{"title":"Hardrace Volvo XC40 Suspension Parts","description":"\u003cp\u003eHardrace Volvo XC40 suspension parts for the 2018-on XC40: a front strut brace, front lower and middle lower braces, a rear subframe brace, a 28mm rear anti roll bar, an adjustable rear stabiliser link and hardened rubber rear camber and toe kits that also fit the Lynk \u0026amp; Co 01.\u003c\/p\u003e\u003cp\u003eThe four \u003ca href=\"\/collections\/hardrace-chassis-braces\"\u003ebraces\u003c\/a\u003e suit this tall \u003ca href=\"\/collections\/hardrace-volvo-suspension-components\"\u003eVolvo\u003c\/a\u003e: the strut brace stops the front towers flexing, the lower braces stiffen the floor and the subframe brace locates the rear axle more firmly for sharper steering. The 28mm rear anti roll bar cuts body roll, with the adjustable stabiliser link allowing for a ride height change. If the XC40 is lowered, the rear camber and toe kits bring the alignment back into range with hardened rubber bushes for a quiet ride. Free UK delivery over £100 and 14 day returns.\u003c\/p\u003e","products":[{"product_id":"hardrace-adjustable-universal-drop-links-10mm-rod-ends-100-109mm","title":"Hardrace Adjustable Universal Drop Links 10mm Rod Ends 100-109mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 100-120mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 100-120mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 100-120mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop link\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Convertible (V36) 2009-2013 \/ G37 Convertible 3.7 2009-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Coupe (V36) 2008-2013 \/ G37 Coupe 3.7 2008-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Sedan (V36) 2006-2013 \/ G25 Sedan 2.5 2010-2012\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Sedan (V36) 2006-2013 \/ G35 Sedan 3.5 2006-2008\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ G (4th Gen) 2006-2013 \/ Sedan (V36) 2006-2013 \/ G37 Sedan 3.7 2007-2013\u003c\/li\u003e\n\u003cli\u003eNissan \/ 350Z 2002-2009 \/ Coupe (Z33) 2002-2009 \/ 350Z 3.5 2002-2009\u003c\/li\u003e\n\u003cli\u003ePorsche \/ 911 (5th Gen) 1997-2005 \/ 911 (996) 1997-2005 \/ 911 Carrera 3.4 1997-2002\u003c\/li\u003e\n\u003cli\u003ePorsche \/ 911 (5th Gen) 1997-2005 \/ 911 (996) 1997-2005 \/ 911 Carrera 4 3.4 1997-2002\u003c\/li\u003e\n\u003cli\u003eFord \/ Focus (4th Gen) 2018-Present \/ Hatchback (C519) 2018-Present \/ Focus 1.0 Turbo 2018-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Focus (4th Gen) 2018-Present \/ Hatchback (C519) 2018-Present \/ Focus 1.0 Turbo Hybrid 2018-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Focus (4th Gen) 2018-Present \/ Hatchback (C519) 2018-Present \/ Focus 1.5 TD 2018-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Focus (4th Gen) 2018-Present \/ Hatchback (C519) 2018-Present \/ Focus 1.5 Turbo 2018-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Focus (4th Gen) 2018-Present \/ Hatchback (C519) 2018-Present \/ Focus 2.0 TD 2018-Present\u003c\/li\u003e\n\u003cli\u003eNissan \/ 350Z 2002-2009 \/ Coupe (Z33) 2002-2009 \/ 350Z 3.5 (w\/ Brembo) 2002-2009\u003c\/li\u003e\n\u003cli\u003eNissan \/ 350Z 2002-2009 \/ Roadster (Z33) 2004-2009 \/ 350Z 3.5 (w\/ Brembo) 2004-2009\u003c\/li\u003e\n\u003cli\u003eNissan \/ 350Z 2002-2009 \/ Roadster (Z33) 2004-2009 \/ 350Z 3.5 2004-2009\u003c\/li\u003e\n\u003cli\u003eNissan \/ 370Z 2009-Present \/ Coupe (Z34) 2009-Present \/ 370Z 3.7 2009-Present\u003c\/li\u003e\n\u003cli\u003eNissan \/ 370Z 2009-Present \/ Roadster (Z34) 2009-Present \/ 370Z 3.7 2009-Present\u003c\/li\u003e\n\u003cli\u003eHonda \/ Accord 4-Door Sedan \/ 2003-2005 \/ 2.0i\u003c\/li\u003e\n\u003cli\u003eHonda \/ Accord 4-Door Sedan \/ 2003-2005 \/ 2.4i\u003c\/li\u003e\n\u003cli\u003eHonda \/ Accord 4-Door Sedan \/ 2005-2008 \/ 2.0i\u003c\/li\u003e\n\u003cli\u003eHonda \/ Accord 4-Door Sedan \/ 2005-2008 \/ 2.4i\u003c\/li\u003e\n\u003cli\u003eHonda \/ CR-V \/ 2017-2023 \/ 2.0 2WD\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Focus MK4 : Not For Wagon use; Porsche 996: For C2\/C4\/Turbo Rear Side use; CR-V '17-: For AWD Rear Side use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780138529080,"sku":"HR-6853-100","price":106.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201512992409u2d40ms.jpg?v=1678899660"},{"product_id":"hardrace-adjustable-universal-drop-links-10mm-rod-ends-125-164mm","title":"Hardrace Adjustable Universal Drop Links 10mm Rod Ends 125-164mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 125-164mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 125-164mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 125-164mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW \/ 1-Series (2nd Gen) \/ Hatchback 3DR (F21) \/ 2011-2019\u003c\/li\u003e\n\u003cli\u003eBMW \/ 1-Series (2nd Gen) \/ Hatchback 5DR (F20) \/ 2011-2019\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (6th Gen) \/ Gran Turismo (F34) \/ 2011-2019\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (6th Gen) \/ Sedan (F30) \/ 2011-2019\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (6th Gen) \/ Touring (F31) \/ 2011-2019\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (7th Gen) \/ Sedan (G20) \/ 2019-Present\u003c\/li\u003e\n\u003cli\u003eBMW \/ 4-Series (2nd Gen) \/ Convertible (G23) \/ 2020-Present\u003c\/li\u003e\n\u003cli\u003eBMW \/ 4-Series (2nd Gen) \/ Coupe (G22) \/ 2020-Present\u003c\/li\u003e\n\u003cli\u003eBMW \/ 4-Series (2nd Gen) \/ Gran Coupe (G26) \/ 2020-Present\u003c\/li\u003e\n\u003cli\u003eBMW \/ Z4 (3rd Gen) \/ Roadster (G29) \/ 2019-Present\u003c\/li\u003e\n\u003cli\u003eHonda \/ Accord 4-Door Sedan \/ 2008-2011\u003c\/li\u003e\n\u003cli\u003eMazda \/ 3 (3rd Gen) \/ Hatchback (BM\/BN) \/ 2013-2018\u003c\/li\u003e\n\u003cli\u003eMazda \/ 3 (3rd Gen) \/ Sedan (BM\/BN) \/ 2013-2018\u003c\/li\u003e\n\u003cli\u003eMazda \/ 6 (3rd Gen) \/ Sedan (GJ\/GL) \/ 2012-Present\u003c\/li\u003e\n\u003cli\u003eMazda \/ 6 (3rd Gen) \/ Wagon (GJ\/GL) \/ 2012-Present\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-5 (1st Gen) \/ SUV (KE) \/ 2012-2017\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-5 (2nd Gen) \/ SUV (KF) \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-9 (2nd Gen) \/ SUV (TC) \/ 2016-Present\u003c\/li\u003e\n\u003cli\u003eTesla \/ Model 3 \/ Sedan (5YJ3) \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eTesla \/ Model Y \/ SUV \/ 2020-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Supra (5th Gen) \/ Coupe (A90) \/ 2019-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780138561848,"sku":"HR-8659-140","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/2017541032810b3a28yc.jpg?v=1678899661"},{"product_id":"hardrace-adjustable-universal-drop-links-10mm-rod-ends-160-199mm","title":"Hardrace Adjustable Universal Drop Links 10mm Rod Ends 160-199mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 160-199mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 160-199mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 160-199mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop link\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAlfa Romeo \/ 147 \/ Hatchback (937) \/ 2000-2010\u003c\/li\u003e\n\u003cli\u003eAlfa Romeo \/ 156 \/ Sedan (932) \/ 1997-2007\u003c\/li\u003e\n\u003cli\u003eAlfa Romeo \/ 156 \/ Wagon (932) \/ 1997-2007\u003c\/li\u003e\n\u003cli\u003eAlfa Romeo \/ GT \/ Coupe (937) \/ 2003-2010\u003c\/li\u003e\n\u003cli\u003eMazda \/ 323 (8th Gen) \/ Hatchback (BJ) \/ 1998-2003\u003c\/li\u003e\n\u003cli\u003eMazda \/ 323 (8th Gen) \/ Sedan (BJ) \/ 1998-2003\u003c\/li\u003e\n\u003cli\u003eMazda \/ Premacy (1st Gen) \/ MPV (CP) (5 Seat) \/ 1999-2005\u003c\/li\u003e\n\u003cli\u003eMazda \/ Premacy (1st Gen) \/ MPV (CP) (7 Seat) \/ 1999-2005\u003c\/li\u003e\n\u003cli\u003eToyota \/ MR2 (2nd Gen) \/ Coupe (W20) \/ 