension, so the ride comfort is largely unchanged.\u003c\/p\u003e\n\u003ch3\u003eCan I fit it with other braces?\u003c\/h3\u003e\n\u003cp\u003eYes. Combining front, middle and rear braces stiffens more of the chassis for an even tighter feel.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780104810808,"sku":"HR-Q0571","price":141.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0571_main.jpg?v=1678899316"},{"product_id":"hardrace-toyota-corolla-altis-18-corolla-cross-20-front-lower-rear-brace-1pcs-set","title":"Hardrace Front Lower Rear Brace Toyota Corolla 18+ Altis 18+ Corolla Cross","description":"\u003ch2\u003eHardrace Front Lower Rear Brace for Toyota Corolla E210 (2018-Present) – Stiffer Chassis, Sharper Handling\u003c\/h2\u003e\n\u003cp\u003eThe floor and lower chassis flex under hard cornering, which lets the suspension geometry move and makes the car feel less precise. This Hardrace front lower rear brace ties key mounting points under the car together, so the chassis stays stiff and the car feels sharper and more consistent.\u003c\/p\u003e\n\u003cp\u003eIt bolts to existing mounting points with no cutting or drilling.\u003c\/p\u003e\n\u003cp\u003eIt suits the Toyota Corolla E210 (2018-Present).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStiffens the lower chassis\u003c\/li\u003e\n\u003cli\u003eReduces body flex under load\u003c\/li\u003e\n\u003cli\u003eSharper, more consistent handling\u003c\/li\u003e\n\u003cli\u003eBolts to existing mounting points\u003c\/li\u003e\n\u003cli\u003eNo cutting or drilling required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront lower rear brace\u003c\/li\u003e\n\u003cli\u003eFitting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eToyota \/ Corolla (12th Gen) 2018-Present \/ Hatchback (E210) 2019-Present \/ Corolla 1.2T 2019-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (12th Gen) 2018-Present \/ Hatchback (E210) 2019-Present \/ Corolla 1.8 Hybrid 2019-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (12th Gen) 2018-Present \/ Hatchback (E210) 2019-Present \/ Corolla 2.0 Hybrid 2019-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on a ramp or axle stands. Bolt the brace to the existing mounting points under the car and tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No cutting, drilling or alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-toyota-corolla-altis-18-rear-subframe-brace-1pcs-set\"\u003eHardrace Rear Subframe Brace 1Pcs Toyota Corolla 18+ Altis 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-toyota-corolla-altis-18-brake-master-cylinder-stopper-1pcs-set-not-for-hybrid-models-use\"\u003eHardrace Brake Master Cylinder Stopper 1Pcs Not For Hybrid Models Toyota Corolla Altis 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-toyota-corolla-altis-18-corolla-cross-20-front-strut-brace-1pcs-set\"\u003eHardrace Front Strut Brace 1Pcs Toyota Corolla 18+ Altis 18+ Corolla Cross 20+\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. The brace does not change the suspension geometry.\u003c\/p\u003e\n\u003ch3\u003eWill it reduce ground clearance?\u003c\/h3\u003e\n\u003cp\u003eIt sits close to the floor or subframe, so it only reduces ground clearance slightly.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eNo. A brace stiffens the chassis, not the suspension, so the ride comfort is largely unchanged.\u003c\/p\u003e\n\u003ch3\u003eCan I fit it with other braces?\u003c\/h3\u003e\n\u003cp\u003eYes. Combining front, middle and rear braces stiffens more of the chassis for an even tighter feel.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780104843576,"sku":"HR-Q0575","price":70.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0575_main.jpg?v=1678899316"},{"product_id":"hardrace-toyota-corolla-altis-18-rear-subframe-brace-1pcs-set","title":"Hardrace Rear Subframe Brace Toyota Corolla 18+ Altis 18+","description":"\u003ch2\u003eHardrace Rear Subframe Brace for Toyota Corolla E210 (2018-Present) – Stiffer Chassis, Sharper Handling\u003c\/h2\u003e\n\u003cp\u003eThe subframe carries the suspension, and under hard cornering and braking it can flex and shift on its mounts. This Hardrace rear subframe brace stiffens it and ties it to the chassis, so the suspension stays where it should and the car feels tighter and more planted.\u003c\/p\u003e\n\u003cp\u003eIt bolts to existing mounting points with no cutting or drilling.\u003c\/p\u003e\n\u003cp\u003eIt suits the Toyota Corolla E210 (2018-Present).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStiffens the subframe\u003c\/li\u003e\n\u003cli\u003eKeeps the suspension geometry consistent\u003c\/li\u003e\n\u003cli\u003eTighter, more planted feel\u003c\/li\u003e\n\u003cli\u003eBolts to existing mounting points\u003c\/li\u003e\n\u003cli\u003eNo cutting or drilling required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear subframe brace\u003c\/li\u003e\n\u003cli\u003eFitting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eToyota \/ Corolla (12th Gen) 2018-Present \/ Hatchback (E210) 2019-Present \/ Corolla 1.2T 2019-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (12th Gen) 2018-Present \/ Hatchback (E210) 2019-Present \/ Corolla 1.8 Hybrid 2019-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (12th Gen) 2018-Present \/ Hatchback (E210) 2019-Present \/ Corolla 2.0 Hybrid 2019-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on a ramp or axle stands. Bolt the brace to the existing mounting points around the subframe and tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No cutting, drilling or alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-toyota-corolla-altis-18-corolla-cross-20-front-lower-rear-brace-1pcs-set\"\u003eHardrace Front Lower Rear Brace 1Pcs Toyota Corolla 18+ Altis 18+ Corolla Cross 20+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-toyota-corolla-altis-18-brake-master-cylinder-stopper-1pcs-set-not-for-hybrid-models-use\"\u003eHardrace Brake Master Cylinder Stopper 1Pcs Not For Hybrid Models Toyota Corolla Altis 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-toyota-corolla-altis-18-corolla-cross-20-front-strut-brace-1pcs-set\"\u003eHardrace Front Strut Brace 1Pcs Toyota Corolla 18+ Altis 18+ Corolla Cross 20+\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. The brace does not change the suspension geometry.\u003c\/p\u003e\n\u003ch3\u003eWill it reduce ground clearance?\u003c\/h3\u003e\n\u003cp\u003eIt sits close to the floor or subframe, so it only reduces ground clearance slightly.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eNo. A brace stiffens the chassis, not the suspension, so the ride comfort is largely unchanged.\u003c\/p\u003e\n\u003ch3\u003eCan I fit it with other braces?\u003c\/h3\u003e\n\u003cp\u003eYes. Combining front, middle and rear braces stiffens more of the chassis for an even tighter feel.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780104941880,"sku":"HR-Q0576","price":70.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0576_main.jpg?v=1678899317"},{"product_id":"hardrace-front-lower-control-arm-with-hardened-rubber-bushes-2pc-set-toyota-corolla-altis-e120-e130-e140-e150","title":"Hardrace Front Lower Control Arm With Hardened Rubber Bushes Toyota 00-18","description":"\u003ch2\u003eHardrace Front Lower Arms Hardened Rubber for Toyota Corolla E120 (2002-2007) – Firmer Location, Sharper Handling\u003c\/h2\u003e\n\u003cp\u003eFactory control arms are built for comfort, with soft rubber bushes that let the wheel move around under cornering, braking and acceleration. These Hardrace front lower arms are an upgrade over the factory parts. Each one locates the suspension far more firmly, so the car feels sharper and more consistent through corners and over bumps.\u003c\/p\u003e\n\u003cp\u003eThey use hardened rubber bushes, a high-strength, anti-crack compound that is firmer than the factory bushes but still absorbs vibration.\u003c\/p\u003e\n\u003cp\u003eIt suits the Toyota Corolla (9th Gen) 2002-2007.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer suspension location than the factory arms\u003c\/li\u003e\n\u003cli\u003eSharper, more consistent handling\u003c\/li\u003e\n\u003cli\u003eHardened rubber bushes for firm, quiet control\u003c\/li\u003e\n\u003cli\u003eHigh-strength steel construction\u003c\/li\u003e\n\u003cli\u003eSupplied complete with bushes or joints fitted, so no press is needed\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront lower arms (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Hatchback (E120) 2002-2007 \/ Corolla 1.4 (ZZE120) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Hatchback (E120) 2002-2007 \/ Corolla 1.4 TD (NDE120) 2004-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Hatchback (E120) 2002-2007 \/ Corolla 1.6 (ZZE121) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Hatchback (E120) 2002-2007 \/ Corolla 1.8 (ZZE123) (190HP\/140KW) 2002-2005\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Hatchback (E120) 2002-2007 \/ Corolla 1.8 Compressor (ZZE123) (215HP\/158KW) 2005-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Hatchback (E120) 2002-2007 \/ Corolla 2.0 TD (CDE120) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Sedan (E120) 2002-2007 \/ Corolla 1.4 (ZZE120) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Sedan (E120) 2002-2007 \/ Corolla 1.4 TD (NDE120) 2004-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Sedan (E120) 2002-2007 \/ Corolla 1.6 (ZZE121) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Sedan (E120) 2002-2007 \/ Corolla 2.0 TD (CDE120) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Wagon (E120) 2002-2007 \/ Corolla Wagon 1.4 (ZZE120) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Wagon (E120) 2002-2007 \/ Corolla Wagon 1.4 TD (NDE120) 2004-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Wagon (E120) 2002-2007 \/ Corolla Wagon 1.6 (ZZE121) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Wagon (E120) 2002-2007 \/ Corolla Wagon 2.0 TD (CDE120) 2002-2007\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Not for Corolla 10\u0026amp;11th Hatchback (Auris).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on axle stands or a ramp. Remove the factory arm and bolt the Hardrace arm in its place; it comes complete with its bushes or joints fitted, so no press is needed. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes. Have a full four-wheel alignment done after fitting.\u003c\/p\u003e\n\u003ch3\u003eDoes it come with the bushes fitted?\u003c\/h3\u003e\n\u003cp\u003eYes. The arm comes complete with its bushes or joints already fitted, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eOnly slightly. The hardened rubber is firmer than the factory bushes but still absorbs vibration, so it stays comfortable for everyday driving.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. Not for Corolla 10\u0026amp;11th Hatchback (Auris).\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780105007416,"sku":"HR-7558","price":341.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20172211710317b10i3bq.jpg?v=1678899319"},{"product_id":"hardrace-toyota-corolla-altis-19-front-lower-control-arm-hardened-rubber-2pcs-set","title":"Hardrace Front Lower Control Arm Hardened Rubber Toyota Corolla Altis 19+","description":"\u003ch2\u003eHardrace Front Lower Control Arms Hardened Rubber for Toyota Corolla E210 (2018-Present) and Toyota Prius XW50 (2016-2019) – Firmer Location, Sharper Handling\u003c\/h2\u003e\n\u003cp\u003eFactory control arms are built for comfort, with soft rubber bushes that let the wheel move around under cornering, braking and acceleration. These Hardrace front lower control arms are an upgrade over the factory parts. Each one locates the suspension far more firmly, so the car feels sharper and more consistent through corners and over bumps.\u003c\/p\u003e\n\u003cp\u003eThey use hardened rubber bushes, a high-strength, anti-crack compound that is firmer than the factory bushes but still absorbs vibration.\u003c\/p\u003e\n\u003cp\u003eIt suits the Toyota Corolla (12th Gen) 2018-Present and Toyota Prius (4th Gen) 2016-2019.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer suspension location than the factory arms\u003c\/li\u003e\n\u003cli\u003eSharper, more consistent handling\u003c\/li\u003e\n\u003cli\u003eHardened rubber bushes for firm, quiet control\u003c\/li\u003e\n\u003cli\u003eHigh-strength steel construction\u003c\/li\u003e\n\u003cli\u003eSupplied complete with bushes or joints fitted, so no press is needed\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront lower control arms (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eToyota \/ Corolla (12th Gen) 2018-Present \/ Hatchback (E210) 2019-Present \/ Corolla 1.2T 2019-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (12th Gen) 2018-Present \/ Hatchback (E210) 2019-Present \/ Corolla 1.8 Hybrid 2019-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (12th Gen) 2018-Present \/ Hatchback (E210) 2019-Present \/ Corolla 2.0 Hybrid 2019-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Prius (4th Gen) 2016-2019 \/ Hatchback (XW50) 2016-2019 \/ Prius Hybrid 1.8 (ZVW50) 2016-2019\u003c\/li\u003e\n\u003cli\u003eToyota \/ Prius (4th Gen) 2016-2019 \/ Hatchback (XW50) 2016-2019 \/ Prius Plug-in Hybrid 1.8 (ZVW50) 2017-2019\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on axle stands or a ramp. Remove the factory arm and bolt the Hardrace arm in its place; it comes complete with its bushes or joints fitted, so no press is needed. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes. Have a full four-wheel alignment done after fitting.\u003c\/p\u003e\n\u003ch3\u003eDoes it come with the bushes fitted?\u003c\/h3\u003e\n\u003cp\u003eYes. The arm comes complete with its bushes or joints already fitted, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eOnly slightly. The hardened rubber is firmer than the factory bushes but still absorbs vibration, so it stays comfortable for everyday driving.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780105040184,"sku":"HR-Q0681","price":341.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0681_main.jpg?v=1678899320"},{"product_id":"hardrace-front-roll-centre-adjusting-20mm-spacer-2pc-set-toyota-corolla-altis-01-13","title":"Hardrace Front Roll Centre Adjusting 20mm Spacer Toyota Corolla Altis 01-13","description":"\u003ch2\u003eHardrace Geometry Correction Spacers for Toyota Celica, Corolla and Prius and Lexus CT – Restores Roll Centre\u003c\/h2\u003e\n\u003cp\u003eLowering a car drops the lower arms below their ideal angle, which lowers the roll centre and adds body roll and bump steer. These Hardrace geometry correction spacers lower the ball joint by 20mm to bring the arm angle back, for sharper turn-in and less roll.\u003c\/p\u003e\n\u003cp\u003eIt suits the Toyota Celica, Corolla and Prius and Lexus CT.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRestores the roll centre on lowered cars\u003c\/li\u003e\n\u003cli\u003eSharper turn-in, less roll\u003c\/li\u003e\n\u003cli\u003e20mm height correction\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGeometry correction spacers (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eToyota \/ Celica (7th Gen) 1999-2006 \/ Coupe (T23) 1999-2006 \/ Celica 1.8 (ZZT230) (140HP\/103KW) 1999-2002\u003c\/li\u003e\n\u003cli\u003eToyota \/ Celica (7th Gen) 1999-2006 \/ Coupe (T23) 1999-2006 \/ Celica 1.8 (ZZT230) (140HP\/103KW) 2002-2006\u003c\/li\u003e\n\u003cli\u003eToyota \/ Celica (7th Gen) 1999-2006 \/ Coupe (T23) 1999-2006 \/ Celica 1.8 (ZZT231) (190HP\/140KW) 2000-2006\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Hatchback (E120) 2002-2007 \/ Corolla 1.4 (ZZE120) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Hatchback (E120) 2002-2007 \/ Corolla 1.4 TD (NDE120) 2004-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Hatchback (E120) 2002-2007 \/ Corolla 1.6 (ZZE121) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Hatchback (E120) 2002-2007 \/ Corolla 1.8 (ZZE123) (190HP\/140KW) 2002-2005\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Hatchback (E120) 2002-2007 \/ Corolla 1.8 Compressor (ZZE123) (215HP\/158KW) 2005-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Hatchback (E120) 2002-2007 \/ Corolla 2.0 TD (CDE120) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Sedan (E120) 2002-2007 \/ Corolla 1.4 (ZZE120) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Sedan (E120) 2002-2007 \/ Corolla 1.4 TD (NDE120) 2004-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Sedan (E120) 2002-2007 \/ Corolla 1.6 (ZZE121) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Sedan (E120) 2002-2007 \/ Corolla 2.0 TD (CDE120) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Wagon (E120) 2002-2007 \/ Corolla Wagon 1.4 (ZZE120) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Wagon (E120) 2002-2007 \/ Corolla Wagon 1.4 TD (NDE120) 2004-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Wagon (E120) 2002-2007 \/ Corolla Wagon 1.6 (ZZE121) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Wagon (E120) 2002-2007 \/ Corolla Wagon 2.0 TD (CDE120) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Prius (3rd Gen) 2009-2016 \/ Hatchback (XW30) 2009-2016 \/ Prius Hybrid 1.8 (ZVW30) 2009-2016\u003c\/li\u003e\n\u003cli\u003eToyota \/ Prius (3rd Gen) 2009-2016 \/ Hatchback (XW30) 2009-2016 \/ Prius Hybrid 1.8 (ZVW40) 2012-2016\u003c\/li\u003e\n\u003cli\u003eToyota \/ Prius (3rd Gen) 2009-2016 \/ Hatchback (XW30) 2009-2016 \/ Prius Plug-in Hybrid 1.8 (ZVW35) 2012-2016\u003c\/li\u003e\n\u003cli\u003eLexus \/ CT 2010-Present \/ Hatchback (A10) 2010-Present \/ CT200 Hybrid 1.8 2010-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Not for Corolla 10\u0026amp; 11th Hatchback (Auris).