1989-1999\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780138594616,"sku":"HR-8659-180","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20167794239d42x3vs.jpg?v=1678899661"},{"product_id":"hardrace-adjustable-universal-drop-links-10mm-rod-ends-200-239mm","title":"Hardrace Adjustable Universal Drop Links 10mm Rod Ends 200-239mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 200-239mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 200-239mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 200-239mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop link\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHonda \/ Civic 3-Door Hatchback \/ 2007-2011\u003c\/li\u003e\n\u003cli\u003eHonda \/ Civic 5-Door Hatchback \/ 2005-2012\u003c\/li\u003e\n\u003cli\u003eKia \/ Picanto (1st Gen) \/ Hatchback (BA\/SA) \/ 2004-2011\u003c\/li\u003e\n\u003cli\u003eLexus \/ ES (4th Gen) \/ Sedan (XV30) \/ 2001-2006\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (2nd Gen) \/ SUV (XU30) \/ 2003-2009\u003c\/li\u003e\n\u003cli\u003eMINI \/ Mini (1st Gen) \/ Convertible (R52) \/ 2001-2008\u003c\/li\u003e\n\u003cli\u003eMINI \/ Mini (1st Gen) \/ Hatchback (R50) \/ 2001-2008\u003c\/li\u003e\n\u003cli\u003eMINI \/ Mini (1st Gen) \/ Hatchback (R53) \/ 2001-2008\u003c\/li\u003e\n\u003cli\u003eToyota \/ Camry  (7th Gen) \/ Sedan (XV40) \/ 2007-2012\u003c\/li\u003e\n\u003cli\u003eToyota \/ Camry (6th Gen) \/ Sedan (XV30) \/ 2001-2006\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780138627384,"sku":"HR-8659-220","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20168413391313k39g13cv.jpg?v=1678899662"},{"product_id":"hardrace-adjustable-universal-drop-links-10mm-rod-ends-240-279mm","title":"Hardrace Adjustable Universal Drop Links 10mm Rod Ends 240-279mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 240-279mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 240-279mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 240-279mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi \/ A1 (1st Gen) \/ 2010-2018\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (4th Gen) \/ 1998-2007\u003c\/li\u003e\n\u003cli\u003eBMW \/ Z4 (1st Gen) \/ 2003-2009\u003c\/li\u003e\n\u003cli\u003eFord \/ Fiesta (6th Gen) (UKDM MK7) \/ 2008-2017\u003c\/li\u003e\n\u003cli\u003eMazda \/ 2 (3rd Gen) \/ 2007-2014\u003c\/li\u003e\n\u003cli\u003eMazda \/ 3 (4th Gen) \/ 2019-Present\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-3 \/ 2015-Present\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-30 \/ 2019-Present\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Eclipse Cross \/ 2018-Present\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Lancer (8th Gen) \/ 2007-2017\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Outlander (2nd Gen) \/ 2007-2012\u003c\/li\u003e\n\u003cli\u003eMitsubishi \/ Outlander (3rd Gen) \/ 2012-Present\u003c\/li\u003e\n\u003cli\u003eNissan \/ Cube (3rd Gen) \/ 2008-2011\u003c\/li\u003e\n\u003cli\u003eNissan \/ Micra (3rd Gen) \/ 2003-2010\u003c\/li\u003e\n\u003cli\u003eNissan \/ Micra (4th Gen) \/ 2010-2017\u003c\/li\u003e\n\u003cli\u003eSkoda \/ Fabia (2nd Gen) \/ 2007-2014\u003c\/li\u003e\n\u003cli\u003eSkoda \/ Fabia (3rd Gen) \/ 2014-2022\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ SX4 (MK1) \/ 2006-2013\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ SX4 S-Cross \/ 2013-2021\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Swift (MK5) \/ 2010-2017\u003c\/li\u003e\n\u003cli\u003eSuzuki \/ Vitara (MK4) \/ 2015-Present\u003c\/li\u003e\n\u003cli\u003eVolkswagen \/ Polo (5th Gen) \/ 2009-2017\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780138922296,"sku":"HR-8659-260","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201662413132313r13w23gq.jpg?v=1678899664"},{"product_id":"hardrace-adjustable-universal-drop-links-10mm-rod-ends-280-319mm","title":"Hardrace Adjustable Universal Drop Links 10mm Rod Ends 280-319mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 280-319mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 280-319mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 280-319mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW \/ 1-Series (1st Gen) \/ 2003-2013\u003c\/li\u003e\n\u003cli\u003eBMW \/ 1-Series (2nd Gen) \/ 2011-2019\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (5th Gen) \/ 2004-2013\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (6th Gen) \/ 2011-2019\u003c\/li\u003e\n\u003cli\u003eBMW \/ 4-Series (2nd Gen) \/ 2020-Present\u003c\/li\u003e\n\u003cli\u003eBMW \/ Z4 (2nd Gen) \/ 2009-2016\u003c\/li\u003e\n\u003cli\u003eFord \/ Kuga (2nd Gen) \/ 2012-2019\u003c\/li\u003e\n\u003cli\u003eFord \/ Mondeo (4th Gen) \/ 2007-2014\u003c\/li\u003e\n\u003cli\u003eHonda \/ Civic 5-Door Hatchback \/ 2022-Present\u003c\/li\u003e\n\u003cli\u003eHonda \/ Jazz (1st Gen) \/ 2002-2008\u003c\/li\u003e\n\u003cli\u003eHonda \/ Jazz (2nd Gen) \/ 2008-2015\u003c\/li\u003e\n\u003cli\u003eHonda \/ Jazz (3rd Gen) \/ 2015-2020\u003c\/li\u003e\n\u003cli\u003eHonda \/ Jazz (4th Gen) \/ 2020-Present\u003c\/li\u003e\n\u003cli\u003eMG \/ ZS \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eMINI \/ Mini (2nd Gen) \/ 2006-2016\u003c\/li\u003e\n\u003cli\u003eMazda \/ 3 (3rd Gen) \/ 2013-2018\u003c\/li\u003e\n\u003cli\u003eMazda \/ 5 (2nd Gen) \/ 2005-2010\u003c\/li\u003e\n\u003cli\u003eMazda \/ 6 (3rd Gen) \/ 2012-Present\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-5 (1st Gen) \/ 2012-2017\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-5 (2nd Gen) \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eMazda \/ CX-9 (2nd Gen) \/ 2016-Present\u003c\/li\u003e\n\u003cli\u003eMini \/ Countryman (3rd Gen) \/ 2023-Present\u003c\/li\u003e\n\u003cli\u003eMini \/ Mini (3rd Gen) \/ 2014-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ S60 (2nd Gen) \/ 2010-2018\u003c\/li\u003e\n\u003cli\u003eVolvo \/ S80 (2nd Gen) \/ 2006-2016\u003c\/li\u003e\n\u003cli\u003eVolvo \/ V60 (1st Gen) \/ 2010-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ V70 (3rd Gen) \/ 2007-2016\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC70 (2nd Gen) \/ 2007-2016\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Porsche 996\/997: For C4\/Turbo Front Side use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780138955064,"sku":"HR-8659-300","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20166241331113w31d1wn.jpg?v=1678899665"},{"product_id":"hardrace-adjustable-universal-drop-links-12mm-rod-ends-104-130mm","title":"Hardrace Adjustable Universal Drop Links 12mm Rod Ends 104-130mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 104-130mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 104-130mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 104-130mm\u003c\/li\u003e\n\u003cli\u003e12mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInfiniti \/ FX (2nd Gen) 2008-2013 \/ SUV (S51) 2008-2013 \/ FX30D 3.0 TD 2010-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ FX (2nd Gen) 2008-2013 \/ SUV (S51) 2008-2013 \/ FX37 3.7 2008-2013\u003c\/li\u003e\n\u003cli\u003eInfiniti \/ FX (2nd Gen) 2008-2013 \/ SUV (S51) 2008-2013 \/ FX50 5.0 2008-2013\u003c\/li\u003e\n\u003cli\u003eLexus \/ LS (1st Gen) 1989-1994 \/ Sedan (XF10) 1989-1994 \/ LS400 4.0 (UCF10) 1989-1992\u003c\/li\u003e\n\u003cli\u003eLexus \/ LS (1st Gen) 1989-1994 \/ Sedan (XF10) 1989-1994 \/ LS400 4.0 (UCF11) 1992-1994\u003c\/li\u003e\n\u003cli\u003eLexus \/ LS (2nd Gen) 1994-2000 \/ Sedan (XF20) 1994-2000 \/ LS400 4.0 (UCF20\/UCF21) 1994-2000\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (3rd Gen) 2008-2015 \/ SUV (AL10) 2008-2015 \/ RX270 2.7 (AGL10) 2008-2015\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (3rd Gen) 2008-2015 \/ SUV (AL10) 2008-2015 \/ RX350 3.5 (AWD) (GGL15) 2008-2012\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (3rd Gen) 2008-2015 \/ SUV (AL10) 2008-2015 \/ RX350 3.5 (GRL10) 2008-2012\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (3rd Gen) 2008-2015 \/ SUV (AL10) 2008-2015 \/ RX350 3.5 (GYL10) 2008-2015\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (3rd Gen) 2008-2015 \/ SUV (AL10) 2008-2015 \/ RX450h Hybrid 3.5 (AWD) (GYL15) 2008-2015\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (3rd Gen) 2008-2015 \/ SUV (AL10) 2008-2015 \/ RX450h Hybrid 3.5 (GYL10) 2008-2015\u003c\/li\u003e\n\u003cli\u003eFord \/ Kuga (3rd Gen) 2019-Present \/ SUV (CX482) 2019-Present \/ Kuga 1.5 Turbo 2019-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Kuga (3rd Gen) 2019-Present \/ SUV (CX482) 2019-Present \/ Kuga 2.0 Turbo 2019-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Kuga (3rd Gen) 2019-Present \/ SUV (CX482) 2019-Present \/ Kuga 2.0TD 2019-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Kuga (3rd Gen) 2019-Present \/ SUV (CX482) 2019-Present \/ Kuga 2.5 Hybrid 2019-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Kuga (3rd Gen) 2019-Present \/ SUV (CX482) 2019-Present \/ Kuga 2.5 PHEV 2019-Present\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (4th Gen) 2015-2023 \/ SUV (AL20) 2015-2023 \/ RX200t 2.0 Turbo (AGL20) 2015-2023\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (4th Gen) 2015-2023 \/ SUV (AL20) 2015-2023 \/ RX200t 2.0 Turbo (AWD) (AGL25) 2015-2023\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (4th Gen) 2015-2023 \/ SUV (AL20) 2015-2023 \/ RX350 3.5 (AWD) (GGL25) 2015-2023\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (4th Gen) 2015-2023 \/ SUV (AL20) 2015-2023 \/ RX450h Hybrid 3.5 (AWD) (GYL25) 2015-2023\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (4th Gen) 2015-2023 \/ SUV (AL20) 2015-2023 \/ RX450h Hybrid 3.5 (GYL20) 2015-2023\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139020600,"sku":"HR-8793-110","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201721616354516k35m45yu.jpg?v=1678899666"},{"product_id":"hardrace-adjustable-universal-drop-links-12mm-rod-ends-123-162mm","title":"Hardrace Adjustable Universal Drop Links 12mm Rod Ends 123-162mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 123-162mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 123-162mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 123-162mm\u003c\/li\u003e\n\u003cli\u003e12mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFord \/ Mustang (6th Gen) \/ Convertible (S550) \/ 2014-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Mustang (6th Gen) \/ Coupe (S550) \/ 2014-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ S60 (1st Gen) \/ Sedan (P24) \/ 2000-2009\u003c\/li\u003e\n\u003cli\u003eVolvo \/ S80 (1st Gen) \/ Sedan (TS) \/ 1998-2006\u003c\/li\u003e\n\u003cli\u003eVolvo \/ V70 (2nd Gen) \/ Wagon (Cross Country) \/ 2000-2007\u003c\/li\u003e\n\u003cli\u003eVolvo \/ V70 (2nd Gen) \/ Wagon (SW) \/ 2000-2007\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC70 (1st Gen) \/ Wagon \/ 2000-2007\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC90 (1st Gen) \/ SUV \/ 2002-2014\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Ace use (Rear).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139184440,"sku":"HR-8793-140","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/2017291348913z48b9jg.jpg?v=1678899668"},{"product_id":"hardrace-adjustable-universal-drop-links-12mm-rod-ends-163-202mm","title":"Hardrace Adjustable Universal Drop Links 12mm Rod Ends 163-202mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 163-202mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 163-202mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 163-202mm\u003c\/li\u003e\n\u003cli\u003e12mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW \/ 5-Series (6th Gen) \/ Gran Turismo (F07) \/ 2008-2017\u003c\/li\u003e\n\u003cli\u003eVolvo \/ S60 (3rd Gen) \/ Sedan \/ 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ S90 (2nd Gen) \/ Sedan \/ 2016-2025\u003c\/li\u003e\n\u003cli\u003eVolvo \/ V60 (2nd Gen) \/ Wagon \/ 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ V90 (2nd Gen) \/ Wagon \/ 2016-2025\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC60 (2nd Gen) \/ SUV \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC90 (2nd Gen) \/ SUV \/ 2014-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e BMW G30: For AWD use (Front).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-universal-adjustable-stabiliser-link-2pcs-range-90-110mm-12mm-stud-rod-end\"\u003eHardrace Universal Adjustable Stabiliser Link 2pcs Range 90-110mm 12mm Stud Rod End\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139217208,"sku":"HR-8793-180","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20172913484113l48d41tj.jpg?v=1678899668"},{"product_id":"hardrace-adjustable-universal-drop-links-12mm-rod-ends-203-242mm","title":"Hardrace Adjustable Universal Drop Links 12mm Rod Ends 203-242mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 203-242mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 203-242mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 203-242mm\u003c\/li\u003e\n\u003cli\u003e12mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW \/ 5-Series (7th Gen) \/ Sedan (G30) \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eBMW \/ 5-Series (7th Gen) \/ Touring (G31) \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eCadillac \/ ATS \/ Sedan \/ 2012-Present\u003c\/li\u003e\n\u003cli\u003eCadillac \/ CTS (3rd Gen) \/ Sedan \/ 2013-Present\u003c\/li\u003e\n\u003cli\u003eChevrolet \/ Camaro (6th Gen) \/ Coupe \/ 2015-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Mustang (6th Gen) \/ Convertible (S550) \/ 2014-Present\u003c\/li\u003e\n\u003cli\u003eFord \/ Mustang (6th Gen) \/ Coupe (S550) \/ 2014-Present\u003c\/li\u003e\n\u003cli\u003eSaab \/ 95 \/ 1999-2008\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e BMW G30: For RWD use (Front).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139249976,"sku":"HR-8793-220","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20172913491013n49k10fa.jpg?v=1678899669"},{"product_id":"hardrace-adjustable-universal-drop-links-12mm-rod-ends-243-282mm","title":"Hardrace Adjustable Universal Drop Links 12mm Rod Ends 243-282mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 243-282mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 243-282mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 243-282mm\u003c\/li\u003e\n\u003cli\u003e12mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLexus \/ ES (4th Gen) \/ Sedan (XV30) \/ 2001-2006\u003c\/li\u003e\n\u003cli\u003eLexus \/ GS (1st Gen) \/ Sedan (S140) \/ 1991-1997\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (2nd Gen) \/ SUV (XU30) \/ 2003-2009\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (3rd Gen) \/ SUV (AL10) \/ 2008-2015\u003c\/li\u003e\n\u003cli\u003eLexus \/ RX (4th Gen) \/ SUV (AL20) \/ 2015-2023\u003c\/li\u003e\n\u003cli\u003eMG \/ HS \/ SUV \/ 2019-Present\u003c\/li\u003e\n\u003cli\u003eNissan \/ Juke \/ SUV (F15) \/ 2010-Present\u003c\/li\u003e\n\u003cli\u003eTesla \/ Model 3 \/ Sedan (5YJ3) \/ 2017-Present\u003c\/li\u003e\n\u003cli\u003eTesla \/ Model Y \/ SUV \/ 2020-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Camry  (7th Gen) \/ Sedan (XV40) \/ 2007-2012\u003c\/li\u003e\n\u003cli\u003eToyota \/ Camry (6th Gen) \/ Sedan (XV30) \/ 2001-2006\u003c\/li\u003e\n\u003cli\u003eToyota \/ Camry (9th Gen) \/ Sedan (XV70) \/ 2017-2024\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (10th Gen) \/ Sedan (E150) \/ 2007-2013\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (11th Gen) \/ Sedan (E170) \/ 2013-Present\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) \/ Hatchback (E120) \/ 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) \/ Sedan (E120) \/ 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Corolla (9th Gen) \/ Wagon (E120) \/ 