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely and remove the wheel. Separate the ball joint from the hub, fit the spacer between the ball joint and the hub using the supplied hardware, and tighten to the vehicle manufacturer's torque figures. Have a full alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-front-lower-ball-joint-oe-type-toyota-corolla-altis-01-07-wish-03-09-2pcs\"\u003eHardrace Front Lower Ball Joint OE Type Toyota Corolla Altis 01-07 Wish 03-09 2pcs\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes, have a full alignment done after fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780105072952,"sku":"HR-8787","price":79.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20174121359613j59n6to.jpg?v=1678899320"},{"product_id":"hardrace-hardened-rubber-front-lower-control-arm-bushes-2pc-set-toyota-corolla-altis-e140-e150","title":"Hardrace Front Lower Arm Bushes 2pc Rubber Toyota Corolla E140 E150 00-18","description":"\u003ch2\u003eHardrace Front Lower Arm Bushes Hardened Rubber for Toyota Corolla E120\/E150 (2002-2013) – Firmer Location, Sharper Handling\u003c\/h2\u003e\n\u003cp\u003eFactory suspension bushes are built for comfort, so they flex under cornering, braking and acceleration and let the suspension move around. These Hardrace front lower arm bushes are a firmer upgrade that fits into the factory parts, so the suspension is located more precisely and the car feels sharper and more consistent.\u003c\/p\u003e\n\u003cp\u003eThey are made from hardened rubber, a high-strength, anti-crack compound that is firmer than the factory bushes but still absorbs vibration.\u003c\/p\u003e\n\u003cp\u003eIt suits the Toyota Corolla E120\/E150 (2002-2013).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer than the factory bushes\u003c\/li\u003e\n\u003cli\u003eSharper, more consistent handling\u003c\/li\u003e\n\u003cli\u003eHardened rubber: firm but still absorbs vibration\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront lower arm bushes (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Hatchback (E120) 2002-2007 \/ Corolla 1.4 (ZZE120) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Hatchback (E120) 2002-2007 \/ Corolla 1.4 TD (NDE120) 2004-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Hatchback (E120) 2002-2007 \/ Corolla 1.6 (ZZE121) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Hatchback (E120) 2002-2007 \/ Corolla 1.8 (ZZE123) (190HP\/140KW) 2002-2005\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Hatchback (E120) 2002-2007 \/ Corolla 1.8 Compressor (ZZE123) (215HP\/158KW) 2005-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Hatchback (E120) 2002-2007 \/ Corolla 2.0 TD (CDE120) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Sedan (E120) 2002-2007 \/ Corolla 1.4 (ZZE120) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Sedan (E120) 2002-2007 \/ Corolla 1.4 TD (NDE120) 2004-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Sedan (E120) 2002-2007 \/ Corolla 1.6 (ZZE121) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Sedan (E120) 2002-2007 \/ Corolla 2.0 TD (CDE120) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Wagon (E120) 2002-2007 \/ Corolla Wagon 1.4 (ZZE120) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Wagon (E120) 2002-2007 \/ Corolla Wagon 1.4 TD (NDE120) 2004-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Wagon (E120) 2002-2007 \/ Corolla Wagon 1.6 (ZZE121) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Wagon (E120) 2002-2007 \/ Corolla Wagon 2.0 TD (CDE120) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (10th Gen) 2007-2013 \/ Sedan (E150) 2007-2013 \/ Corolla 1.3 2008-2013\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (10th Gen) 2007-2013 \/ Sedan (E150) 2007-2013 \/ Corolla 1.4 TD 2009-2013\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (10th Gen) 2007-2013 \/ Sedan (E150) 2007-2013 \/ Corolla 1.6 2007-2013\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (10th Gen) 2007-2013 \/ Sedan (E150) 2007-2013 \/ Corolla 2.0 TD 2007-2013\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Corolla 10\/11th: For E140\/E170 Sedan Only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe bushes press into the factory parts, so the part needs removing from the car and a hydraulic press is needed to press the old bushes out and the new Hardrace bushes in. Refit the part and tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need a press?\u003c\/h3\u003e\n\u003cp\u003eYes. The old bushes must be pressed out and the new ones pressed in with a hydraulic press.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes, have a full four-wheel alignment done after fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eOnly slightly. The hardened rubber is firmer than the factory bushes but still absorbs vibration, so it stays comfortable for everyday driving.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780105105720,"sku":"HR-7281-A","price":88.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201561710484710y48y47cr.jpg?v=1678899321"},{"product_id":"hardrace-hardened-rubber-front-lower-control-arm-bushes-4pc-set-toyota-corolla-altis-e140-e150","title":"Hardrace Front Lower Arm Bushes 4pc Rubber Toyota Corolla E140 06-13","description":"\u003ch2\u003eHardrace Front Lower Arm Bushes Hardened Rubber for Toyota Corolla E120\/E150 (2002-2013) – Firmer Location, Sharper Handling\u003c\/h2\u003e\n\u003cp\u003eFactory suspension bushes are built for comfort, so they flex under cornering, braking and acceleration and let the suspension move around. These Hardrace front lower arm bushes are a firmer upgrade that fits into the factory parts, so the suspension is located more precisely and the car feels sharper and more consistent.\u003c\/p\u003e\n\u003cp\u003eThey are made from hardened rubber, a high-strength, anti-crack compound that is firmer than the factory bushes but still absorbs vibration.\u003c\/p\u003e\n\u003cp\u003eIt suits the Toyota Corolla E120\/E150 (2002-2013).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer than the factory bushes\u003c\/li\u003e\n\u003cli\u003eSharper, more consistent handling\u003c\/li\u003e\n\u003cli\u003eHardened rubber: firm but still absorbs vibration\u003c\/li\u003e\n\u003cli\u003e4-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront lower arm bushes (4 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Hatchback (E120) 2002-2007 \/ Corolla 1.4 (ZZE120) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Hatchback (E120) 2002-2007 \/ Corolla 1.4 TD (NDE120) 2004-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Hatchback (E120) 2002-2007 \/ Corolla 1.6 (ZZE121) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Hatchback (E120) 2002-2007 \/ Corolla 1.8 (ZZE123) (190HP\/140KW) 2002-2005\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Hatchback (E120) 2002-2007 \/ Corolla 1.8 Compressor (ZZE123) (215HP\/158KW) 2005-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Hatchback (E120) 2002-2007 \/ Corolla 2.0 TD (CDE120) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Sedan (E120) 2002-2007 \/ Corolla 1.4 (ZZE120) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Sedan (E120) 2002-2007 \/ Corolla 1.4 TD (NDE120) 2004-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Sedan (E120) 2002-2007 \/ Corolla 1.6 (ZZE121) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Sedan (E120) 2002-2007 \/ Corolla 2.0 TD (CDE120) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Wagon (E120) 2002-2007 \/ Corolla Wagon 1.4 (ZZE120) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Wagon (E120) 2002-2007 \/ Corolla Wagon 1.4 TD (NDE120) 2004-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Wagon (E120) 2002-2007 \/ Corolla Wagon 1.6 (ZZE121) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Wagon (E120) 2002-2007 \/ Corolla Wagon 2.0 TD (CDE120) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (10th Gen) 2007-2013 \/ Sedan (E150) 2007-2013 \/ Corolla 1.3 2008-2013\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (10th Gen) 2007-2013 \/ Sedan (E150) 2007-2013 \/ Corolla 1.4 TD 2009-2013\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (10th Gen) 2007-2013 \/ Sedan (E150) 2007-2013 \/ Corolla 1.6 2007-2013\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (10th Gen) 2007-2013 \/ Sedan (E150) 2007-2013 \/ Corolla 2.0 TD 2007-2013\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Harden Rubber Equipped Corolla 10\/11th: For E140\/E170 Sedan Only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe bushes press into the factory parts, so the part needs removing from the car and a hydraulic press is needed to press the old bushes out and the new Hardrace bushes in. Refit the part and tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-rubber-rear-subframe-bushes-2pc-set-toyota-corolla-altis-e120\"\u003eHardrace Hardened Rubber Rear Subframe Bushes 2Pc Set Toyota Corolla Altis E120 01-08\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need a press?\u003c\/h3\u003e\n\u003cp\u003eYes. The old bushes must be pressed out and the new ones pressed in with a hydraulic press.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes, have a full four-wheel alignment done after fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eOnly slightly. The hardened rubber is firmer than the factory bushes but still absorbs vibration, so it stays comfortable for everyday driving.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780105138488,"sku":"HR-7281","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201561710424210g42q42ie.jpg?v=1678899323"},{"product_id":"hardrace-hardened-rubber-rear-subframe-bushes-2pc-set-toyota-corolla-altis-e120","title":"Hardrace Rubber Rear Subframe Bushes Toyota Corolla Altis E120 00-17","description":"\u003ch2\u003eHardrace Rear Frame Bushes Hardened Rubber for Toyota Corolla E120\/E150 (2002-2013) and Toyota Prius XW20 (2003-2009) – Firmer Mounting, Less Wheel Hop\u003c\/h2\u003e\n\u003cp\u003eSoft factory mount bushes let the subframe or differential move under load, which causes clunks, wheel hop and vague handling. These Hardrace rear frame bushes are a firmer upgrade that holds everything in place, for more direct power delivery and a tighter feel.\u003c\/p\u003e\n\u003cp\u003eThey are made from hardened rubber, a high-strength, anti-crack compound that is firmer than the factory bushes but still absorbs vibration.\u003c\/p\u003e\n\u003cp\u003eIt suits the Toyota Corolla E120\/E150 (2002-2013) and Toyota Prius XW20 (2003-2009).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHolds the subframe or differential firmly\u003c\/li\u003e\n\u003cli\u003eLess wheel hop and clunking\u003c\/li\u003e\n\u003cli\u003eHardened rubber: firm but still absorbs vibration\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear frame bushes (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Hatchback (E120) 2002-2007 \/ Corolla 1.4 (ZZE120) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Hatchback (E120) 2002-2007 \/ Corolla 1.4 TD (NDE120) 2004-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Hatchback (E120) 2002-2007 \/ Corolla 1.6 (ZZE121) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Hatchback (E120) 2002-2007 \/ Corolla 1.8 (ZZE123) (190HP\/140KW) 2002-2005\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Hatchback (E120) 2002-2007 \/ Corolla 1.8 Compressor (ZZE123) (215HP\/158KW) 2005-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Hatchback (E120) 2002-2007 \/ Corolla 2.0 TD (CDE120) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Sedan (E120) 2002-2007 \/ Corolla 1.4 (ZZE120) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Sedan (E120) 2002-2007 \/ Corolla 1.4 TD (NDE120) 2004-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Sedan (E120) 2002-2007 \/ Corolla 1.6 (ZZE121) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Sedan (E120) 2002-2007 \/ Corolla 2.0 TD (CDE120) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Wagon (E120) 2002-2007 \/ Corolla Wagon 1.4 (ZZE120) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Wagon (E120) 2002-2007 \/ Corolla Wagon 1.4 TD (NDE120) 2004-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Wagon (E120) 2002-2007 \/ Corolla Wagon 1.6 (ZZE121) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Wagon (E120) 2002-2007 \/ Corolla Wagon 2.0 TD (CDE120) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (10th Gen) 2007-2013 \/ Sedan (E150) 2007-2013 \/ Corolla 1.3 2008-2013\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (10th Gen) 2007-2013 \/ Sedan (E150) 2007-2013 \/ Corolla 1.4 TD 2009-2013\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (10th Gen) 2007-2013 \/ Sedan (E150) 2007-2013 \/ Corolla 1.6 2007-2013\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (10th Gen) 2007-2013 \/ Sedan (E150) 2007-2013 \/ Corolla 2.0 TD 2007-2013\u003c\/li\u003e\n\u003cli\u003eToyota \/ Prius (2nd Gen) 2003-2009 \/ Hatchback (XW20) 2003-2009 \/ Prius Hybrid 1.5 (NHW20) 2003-2004\u003c\/li\u003e\n\u003cli\u003eToyota \/ Prius (2nd Gen) 2003-2009 \/ Hatchback (XW20) 2003-2009 \/ Prius Hybrid 1.5 (NHW20) 2004-2009\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Corolla 10\/11th: For E140\/E170 Sedan Only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe bushes press into the factory parts, so the part needs removing from the car and a hydraulic press is needed to press the old bushes out and the new Hardrace bushes in. Refit the part and tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-rubber-front-lower-control-arm-bushes-4pc-set-toyota-corolla-altis-e140-e150\"\u003eHardrace Hardened Rubber Front Lower Control Arm Bushes 4Pc Set Toyota Corolla Altis E140 \u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need a press?\u003c\/h3\u003e\n\u003cp\u003eYes. The old bushes must be pressed out and the new ones pressed in with a hydraulic press.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNot usually, but have it checked if the car feels different afterwards.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eOnly slightly. The hardened rubber is firmer than the factory bushes but still absorbs vibration, so it stays comfortable for everyday driving.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780105204024,"sku":"HR-7253","price":155.22,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/2017516827338y27m33ae.jpg?v=1678899323"},{"product_id":"hardrace-25-4mm-rear-torsion-bar-1pc-toyota-corolla-01-07","title":"Hardrace 25.4mm Rear Torsion Bar Toyota Corolla 01-07","description":"\u003ch2\u003eHardrace Rear Torsion Bar for Toyota Corolla E120 (2002-2007) – Stiffer than the factory parts\u003c\/h2\u003e\n\u003cp\u003eThese Hardrace torsion bars are an upgrade over the factory parts, stiffer for less body roll and sharper response.\u003c\/p\u003e\n\u003cp\u003eIt suits the Toyota Corolla E120 (2002-2007).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStiffer than the factory parts\u003c\/li\u003e\n\u003cli\u003eLess body roll\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear torsion bar\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Hatchback (E120) 2002-2007 \/ Corolla 1.4 (ZZE120) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Hatchback (E120) 2002-2007 \/ Corolla 1.4 TD (NDE120) 2004-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Hatchback (E120) 2002-2007 \/ Corolla 1.6 (ZZE121) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Hatchback (E120) 2002-2007 \/ Corolla 1.8 (ZZE123) (190HP\/140KW) 2002-2005\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Hatchback (E120) 2002-2007 \/ Corolla 1.8 Compressor (ZZE123) (215HP\/158KW) 2005-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Hatchback (E120) 2002-2007 \/ Corolla 2.0 TD (CDE120) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Sedan (E120) 2002-2007 \/ Corolla 1.4 (ZZE120) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Sedan (E120) 2002-2007 \/ Corolla 1.4 TD (NDE120) 2004-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Sedan (E120) 2002-2007 \/ Corolla 1.6 (ZZE121) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Sedan (E120) 2002-2007 \/ Corolla 2.0 TD (CDE120) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Wagon (E120) 2002-2007 \/ Corolla Wagon 1.4 (ZZE120) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Wagon (E120) 2002-2007 \/ Corolla Wagon 1.4 TD (NDE120) 2004-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Wagon (E120) 2002-2007 \/ Corolla Wagon 1.6 (ZZE121) 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) 2002-2007 \/ Wagon (E120) 2002-2007 \/ Corolla Wagon 2.0 TD (CDE120) 2002-2007\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the vehicle safely. Remove the factory part where fitted and install the Hardrace part, tightening all fixings to the vehicle manufacturer's torque figures. Have the alignment checked after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780105269560,"sku":"HR-Q0010","price":106.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20181101002710r0i27kk.jpg?v=1678899324"},{"product_id":"hardrace-25-4mm-rear-torsion-bar-1pc-toyota-corolla-07","title":"Hardrace 25.4mm Rear Torsion Bar Toyota Corolla 07+","description":"\u003ch2\u003eHardrace Rear Torsion Bar for Toyota Corolla\/Altis\/Auris E140\/E150\/E170 (2006-2018), Toyota Wish ZGE20 (2009-2017) and Toyota Sienta NHP170 (2015-2025) – Stiffer than the factory parts\u003c\/h2\u003e\n\u003cp\u003eThese Hardrace torsion bars are an upgrade over the factory parts, stiffer for less body roll and sharper response.\u003c\/p\u003e\n\u003cp\u003eIt suits the Toyota Corolla\/Altis\/Auris E140\/E150\/E170 (2006-2018), Toyota Wish ZGE20 (2009-2017) and Toyota Sienta NHP170 (2015-2025).