2002-2007\u003c\/li\u003e\n\u003cli\u003eToyota \/ Previa (2nd Gen) \/ MPV (XR30) \/ 2000-2006\u003c\/li\u003e\n\u003cli\u003eToyota \/ RAV4 (6th Gen) \/ SUV (XA60) \/ 2025-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-reinforced-front-drop-links-2pc-set-toyota-camry-xv30\"\u003eHardrace Reinforced Front Drop Links 2Pc Set Toyota Camry XV30 01-06\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-reinforced-rear-drop-links-2pc-set-toyota-camry-xv30\"\u003eHardrace Reinforced Rear Drop Links 2Pc Set Toyota Camry XV30 01-06\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-reinforced-20mm-shortened-front-stabilizer-links-2pc-set-toyota-camry-xv40-06-11\"\u003eHardrace Reinforced 20mm Shortened Front Stabilizer Links 2Pc Set Toyota Camry XV40 06-11\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139282744,"sku":"HR-8793-260","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20172913493213w49o32is.jpg?v=1678899669"},{"product_id":"hardrace-adjustable-universal-drop-links-12mm-rod-ends-283-322mm","title":"Hardrace Adjustable Universal Drop Links 12mm Rod Ends 283-322mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 283-322mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 283-322mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 283-322mm\u003c\/li\u003e\n\u003cli\u003e12mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi: A3 (2nd Gen) 2003-2013, A3 (3rd Gen) 2012-2020, Q3 2011-Present, TT (2nd Gen) 2006-2014\u003c\/li\u003e\n\u003cli\u003eBMW: 5-Series (6th Gen) 2008-2017, 7-Series (5th Gen) 2008-2015\u003c\/li\u003e\n\u003cli\u003eFord: Focus (4th Gen) 2018-Present, Kuga (3rd Gen) 2019-Present, Mondeo (5th Gen) 2014-Present\u003c\/li\u003e\n\u003cli\u003eHyundai: Elantra (4th Gen) 2006-2011, Elantra (5th Gen) 2011-2015, Veloster (2nd Gen) 2017-Present, i30 (3rd Gen) 2017-Present\u003c\/li\u003e\n\u003cli\u003eMercedes-Benz: C-Class (3rd Gen) 2007-2015, E-Class (4th Gen) 2009-2017\u003c\/li\u003e\n\u003cli\u003eNissan: Juke 2010-Present, Murano (1st Gen) 2002-2008\u003c\/li\u003e\n\u003cli\u003eSaab: 95 2008-2010\u003c\/li\u003e\n\u003cli\u003eSeat: Altea 2004-2015, Leon (2nd Gen) 2005-2012, Toledo (3rd Gen) 2004-2009\u003c\/li\u003e\n\u003cli\u003eSkoda: Karoq 2017-Present, Kodiaq (1st Gen) 2016-2023, Kodiaq (2nd Gen) 2023-Present, Octavia (3rd Gen) 2012-Present, Octavia (4th Gen) 2019-Present, Superb (3rd Gen) 2015-2023, Superb (4th Gen) 2023-Present\u003c\/li\u003e\n\u003cli\u003eSubaru: Forester (5th Gen) 2018-2023, XV (2nd Gen) 2018-2022\u003c\/li\u003e\n\u003cli\u003eTesla: Model 3 2017-Present, Model Y 2020-Present\u003c\/li\u003e\n\u003cli\u003eToyota: Auris (1st Gen) 2006-2012, Auris (2nd Gen) 2012-Present, Corolla (10th Gen) 2007-2013, Corolla (11th Gen) 2013-Present, Corolla (9th Gen) 2002-2007, Prius (2nd Gen) 2003-2009\u003c\/li\u003e\n\u003cli\u003eVolkswagen: Caddy (4th Gen) 2020-Present, Golf (5th Gen) 2003-2009, Golf (6th Gen) 2008-2016, Golf (7th Gen) 2012-2020, Jetta (5th Gen) 2005-2010, Jetta (6th Gen) 2010-2018, Passat (6th Gen) 2005-2010, Passat (7th Gen) 2010-2014, Passat (8th Gen) 2014-2023, Passat (9th Gen) 2023-Present, Scirocco (3rd Gen) 2008-2017, Sharan (2nd Gen) 2010-Present, Tiguan (1st Gen) 2007-2016, Tiguan (2nd Gen) 2016-2025, Tiguan (3rd Gen) 2023-Present, Touran (2nd Gen) 2015-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e FOR LOWERED PQ35\/PQ46\/MQB Models (Front).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139413816,"sku":"HR-8793-300","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/20172913494813r49d48py.jpg?v=1678899671"},{"product_id":"hardrace-adjustable-universal-drop-links-12mm-rod-ends-323-362mm","title":"Hardrace Adjustable Universal Drop Links 12mm Rod Ends 323-362mm","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 323-362mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 323-362mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 323-362mm\u003c\/li\u003e\n\u003cli\u003e12mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi: A3 (2nd Gen) 2003-2013, A3 (3rd Gen) 2012-2020, Q3 2011-Present, TT (2nd Gen) 2006-2014, TT (3rd Gen) 2014-Present\u003c\/li\u003e\n\u003cli\u003eHyundai: Santa Fe (2nd Gen) 2006-2012, Santa Fe (3rd Gen) 2012-2018\u003c\/li\u003e\n\u003cli\u003eInfiniti: Q30 (1st Gen) 2015-2019, QX30 2016-2019\u003c\/li\u003e\n\u003cli\u003eLexus: CT 2010-Present, NX 2014-Present, UX 2018-Present\u003c\/li\u003e\n\u003cli\u003eMercedes-Benz: A-Class (3rd Gen) 2012-2018, B-Class (2nd Gen) 2011-2019, CLA-Class (1st Gen) 2013-2019, GLA-Class (1st Gen) 2013-2020\u003c\/li\u003e\n\u003cli\u003eSaab: 9-3 (2nd Gen) 2004-2011, 9-3 (2nd Gen) 2004-2011 2003-2012\u003c\/li\u003e\n\u003cli\u003eSkoda: Karoq 2017-Present, Kodiaq (1st Gen) 2016-2023, Kodiaq (2nd Gen) 2023-Present, Octavia (3rd Gen) 2012-Present, Octavia (4th Gen) 2019-Present, Superb (3rd Gen) 2015-2023, Superb (4th Gen) 2023-Present\u003c\/li\u003e\n\u003cli\u003eToyota: C-HR (1st Gen) 2016-Present, Corolla (12th Gen) 2018-Present, Prius (3rd Gen) 2009-2016, Prius (4th Gen) 2016-2019, Prius (5th Gen) 2023-Present, RAV4 (3rd Gen) 2005-2013, RAV4 (4th Gen) 2013-2018, RAV4 (5th Gen) 2018-2025, Yaris (2nd Gen) 2005-2012\u003c\/li\u003e\n\u003cli\u003eVolkswagen: Caddy (4th Gen) 2020-Present, Golf (4th Gen) 1997-2006, Golf (5th Gen) 2003-2009, Golf (6th Gen) 2008-2016, Golf (7th Gen) 2012-2020, Jetta (5th Gen) 2005-2010, Jetta (6th Gen) 2010-2018, Passat (6th Gen) 2005-2010, Passat (7th Gen) 2010-2014, Passat (8th Gen) 2014-2023, Passat (9th Gen) 2023-Present, Scirocco (3rd Gen) 2008-2017, Sharan (2nd Gen) 2010-Present, Tiguan (1st Gen) 2007-2016, Tiguan (2nd Gen) 2016-2025, Tiguan (3rd Gen) 2023-Present, Touran (2nd Gen) 2015-Present\u003c\/li\u003e\n\u003cli\u003eVolvo: S60 (1st Gen) 2000-2009, S80 (1st Gen) 1998-2006, V70 (2nd Gen) 2000-2007, XC70 (1st Gen) 2000-2007\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e For PQ35\/PQ46\/MQB Models OE Replacement (Front).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139446584,"sku":"HR-8793-340","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/2017291350913s50l9lg.jpg?v=1678899672"},{"product_id":"hardrace-adjustable-universal-drop-links-12mm-rod-ends-90-degree-rotated-280-319mm","title":"Hardrace Adjustable Universal Drop Links 12mm Rod Ends 90 Degree Rotated 280-319mm","description":"\u003ch2\u003eHardrace Adjustable Universal Drop Links 12mm Rod Ends 90 Degree Rotated 280-319mm – Stronger Than The Factory Links\u003c\/h2\u003e\n\u003cp\u003eDrop links connect the anti-roll bar to the suspension, so any play in them delays the bar's response. This Hardrace drop link set is a stronger upgrade that keeps the anti-roll bar working instantly and precisely, for flatter, more controlled cornering.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStronger than the factory links\u003c\/li\u003e\n\u003cli\u003eQuicker anti-roll bar response\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eCheck the size and fitment against your car before ordering, or contact us if you are unsure.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely. Remove the factory part and fit the Hardrace part in its place, tightening all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height. Have the alignment checked after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139479352,"sku":"HR-7750-300","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201512992409u2d40ms_73b2e11f-4136-4014-8308-bbc1f75702a7.jpg?v=1678899673"},{"product_id":"hardrace-adjustable-universal-drop-links-10mm-rod-ends-320-359mm-honda-civic-type-r-fk8-17-21","title":"Hardrace Adjustable Universal Drop Links 10mm Rod Ends 320-359mm Honda","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 320-359mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 320-359mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 320-359mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop link\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo \/ XC90 (1st Gen) 2002-2014 \/ SUV 2002-2014 \/ XC90 2.5 Turbo 2002-2006\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC90 (1st Gen) 2002-2014 \/ SUV 2002-2014 \/ XC90 3.2 2006-2012\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC90 (1st Gen) 2002-2014 \/ SUV 2002-2014 \/ XC90 4.4 2005-2010\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC90 (1st Gen) 2002-2014 \/ SUV 2002-2014 \/ XC90 D3 2.4 TD 2010-2014\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC90 (1st Gen) 2002-2014 \/ SUV 2002-2014 \/ XC90 D4 2.4 TD 2010-2014\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC90 (1st Gen) 2002-2014 \/ SUV 2002-2014 \/ XC90 D5 2.4 TD 2002-2014\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC90 (1st Gen) 2002-2014 \/ SUV 2002-2014 \/ XC90 T6 2.9 Twin Turbo 2002-2006\u003c\/li\u003e\n\u003cli\u003eHonda \/ HR-V (3rd Gen) 2021-Present \/ SUV (RV) 2021-Present \/ HR-V 1.5 Hybrid 2021-Present\u003c\/li\u003e\n\u003cli\u003eHonda \/ Civic 5-Door Hatchback \/ 2022-Present \/ 2.0 Type-R (FL5)\u003c\/li\u003e\n\u003cli\u003eHonda \/ ZR-V 2023-Present \/ SUV 2023-Present \/ ZR-V Hybrid 2.0 Turbo 2023-Present\u003c\/li\u003e\n\u003cli\u003eMini \/ Countryman (3rd Gen) 2023-Present \/ SUV (U25) 2023-Present \/ Countryman 1.5 Turbo 2023-Present\u003c\/li\u003e\n\u003cli\u003eMini \/ Countryman (3rd Gen) 2023-Present \/ SUV (U25) 2023-Present \/ Countryman D 2.0 TD 2024-Present\u003c\/li\u003e\n\u003cli\u003eMini \/ Countryman (3rd Gen) 2023-Present \/ SUV (U25) 2023-Present \/ Countryman S 2.0 Turbo (4WD) 2023-Present\u003c\/li\u003e\n\u003cli\u003eMini \/ Countryman (3rd Gen) 2023-Present \/ SUV (U25) 2023-Present \/ Countrymen Electric 2024-Present\u003c\/li\u003e\n\u003cli\u003eMini \/ Countryman (3rd Gen) 2023-Present \/ SUV (U25) 2023-Present \/ Countrymen Electric SE (4WD) 2024-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139512120,"sku":"HR-8659-340","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201662413314813l31i48ha.jpg?v=1678899673"},{"product_id":"hardrace-adjustable-universal-stabilizers-links-10mm-rod-ends-2pc-set","title":"Hardrace Adjustable Universal Stabilisers Links 10mm Rod Ends","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 90-99mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 90-99mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 90-99mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop link\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSee title\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139544888,"sku":"HR-6405","price":106.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/2016112215404815m40k48su.jpg?v=1678899675"},{"product_id":"hardrace-universal-adjustable-drop-link-set-range-81-91mm-10mm-stud-rod-end","title":"Hardrace Universal Adjustable Drop Link Set Range 81-91mm 10mm Stud Rod End","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 81-91mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 81-91mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 81-91mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNissan \/ Murano (1st Gen) 2002-2008 \/ SUV (Z50) 2002-2008 \/ Murano 3.5 2002-2006\u003c\/li\u003e\n\u003cli\u003eNissan \/ Murano (1st Gen) 2002-2008 \/ SUV (Z50) 2002-2008 \/ Murano 3.5 2006-2008\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139610424,"sku":"HR-6853-080","price":106.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hard-race-drops_18.jpg?v=1678899675"},{"product_id":"hardrace-universal-adjustable-stabilizer-link-2pcs-set-range-220-259mm-10mm-stud-rod-end","title":"Hardrace Universal Adjustable Stabiliser Link 220-259mm 10mm Stud Rod End","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 220-259mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 220-259mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 220-259mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW \/ 3-Series (2nd Gen) \/ Convertible (E30) \/ 1982-1994\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (2nd Gen) \/ Sedan (E30) \/ 1982-1994\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (3rd Gen) \/ Compact (E36) \/ 1990-2000\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (3rd Gen) \/ Convertible (E36) \/ 1990-2000\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (3rd Gen) \/ Coupe (E36) \/ 1990-2000\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (3rd Gen) \/ Sedan (E36) \/ 1990-2000\u003c\/li\u003e\n\u003cli\u003eBMW \/ 3-Series (3rd Gen) \/ Touring (E36) \/ 1990-2000\u003c\/li\u003e\n\u003cli\u003eBMW \/ 5-Series (2nd Gen) \/ Sedan (E28) \/ 1980-1987\u003c\/li\u003e\n\u003cli\u003eBMW \/ 5-Series (3rd Gen) \/ Sedan (E34) \/ 1986-1997\u003c\/li\u003e\n\u003cli\u003eBMW \/ 5-Series (3rd Gen) \/ Touring (E34) \/ 1987-1997\u003c\/li\u003e\n\u003cli\u003eBMW \/ 7-Series (2nd Gen) \/ Sedan (E32) \/ 1986-1994\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e E30: For M3 use only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-universal-drop-links-bushes-10mm-id-4pc-set\"\u003eHardrace Universal Drop Links Bushes 10mm ID 4Pc Set\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139675960,"sku":"HR-8659-240","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/8659-240_main.jpg?v=1678899676"},{"product_id":"hardrace-universal-adjustable-drop-link-set-range-90-99mm-10mm-stud-rod-end","title":"Hardrace Universal Adjustable Drop Link Set Range 90-99mm 10mm Stud Rod End","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 90-99mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 90-99mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 90-99mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop link\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSee title\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780139708728,"sku":"HR-6853-090","price":106.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hard-race-drops_16.jpg?v=1678899677"},{"product_id":"hardrace-universal-adjustable-stabilizer-link-range-320-359mm-10mm-stud-rod-end-2pcs-set","title":"Hardrace Universal Adjustable Stabiliser Link Range:320-359mm 10mm Stud","description":"\u003ch2\u003eHardrace Universal Adjustable Drop Link 320-359mm – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eA universal adjustable drop link lets you set the anti-roll bar at the right angle on lowered cars, motorsport builds and custom set-ups, with no pre-load on the bar. This Hardrace link adjusts in length across a 320-359mm range, so you can match it to your car exactly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable design\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load\u003c\/li\u003e\n\u003cli\u003eIdeal for lowered and motorsport cars\u003c\/li\u003e\n\u003cli\u003eAdjustment range: 320-359mm\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal adjustable drop link\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSee title\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal part. Measure your current drop link between the mounting centres and check it falls within the adjustment range, and check the stud size, before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780140560696,"sku":"HR-8863-340","price":133.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/8863-340_main.jpg?v=1678899678"},{"product_id":"hardrace-adjustable-10mm-camber-bolts-2-to-2-degree-range","title":"Hardrace Adjustable 10mm Camber Bolts -2 To +2 Degree Range","description":"\u003ch2\u003eHardrace Adjustable Camber Bolts 10mm – Adjustable Camber\u003c\/h2\u003e\n\u003cp\u003eMany cars have no factory camber adjustment on the strut. These Hardrace adjustable camber bolts fit in place of the strut-to-hub bolts and let you adjust camber, so you can dial in the alignment after lowering for even tyre wear and more grip.