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStiffer than the factory parts\u003c\/li\u003e\n\u003cli\u003eLess body roll\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear torsion bar\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eToyota Corolla\/altis\/auris 10th E140\/E150 2006-2013\u003c\/li\u003e\n\u003cli\u003eToyota Corolla\/altis\/auris 11th E170\/E180  2013-2018\u003c\/li\u003e\n\u003cli\u003eToyota WISH 2nd ZGE20 2009-2017\u003c\/li\u003e\n\u003cli\u003eToyota Sienta 2nd NHP170 2015–2025\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Not for Corolla 10\u0026amp; 11th Hatchback (Auris).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the vehicle safely. Remove the factory part where fitted and install the Hardrace part, tightening all fixings to the vehicle manufacturer's torque figures. Have the alignment checked after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780105302328,"sku":"HR-Q0011","price":106.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201811011263711d26l37qe.jpg?v=1678899327"},{"product_id":"hardrace-28mm-front-anti-roll-bar-with-hardened-rubber-bushes-7pc-set-toyota-corolla-altis-e140-e170","title":"Hardrace 28mm Front Anti Roll Bar With Hardened Rubber Bushes Toyota 00-18","description":"\u003ch2\u003eHardrace 28mm Front Anti Roll Bar for Toyota Corolla\/Altis\/Auris E120\/E130\/E140 (2000-2018) – Flatter Cornering, Sharper Response\u003c\/h2\u003e\n\u003cp\u003eThe factory front anti-roll bar is built for comfort, so the car leans in corners and the steering feels slow to respond. This Hardrace 28mm front anti-roll bar is a stiffer upgrade that cuts body roll, so the car sits flatter, turns in more crisply and feels more composed through quick changes of direction.\u003c\/p\u003e\n\u003cp\u003eIt comes with mounting bushes.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e28mm front bar for reduced body roll\u003c\/li\u003e\n\u003cli\u003eSharper turn-in and flatter cornering\u003c\/li\u003e\n\u003cli\u003eMounting bushes included\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e7-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e28mm front anti-roll bar\u003c\/li\u003e\n\u003cli\u003eMounting bushes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e7 pieces in total.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eToyota Corolla\/altis\/auris 9th E120\/E130 2000-2007\u003c\/li\u003e\n\u003cli\u003eToyota Corolla\/altis\/auris 10th E140\/E150 2006-2013\u003c\/li\u003e\n\u003cli\u003eToyota Corolla\/altis\/auris 11th E170\/E180  2013-2018\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Not for Corolla 10\u0026amp;11th Hatchback (Auris); E120: Not for UK-produced models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on a ramp or axle stands. Undo the drop links and bush brackets and remove the factory bar. Fit the Hardrace bar with its bushes, refit the brackets and links, and tighten everything to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. No wheel alignment is needed for the bar alone. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-reinforced-front-drop-links-2pc-set-toyota-altis-e120-01-08\"\u003eHardrace Reinforced Front Drop Links 2Pc Set Toyota Altis E120 01-08\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment after fitting?\u003c\/h3\u003e\n\u003cp\u003eNo. An anti-roll bar does not change camber, toe or caster. You only need an alignment if you change the ride height at the same time.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eA stiffer bar is felt mainly in corners and over bumps that hit one side of the car. Over bumps that hit both wheels evenly, the ride is largely unchanged.\u003c\/p\u003e\n\u003ch3\u003eCan I use my standard drop links?\u003c\/h3\u003e\n\u003cp\u003eYes. On a lowered car, adjustable drop links let you set the bar level at rest, so it is not pre-loaded.\u003c\/p\u003e\n\u003ch3\u003eShould I upgrade the rear bar too?\u003c\/h3\u003e\n\u003cp\u003eUpgrading both ends cuts roll at both axles while keeping the balance closer to standard. Upgrading one end only shifts the balance: a stiffer front adds understeer, a stiffer rear adds oversteer.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780105335096,"sku":"HR-7980","price":248.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201610691749g17c4oq.jpg?v=1678899327"},{"product_id":"hardrace-rear-add-on-anti-roll-bar-3pc-set-toyota-corolla-altis-e170","title":"Hardrace Rear Add On Anti Roll Bar Toyota Corolla Altis E170 06+","description":"\u003ch2\u003eHardrace 17mm Rear Add-On Anti Roll Bar for Toyota Corolla E150\/E170 (2007-Present) – Flatter Cornering, Sharper Response\u003c\/h2\u003e\n\u003cp\u003eMany cars leave the factory with a soft rear end that lets the body lean and the front push wide in corners. This Hardrace 17mm add-on rear anti-roll bar adds extra roll stiffness at the rear, which reduces understeer and helps the car rotate into corners.\u003c\/p\u003e\n\u003cp\u003eIt comes with mounting bushes.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e17mm rear bar for reduced body roll\u003c\/li\u003e\n\u003cli\u003eReduces understeer and helps the car rotate\u003c\/li\u003e\n\u003cli\u003eAdds roll stiffness at the rear\u003c\/li\u003e\n\u003cli\u003eMounting bushes included\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e3-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e17mm rear add-on anti-roll bar\u003c\/li\u003e\n\u003cli\u003eMounting bushes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e3 pieces in total.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eToyota \/ Corolla (10th Gen) 2007-2013 \/ Sedan (E150) 2007-2013 \/ Corolla 1.3 2008-2013\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (10th Gen) 2007-2013 \/ Sedan (E150) 2007-2013 \/ Corolla 1.4 TD 2009-2013\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (10th Gen) 2007-2013 \/ Sedan (E150) 2007-2013 \/ Corolla 1.6 2007-2013\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (10th Gen) 2007-2013 \/ Sedan (E150) 2007-2013 \/ Corolla 2.0 TD 2007-2013\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (11th Gen) 2013-2018 \/ Sedan (E170) 2013-2018 \/ Corolla 1.3 (99HP\/73KW) 2013-2018\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (11th Gen) 2013-2018 \/ Sedan (E170) 2013-2018 \/ Corolla 1.4 TD (90HP\/66KW) 2013-2018\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (11th Gen) 2013-2018 \/ Sedan (E170) 2013-2018 \/ Corolla 1.6 (132HP\/97KW) 2013-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Not for Corolla 10\u0026amp;11th Hatchback (Auris).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on a ramp or axle stands. Fit the Hardrace add-on bar to the mounting points with the supplied fittings and tighten everything to the specified torque figures with the car on its wheels at normal ride height. No wheel alignment is needed for the bar alone. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment after fitting?\u003c\/h3\u003e\n\u003cp\u003eNo. An anti-roll bar does not change camber, toe or caster. You only need an alignment if you change the ride height at the same time.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eA stiffer bar is felt mainly in corners and over bumps that hit one side of the car. Over bumps that hit both wheels evenly, the ride is largely unchanged.\u003c\/p\u003e\n\u003ch3\u003eCan I use my standard drop links?\u003c\/h3\u003e\n\u003cp\u003eYes. On a lowered car, adjustable drop links let you set the bar level at rest, so it is not pre-loaded.\u003c\/p\u003e\n\u003ch3\u003eShould I upgrade the front bar too?\u003c\/h3\u003e\n\u003cp\u003eUpgrading both ends cuts roll at both axles while keeping the balance closer to standard. Upgrading one end only shifts the balance: a stiffer front adds understeer, a stiffer rear adds oversteer.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780105367864,"sku":"HR-7990","price":177.36,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201632313384313r38g43ro.jpg?v=1678899327"},{"product_id":"hardrace-toyota-altis-19-rear-sway-bar-25-4mm-5pcs-set","title":"Hardrace Rear Sway Bar 25.4mm Toyota Altis 19+","description":"\u003ch2\u003eHardrace 25.4mm Adjustable Rear Anti Roll Bar for Toyota Corolla E210 (2018-Present) – Flatter Cornering, Sharper Response\u003c\/h2\u003e\n\u003cp\u003eThe factory rear anti-roll bar is soft, so the car leans and pushes wide in corners. This Hardrace 25.4mm rear anti-roll bar is a stiffer upgrade that cuts rear body roll, which reduces understeer and helps the car rotate into corners.\u003c\/p\u003e\n\u003cp\u003eThe hollow design adds stiffness without adding much weight. It is heat treated for strength. It has 2-way adjustment, so you can fine-tune the roll stiffness to suit the road or track. It comes with mounting bushes.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e25.4mm rear bar for reduced body roll\u003c\/li\u003e\n\u003cli\u003eReduces understeer and helps the car rotate\u003c\/li\u003e\n\u003cli\u003e2-way adjustable roll stiffness\u003c\/li\u003e\n\u003cli\u003eHollow design for stiffness without excess weight\u003c\/li\u003e\n\u003cli\u003eHeat treated for strength\u003c\/li\u003e\n\u003cli\u003eMounting bushes included\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e5-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e25.4mm rear anti-roll bar\u003c\/li\u003e\n\u003cli\u003eMounting bushes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e5 pieces in total.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eToyota \/ Corolla (12th Gen) 2018-Present \/ Hatchback (E210) 2019-Present \/ Corolla 1.2T 2019-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (12th Gen) 2018-Present \/ Hatchback (E210) 2019-Present \/ Corolla 1.8 Hybrid 2019-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (12th Gen) 2018-Present \/ Hatchback (E210) 2019-Present \/ Corolla 2.0 Hybrid 2019-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on a ramp or axle stands. Undo the drop links and bush brackets and remove the factory bar. Fit the Hardrace bar with its bushes, refit the brackets and links, and tighten everything to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Set both ends to the same adjustment hole to start. No wheel alignment is needed for the bar alone. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment after fitting?\u003c\/h3\u003e\n\u003cp\u003eNo. An anti-roll bar does not change camber, toe or caster. You only need an alignment if you change the ride height at the same time.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eA stiffer bar is felt mainly in corners and over bumps that hit one side of the car. Over bumps that hit both wheels evenly, the ride is largely unchanged.\u003c\/p\u003e\n\u003ch3\u003eWhich setting should I start on?\u003c\/h3\u003e\n\u003cp\u003eStart on the softest setting with both ends set the same, then go firmer if you want less roll.\u003c\/p\u003e\n\u003ch3\u003eCan I use my standard drop links?\u003c\/h3\u003e\n\u003cp\u003eYes. On a lowered car, adjustable drop links let you set the bar level at rest, so it is not pre-loaded.\u003c\/p\u003e\n\u003ch3\u003eShould I upgrade the front bar too?\u003c\/h3\u003e\n\u003cp\u003eUpgrading both ends cuts roll at both axles while keeping the balance closer to standard. Upgrading one end only shifts the balance: a stiffer front adds understeer, a stiffer rear adds oversteer.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780105400632,"sku":"HR-Q0583","price":212.84,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0583_main.jpg?v=1678899328"},{"product_id":"hardrace-front-strut-brace-1-piece-set-toyota-auris-18-corolla-sport-18","title":"Hardrace Front Strut Brace Toyota Auris 18+ Corolla Sport 18+","description":"\u003ch2\u003eHardrace Front Strut Brace for Toyota Corolla E210 (2018-Present) – Sharper Steering, Stiffer Front End\u003c\/h2\u003e\n\u003cp\u003eUnder hard cornering the front strut towers flex, which blurs steering feel and lets the suspension geometry shift. This Hardrace front strut brace ties them together, so the front end stays stiff and the steering stays sharp and precise.\u003c\/p\u003e\n\u003cp\u003eIt bolts to existing mounting points with no cutting or drilling.\u003c\/p\u003e\n\u003cp\u003eIt suits the Toyota Corolla E210 (2018-Present).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTies the strut towers together\u003c\/li\u003e\n\u003cli\u003eReduces body flex under cornering\u003c\/li\u003e\n\u003cli\u003eSharper, more precise steering\u003c\/li\u003e\n\u003cli\u003eBolts to existing mounting points\u003c\/li\u003e\n\u003cli\u003eNo cutting or drilling required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront strut brace\u003c\/li\u003e\n\u003cli\u003eFitting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eToyota \/ Corolla (12th Gen) 2018-Present \/ Hatchback (E210) 2019-Present \/ Corolla 1.2T 2019-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (12th Gen) 2018-Present \/ Hatchback (E210) 2019-Present \/ Corolla 1.8 Hybrid 2019-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (12th Gen) 2018-Present \/ Hatchback (E210) 2019-Present \/ Corolla 2.0 Hybrid 2019-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eRemove the strut top nuts or mounting bolts, fit the brace over them and refit the nuts. Tighten to the vehicle manufacturer's torque figures with the car on its wheels, then check clearance around the bonnet and engine bay before driving. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. The brace does not change the suspension geometry.\u003c\/p\u003e\n\u003ch3\u003eWill it fit under the bonnet?\u003c\/h3\u003e\n\u003cp\u003eYes, it is designed to fit under the standard bonnet on the listed models. Check clearance around any aftermarket intake or engine parts.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eNo. A brace stiffens the chassis, not the suspension, so the ride comfort is largely unchanged.\u003c\/p\u003e\n\u003ch3\u003eCan I fit it with other braces?\u003c\/h3\u003e\n\u003cp\u003eYes. Combining front, middle and rear braces stiffens more of the chassis for an even tighter feel.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780105630008,"sku":"HR-Q0396","price":141.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hardrace-part-q0396.jpg?v=1678899331"},{"product_id":"hardrace-adjustable-rear-lateral-and-trailing-arm-with-hardened-rubber-bushes-6pc-set-toyota-corolla-e100","title":"Hardrace Rear Lateral \u0026 Trailing Arms Rubber Toyota Corolla E100 E110 91-02","description":"\u003ch2\u003eHardrace Rear Lateral \u0026amp; Trailing Arms for Toyota Corolla E100\/E110 (1992-2002) – Firmer Location, More Stable\u003c\/h2\u003e\n\u003cp\u003eThe rear links set the rear wheel alignment, and soft factory bushes let it change under load. These Hardrace rear lateral \u0026amp; trailing arms are an upgrade that holds the rear wheels firmly, for more stable, predictable handling.\u003c\/p\u003e\n\u003cp\u003eThey use hardened rubber bushes, firmer than standard but still able to absorb vibration.\u003c\/p\u003e\n\u003cp\u003eIt suits the Toyota Corolla E100\/E110 (1992-2002).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHolds the rear alignment firmly\u003c\/li\u003e\n\u003cli\u003eMore stable, predictable handling\u003c\/li\u003e\n\u003cli\u003eHardened rubber bushes\u003c\/li\u003e\n\u003cli\u003e6-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear lateral \u0026amp; trailing arms (6 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eToyota \/ Corolla (7th Gen) \/ Coupe (E100) \/ 1992-1997\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (7th Gen) \/ Hatchback (E100) \/ 1992-1997\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (7th Gen) \/ Sedan (E100) \/ 1992-1997\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (7th Gen) \/ Wagon (E100) \/ 1992-1997\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (8th Gen) \/ Coupe (E110) \/ 1997-2002\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (8th Gen) \/ Hatchback (E110) \/ 1997-2002\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (8th Gen) \/ Sedan (E110) \/ 1997-2002\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (8th Gen) \/ Wagon (E110) \/ 1997-2002\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the vehicle safely on axle stands or a ramp. Remove the factory part and fit the Hardrace part in its place. Tighten all fixings to the vehicle manufacturer's torque figures with the vehicle on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes, have a full alignment done after fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eOnly slightly. The hardened rubber is firmer than standard but still absorbs vibration, so it stays comfortable for everyday driving.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780112412984,"sku":"HR-6304","price":319.26,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201510610291810c29n18gq.jpg?v=1678899365"},{"product_id":"hardrace-adjustable-rear-lateral-long-arms-with-spherical-bearings-2pc-set-toyota-corolla-ae86","title":"Hardrace Adjustable Rear Lateral Long Arms Spherical Toyota 83-87","description":"\u003ch2\u003eHardrace Adjustable Rear Lateral Link Long Pillow Ball for Toyota Corolla E80 (1983-1987) – Adjustable Geometry, Sharper Handling\u003c\/h2\u003e\n\u003cp\u003eThe lateral arms control the rear wheels side to side, and soft factory bushes let them deflect under cornering loads. These Hardrace rear lateral link longs are an upgrade over the factory parts. Each one locates the suspension far more firmly, so the car feels sharper and more consistent through corners and over bumps.