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdds camber adjustment at the strut\u003c\/li\u003e\n\u003cli\u003eEven tyre wear and more grip after lowering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable camber bolts 10mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eUniversal. Suits struts that use 10mm strut-to-hub bolts. Measure your bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, remove the wheel and swap one of the strut-to-hub bolts at a time for a Hardrace camber bolt. Set the camber, tighten to the vehicle manufacturer's torque figures and have a full alignment done. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eHow much camber do they add?\u003c\/h3\u003e\n\u003cp\u003eThe amount depends on the car. Have a full alignment done after fitting to set the camber you want.\u003c\/p\u003e\n\u003ch3\u003eWill they fit my car?\u003c\/h3\u003e\n\u003cp\u003eCheck the bolt size against your strut-to-hub bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141117752,"sku":"HR-6700","price":53.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/6700.jpg?v=1678899679"},{"product_id":"hardrace-adjustable-12mm-camber-bolts-2-to-2-degree-range","title":"Hardrace Adjustable 12mm Camber Bolts -2 To +2 Degree Range","description":"\u003ch2\u003eHardrace Adjustable Camber Bolts 12mm – Adjustable Camber\u003c\/h2\u003e\n\u003cp\u003eMany cars have no factory camber adjustment on the strut. These Hardrace adjustable camber bolts fit in place of the strut-to-hub bolts and let you adjust camber, so you can dial in the alignment after lowering for even tyre wear and more grip.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdds camber adjustment at the strut\u003c\/li\u003e\n\u003cli\u003eEven tyre wear and more grip after lowering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable camber bolts 12mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eUniversal. Suits struts that use 12mm strut-to-hub bolts. Measure your bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, remove the wheel and swap one of the strut-to-hub bolts at a time for a Hardrace camber bolt. Set the camber, tighten to the vehicle manufacturer's torque figures and have a full alignment done. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-14mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 14mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-15mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 15mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-16mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 16mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow much camber do they add?\u003c\/h3\u003e\n\u003cp\u003eThe amount depends on the car. Have a full alignment done after fitting to set the camber you want.\u003c\/p\u003e\n\u003ch3\u003eWill they fit my car?\u003c\/h3\u003e\n\u003cp\u003eCheck the bolt size against your strut-to-hub bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141150520,"sku":"HR-6701","price":53.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/6701.jpg?v=1678899680"},{"product_id":"hardrace-adjustable-14mm-camber-bolts-2-to-2-degree-range","title":"Hardrace Adjustable 14mm Camber Bolts -2 To +2 Degree Range","description":"\u003ch2\u003eHardrace Adjustable Camber Bolts 14mm – Adjustable Camber\u003c\/h2\u003e\n\u003cp\u003eMany cars have no factory camber adjustment on the strut. These Hardrace adjustable camber bolts fit in place of the strut-to-hub bolts and let you adjust camber, so you can dial in the alignment after lowering for even tyre wear and more grip.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdds camber adjustment at the strut\u003c\/li\u003e\n\u003cli\u003eEven tyre wear and more grip after lowering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable camber bolts 14mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eUniversal. Suits struts that use 14mm strut-to-hub bolts. Measure your bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, remove the wheel and swap one of the strut-to-hub bolts at a time for a Hardrace camber bolt. Set the camber, tighten to the vehicle manufacturer's torque figures and have a full alignment done. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-12mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 12mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-15mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 15mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-16mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 16mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow much camber do they add?\u003c\/h3\u003e\n\u003cp\u003eThe amount depends on the car. Have a full alignment done after fitting to set the camber you want.\u003c\/p\u003e\n\u003ch3\u003eWill they fit my car?\u003c\/h3\u003e\n\u003cp\u003eCheck the bolt size against your strut-to-hub bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141183288,"sku":"HR-6702","price":53.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/6700_1.jpg?v=1678899680"},{"product_id":"hardrace-adjustable-15mm-camber-bolts-2-to-2-degree-range","title":"Hardrace Adjustable 15mm Camber Bolts -2 To +2 Degree Range","description":"\u003ch2\u003eHardrace Adjustable Camber Bolts 15mm – Adjustable Camber\u003c\/h2\u003e\n\u003cp\u003eMany cars have no factory camber adjustment on the strut. These Hardrace adjustable camber bolts fit in place of the strut-to-hub bolts and let you adjust camber, so you can dial in the alignment after lowering for even tyre wear and more grip.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdds camber adjustment at the strut\u003c\/li\u003e\n\u003cli\u003eEven tyre wear and more grip after lowering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable camber bolts 15mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eUniversal. Suits struts that use 15mm strut-to-hub bolts. Measure your bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, remove the wheel and swap one of the strut-to-hub bolts at a time for a Hardrace camber bolt. Set the camber, tighten to the vehicle manufacturer's torque figures and have a full alignment done. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-12mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 12mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-14mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 14mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-16mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 16mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow much camber do they add?\u003c\/h3\u003e\n\u003cp\u003eThe amount depends on the car. Have a full alignment done after fitting to set the camber you want.\u003c\/p\u003e\n\u003ch3\u003eWill they fit my car?\u003c\/h3\u003e\n\u003cp\u003eCheck the bolt size against your strut-to-hub bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141216056,"sku":"HR-6703","price":53.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/6700_2.jpg?v=1678899681"},{"product_id":"hardrace-adjustable-16mm-camber-bolts-2-to-2-degree-range","title":"Hardrace Adjustable 16mm Camber Bolts -2 To +2 Degree Range","description":"\u003ch2\u003eHardrace Adjustable Camber Bolts 16mm – Adjustable Camber\u003c\/h2\u003e\n\u003cp\u003eMany cars have no factory camber adjustment on the strut. These Hardrace adjustable camber bolts fit in place of the strut-to-hub bolts and let you adjust camber, so you can dial in the alignment after lowering for even tyre wear and more grip.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdds camber adjustment at the strut\u003c\/li\u003e\n\u003cli\u003eEven tyre wear and more grip after lowering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable camber bolts 16mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eUniversal. Suits struts that use 16mm strut-to-hub bolts. Measure your bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, remove the wheel and swap one of the strut-to-hub bolts at a time for a Hardrace camber bolt. Set the camber, tighten to the vehicle manufacturer's torque figures and have a full alignment done. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-12mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 12mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-14mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 14mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-15mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 15mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow much camber do they add?\u003c\/h3\u003e\n\u003cp\u003eThe amount depends on the car. Have a full alignment done after fitting to set the camber you want.\u003c\/p\u003e\n\u003ch3\u003eWill they fit my car?\u003c\/h3\u003e\n\u003cp\u003eCheck the bolt size against your strut-to-hub bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141248824,"sku":"HR-6704","price":53.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/6701_1.jpg?v=1678899683"},{"product_id":"hardrace-adjustable-17mm-camber-bolts-2-to-2-degree-range","title":"Hardrace Adjustable 17mm Camber Bolts -2 To +2 Degree Range","description":"\u003ch2\u003eHardrace Adjustable Camber Bolts 17mm – Adjustable Camber\u003c\/h2\u003e\n\u003cp\u003eMany cars have no factory camber adjustment on the strut. These Hardrace adjustable camber bolts fit in place of the strut-to-hub bolts and let you adjust camber, so you can dial in the alignment after lowering for even tyre wear and more grip.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdds camber adjustment at the strut\u003c\/li\u003e\n\u003cli\u003eEven tyre wear and more grip after lowering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable camber bolts 17mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eUniversal. Suits struts that use 17mm strut-to-hub bolts. Measure your bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, remove the wheel and swap one of the strut-to-hub bolts at a time for a Hardrace camber bolt. Set the camber, tighten to the vehicle manufacturer's torque figures and have a full alignment done. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-12mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 12mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-14mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 14mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-adjustable-15mm-camber-bolts-2-to-2-degree-range\"\u003eHardrace Adjustable 15mm Camber Bolts -2 To +2 Degree Range\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow much camber do they add?\u003c\/h3\u003e\n\u003cp\u003eThe amount depends on the car. Have a full alignment done after fitting to set the camber you want.\u003c\/p\u003e\n\u003ch3\u003eWill they fit my car?\u003c\/h3\u003e\n\u003cp\u003eCheck the bolt size against your strut-to-hub bolts before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141281592,"sku":"HR-6705","price":53.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/6700_3.jpg?v=1678899683"},{"product_id":"hardrace-rear-camber-toe-adjustable-spacer-red-camber-1-5-1-5-toe-1-5-1-5-2pcs-set","title":"Hardrace Rear Camber\/Toe Adjustable Spacer Red Camber\/Toe -1.5 -1.5 2Pcs","description":"\u003ch2\u003eHardrace Rear Camber\/Toe Adjustable Spacer Red Camber\/Toe -1.5 -1.5 – Corrects Rear Camber And Toe\u003c\/h2\u003e\n\u003cp\u003eLowering a car changes the rear alignment, often with no factory adjustment to correct it. This Hardrace adjusting spacer set corrects the camber and toe, for better tyre wear and more grip.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCorrects rear camber and toe\u003c\/li\u003e\n\u003cli\u003eBetter tyre wear and more grip\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eCheck the size and fitment against your car before ordering, or contact us if you are unsure.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely. Remove the factory part and fit the Hardrace part in its place, tightening all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height. Have the alignment checked after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141314360,"sku":"HR-6780","price":58.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hardrace-placeholder_6ed62565-b2f7-465c-b239-3d9155278135.jpg?v=1678899683"},{"product_id":"hardrace-rear-camber-toe-adjustable-spacer-blue-camber-1-5-1-5-toe-1-5-1-5-2pcs-set","title":"Hardrace Rear Camber\/Toe Adjustable Spacer Blue Camber\/Toe -1.5 -1.5 2Pcs","description":"\u003ch2\u003eHardrace Rear Camber\/Toe Adjustable Spacer Blue Camber\/Toe -1.5 -1.5 – Corrects Rear Camber And Toe\u003c\/h2\u003e\n\u003cp\u003eLowering a car changes the rear alignment, often with no factory adjustment to correct it. This Hardrace adjusting spacer set corrects the camber and toe, for better tyre wear and more grip.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCorrects rear camber and toe\u003c\/li\u003e\n\u003cli\u003eBetter tyre wear and more grip\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eCheck the size and fitment against your car before ordering, or contact us if you are unsure.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely. Remove the factory part and fit the Hardrace part in its place, tightening all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height. Have the alignment checked after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141379896,"sku":"HR-7485","price":48.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hardrace-placeholder_f89ffe91-cd0a-44f7-9d20-d02f44a769de.jpg?v=1678899685"},{"product_id":"hardrace-rear-camber-toe-adjustable-spacer-grey-camber-1-5-1-5-toe-1-5-1-5-2pcs-set","title":"Hardrace Rear Camber\/Toe Adjustable Spacer Grey Camber:-1.5 ~ -1.5\/Toe:-1.5 ~ -1.5 2Pcs","description":"\u003ch2\u003eHardrace Rear Camber\/Toe Adjustable Spacer Grey Camber:-1.5 ~ -1.5\/Toe:-1.5 ~ -1.5 – Corrects Rear Camber And Toe\u003c\/h2\u003e\n\u003cp\u003eLowering a car changes the rear alignment, often with no factory adjustment to correct it. This Hardrace adjusting spacer set corrects the camber and toe, for better tyre wear and more grip.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCorrects rear camber and toe\u003c\/li\u003e\n\u003cli\u003eBetter tyre wear and more grip\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eCheck the size and fitment against your car before ordering, or contact us if you are unsure.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely. Remove the factory part and fit the Hardrace part in its place, tightening all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height. Have the alignment checked after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141609272,"sku":"HR-7486","price":48.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hardrace-placeholder_1fd92285-ca9a-4e8b-b6ce-ef3b1fdd9687.jpg?v=1678899686"},{"product_id":"hardrace-rear-camber-toe-adjustable-spacer-yellow-camber-1-5-1-5-toe-1-5-1-5-2pcs-set","title":"Hardrace Rear Camber\/Toe Adjustable Spacer Yellow Camber:-1.5 ~ -1.5\/Toe:-1.5 ~ -1.5 2Pcs","description":"\u003ch2\u003eHardrace Rear Camber\/Toe Adjustable Spacer Yellow Camber:-1.5 ~ -1.5\/Toe:-1.5 ~ -1.5 – Corrects Rear Camber And Toe\u003c\/h2\u003e\n\u003cp\u003eLowering a car changes the rear alignment, often with no factory adjustment to correct it. This Hardrace adjusting spacer set corrects the camber and toe, for better tyre wear and more grip.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCorrects rear camber and toe\u003c\/li\u003e\n\u003cli\u003eBetter tyre wear and more grip\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eCheck the size and fitment against your car before ordering, or contact us if you are unsure.