\u003c\/p\u003e\n\u003cp\u003eThey use pillow ball (spherical) joints, which give precise, direct feedback with no rubber deflection. The length is adjustable, so you can fine-tune the geometry.\u003c\/p\u003e\n\u003cp\u003eIt suits the Toyota Corolla (5th Gen) 1983-1987.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer suspension location than the factory arms\u003c\/li\u003e\n\u003cli\u003eSharper, more consistent handling\u003c\/li\u003e\n\u003cli\u003eAdjustable length to fine-tune the geometry\u003c\/li\u003e\n\u003cli\u003ePillow ball joints for zero deflection\u003c\/li\u003e\n\u003cli\u003eHigh-strength steel construction\u003c\/li\u003e\n\u003cli\u003eSupplied complete with bushes or joints fitted, so no press is needed\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear lateral link long (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eToyota \/ Corolla (5th Gen) 1983-1987 \/ Coupe (E80) 1983-1987 \/ Corolla GT 1.6 (AE86) 1983-1987\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on axle stands or a ramp. Remove the factory arm and bolt the Hardrace arm in its place; it comes complete with its bushes or joints fitted, so no press is needed. Set adjustable arms to the same length as the factory parts to start. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-rear-lateral-rods-with-spherical-bearings-1pc-set-toyota-corolla-ae86-83-87\"\u003eHardrace Adjustable Rear Lateral Rods With Spherical Bearings 1Pc Set Toyota Corolla AE86 \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-tension-rods-with-spherical-bearings-2pc-set-toyota-corolla-ae86-83-87\"\u003eHardrace Adjustable Tension Rods With Spherical Bearings 2Pc Set Toyota Corolla AE86 83-87\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-rear-lateral-short-arms-with-spherical-bearings-2pc-set-toyota-corolla-ae86\"\u003eHardrace Adjustable Rear Lateral Short Arms With Spherical Bearings 2Pc Set Toyota Corolla\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes. Have a full four-wheel alignment done after fitting, and use it to set the adjustable arms to the settings you want.\u003c\/p\u003e\n\u003ch3\u003eDoes it come with the bushes fitted?\u003c\/h3\u003e\n\u003cp\u003eYes. The arm comes complete with its bushes or joints already fitted, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003ePillow ball joints pass on a little more noise and vibration than rubber bushes, but there is no rubber flex, so the handling is far more precise.\u003c\/p\u003e\n\u003ch3\u003eHow is it adjusted?\u003c\/h3\u003e\n\u003cp\u003eThe arm length is set with the adjuster and locked with lock nuts. Set it to the factory length first, then fine-tune it during the alignment.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780112675128,"sku":"HR-7344-L","price":279.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/2015111015515515a51x55xd.jpg?v=1678899368"},{"product_id":"hardrace-adjustable-rear-lateral-short-arms-with-spherical-bearings-2pc-set-toyota-corolla-ae86","title":"Hardrace Adjustable Rear Lateral Short Arms Spherical Toyota 83-87","description":"\u003ch2\u003eHardrace Adjustable Rear Lateral Link Short for Toyota Corolla E80 (1983-1987) – Adjustable Geometry, Sharper Handling\u003c\/h2\u003e\n\u003cp\u003eThe lateral arms control the rear wheels side to side, and soft factory bushes let them deflect under cornering loads. These Hardrace rear lateral link shorts are an upgrade over the factory parts. Each one locates the suspension far more firmly, so the car feels sharper and more consistent through corners and over bumps.\u003c\/p\u003e\n\u003cp\u003eThey use pillow ball (spherical) joints, which give precise, direct feedback with no rubber deflection. The length is adjustable, so you can fine-tune the geometry.\u003c\/p\u003e\n\u003cp\u003eIt suits the Toyota Corolla (5th Gen) 1983-1987.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer suspension location than the factory arms\u003c\/li\u003e\n\u003cli\u003eSharper, more consistent handling\u003c\/li\u003e\n\u003cli\u003eAdjustable length to fine-tune the geometry\u003c\/li\u003e\n\u003cli\u003ePillow ball joints for zero deflection\u003c\/li\u003e\n\u003cli\u003eHigh-strength steel construction\u003c\/li\u003e\n\u003cli\u003eSupplied complete with bushes or joints fitted, so no press is needed\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear lateral link short (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eToyota \/ Corolla (5th Gen) 1983-1987 \/ Coupe (E80) 1983-1987 \/ Corolla GT 1.6 (AE86) 1983-1987\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on axle stands or a ramp. Remove the factory arm and bolt the Hardrace arm in its place; it comes complete with its bushes or joints fitted, so no press is needed. Set adjustable arms to the same length as the factory parts to start. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-rear-lateral-rods-with-spherical-bearings-1pc-set-toyota-corolla-ae86-83-87\"\u003eHardrace Adjustable Rear Lateral Rods With Spherical Bearings 1Pc Set Toyota Corolla AE86 \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-tension-rods-with-spherical-bearings-2pc-set-toyota-corolla-ae86-83-87\"\u003eHardrace Adjustable Tension Rods With Spherical Bearings 2Pc Set Toyota Corolla AE86 83-87\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-rear-lateral-long-arms-with-spherical-bearings-2pc-set-toyota-corolla-ae86\"\u003eHardrace Adjustable Rear Lateral Long Arms With Spherical Bearings 2Pc Set Toyota Corolla \u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes. Have a full four-wheel alignment done after fitting, and use it to set the adjustable arms to the settings you want.\u003c\/p\u003e\n\u003ch3\u003eDoes it come with the bushes fitted?\u003c\/h3\u003e\n\u003cp\u003eYes. The arm comes complete with its bushes or joints already fitted, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003ePillow ball joints pass on a little more noise and vibration than rubber bushes, but there is no rubber flex, so the handling is far more precise.\u003c\/p\u003e\n\u003ch3\u003eHow is it adjusted?\u003c\/h3\u003e\n\u003cp\u003eThe arm length is set with the adjuster and locked with lock nuts. Set it to the factory length first, then fine-tune it during the alignment.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780112707896,"sku":"HR-7344-S","price":279.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/2015111015362715k36p27en.jpg?v=1678899368"},{"product_id":"hardrace-adjustable-rear-lower-lateral-and-trailing-arm-with-spherical-bearings-6pc-set-toyota-corolla-93-00","title":"Hardrace Rear Lateral \u0026 Trailing Arms Spherical Toyota Corolla E100 91-02","description":"\u003ch2\u003eHardrace Rear Lower Lateral Arms + Trailing Arms for Toyota Corolla E100\/E110 (1992-2002) – Adjustable Geometry, Sharper Handling\u003c\/h2\u003e\n\u003cp\u003eThe trailing arms locate the rear wheels front to back, and soft factory bushes let them move under power and braking. These Hardrace rear lower lateral arm + trailing arms are an upgrade over the factory parts. Each one locates the suspension far more firmly, so the car feels sharper and more consistent through corners and over bumps.\u003c\/p\u003e\n\u003cp\u003eThey use pillow ball (spherical) joints, which give precise, direct feedback with no rubber deflection. The length is adjustable, so you can fine-tune the geometry.\u003c\/p\u003e\n\u003cp\u003eIt suits the Toyota Corolla (7th Gen) 1992-1997 and Toyota Corolla (8th Gen) 1997-2002.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer suspension location than the factory arms\u003c\/li\u003e\n\u003cli\u003eSharper, more consistent handling\u003c\/li\u003e\n\u003cli\u003eAdjustable length to fine-tune the geometry\u003c\/li\u003e\n\u003cli\u003ePillow ball joints for zero deflection\u003c\/li\u003e\n\u003cli\u003eHigh-strength steel construction\u003c\/li\u003e\n\u003cli\u003eSupplied complete with bushes or joints fitted, so no press is needed\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e6-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear lower lateral arm + trailing arms (6 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eToyota \/ Corolla (7th Gen) \/ Coupe (E100) \/ 1992-1997\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (7th Gen) \/ Hatchback (E100) \/ 1992-1997\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (7th Gen) \/ Sedan (E100) \/ 1992-1997\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (7th Gen) \/ Wagon (E100) \/ 1992-1997\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (8th Gen) \/ Coupe (E110) \/ 1997-2002\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (8th Gen) \/ Hatchback (E110) \/ 1997-2002\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (8th Gen) \/ Sedan (E110) \/ 1997-2002\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (8th Gen) \/ Wagon (E110) \/ 1997-2002\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on axle stands or a ramp. Remove the factory arm and bolt the Hardrace arm in its place; it comes complete with its bushes or joints fitted, so no press is needed. Set adjustable arms to the same length as the factory parts to start. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes. Have a full four-wheel alignment done after fitting, and use it to set the adjustable arms to the settings you want.\u003c\/p\u003e\n\u003ch3\u003eDoes it come with the bushes fitted?\u003c\/h3\u003e\n\u003cp\u003eYes. The arm comes complete with its bushes or joints already fitted, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003ePillow ball joints pass on a little more noise and vibration than rubber bushes, but there is no rubber flex, so the handling is far more precise.\u003c\/p\u003e\n\u003ch3\u003eHow is it adjusted?\u003c\/h3\u003e\n\u003cp\u003eThe arm length is set with the adjuster and locked with lock nuts. Set it to the factory length first, then fine-tune it during the alignment.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780113002808,"sku":"HR-6818","price":718.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20151061044910k44d9ys.jpg?v=1678899371"},{"product_id":"hardrace-toyota-ae86-rear-lateral-link-long-hardened-rubber-2pcs-set","title":"Hardrace Toyota AE86 Rear Lateral Link Long Hardened Rubber 2Pcs","description":"\u003ch2\u003eHardrace Toyota AE86 Rear Lateral Link Long Hardened Rubber – Firmer Suspension Location\u003c\/h2\u003e\n\u003cp\u003eFactory suspension parts are built for comfort and flex under cornering, braking and acceleration. This Hardrace suspension part is a stronger upgrade that locates the suspension more firmly, for sharper, more consistent handling.\u003c\/p\u003e\n\u003cp\u003eIt uses hardened rubber, firmer than standard but still able to absorb vibration.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer suspension location\u003c\/li\u003e\n\u003cli\u003eSharper, more consistent handling\u003c\/li\u003e\n\u003cli\u003eHardened rubber\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eSuits the Toyota AE86, as listed in the title. Check your model, engine and market spec with us before ordering if you are unsure.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely. Remove the factory part and fit the Hardrace part in its place, tightening all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height. Have the alignment checked after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780113068344,"sku":"HR-6592-L","price":159.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hardrace-placeholder_3f19ebc9-589a-4a05-a88d-e6c72502c37c.jpg?v=1678899371"},{"product_id":"hardrace-toyota-ae86-rear-lateral-link-short-hardened-rubber-2pcs-set","title":"Hardrace Toyota AE86 Rear Lateral Link Short Hardened Rubber 2Pcs","description":"\u003ch2\u003eHardrace Toyota AE86 Rear Lateral Link Short Hardened Rubber – Firmer Suspension Location\u003c\/h2\u003e\n\u003cp\u003eFactory suspension parts are built for comfort and flex under cornering, braking and acceleration. This Hardrace suspension part is a stronger upgrade that locates the suspension more firmly, for sharper, more consistent handling.\u003c\/p\u003e\n\u003cp\u003eIt uses hardened rubber, firmer than standard but still able to absorb vibration.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer suspension location\u003c\/li\u003e\n\u003cli\u003eSharper, more consistent handling\u003c\/li\u003e\n\u003cli\u003eHardened rubber\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eSuits the Toyota AE86, as listed in the title. Check your model, engine and market spec with us before ordering if you are unsure.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely. Remove the factory part and fit the Hardrace part in its place, tightening all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height. Have the alignment checked after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780113101112,"sku":"HR-6592-S","price":159.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hardrace-placeholder_4540ab32-228a-4543-88bb-188293f206c4.jpg?v=1678899372"},{"product_id":"hardrace-toyota-corolla-altis-auris-18-corolla-cross-20-c-hr-17-prius-15-camry-17-gr-yaris-20-lexus-ux-18-es-18-rear-trailing-arm-bushing-kit-hardened-rubber-2pcs-set","title":"Hardrace Rear Trailing Arm Bushing Kit Hardened Rubber Toyota GR Yaris 20+","description":"\u003ch2\u003eHardrace Rear Trailing Arm Bushes for Lexus ES and UX and Toyota C-HR, Camry, Prius and Yaris – Firmer Location, Sharper Handling\u003c\/h2\u003e\n\u003cp\u003eFactory suspension bushes are built for comfort, so they flex under cornering, braking and acceleration and let the suspension move around. These Hardrace rear trailing arm bushes are a firmer upgrade that fits into the factory parts, so the suspension is located more precisely and the car feels sharper and more consistent.\u003c\/p\u003e\n\u003cp\u003eThey are made from hardened rubber, a high-strength, anti-crack compound that is firmer than the factory bushes but still absorbs vibration.\u003c\/p\u003e\n\u003cp\u003eIt suits the Lexus ES and UX and Toyota C-HR, Camry, Prius and Yaris.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer than the factory bushes\u003c\/li\u003e\n\u003cli\u003eSharper, more consistent handling\u003c\/li\u003e\n\u003cli\u003eHardened rubber: firm but still absorbs vibration\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear trailing arm bushes (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLexus \/ ES (7th Gen) 2018-Present \/ Sedan (XV70) 2018-Present \/ ES300h Hybrid 2.5 (XV70) 2018-Present\u003c\/li\u003e\n\u003cli\u003eLexus \/ ES (7th Gen) 2018-Present \/ Sedan (XV70) 2018-Present \/ ES350 3.5 (XV70) 2018-Present\u003c\/li\u003e\n\u003cli\u003eLexus \/ UX 2018-Present \/ SUV (ZA10) 2018-Present \/ UX200 (MZAA10) 2018-Present\u003c\/li\u003e\n\u003cli\u003eLexus \/ UX 2018-Present \/ SUV (ZA10) 2018-Present \/ UX250 (MZAH10) 2018-Present\u003c\/li\u003e\n\u003cli\u003eLexus \/ UX 2018-Present \/ SUV (ZA10) 2018-Present \/ UX300e 2018-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ C-HR (1st Gen) 2016-2023 \/ SUV 2016-Present \/ C-HR 1.2T 2016- Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ C-HR (1st Gen) 2016-2023 \/ SUV 2016-Present \/ C-HR 1.8 Hybrid 2016- Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ C-HR (1st Gen) 2016-2023 \/ SUV 2016-Present \/ C-HR 2.0 Hybrid 2016- Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Camry (9th Gen) 2017-2024 \/ Sedan (XV70) 2017-2024 \/ Camry 2.5 Hybrid (176HP\/129KW) 2017-2024\u003c\/li\u003e\n\u003cli\u003eToyota \/ Camry (9th Gen) 2017-2024 \/ Sedan (XV70) 2017-2024 \/ Camry 2.5 Hybrid (178HP\/131KW) 2017-2024\u003c\/li\u003e\n\u003cli\u003eToyota \/ Camry (9th Gen) 2017-2024 \/ Sedan (XV70) 2017-2024 \/ Camry 2.5 Hybrid (211HP\/155KW) 2017-2024\u003c\/li\u003e\n\u003cli\u003eToyota \/ Prius (4th Gen) 2016-2019 \/ Hatchback (XW50) 2016-2019 \/ Prius Hybrid 1.8 (ZVW50) 2016-2019\u003c\/li\u003e\n\u003cli\u003eToyota \/ Prius (4th Gen) 2016-2019 \/ Hatchback (XW50) 2016-2019 \/ Prius Plug-in Hybrid 1.8 (ZVW50) 2017-2019\u003c\/li\u003e\n\u003cli\u003eToyota \/ Yaris (4th Gen) 2020-Present \/ Hatchback (XP210) 2020-2024 \/ Yaris 1.6T GR 2020-2024\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (12th Gen) 2018-Present \/ Hatchback (E210) 2019-Present \/ Corolla 1.6 Turbo GR (GZEA14) 2023-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Prius (5th Gen) 2023-Present \/ Hatchback (XW60) 2023-Present \/ 2.0 Plug in Hybrid 2023-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Prius (5th Gen) 2023-Present \/ Hatchback (XW60) 2023-Present \/ 2.0 Plug in Hybrid Solar 2023-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Yaris (4th Gen) 2020-Present \/ Hachtback facelift (XP210) 2024-Present \/ Yaris 1.6T GR 2024-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Harden Rubber Equipped\" Corolla Cross '20-: For AWD Use Only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe bushes press into the factory parts, so the part needs removing from the car and a hydraulic press is needed to press the old bushes out and the new Hardrace bushes in. Refit the part and tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-front-lower-arm-front-bushing-toyota-gr-yaris-20\"\u003eHardrace Front Lower Arm Front Bushing Toyota GR Yaris 20+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-rear-lower-arm-bushing-toyota-gr-yaris-20\"\u003eHardrace Rear Lower Arm Bushing Toyota GR Yaris 20+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-shifter-cable-bushing-toyota-gr-yaris-20\"\u003eHardrace Shifter Cable Bushing Toyota GR Yaris 20+\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need a press?\u003c\/h3\u003e\n\u003cp\u003eYes. The old bushes must be pressed out and the new ones pressed in with a hydraulic press.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes, have a full four-wheel alignment done after fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eOnly slightly. The hardened rubber is firmer than the factory bushes but still absorbs vibration, so it stays comfortable for everyday driving.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780113133880,"sku":"HR-Q1128","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hardrace-placeholder_1018083f-6fb1-485d-abe7-455aac4078bb.jpg?v=1678899374"},{"product_id":"hardrace-toyota-corolla-07-18-front-lower-arm-hardened-rubber-2pcs-set","title":"Hardrace Front Lower Arm Hardened Rubber Toyota Corolla 07-18","description":"\u003ch2\u003eHardrace Front Lower Arms for Toyota Corolla, Prius, Avensis and Prius+ and Lexus CT – Firmer Location, Sharper Handling\u003c\/h2\u003e\n\u003cp\u003eFactory control arms are built for comfort, with soft rubber bushes that let the wheel move around under cornering, braking and acceleration. These Hardrace front lower arms are an upgrade over the factory parts. Each one locates the suspension far more firmly, so the car feels sharper and more consistent through corners and over bumps.\u003c\/p\u003e\n\u003cp\u003eThey use hardened rubber bushes, a high-strength, anti-crack compound that is firmer than the factory bushes but still absorbs vibration.\u003c\/p\u003e\n\u003cp\u003eIt suits a range of Toyota and Lexus models listed below.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer suspension location than the factory arms\u003c\/li\u003e\n\u003cli\u003eSharper, more consistent handling\u003c\/li\u003e\n\u003cli\u003eHardened rubber bushes for firm, quiet control\u003c\/li\u003e\n\u003cli\u003eHigh-strength steel construction\u003c\/li\u003e\n\u003cli\u003eSupplied complete with bushes or joints fitted, so no press is needed\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront lower arms (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eToyota \/ Corolla (10th Gen) 2007-2013 \/ Sedan (E150) 2007-2013 \/ Corolla 1.3 2008-2013\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (10th Gen) 2007-2013 \/ Sedan (E150) 2007-2013 \/ Corolla 1.4 TD 2009-2013\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (10th Gen) 2007-2013 \/ Sedan (E150) 2007-2013 \/ Corolla 1.6 2007-2013\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (10th Gen) 2007-2013 \/ Sedan (E150) 2007-2013 \/ Corolla 2.0 TD 2007-2013\u003c\/li\u003e\n\u003cli\u003eToyota \/ Prius (3rd Gen) 2009-2016 \/ Hatchback (XW30) 2009-2016 \/ Prius Hybrid 1.8 (ZVW30) 2009-2016\u003c\/li\u003e\n\u003cli\u003eToyota \/ Prius (3rd Gen) 2009-2016 \/ Hatchback (XW30) 2009-2016 \/ Prius Hybrid 1.8 (ZVW40) 2012-2016\u003c\/li\u003e\n\u003cli\u003eToyota \/ Prius (3rd Gen) 2009-2016 \/ Hatchback (XW30) 2009-2016 \/ Prius Plug-in Hybrid 1.8 (ZVW35) 2012-2016\u003c\/li\u003e\n\u003cli\u003eLexus \/ CT 2010-Present \/ Hatchback (A10) 2010-Present \/ CT200 Hybrid 1.8 2010-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Avensis (3rd Gen) 2009-Present \/ Sedan (T27) 2009-Present \/ Avensis 1.6 (ZRT270) 2009-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Avensis (3rd Gen) 2009-Present \/ Sedan (T27) 2009-Present \/ Avensis 1.6 TD (WWT270) 2015-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Avensis (3rd Gen) 2009-Present \/ Sedan (T27) 2009-Present \/ Avensis 1.8 (ZRT271) 2009-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Avensis (3rd Gen) 2009-Present \/ Sedan (T27) 2009-Present \/ Avensis 2.0 (ZRT272) 2009-2013\u003c\/li\u003e\n\u003cli\u003eToyota \/ Avensis (3rd Gen) 2009-Present \/ Sedan (T27) 2009-Present \/ Avensis 2.0 TD (ADT270) 2009-2015\u003c\/li\u003e\n\u003cli\u003eToyota \/ Avensis (3rd Gen) 2009-Present \/ Sedan (T27) 2009-Present \/ Avensis 2.2 TD (ADT271) 2009-2012\u003c\/li\u003e\n\u003cli\u003eToyota \/ Avensis (3rd Gen) 2009-Present \/ Wagon (T27) 2009-Present \/ Avensis Touring Sports 1.6 (ZRT270) 2015-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Avensis (3rd Gen) 2009-Present \/ Wagon (T27) 2009-Present \/ Avensis Touring Sports 1.6 TD (WWT270) 2015-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Avensis (3rd Gen) 2009-Present \/ Wagon (T27) 2009-Present \/ Avensis Touring Sports 1.8 (ZRT271) 2015-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Avensis (3rd Gen) 2009-Present \/ Wagon (T27) 2009-Present \/ Avensis Touring Sports 2.0 (ZRT272) 2015-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Avensis (3rd Gen) 2009-Present \/ Wagon (T27) 2009-Present \/ Avensis Touring Sports 2.0 TD (ADT270) 2015-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Avensis (3rd Gen) 2009-Present \/ Wagon (T27) 2009-Present \/ Avensis Wagon 1.6 (ZRT270) 2009-2015\u003c\/li\u003e\n\u003cli\u003eToyota \/ Avensis (3rd Gen) 2009-Present \/ Wagon (T27) 2009-Present \/ Avensis Wagon 1.8 (ZRT271) 2009-2015\u003c\/li\u003e\n\u003cli\u003eToyota \/ Avensis (3rd Gen) 2009-Present \/ Wagon (T27) 2009-Present \/ Avensis Wagon 2.0 (ZRT272) 2009-2015\u003c\/li\u003e\n\u003cli\u003eToyota \/ Avensis (3rd Gen) 2009-Present \/ Wagon (T27) 2009-Present \/ Avensis Wagon 2.0 TD (ADT270) 2009-2015\u003c\/li\u003e\n\u003cli\u003eToyota \/ Avensis (3rd Gen) 2009-Present \/ Wagon (T27) 2009-Present \/ Avensis Wagon 2.2 TD (ADT271) 2009-2015\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (11th Gen) 2013-2018 \/ Sedan (E170) 2013-2018 \/ Corolla 1.3 (99HP\/73KW) 2013-2018\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (11th Gen) 2013-2018 \/ Sedan (E170) 2013-2018 \/ Corolla 1.4 TD (90HP\/66KW) 2013-2018\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (11th Gen) 2013-2018 \/ Sedan (E170) 2013-2018 \/ Corolla 1.6 (132HP\/97KW) 2013-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Prius+ (1st Gen) 2011-Present \/ MPV (XV40) 2011-Present \/ Prius Hybrid 1.8 (ZVW40) 2011-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e For Corolla Hatchback (Auris) Use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on axle stands or a ramp. Remove the factory arm and bolt the Hardrace arm in its place; it comes complete with its bushes or joints fitted, so no press is needed. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes. Have a full four-wheel alignment done after fitting.\u003c\/p\u003e\n\u003ch3\u003eDoes it come with the bushes fitted?\u003c\/h3\u003e\n\u003cp\u003eYes. The arm comes complete with its bushes or joints already fitted, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eOnly slightly. The hardened rubber is firmer than the factory bushes but still absorbs vibration, so it stays comfortable for everyday driving.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. For Corolla Hatchback (Auris) Use.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780113199416,"sku":"HR-Q0589","price":341.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0589_main.jpg?v=1678899375"},{"product_id":"hardrace-toyota-corolla-altis-18-brake-master-cylinder-stopper-1pcs-set-not-for-hybrid-models-use","title":"Hardrace Brake Master Cylinder Stopper Not For Hybrid Models Toyota 18+","description":"\u003ch2\u003eHardrace Brake Master Cylinder Stopper for Toyota Corolla E210 (2018-Present) (LHD) – Firmer, More Consistent Pedal\u003c\/h2\u003e\n\u003cp\u003eUnder hard braking the brake master cylinder can flex the bulkhead it is mounted to, which makes the pedal feel soft and long. This Hardrace brake master cylinder stopper braces the master cylinder against the bulkhead, so the pedal feels firmer and more consistent and you can modulate the brakes more precisely.\u003c\/p\u003e\n\u003cp\u003eThis version is for LHD cars.\u003c\/p\u003e\n\u003cp\u003eIt suits the Toyota Corolla E210 (2018-Present).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer, more consistent brake pedal\u003c\/li\u003e\n\u003cli\u003eStops the master cylinder flexing the bulkhead\u003c\/li\u003e\n\u003cli\u003eMore precise brake modulation\u003c\/li\u003e\n\u003cli\u003eBolt-on fitting\u003c\/li\u003e\n\u003cli\u003eLHD version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrake master cylinder stopper\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eToyota \/ Corolla (12th Gen) 2018-Present \/ Hatchback (E210) 2019-Present \/ Corolla 1.2T 2019-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e For Left-hand Drive Cars Only; Not For Hybrid Models use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eOpen the bonnet and fit the stopper so it braces the brake master cylinder against the bulkhead, following the Hardrace instructions. Make sure it doesn't press on any pipes or wiring, and check the brake pedal feel before driving. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-toyota-corolla-altis-18-corolla-cross-20-front-lower-rear-brace-1pcs-set\"\u003eHardrace Front Lower Rear Brace 1Pcs Toyota Corolla 18+ Altis 18+ Corolla Cross 20+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-toyota-corolla-altis-18-rear-subframe-brace-1pcs-set\"\u003eHardrace Rear Subframe Brace 1Pcs Toyota Corolla 18+ Altis 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-toyota-corolla-altis-18-corolla-cross-20-front-strut-brace-1pcs-set\"\u003eHardrace Front Strut Brace 1Pcs Toyota Corolla 18+ Altis 18+ Corolla Cross 20+\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIs it the right one for my car?\u003c\/h3\u003e\n\u003cp\u003eCheck LHD or RHD first: master cylinder stoppers are made for one drive side only. The note in the Fitment section says which this one is.\u003c\/p\u003e\n\u003ch3\u003eDoes it change the brakes themselves?\u003c\/h3\u003e\n\u003cp\u003eNo. It only stops the master cylinder moving, so the pedal feels firmer. It works with standard or uprated brakes.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780113232184,"sku":"HR-Q1111","price":79.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hardrace-placeholder_b96d3a85-0433-46ab-acc6-db796e6b6b46.jpg?v=1678899375"},{"product_id":"hardrace-hardened-engine-mounts-3pc-set-toyota-corolla-ae86","title":"Hardrace Hardened Engine Mounts Toyota Corolla AE86 83-87","description":"\u003ch2\u003eHardrace Hardened Engine Mount for Toyota Corolla E80 (1983-1987) – Less Engine Movement, Sharper Response\u003c\/h2\u003e\n\u003cp\u003eSoft factory mounts let the engine and gearbox rock under acceleration, braking and gear changes, which blunts throttle response, makes shifts vague and can cause wheel hop. This Hardrace hardened engine mount is a firmer upgrade that holds the drivetrain in place, so power goes down more cleanly and the car feels tighter and more responsive.\u003c\/p\u003e\n\u003cp\u003eIt uses hardened rubber, a high-strength, anti-crack compound that is firmer than the factory rubber but still absorbs some vibration.\u003c\/p\u003e\n\u003cp\u003eIt suits the Toyota Corolla E80 (1983-1987).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer than the factory mount\u003c\/li\u003e\n\u003cli\u003eLess engine and gearbox movement\u003c\/li\u003e\n\u003cli\u003eSharper throttle response and more precise gear changes\u003c\/li\u003e\n\u003cli\u003eHelps reduce wheel hop\u003c\/li\u003e\n\u003cli\u003eHardened rubber: firm but still absorbs vibration\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e3-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHardened engine mount (3 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eToyota \/ Corolla (5th Gen) 1983-1987 \/ Coupe (E80) 1983-1987 \/ Corolla GT 1.6 (AE86) 1983-1987\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the engine and gearbox with a jack or engine support bar before undoing any mount, and work on one mount at a time so the drivetrain stays aligned. Remove the factory mount and bolt the Hardrace mount in its place. Tighten all fixings to the vehicle manufacturer's torque figures. Expect a little more vibration than standard. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-transmission-mount-toyota-corolla-ae86-83-87\"\u003eHardrace Hardened Transmission Mount Toyota Corolla AE86 83-87\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-front-engine-mount-toyota-corolla-ae86-83-87\"\u003eHardrace Hardened Front Engine Mount Toyota Corolla AE86 83-87\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill it increase vibration?\u003c\/h3\u003e\n\u003cp\u003eYes, a little. Firmer mounts pass more engine vibration into the cabin, especially at idle.\u003c\/p\u003e\n\u003ch3\u003eShould I upgrade all the mounts at once?\u003c\/h3\u003e\n\u003cp\u003eUpgrading the matching mounts together gives the most consistent result, but each mount can be fitted on its own.\u003c\/p\u003e\n\u003ch3\u003eDoes it come ready to fit?\u003c\/h3\u003e\n\u003cp\u003eYes. It is a complete mount, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780113363256,"sku":"HR-7011","price":266.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/2015411630216r30j2bh.jpg?v=1678899378"},{"product_id":"hardrace-hardened-front-engine-mount-toyota-corolla-ae86-83-87","title":"Hardrace Hardened Front Engine Mount Toyota Corolla AE86 83-87","description":"\u003ch2\u003eHardrace Hardened Front Side Engine Mount for Toyota Corolla E80 (1983-1987) – Less Engine Movement, Sharper Response\u003c\/h2\u003e\n\u003cp\u003eSoft factory mounts let the engine and gearbox rock under acceleration, braking and gear changes, which blunts throttle response, makes shifts vague and can cause wheel hop. This Hardrace hardened front side engine mount is a firmer upgrade that holds the drivetrain in place, so power goes down more cleanly and the car feels tighter and more responsive.\u003c\/p\u003e\n\u003cp\u003eIt uses hardened rubber, a high-strength, anti-crack compound that is firmer than the factory rubber but still absorbs some vibration.\u003c\/p\u003e\n\u003cp\u003eIt suits the Toyota Corolla E80 (1983-1987).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer than the factory mount\u003c\/li\u003e\n\u003cli\u003eLess engine and gearbox movement\u003c\/li\u003e\n\u003cli\u003eSharper throttle response and more precise gear changes\u003c\/li\u003e\n\u003cli\u003eHelps reduce wheel hop\u003c\/li\u003e\n\u003cli\u003eHardened rubber: firm but still absorbs vibration\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHardened front side engine mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eToyota \/ Corolla (5th Gen) 1983-1987 \/ Coupe (E80) 1983-1987 \/ Corolla GT 1.6 (AE86) 1983-1987\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the engine and gearbox with a jack or engine support bar before undoing any mount, and work on one mount at a time so the drivetrain stays aligned. Remove the factory mount and bolt the Hardrace mount in its place. Tighten all fixings to the vehicle manufacturer's torque figures. Expect a little more vibration than standard. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-transmission-mount-toyota-corolla-ae86-83-87\"\u003eHardrace Hardened Transmission Mount Toyota Corolla AE86 83-87\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-engine-mounts-3pc-set-toyota-corolla-ae86\"\u003eHardrace Hardened Engine Mounts 3Pc Set Toyota Corolla AE86 83-87\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill it increase vibration?\u003c\/h3\u003e\n\u003cp\u003eYes, a little. Firmer mounts pass more engine vibration into the cabin, especially at idle.\u003c\/p\u003e\n\u003ch3\u003eShould I upgrade all the mounts at once?\u003c\/h3\u003e\n\u003cp\u003eUpgrading the matching mounts together gives the most consistent result, but each mount can be fitted on its own.\u003c\/p\u003e\n\u003ch3\u003eDoes it come ready to fit?\u003c\/h3\u003e\n\u003cp\u003eYes. It is a complete mount, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780113396024,"sku":"HR-Q0344","price":155.22,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/2018821924589s24h58dh.jpg?v=1678899378"},{"product_id":"hardrace-hardened-transmission-mount-toyota-corolla-ae86-83-87","title":"Hardrace Hardened Transmission Mount Toyota Corolla AE86 83-87","description":"\u003ch2\u003eHardrace Hardened Transmission Mount MT for Toyota Corolla E80 (1983-1987) – Less Engine Movement, Sharper Response\u003c\/h2\u003e\n\u003cp\u003eSoft factory mounts let the engine and gearbox rock under acceleration, braking and gear changes, which blunts throttle response, makes shifts vague and can cause wheel hop. This Hardrace hardened transmission mount is a firmer upgrade that holds the drivetrain in place, so power goes down more cleanly and the car feels tighter and more responsive.\u003c\/p\u003e\n\u003cp\u003eIt uses hardened rubber, a high-strength, anti-crack compound that is firmer than the factory rubber but still absorbs some vibration.\u003c\/p\u003e\n\u003cp\u003eIt suits the Toyota Corolla E80 (1983-1987).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer than the factory mount\u003c\/li\u003e\n\u003cli\u003eLess engine and gearbox movement\u003c\/li\u003e\n\u003cli\u003eSharper throttle response and more precise gear changes\u003c\/li\u003e\n\u003cli\u003eHelps reduce wheel hop\u003c\/li\u003e\n\u003cli\u003eHardened rubber: firm but still absorbs vibration\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHardened transmission mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eToyota \/ Corolla (5th Gen) 1983-1987 \/ Coupe (E80) 1983-1987 \/ Corolla GT 1.6 (AE86) 1983-1987\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e 1 PC\/SET MT use only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the engine and gearbox with a jack or engine support bar before undoing any mount, and work on one mount at a time so the drivetrain stays aligned. Remove the factory mount and bolt the Hardrace mount in its place. Tighten all fixings to the vehicle manufacturer's torque figures. Expect a little more vibration than standard. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-front-engine-mount-toyota-corolla-ae86-83-87\"\u003eHardrace Hardened Front Engine Mount Toyota Corolla AE86 83-87\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-engine-mounts-3pc-set-toyota-corolla-ae86\"\u003eHardrace Hardened Engine Mounts 3Pc Set Toyota Corolla AE86 83-87\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill it increase vibration?\u003c\/h3\u003e\n\u003cp\u003eYes, a little. Firmer mounts pass more engine vibration into the cabin, especially at idle.\u003c\/p\u003e\n\u003ch3\u003eShould I upgrade all the mounts at once?\u003c\/h3\u003e\n\u003cp\u003eUpgrading the matching mounts together gives the most consistent result, but each mount can be fitted on its own.\u003c\/p\u003e\n\u003ch3\u003eDoes it suit manual or automatic cars?\u003c\/h3\u003e\n\u003cp\u003eHardrace lists it for manual models. Check the note in the Fitment section against your engine and gearbox before ordering.\u003c\/p\u003e\n\u003ch3\u003eDoes it come ready to fit?\u003c\/h3\u003e\n\u003cp\u003eYes. It is a complete mount, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780113461560,"sku":"HR-Q0343","price":110.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201882192109c21l0va.jpg?v=1678899379"},{"product_id":"hardrace-hardened-rubber-complete-bushing-kit-14pc-set-toyota-corolla-93-00","title":"Hardrace Hardened Rubber Complete Bushing Kit Toyota Corolla 93-00","description":"\u003ch2\u003eHardrace Complete Bushes Kit Hardened Rubber for Toyota Corolla E100 (1992-1997) – Firmer Location, Sharper Handling\u003c\/h2\u003e\n\u003cp\u003eAfter years on the road the factory suspension bushes are soft and tired, which leaves the handling vague and imprecise. This Hardrace complete bushes kit upgrades them in one go with firmer Hardrace bushes, so the car feels tight, sharp and consistent again.\u003c\/p\u003e\n\u003cp\u003eThey are made from hardened rubber, a high-strength, anti-crack compound that is firmer than the factory bushes but still absorbs vibration.\u003c\/p\u003e\n\u003cp\u003eIt suits the Toyota Corolla E100 (1992-1997).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer than the factory bushes\u003c\/li\u003e\n\u003cli\u003eSharper, more consistent handling\u003c\/li\u003e\n\u003cli\u003eHardened rubber: firm but still absorbs vibration\u003c\/li\u003e\n\u003cli\u003e14-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComplete bushes kit (14 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eToyota \/ Corolla (7th Gen) 1992-1997 \/ Coupe (E100) 1992-1997 \/ Corolla Levin 1.6 (AE101) 1992-1997\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (7th Gen) 1992-1997 \/ Coupe (E100) 1992-1997 \/ Corolla Levin 1.6 Supercharged (AE101) 1992-1997\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (7th Gen) 1992-1997 \/ Hatchback (E100) 1992-1997 \/ Corolla 1.3 (EE101) 1992-1997\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (7th Gen) 1992-1997 \/ Hatchback (E100) 1992-1997 \/ Corolla 1.6 (AE101) 1992-1997\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (7th Gen) 1992-1997 \/ Hatchback (E100) 1992-1997 \/ Corolla 1.8 (AE102) 1992-1997\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (7th Gen) 1992-1997 \/ Hatchback (E100) 1992-1997 \/ Corolla 2.0 D (CE100) 1992-1997\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (7th Gen) 1992-1997 \/ Sedan (E100) 1992-1997 \/ Corolla 1.3 (EE101) 1992-1997\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (7th Gen) 1992-1997 \/ Sedan (E100) 1992-1997 \/ Corolla 1.6 (AE101) 1992-1997\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (7th Gen) 1992-1997 \/ Sedan (E100) 1992-1997 \/ Corolla 2.0 D (CE100) 1992-1997\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (7th Gen) 1992-1997 \/ Wagon (E100) 1992-1997 \/ Corolla Wagon 1.3 (EE101) 1992-1997\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (7th Gen) 1992-1997 \/ Wagon (E100) 1992-1997 \/ Corolla Wagon 1.6 (AE101) 1992-1997\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (7th Gen) 1992-1997 \/ Wagon (E100) 1992-1997 \/ Corolla Wagon 1.8 (AE102) 1992-1997\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (7th Gen) 1992-1997 \/ Wagon (E100) 1992-1997 \/ Corolla Wagon 2.0 D (CE100) 1992-1997\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe bushes press into the factory parts, so the part needs removing from the car and a hydraulic press is needed to press the old bushes out and the new Hardrace bushes in. Refit the part and tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-hardened-rubber-front-lower-arm-bushes-4pc-set-toyota-corolla-ae100-91-98\"\u003eHardrace Hardened Rubber Front Lower Arm Bushes 4Pc Set Toyota Corolla AE100 91-98\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need a press?\u003c\/h3\u003e\n\u003cp\u003eYes. The old bushes must be pressed out and the new ones pressed in with a hydraulic press.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes, have a full four-wheel alignment done after fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eOnly slightly. The hardened rubber is firmer than the factory bushes but still absorbs vibration, so it stays comfortable for everyday driving.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780113494328,"sku":"HR-7268","price":310.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20161281275812n7k58ik.jpg?v=1678899380"},{"product_id":"hardrace-hardened-rubber-front-lower-arm-bushes-2pc-set-toyota-corolla-ae86","title":"Hardrace Hardened Rubber Front Lower Arm Bushes Toyota Corolla AE86 83-87","description":"\u003ch2\u003eHardrace Front Lower Arm Bushes Hardened Rubber for Toyota Corolla E80 (1983-1987) – Firmer Location, Sharper Handling\u003c\/h2\u003e\n\u003cp\u003eFactory suspension bushes are built for comfort, so they flex under cornering, braking and acceleration and let the suspension move around. These Hardrace front lower arm bushes are a firmer upgrade that fits into the factory parts, so the suspension is located more precisely and the car feels sharper and more consistent.\u003c\/p\u003e\n\u003cp\u003eThey are made from hardened rubber, a high-strength, anti-crack compound that is firmer than the factory bushes but still absorbs vibration.\u003c\/p\u003e\n\u003cp\u003eIt suits the Toyota Corolla E80 (1983-1987).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer than the factory bushes\u003c\/li\u003e\n\u003cli\u003eSharper, more consistent handling\u003c\/li\u003e\n\u003cli\u003eHardened rubber: firm but still absorbs vibration\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront lower arm bushes (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eToyota \/ Corolla (5th Gen) 1983-1987 \/ Coupe (E80) 1983-1987 \/ Corolla GT 1.6 (AE86) 1983-1987\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe bushes press into the factory parts, so the part needs removing from the car and a hydraulic press is needed to press the old bushes out and the new Hardrace bushes in. Refit the part and tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need a press?\u003c\/h3\u003e\n\u003cp\u003eYes. The old bushes must be pressed out and the new ones pressed in with a hydraulic press.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes, have a full four-wheel alignment done after fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eOnly slightly. The hardened rubber is firmer than the factory bushes but still absorbs vibration, so it stays comfortable for everyday driving.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780114182456,"sku":"HR-8524","price":66.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20151119956479q56a47mq.jpg?v=1678899381"},{"product_id":"hardrace-super-tie-rod-ends-2pc-set-toyota-corolla-ae86-with-power-steering","title":"Hardrace Super Tie Rod Ends Toyota Corolla AE86 With Power Steering 83-87","description":"\u003ch2\u003eHardrace Super Tie Rod Ends for Toyota Corolla E80 (1983-1987) – Precise, Play-Free Steering\u003c\/h2\u003e\n\u003cp\u003eThe tie rod ends link the steering to the hubs, so play here shows up as vague, wandering steering. These Hardrace super tie rod ends are an upgrade built to the factory pattern, with stronger construction for precise, play-free steering.\u003c\/p\u003e\n\u003cp\u003eIt suits the Toyota Corolla E80 (1983-1987).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStronger than the factory tie rod ends\u003c\/li\u003e\n\u003cli\u003ePrecise, play-free steering\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuper tie rod ends (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eToyota \/ Corolla (5th Gen) 1983-1987 \/ Coupe (E80) 1983-1987 \/ Corolla GT 1.6 (AE86) 1983-1987\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Power Steering Only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely and remove the wheel. Note the position of the factory part, then undo the lock nut, separate the tie rod end from the hub with a proper splitter and unscrew it. Fit the Hardrace part, tighten all fixings to the vehicle manufacturer's torque figures, and have the front tracking set straight away. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-rc-tie-rod-ends-2pc-set-toyota-corolla-ae86-non-power-steering-83-87\"\u003eHardrace RC Tie Rod Ends 2Pc Set Toyota Corolla AE86 Non Power Steering 83-87\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes, have the front tracking set straight after fitting.\u003c\/p\u003e\n\u003ch3\u003eDo they fit the factory tie rods?\u003c\/h3\u003e\n\u003cp\u003eYes, unless a note in the Fitment section says otherwise. They are built to the factory pattern.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780114608440,"sku":"HR-6606","price":199.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201641411573311l57v33of.jpg?v=1678899386"},{"product_id":"hardrace-impreza-97-rear-reinforced-stabilizer-link-2pcs-set","title":"Hardrace Rear Reinforced Stabiliser Link Subaru Impreza 97-00","description":"\u003ch2\u003eHardrace Rear Drop Links for Toyota Corolla E100\/E110 (1992-2002) – Quicker Anti-Roll Bar Response\u003c\/h2\u003e\n\u003cp\u003eDrop links connect the anti-roll bar to the suspension, so any play in them delays the bar's response and causes knocks over bumps. These Hardrace rear drop links are a stronger upgrade over the factory links, with sturdier construction that keeps the anti-roll bar working instantly and precisely, for flatter, more controlled cornering.\u003c\/p\u003e\n\u003cp\u003eIt suits the Toyota Corolla E100\/E110 (1992-2002).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStronger than the factory drop links\u003c\/li\u003e\n\u003cli\u003eQuicker, more precise anti-roll bar response\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eToyota \/ Corolla (7th Gen) \/ Coupe (E100) \/ 1992-1997\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (7th Gen) \/ Hatchback (E100) \/ 1992-1997\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (7th Gen) \/ Sedan (E100) \/ 1992-1997\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (7th Gen) \/ Wagon (E100) \/ 1992-1997\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (8th Gen) \/ Coupe (E110) \/ 1997-2002\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (8th Gen) \/ Hatchback (E110) \/ 1997-2002\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (8th Gen) \/ Sedan (E110) \/ 1997-2002\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (8th Gen) \/ Wagon (E110) \/ 1997-2002\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e 15mm shorter than standard, for lowered cars.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on a ramp or axle stands. Undo the drop link nuts, holding the ball joint studs with an Allen key or spanner so they don't spin, and swap the factory links for the Hardrace ones. Tighten to the vehicle manufacturer's torque figures with the car on its wheels, so the anti-roll bar isn't pre-loaded. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eAre they adjustable?\u003c\/h3\u003e\n\u003cp\u003eNo, they are a fixed-length upgrade. If your car is heavily lowered, adjustable Hardrace drop links let you correct the link angle.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780114641208,"sku":"HR-6398","price":69.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/6398_main.jpg?v=1679390159"},{"product_id":"hardrace-reinforced-rear-drop-links-2pc-set-toyota-corolla-ae86","title":"Hardrace Reinforced Rear Drop Links Toyota Corolla AE86 83-87","description":"\u003ch2\u003eHardrace Rear Reinforced Drop Links for Toyota Corolla E80 (1983-1987) – Quicker Anti-Roll Bar Response\u003c\/h2\u003e\n\u003cp\u003eDrop links connect the anti-roll bar to the suspension, so any play in them delays the bar's response and causes knocks over bumps. These Hardrace rear reinforced drop links are a stronger upgrade over the factory links, with sturdier construction that keeps the anti-roll bar working instantly and precisely, for flatter, more controlled cornering.\u003c\/p\u003e\n\u003cp\u003eIt suits the Toyota Corolla E80 (1983-1987).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStronger than the factory drop links\u003c\/li\u003e\n\u003cli\u003eQuicker, more precise anti-roll bar response\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear reinforced drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eToyota \/ Corolla (5th Gen) 1983-1987 \/ Coupe (E80) 1983-1987 \/ Corolla GT 1.6 (AE86) 1983-1987\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on a ramp or axle stands. Undo the drop link nuts, holding the ball joint studs with an Allen key or spanner so they don't spin, and swap the factory links for the Hardrace ones. Tighten to the vehicle manufacturer's torque figures with the car on its wheels, so the anti-roll bar isn't pre-loaded. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-reinforced-front-drop-links-2pc-set-toyota-corolla-ae86-83-87\"\u003eHardrace Reinforced Front Drop Links 2Pc Set Toyota Corolla AE86 83-87\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eAre they adjustable?\u003c\/h3\u003e\n\u003cp\u003eNo, they are a fixed-length upgrade. If your car is heavily lowered, adjustable Hardrace drop links let you correct the link angle.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780114739512,"sku":"HR-6994","price":86.55,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201512116225816i22x58xa.jpg?v=1678899389"},{"product_id":"hardrace-toyota-corolla-cross-20-middle-lower-brace-1pcs-set","title":"Hardrace Middle Lower Brace Toyota Corolla Cross 20+","description":"\u003ch2\u003eHardrace Middle Lower Brace for Toyota Corolla Cross XG10 (2020-Present) – Stiffer Chassis, Sharper Handling\u003c\/h2\u003e\n\u003cp\u003eThe floor and lower chassis flex under hard cornering, which lets the suspension geometry move and makes the car feel less precise. This Hardrace middle lower brace ties key mounting points under the car together, so the chassis stays stiff and the car feels sharper and more consistent.\u003c\/p\u003e\n\u003cp\u003eIt bolts to existing mounting points with no cutting or drilling.\u003c\/p\u003e\n\u003cp\u003eIt suits the Toyota Corolla Cross XG10 (2020-Present).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStiffens the lower chassis\u003c\/li\u003e\n\u003cli\u003eReduces body flex under load\u003c\/li\u003e\n\u003cli\u003eSharper, more consistent handling\u003c\/li\u003e\n\u003cli\u003eBolts to existing mounting points\u003c\/li\u003e\n\u003cli\u003eNo cutting or drilling required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMiddle lower brace\u003c\/li\u003e\n\u003cli\u003eFitting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eToyota Corolla cross XG10 2020-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on a ramp or axle stands. Bolt the brace to the existing mounting points under the car and tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No cutting, drilling or alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-toyota-corolla-cross-20-brake-master-cylinder-stopper-1pcs-set\"\u003eHardrace Brake Master Cylinder Stopper 1Pcs Toyota Corolla Cross 20+\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. The brace does not change the suspension geometry.\u003c\/p\u003e\n\u003ch3\u003eWill it reduce ground clearance?\u003c\/h3\u003e\n\u003cp\u003eIt sits close to the floor or subframe, so it only reduces ground clearance slightly.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eNo. A brace stiffens the chassis, not the suspension, so the ride comfort is largely unchanged.\u003c\/p\u003e\n\u003ch3\u003eCan I fit it with other braces?\u003c\/h3\u003e\n\u003cp\u003eYes. Combining front, middle and rear braces stiffens more of the chassis for an even tighter feel.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780114837816,"sku":"HR-Q0808","price":70.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0808_main.jpg?v=1678899390"},{"product_id":"hardrace-toyota-corolla-cross-20-rear-add-on-sway-bar-15mm-3pcs-set","title":"Hardrace Rear Add-On Sway Bar 15mm Toyota Corolla Cross 20+","description":"\u003ch2\u003eHardrace 15mm Rear Add-On Anti Roll Bar for Toyota Corolla E210 (2018-Present) – Flatter Cornering, Sharper Response\u003c\/h2\u003e\n\u003cp\u003eMany cars leave the factory with a soft rear end that lets the body lean and the front push wide in corners. This Hardrace 15mm add-on rear anti-roll bar adds extra roll stiffness at the rear, which reduces understeer and helps the car rotate into corners.\u003c\/p\u003e\n\u003cp\u003eIt comes with mounting bushes.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e15mm rear bar for reduced body roll\u003c\/li\u003e\n\u003cli\u003eReduces understeer and helps the car rotate\u003c\/li\u003e\n\u003cli\u003eAdds roll stiffness at the rear\u003c\/li\u003e\n\u003cli\u003eMounting bushes included\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e3-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e15mm rear add-on anti-roll bar\u003c\/li\u003e\n\u003cli\u003eMounting bushes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e3 pieces in total.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eToyota \/ Corolla (12th Gen) 2018-Present \/ Hatchback (E210) 2019-Present \/ Corolla 1.2T 2019-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (12th Gen) 2018-Present \/ Hatchback (E210) 2019-Present \/ Corolla 1.8 Hybrid 2019-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (12th Gen) 2018-Present \/ Hatchback (E210) 2019-Present \/ Corolla 2.0 Hybrid 2019-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e For torsion beam rear axle models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on a ramp or axle stands. Fit the Hardrace add-on bar to the mounting points with the supplied fittings and tighten everything to the specified torque figures with the car on its wheels at normal ride height. No wheel alignment is needed for the bar alone. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-toyota-corolla-cross-20-front-sway-bar-28mm-5pcs-set\"\u003eHardrace Front Sway Bar 28mm 5Pcs Toyota Corolla Cross 20+\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment after fitting?\u003c\/h3\u003e\n\u003cp\u003eNo. An anti-roll bar does not change camber, toe or caster. You only need an alignment if you change the ride height at the same time.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eA stiffer bar is felt mainly in corners and over bumps that hit one side of the car. Over bumps that hit both wheels evenly, the ride is largely unchanged.\u003c\/p\u003e\n\u003ch3\u003eCan I use my standard drop links?\u003c\/h3\u003e\n\u003cp\u003eYes. On a lowered car, adjustable drop links let you set the bar level at rest, so it is not pre-loaded.\u003c\/p\u003e\n\u003ch3\u003eShould I upgrade the front bar too?\u003c\/h3\u003e\n\u003cp\u003eUpgrading both ends cuts roll at both axles while keeping the balance closer to standard. Upgrading one end only shifts the balance: a stiffer front adds understeer, a stiffer rear adds oversteer.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780114870584,"sku":"HR-Q0807","price":177.36,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0807_main.jpg?v=1678899391"},{"product_id":"hardrace-toyota-corolla-cross-20-brake-master-cylinder-stopper-1pcs-set","title":"Hardrace Brake Master Cylinder Stopper Toyota Corolla Cross 20+","description":"\u003ch2\u003eHardrace Brake Master Cylinder Stopper for Toyota Corolla Cross XG10 (2020-Present) (LHD) – Firmer, More Consistent Pedal\u003c\/h2\u003e\n\u003cp\u003eUnder hard braking the brake master cylinder can flex the bulkhead it is mounted to, which makes the pedal feel soft and long. This Hardrace brake master cylinder stopper braces the master cylinder against the bulkhead, so the pedal feels firmer and more consistent and you can modulate the brakes more precisely.\u003c\/p\u003e\n\u003cp\u003eThis version is for LHD cars.\u003c\/p\u003e\n\u003cp\u003eIt suits the Toyota Corolla Cross XG10 (2020-Present).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer, more consistent brake pedal\u003c\/li\u003e\n\u003cli\u003eStops the master cylinder flexing the bulkhead\u003c\/li\u003e\n\u003cli\u003eMore precise brake modulation\u003c\/li\u003e\n\u003cli\u003eBolt-on fitting\u003c\/li\u003e\n\u003cli\u003eLHD version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrake master cylinder stopper\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eToyota Corolla cross XG10 2020-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e For LHD use; Not For Hybrid use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eOpen the bonnet and fit the stopper so it braces the brake master cylinder against the bulkhead, following the Hardrace instructions. Make sure it doesn't press on any pipes or wiring, and check the brake pedal feel before driving. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-toyota-corolla-cross-20-middle-lower-brace-1pcs-set\"\u003eHardrace Middle Lower Brace 1Pcs Toyota Corolla Cross 20+\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIs it the right one for my car?\u003c\/h3\u003e\n\u003cp\u003eCheck LHD or RHD first: master cylinder stoppers are made for one drive side only. The note in the Fitment section says which this one is.\u003c\/p\u003e\n\u003ch3\u003eDoes it change the brakes themselves?\u003c\/h3\u003e\n\u003cp\u003eNo. It only stops the master cylinder moving, so the pedal feels firmer. It works with standard or uprated brakes.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780114903352,"sku":"HR-Q0813","price":79.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0813_main.jpg?v=1678899392"},{"product_id":"hardrace-toyota-corolla-cross-20-front-sway-bar-28mm-5pcs-set","title":"Hardrace Front Sway Bar 28mm Toyota Corolla Cross 20+","description":"\u003ch2\u003eHardrace 28mm Adjustable Front Anti Roll Bar for Toyota Corolla Cross XG10 (2020-Present) – Flatter Cornering, Sharper Response\u003c\/h2\u003e\n\u003cp\u003eThe factory front anti-roll bar is built for comfort, so the car leans in corners and the steering feels slow to respond. This Hardrace 28mm front anti-roll bar is a stiffer upgrade that cuts body roll, so the car sits flatter, turns in more crisply and feels more composed through quick changes of direction.\u003c\/p\u003e\n\u003cp\u003eThe hollow design adds stiffness without adding much weight. It is heat treated for strength. It has 2-way adjustment, so you can fine-tune the roll stiffness to suit the road or track. It comes with mounting bushes.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e28mm front bar for reduced body roll\u003c\/li\u003e\n\u003cli\u003eSharper turn-in and flatter cornering\u003c\/li\u003e\n\u003cli\u003e2-way adjustable roll stiffness\u003c\/li\u003e\n\u003cli\u003eHollow design for stiffness without excess weight\u003c\/li\u003e\n\u003cli\u003eHeat treated for strength\u003c\/li\u003e\n\u003cli\u003eMounting bushes included\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e5-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e28mm front anti-roll bar\u003c\/li\u003e\n\u003cli\u003eMounting bushes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e5 pieces in total.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eToyota Corolla cross XG10 2020-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on a ramp or axle stands. Undo the drop links and bush brackets and remove the factory bar. Fit the Hardrace bar with its bushes, refit the brackets and links, and tighten everything to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Set both ends to the same adjustment hole to start. No wheel alignment is needed for the bar alone. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-toyota-corolla-cross-20-rear-add-on-sway-bar-15mm-3pcs-set\"\u003eHardrace Rear Add-On Sway Bar 15mm 3Pcs Toyota Corolla Cross 20+\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment after fitting?\u003c\/h3\u003e\n\u003cp\u003eNo. An anti-roll bar does not change camber, toe or caster. You only need an alignment if you change the ride height at the same time.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eA stiffer bar is felt mainly in corners and over bumps that hit one side of the car. Over bumps that hit both wheels evenly, the ride is largely unchanged.\u003c\/p\u003e\n\u003ch3\u003eWhich setting should I start on?\u003c\/h3\u003e\n\u003cp\u003eStart on the softest setting with both ends set the same, then go firmer if you want less roll.\u003c\/p\u003e\n\u003ch3\u003eCan I use my standard drop links?\u003c\/h3\u003e\n\u003cp\u003eYes. On a lowered car, adjustable drop links let you set the bar level at rest, so it is not pre-loaded.\u003c\/p\u003e\n\u003ch3\u003eShould I upgrade the rear bar too?\u003c\/h3\u003e\n\u003cp\u003eUpgrading both ends cuts roll at both axles while keeping the balance closer to standard. Upgrading one end only shifts the balance: a stiffer front adds understeer, a stiffer rear adds oversteer.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780115001656,"sku":"HR-Q0825","price":230.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0825_main.jpg?v=1678899393"},{"product_id":"hardrace-adjustable-rear-anti-roll-bar-arb-25-4mm-3pc-set-toyota-gr-yaris-20","title":"Hardrace 25.4mm Rear Anti Roll Bar Toyota GR Yaris GR Corolla 20+","description":"\u003ch2\u003eHardrace 25.4mm Rear Anti Roll Bar for Toyota Yaris XP210 (2020-Present) and Toyota Corolla E210 (2018-Present) – Flatter Cornering, Sharper Response\u003c\/h2\u003e\n\u003cp\u003eThe factory rear anti-roll bar is soft, so the car leans and pushes wide in corners. This Hardrace 25.4mm rear anti-roll bar is a stiffer upgrade that cuts rear body roll, which reduces understeer and helps the car rotate into corners.\u003c\/p\u003e\n\u003cp\u003eIt comes with mounting bushes.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e25.4mm rear bar for reduced body roll\u003c\/li\u003e\n\u003cli\u003eReduces understeer and helps the car rotate\u003c\/li\u003e\n\u003cli\u003eMounting bushes included\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e3-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e25.4mm rear anti-roll bar\u003c\/li\u003e\n\u003cli\u003eMounting bushes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e3 pieces in total.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eToyota \/ Yaris (4th Gen) 2020-Present \/ Hatchback (XP210) 2020-2024 \/ Yaris 1.6T GR 2020-2024\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (12th Gen) 2018-Present \/ Hatchback (E210) 2019-Present \/ Corolla 1.6 Turbo GR (GZEA14) 2023-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Yaris (4th Gen) 2020-Present \/ Hachtback facelift (XP210) 2024-Present \/ Yaris 1.6T GR 2024-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e For 1.6T AWD (GXPA16\/GZEA14) Only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on a ramp or axle stands. Undo the drop links and bush brackets and remove the factory bar. Fit the Hardrace bar with its bushes, refit the brackets and links, and tighten everything to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. No wheel alignment is needed for the bar alone. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-front-anti-roll-bar-arb-25-4mm-5pc-set-toyota-gr-yaris-20\"\u003eHardrace 25.4mm adjustable front anti-roll bar for GR Yaris\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eHardrace rear adjustable stabiliser links for GR Yaris\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment after fitting?\u003c\/h3\u003e\n\u003cp\u003eNo. An anti-roll bar does not change camber, toe or caster. You only need an alignment if you change the ride height at the same time.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eA stiffer bar is felt mainly in corners and over bumps that hit one side of the car. Over bumps that hit both wheels evenly, the ride is largely unchanged.\u003c\/p\u003e\n\u003ch3\u003eCan I use my standard drop links?\u003c\/h3\u003e\n\u003cp\u003eYes. On a lowered car, adjustable drop links let you set the bar level at rest, so it is not pre-loaded.\u003c\/p\u003e\n\u003ch3\u003eShould I upgrade the front bar too?\u003c\/h3\u003e\n\u003cp\u003eUpgrading both ends cuts roll at both axles while keeping the balance closer to standard. Upgrading one end only shifts the balance: a stiffer front adds understeer, a stiffer rear adds oversteer.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780122538296,"sku":"HR-Q0810","price":230.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/q0810-1.jpg?v=1678899449"},{"product_id":"hardrace-adjustable-universal-drop-links-10mm-rod-ends-100-109mm","title":"Hardrace Adjustable Universal Drop Links 10mm Rod Ends 100-109mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 100-120mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 100-120mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 100-120mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop link\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Convertible (V36) 2009-2013 \/ G37 Convertible 3.7 2009-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Coupe (V36) 2008-2013 \/ G37 Coupe 3.7 2008-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Sedan (V36) 2006-2013 \/ G25 Sedan 2.5 2010-2012\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Sedan (V36) 2006-2013 \/ G35 Sedan 3.5 2006-2008\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Sedan (V36) 2006-2013 \/ G37 Sedan 3.7 2007-2013\u003c\/li\u003e\n\u003cli\u003eNissan \/ 350Z 2002-2009 \/ Coupe (Z33) 2002-2009 \/ 350Z 3.5 2002-2009\u003c\/li\u003e\n\u003cli\u003ePorsche \/ 911 (5th Gen) 1997-2005 \/ 911 (996) 1997-2005 \/ 911 Carrera 3.4 1997-2002\u003c\/li\u003e\n\u003cli\u003ePorsche \/ 911 (5th Gen) 1997-2005 \/ 911 (996) 1997-2005 \/ 911 Carrera 4 3.4 1997-2002\u003c\/li\u003e\n\u003cli\u003eFord \/ Focus (4th Gen) 2018-Present \/ Hatchback (C519) 2018-Present \/ Focus 1.0 Turbo 2018-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Focus (4th Gen) 2018-Present \/ Hatchback (C519) 2018-Present \/ Focus 1.0 Turbo Hybrid 2018-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Focus (4th Gen) 2018-Present \/ Hatchback (C519) 2018-Present \/ Focus 1.5 TD 2018-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Focus (4th Gen) 2018-Present \/ Hatchback (C519) 2018-Present \/ Focus 1.5 Turbo 2018-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Focus (4th Gen) 2018-Present \/ Hatchback (C519) 2018-Present \/ Focus 2.0 TD 2018-Present\u003c\/li\u003e\n\u003cli\u003eNissan \/ 350Z 2002-2009 \/ Coupe (Z33) 2002-2009 \/ 350Z 3.5 (w\/ Brembo) 2002-2009\u003c\/li\u003e\n\u003cli\u003eNissan \/ 350Z 2002-2009 \/ Roadster (Z33) 2004-2009 \/ 350Z 3.5 (w\/ Brembo) 2004-2009\u003c\/li\u003e\n\u003cli\u003eNissan \/ 350Z 2002-2009 \/ Roadster (Z33) 2004-2009 \/ 350Z 3.5 2004-2009\u003c\/li\u003e\n\u003cli\u003eNissan \/ 370Z 2009-Present \/ Coupe (Z34) 2009-Present \/ 370Z 3.7 2009-Present\u003c\/li\u003e\n\u003cli\u003eNissan \/ 370Z 2009-Present \/ Roadster (Z34) 2009-Present \/ 370Z 3.7 2009-Present\u003c\/li\u003e\n\u003cli\u003eHonda \/ Accord 4-Door Sedan \/ 2003-2005 \/ 2.0i\u003c\/li\u003e\n\u003cli\u003eHonda \/ Accord 4-Door Sedan \/ 2003-2005 \/ 2.4i\u003c\/li\u003e\n\u003cli\u003eHonda \/ Accord 4-Door Sedan \/ 2005-2008 \/ 2.0i\u003c\/li\u003e\n\u003cli\u003eHonda \/ Accord 4-Door Sedan \/ 2005-2008 \/ 2.4i\u003c\/li\u003e\n\u003cli\u003eHonda \/ CR-V \/ 2017-2023 \/ 2.0 2WD\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Focus MK4 : Not For Wagon use; Porsche 996: For C2\/C4\/Turbo Rear Side use; CR-V '17-: For AWD Rear Side use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780138529080,"sku":"HR-6853-100","price":106.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201512992409u2d40ms.jpg?v=1678899660"},{"product_id":"hardrace-adjustable-universal-drop-links-10mm-rod-ends-125-164mm","title":"Hardrace Adjustable Universal Drop Links 10mm Rod Ends 125-164mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 125-164mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 125-164mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 125-164mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW \/ 1-Series (2nd Gen) \/ Hatchback 3DR (F21) \/ 2011-2019\u003c\/li\u003e\n\u003cli\u003eBMW \/ 1-Series (2nd Gen) \/ Hatchback 5DR (F20) \/ 2011-2019\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (6th Gen) \/ Gran Turismo (F34) \/ 2011-2019\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (6th Gen) \/ Sedan (F30) \/ 2011-2019\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (6th Gen) \/ Touring (F31) \/ 2011-2019\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (7th Gen) \/ Sedan (G20) \/ 2019-Present\u003c\/li\u003e\n\u003cli\u003eBMW \/ 4-Series (2nd Gen) \/ Convertible (G23) \/ 2020-Present\u003c\/li\u003e\n\u003cli\u003eBMW \/ 4-Series (2nd Gen) \/ Coupe (G22) \/ 2020-Present\u003c\/li\u003e\n\u003cli\u003eBMW \/ 4-Series (2nd Gen) \/ Gran Coupe (G26) \/ 2020-Present\u003c\/li\u003e\n\u003cli\u003eBMW \/ Z4 (3rd Gen) \/ Roadster (G29) \/ 2019-Present\u003c\/li\u003e\n\u003cli\u003eHonda \/ Accord 4-Door Sedan \/ 2008-2011\u003c\/li\u003e\n\u003cli\u003eMazda \/ 3 (3rd Gen) \/ Hatchback (BM\/BN) \/ 2013-2018\u003c\/li\u003e\n\u003cli\u003eMazda \/ 3 (3rd Gen) \/ Sedan (BM\/BN) \/ 2013-2018\u003c\/li\u003e\n\u003cli\u003eMazda \/ 6 (3rd Gen) \/ Sedan (GJ\/GL) \/ 2012-Present\u003c\/li\u003e\n\u003cli\u003eMazda \/ 6 (3rd Gen) \/ Wagon (GJ\/GL) \/ 2012-Present\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-5 (1st Gen) \/ SUV (KE) \/ 2012-2017\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-5 (2nd Gen) \/ SUV (KF) \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-9 (2nd Gen) \/ SUV (TC) \/ 2016-Present\u003c\/li\u003e\n\u003cli\u003eTesla \/ Model 3 \/ Sedan (5YJ3) \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eTesla \/ Model Y \/ SUV \/ 2020-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Supra (5th Gen) \/ Coupe (A90) \/ 2019-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780138561848,"sku":"HR-8659-140","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/2017541032810b3a28yc.jpg?v=1678899661"},{"product_id":"hardrace-adjustable-universal-drop-links-10mm-rod-ends-160-199mm","title":"Hardrace Adjustable Universal Drop Links 10mm Rod Ends 160-199mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 160-199mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 160-199mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 160-199mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop link\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAlfa Romeo \/ 147 \/ Hatchback (937) \/ 2000-2010\u003c\/li\u003e\n\u003cli\u003eAlfa Romeo \/ 156 \/ Sedan (932) \/ 1997-2007\u003c\/li\u003e\n\u003cli\u003eAlfa Romeo \/ 156 \/ Wagon (932) \/ 1997-2007\u003c\/li\u003e\n\u003cli\u003eAlfa Romeo \/ GT \/ Coupe (937) \/ 2003-2010\u003c\/li\u003e\n\u003cli\u003eMazda \/ 323 (8th Gen) \/ Hatchback (BJ) \/ 1998-2003\u003c\/li\u003e\n\u003cli\u003eMazda \/ 323 (8th Gen) \/ Sedan (BJ) \/ 1998-2003\u003c\/li\u003e\n\u003cli\u003eMazda \/ Premacy (1st Gen) \/ MPV (CP) (5 Seat) \/ 1999-2005\u003c\/li\u003e\n\u003cli\u003eMazda \/ Premacy (1st Gen) \/ MPV (CP) (7 Seat) \/ 1999-2005\u003c\/li\u003e\n\u003cli\u003eToyota \/ MR2 (2nd Gen) \/ Coupe (W20) \/ 1989-1999\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780138594616,"sku":"HR-8659-180","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20167794239d42x3vs.jpg?v=1678899661"},{"product_id":"hardrace-adjustable-universal-drop-links-10mm-rod-ends-200-239mm","title":"Hardrace Adjustable Universal Drop Links 10mm Rod Ends 200-239mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 200-239mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 200-239mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 200-239mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop link\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHonda \/ Civic 3-Door Hatchback \/ 2007-2011\u003c\/li\u003e\n\u003cli\u003eHonda \/ Civic 5-Door Hatchback \/ 2005-2012\u003c\/li\u003e\n\u003cli\u003eKia \/ Picanto (1st Gen) \/ Hatchback (BA\/SA) \/ 2004-2011\u003c\/li\u003e\n\u003cli\u003eLexus \/ ES (4th Gen) \/ Sedan (XV30) \/ 2001-2006\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (2nd Gen) \/ SUV (XU30) \/ 2003-2009\u003c\/li\u003e\n\u003cli\u003eMINI \/ Mini (1st Gen) \/ Convertible (R52) \/ 2001-2008\u003c\/li\u003e\n\u003cli\u003eMINI \/ Mini (1st Gen) \/ Hatchback (R50) \/ 2001-2008\u003c\/li\u003e\n\u003cli\u003eMINI \/ Mini (1st Gen) \/ Hatchback (R53) \/ 2001-2008\u003c\/li\u003e\n\u003cli\u003eToyota \/ Camry  (7th Gen) \/ Sedan (XV40) \/ 2007-2012\u003c\/li\u003e\n\u003cli\u003eToyota \/ Camry (6th Gen) \/ Sedan (XV30) \/ 2001-2006\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780138627384,"sku":"HR-8659-220","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20168413391313k39g13cv.jpg?v=1678899662"},{"product_id":"hardrace-adjustable-universal-drop-links-10mm-rod-ends-240-279mm","title":"Hardrace Adjustable Universal Drop Links 10mm Rod Ends 240-279mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 240-279mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 240-279mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 240-279mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi \/ A1 (1st Gen) \/ 2010-2018\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (4th Gen) \/ 1998-2007\u003c\/li\u003e\n\u003cli\u003eBMW \/ Z4 (1st Gen) \/ 2003-2009\u003c\/li\u003e\n\u003cli\u003eFord \/ Fiesta (6th Gen) (UKDM MK7) \/ 2008-2017\u003c\/li\u003e\n\u003cli\u003eMazda \/ 2 (3rd Gen) \/ 2007-2014\u003c\/li\u003e\n\u003cli\u003eMazda \/ 3 (4th Gen) \/ 2019-Present\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-3 \/ 2015-Present\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-30 \/ 2019-Present\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Eclipse Cross \/ 2018-Present\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (8th Gen) \/ 2007-2017\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Outlander (2nd Gen) \/ 2007-2012\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Outlander (3rd Gen) \/ 2012-Present\u003c\/li\u003e\n\u003cli\u003eNissan \/ Cube (3rd Gen) \/ 2008-2011\u003c\/li\u003e\n\u003cli\u003eNissan \/ Micra (3rd Gen) \/ 2003-2010\u003c\/li\u003e\n\u003cli\u003eNissan \/ Micra (4th Gen) \/ 2010-2017\u003c\/li\u003e\n\u003cli\u003eSkoda \/ Fabia (2nd Gen) \/ 2007-2014\u003c\/li\u003e\n\u003cli\u003eSkoda \/ Fabia (3rd Gen) \/ 2014-2022\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ SX4 (MK1) \/ 2006-2013\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ SX4 S-Cross \/ 2013-2021\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Swift (MK5) \/ 2010-2017\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Vitara (MK4) \/ 2015-Present\u003c\/li\u003e\n\u003cli\u003eVolkswagen \/ Polo (5th Gen) \/ 2009-2017\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780138922296,"sku":"HR-8659-260","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201662413132313r13w23gq.jpg?v=1678899664"},{"product_id":"hardrace-adjustable-universal-drop-links-10mm-rod-ends-280-319mm","title":"Hardrace Adjustable Universal Drop Links 10mm Rod Ends 280-319mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 280-319mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 280-319mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 280-319mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW \/ 1-Series (1st Gen) \/ 2003-2013\u003c\/li\u003e\n\u003cli\u003eBMW \/ 1-Series (2nd Gen) \/ 2011-2019\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (5th Gen) \/ 2004-2013\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (6th Gen) \/ 2011-2019\u003c\/li\u003e\n\u003cli\u003eBMW \/ 4-Series (2nd Gen) \/ 2020-Present\u003c\/li\u003e\n\u003cli\u003eBMW \/ Z4 (2nd Gen) \/ 2009-2016\u003c\/li\u003e\n\u003cli\u003eFord \/ Kuga (2nd Gen) \/ 2012-2019\u003c\/li\u003e\n\u003cli\u003eFord \/ Mondeo (4th Gen) \/ 2007-2014\u003c\/li\u003e\n\u003cli\u003eHonda \/ Civic 5-Door Hatchback \/ 2022-Present\u003c\/li\u003e\n\u003cli\u003eHonda \/ Jazz (1st Gen) \/ 2002-2008\u003c\/li\u003e\n\u003cli\u003eHonda \/ Jazz (2nd Gen) \/ 2008-2015\u003c\/li\u003e\n\u003cli\u003eHonda \/ Jazz (3rd Gen) \/ 2015-2020\u003c\/li\u003e\n\u003cli\u003eHonda \/ Jazz (4th Gen) \/ 2020-Present\u003c\/li\u003e\n\u003cli\u003eMG \/ ZS \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eMINI \/ Mini (2nd Gen) \/ 2006-2016\u003c\/li\u003e\n\u003cli\u003eMazda \/ 3 (3rd Gen) \/ 2013-2018\u003c\/li\u003e\n\u003cli\u003eMazda \/ 5 (2nd Gen) \/ 2005-2010\u003c\/li\u003e\n\u003cli\u003eMazda \/ 6 (3rd Gen) \/ 2012-Present\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-5 (1st Gen) \/ 2012-2017\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-5 (2nd Gen) \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-9 (2nd Gen) \/ 2016-Present\u003c\/li\u003e\n\u003cli\u003eMini \/ Countryman (3rd Gen) \/ 2023-Present\u003c\/li\u003e\n\u003cli\u003eMini \/ Mini (3rd Gen) \/ 2014-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ S60 (2nd Gen) \/ 2010-2018\u003c\/li\u003e\n\u003cli\u003eVolvo \/ S80 (2nd Gen) \/ 2006-2016\u003c\/li\u003e\n\u003cli\u003eVolvo \/ V60 (1st Gen) \/ 2010-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ V70 (3rd Gen) \/ 2007-2016\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC70 (2nd Gen) \/ 2007-2016\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Porsche 996\/997: For C4\/Turbo Front Side use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780138955064,"sku":"HR-8659-300","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20166241331113w31d1wn.jpg?v=1678899665"},{"product_id":"hardrace-adjustable-universal-drop-links-12mm-rod-ends-104-130mm","title":"Hardrace Adjustable Universal Drop Links 12mm Rod Ends 104-130mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 104-130mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 104-130mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 104-130mm\u003c\/li\u003e\n\u003cli\u003e12mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInfiniti \/ FX (2nd Gen) 2008-2013 \/ SUV (S51) 2008-2013 \/ FX30D 3.0 TD 2010-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ FX (2nd Gen) 2008-2013 \/ SUV (S51) 2008-2013 \/ FX37 3.7 2008-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ FX (2nd Gen) 2008-2013 \/ SUV (S51) 2008-2013 \/ FX50 5.0 2008-2013\u003c\/li\u003e\n\u003cli\u003eLexus \/ LS (1st Gen) 1989-1994 \/ Sedan (XF10) 1989-1994 \/ LS400 4.0 (UCF10) 1989-1992\u003c\/li\u003e\n\u003cli\u003eLexus \/ LS (1st Gen) 1989-1994 \/ Sedan (XF10) 1989-1994 \/ LS400 4.0 (UCF11) 1992-1994\u003c\/li\u003e\n\u003cli\u003eLexus \/ LS (2nd Gen) 1994-2000 \/ Sedan (XF20) 1994-2000 \/ LS400 4.0 (UCF20\/UCF21) 1994-2000\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (3rd Gen) 2008-2015 \/ SUV (AL10) 2008-2015 \/ RX270 2.7 (AGL10) 2008-2015\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (3rd Gen) 2008-2015 \/ SUV (AL10) 2008-2015 \/ RX350 3.5 (AWD) (GGL15) 2008-2012\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (3rd Gen) 2008-2015 \/ SUV (AL10) 2008-2015 \/ RX350 3.5 (GRL10) 2008-2012\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (3rd Gen) 2008-2015 \/ SUV (AL10) 2008-2015 \/ RX350 3.5 (GYL10) 2008-2015\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (3rd Gen) 2008-2015 \/ SUV (AL10) 2008-2015 \/ RX450h Hybrid 3.5 (AWD) (GYL15) 2008-2015\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (3rd Gen) 2008-2015 \/ SUV (AL10) 2008-2015 \/ RX450h Hybrid 3.5 (GYL10) 2008-2015\u003c\/li\u003e\n\u003cli\u003eFord \/ Kuga (3rd Gen) 2019-Present \/ SUV (CX482) 2019-Present \/ Kuga 1.5 Turbo 2019-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Kuga (3rd Gen) 2019-Present \/ SUV (CX482) 2019-Present \/ Kuga 2.0 Turbo 2019-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Kuga (3rd Gen) 2019-Present \/ SUV (CX482) 2019-Present \/ Kuga 2.0TD 2019-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Kuga (3rd Gen) 2019-Present \/ SUV (CX482) 2019-Present \/ Kuga 2.5 Hybrid 2019-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Kuga (3rd Gen) 2019-Present \/ SUV (CX482) 2019-Present \/ Kuga 2.5 PHEV 2019-Present\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (4th Gen) 2015-2023 \/ SUV (AL20) 2015-2023 \/ RX200t 2.0 Turbo (AGL20) 2015-2023\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (4th Gen) 2015-2023 \/ SUV (AL20) 2015-2023 \/ RX200t 2.0 Turbo (AWD) (AGL25) 2015-2023\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (4th Gen) 2015-2023 \/ SUV (AL20) 2015-2023 \/ RX350 3.5 (AWD) (GGL25) 2015-2023\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (4th Gen) 2015-2023 \/ SUV (AL20) 2015-2023 \/ RX450h Hybrid 3.5 (AWD) (GYL25) 2015-2023\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (4th Gen) 2015-2023 \/ SUV (AL20) 2015-2023 \/ RX450h Hybrid 3.5 (GYL20) 2015-2023\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139020600,"sku":"HR-8793-110","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201721616354516k35m45yu.jpg?v=1678899666"},{"product_id":"hardrace-adjustable-universal-drop-links-12mm-rod-ends-123-162mm","title":"Hardrace Adjustable Universal Drop Links 12mm Rod Ends 123-162mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 123-162mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 123-162mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 123-162mm\u003c\/li\u003e\n\u003cli\u003e12mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFord \/ Mustang (6th Gen) \/ Convertible (S550) \/ 2014-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Mustang (6th Gen) \/ Coupe (S550) \/ 2014-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ S60 (1st Gen) \/ Sedan (P24) \/ 2000-2009\u003c\/li\u003e\n\u003cli\u003eVolvo \/ S80 (1st Gen) \/ Sedan (TS) \/ 1998-2006\u003c\/li\u003e\n\u003cli\u003eVolvo \/ V70 (2nd Gen) \/ Wagon (Cross Country) \/ 2000-2007\u003c\/li\u003e\n\u003cli\u003eVolvo \/ V70 (2nd Gen) \/ Wagon (SW) \/ 2000-2007\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC70 (1st Gen) \/ Wagon \/ 2000-2007\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC90 (1st Gen) \/ SUV \/ 2002-2014\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Ace use (Rear).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139184440,"sku":"HR-8793-140","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/2017291348913z48b9jg.jpg?v=1678899668"},{"product_id":"hardrace-adjustable-universal-drop-links-12mm-rod-ends-163-202mm","title":"Hardrace Adjustable Universal Drop Links 12mm Rod Ends 163-202mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 163-202mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 163-202mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 163-202mm\u003c\/li\u003e\n\u003cli\u003e12mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW \/ 5-Series (6th Gen) \/ Gran Turismo (F07) \/ 2008-2017\u003c\/li\u003e\n\u003cli\u003eVolvo \/ S60 (3rd Gen) \/ Sedan \/ 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ S90 (2nd Gen) \/ Sedan \/ 2016-2025\u003c\/li\u003e\n\u003cli\u003eVolvo \/ V60 (2nd Gen) \/ Wagon \/ 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ V90 (2nd Gen) \/ Wagon \/ 2016-2025\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC60 (2nd Gen) \/ SUV \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC90 (2nd Gen) \/ SUV \/ 2014-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e BMW G30: For AWD use (Front).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-universal-adjustable-stabiliser-link-2pcs-range-90-110mm-12mm-stud-rod-end\"\u003eHardrace Universal Adjustable Stabiliser Link 2pcs Range 90-110mm 12mm Stud Rod End\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139217208,"sku":"HR-8793-180","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20172913484113l48d41tj.jpg?v=1678899668"},{"product_id":"hardrace-adjustable-universal-drop-links-12mm-rod-ends-203-242mm","title":"Hardrace Adjustable Universal Drop Links 12mm Rod Ends 203-242mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 203-242mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 203-242mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 203-242mm\u003c\/li\u003e\n\u003cli\u003e12mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW \/ 5-Series (7th Gen) \/ Sedan (G30) \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eBMW \/ 5-Series (7th Gen) \/ Touring (G31) \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eCadillac \/ ATS \/ Sedan \/ 2012-Present\u003c\/li\u003e\n\u003cli\u003eCadillac \/ CTS (3rd Gen) \/ Sedan \/ 2013-Present\u003c\/li\u003e\n\u003cli\u003eChevrolet \/ Camaro (6th Gen) \/ Coupe \/ 2015-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Mustang (6th Gen) \/ Convertible (S550) \/ 2014-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Mustang (6th Gen) \/ Coupe (S550) \/ 2014-Present\u003c\/li\u003e\n\u003cli\u003eSaab \/ 95 \/ 1999-2008\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e BMW G30: For RWD use (Front).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139249976,"sku":"HR-8793-220","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20172913491013n49k10fa.jpg?v=1678899669"},{"product_id":"hardrace-adjustable-universal-drop-links-12mm-rod-ends-243-282mm","title":"Hardrace Adjustable Universal Drop Links 12mm Rod Ends 243-282mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 243-282mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 243-282mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 243-282mm\u003c\/li\u003e\n\u003cli\u003e12mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLexus \/ ES (4th Gen) \/ Sedan (XV30) \/ 2001-2006\u003c\/li\u003e\n\u003cli\u003eLexus \/ GS (1st Gen) \/ Sedan (S140) \/ 1991-1997\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (2nd Gen) \/ SUV (XU30) \/ 2003-2009\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (3rd Gen) \/ SUV (AL10) \/ 2008-2015\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (4th Gen) \/ SUV (AL20) \/ 2015-2023\u003c\/li\u003e\n\u003cli\u003eMG \/ HS \/ SUV \/ 2019-Present\u003c\/li\u003e\n\u003cli\u003eNissan \/ Juke \/ SUV (F15) \/ 2010-Present\u003c\/li\u003e\n\u003cli\u003eTesla \/ Model 3 \/ Sedan (5YJ3) \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eTesla \/ Model Y \/ SUV \/ 2020-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Camry  (7th Gen) \/ Sedan (XV40) \/ 2007-2012\u003c\/li\u003e\n\u003cli\u003eToyota \/ Camry (6th Gen) \/ Sedan (XV30) \/ 2001-2006\u003c\/li\u003e\n\u003cli\u003eToyota \/ Camry (9th Gen) \/ Sedan (XV70) \/ 2017-2024\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (10th Gen) \/ Sedan (E150) \/ 2007-2013\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (11th Gen) \/ Sedan (E170) \/ 2013-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) \/ Hatchback (E120) \/ 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) \/ Sedan (E120) \/ 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) \/ Wagon (E120) \/ 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Previa (2nd Gen) \/ MPV (XR30) \/ 2000-2006\u003c\/li\u003e\n\u003cli\u003eToyota \/ RAV4 (6th Gen) \/ SUV (XA60) \/ 2025-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-reinforced-front-drop-links-2pc-set-toyota-camry-xv30\"\u003eHardrace Reinforced Front Drop Links 2Pc Set Toyota Camry XV30 01-06\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-reinforced-rear-drop-links-2pc-set-toyota-camry-xv30\"\u003eHardrace Reinforced Rear Drop Links 2Pc Set Toyota Camry XV30 01-06\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-reinforced-20mm-shortened-front-stabilizer-links-2pc-set-toyota-camry-xv40-06-11\"\u003eHardrace Reinforced 20mm Shortened Front Stabilizer Links 2Pc Set Toyota Camry XV40 06-11\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139282744,"sku":"HR-8793-260","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20172913493213w49o32is.jpg?v=1678899669"}],"url":"https:\/\/hardraceshop.com\/collections\/hardrace-toyota-corolla-suspension-parts.oembed","provider":"Hardrace Shop","version":"1.0","type":"link"}