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely. Remove the factory part and fit the Hardrace part in its place, tightening all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height. Have the alignment checked after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141642040,"sku":"HR-7487","price":48.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hardrace-placeholder_0a1bba97-88d5-4f3d-8da3-c7b3e67cac32.jpg?v=1678899686"},{"product_id":"hardrace-19mm-stabilizer-locking-ring","title":"Hardrace 19mm Stabilizer Locking Ring","description":"\u003ch2\u003eHardrace Stabiliser Locking Ring – Stops the anti-roll bar sliding sideways\u003c\/h2\u003e\n\u003cp\u003eThese Hardrace anti-roll bar locking rings clamp onto the bar either side of its bushes, stopping the bar sliding sideways so it stays centred and works consistently.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStops the anti-roll bar sliding sideways\u003c\/li\u003e\n\u003cli\u003eUniversal design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStabiliser locking ring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eUniversal. Check the size against your car before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the vehicle safely. Remove the factory part where fitted and install the Hardrace part, tightening all fixings to the vehicle manufacturer's torque figures. Have the alignment checked after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-universal-drop-links-bushes-10mm-id-4pc-set\"\u003eHardrace Universal Drop Links Bushes 10mm ID 4Pc Set\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-25-4mm-stabilizer-locking-ring\"\u003eHardrace 25.4mm Stabilizer Locking Ring\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-28mm-stabilizer-locking-ring\"\u003eHardrace 28mm Stabilizer Locking Ring\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141674808,"sku":"HR-8959-19","price":30.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201783011395811r39n58fb.jpg?v=1678899687"},{"product_id":"hardrace-25-4mm-stabilizer-locking-ring","title":"Hardrace 25.4mm Stabilizer Locking Ring","description":"\u003ch2\u003eHardrace Stabiliser Locking Ring – Stops the anti-roll bar sliding sideways\u003c\/h2\u003e\n\u003cp\u003eThese Hardrace anti-roll bar locking rings clamp onto the bar either side of its bushes, stopping the bar sliding sideways so it stays centred and works consistently.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStops the anti-roll bar sliding sideways\u003c\/li\u003e\n\u003cli\u003eUniversal design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStabiliser locking ring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eUniversal. Check the size against your car before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the vehicle safely. Remove the factory part where fitted and install the Hardrace part, tightening all fixings to the vehicle manufacturer's torque figures. Have the alignment checked after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-universal-drop-links-bushes-10mm-id-4pc-set\"\u003eHardrace Universal Drop Links Bushes 10mm ID 4Pc Set\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-19mm-stabilizer-locking-ring\"\u003eHardrace 19mm Stabilizer Locking Ring\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-28mm-stabilizer-locking-ring\"\u003eHardrace 28mm Stabilizer Locking Ring\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141740344,"sku":"HR-8959-25.4","price":30.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201791110394410d39w44xt.jpg?v=1678899690"},{"product_id":"hardrace-28mm-stabilizer-locking-ring","title":"Hardrace 28mm Stabilizer Locking Ring","description":"\u003ch2\u003eHardrace Stabiliser Locking Ring – Stops the anti-roll bar sliding sideways\u003c\/h2\u003e\n\u003cp\u003eThese Hardrace anti-roll bar locking rings clamp onto the bar either side of its bushes, stopping the bar sliding sideways so it stays centred and works consistently.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStops the anti-roll bar sliding sideways\u003c\/li\u003e\n\u003cli\u003eUniversal design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStabiliser locking ring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eUniversal. Check the size against your car before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the vehicle safely. Remove the factory part where fitted and install the Hardrace part, tightening all fixings to the vehicle manufacturer's torque figures. Have the alignment checked after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-universal-drop-links-bushes-10mm-id-4pc-set\"\u003eHardrace Universal Drop Links Bushes 10mm ID 4Pc Set\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-19mm-stabilizer-locking-ring\"\u003eHardrace 19mm Stabilizer Locking Ring\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-25-4mm-stabilizer-locking-ring\"\u003eHardrace 25.4mm Stabilizer Locking Ring\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141773112,"sku":"HR-8959-28","price":30.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201791110422010c42j20gf.jpg?v=1678899690"},{"product_id":"hardrace-30mm-stabilizer-locking-ring","title":"Hardrace 30mm Stabilizer Locking Ring","description":"\u003ch2\u003eHardrace Stabiliser Locking Ring – Stops the anti-roll bar sliding sideways\u003c\/h2\u003e\n\u003cp\u003eThese Hardrace anti-roll bar locking rings clamp onto the bar either side of its bushes, stopping the bar sliding sideways so it stays centred and works consistently.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStops the anti-roll bar sliding sideways\u003c\/li\u003e\n\u003cli\u003eUniversal design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStabiliser locking ring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eUniversal. Check the size against your car before ordering.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the vehicle safely. Remove the factory part where fitted and install the Hardrace part, tightening all fixings to the vehicle manufacturer's torque figures. Have the alignment checked after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-universal-drop-links-bushes-10mm-id-4pc-set\"\u003eHardrace Universal Drop Links Bushes 10mm ID 4Pc Set\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-19mm-stabilizer-locking-ring\"\u003eHardrace 19mm Stabilizer Locking Ring\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-25-4mm-stabilizer-locking-ring\"\u003eHardrace 25.4mm Stabilizer Locking Ring\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141805880,"sku":"HR-8959-30","price":30.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/201791815525415q52w54rc.jpg?v=1678899690"},{"product_id":"hardrace-universal-drop-links-bushes-8mm-id-4pc-set","title":"Hardrace Universal Drop Links Bushes 8mm ID 4Pc Set","description":"\u003ch2\u003eHardrace Universal Drop Link Bushes – Less Play, Quicker Response\u003c\/h2\u003e\n\u003cp\u003eThese Hardrace universal drop link bushes are a firmer upgrade for bush-type drop links, sized for a 8mm rod. They cut play in the link so the anti-roll bar responds more quickly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer than standard drop link bushes\u003c\/li\u003e\n\u003cli\u003eCuts play in the link\u003c\/li\u003e\n\u003cli\u003e8mm ball stud\u003c\/li\u003e\n\u003cli\u003eSuits a 8mm rod\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal drop link bushes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e*universal Stabilizer related ACCESSORIES\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eRemove the drop link, fit the Hardrace bushes in place of the standard ones and refit the link, tightening to the correct torque with the car on its wheels. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141838648,"sku":"HR-6163","price":17.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hardrace-placeholder_4d70561e-8446-46dc-9a6a-7897ebc2de4e.jpg?v=1678899691"},{"product_id":"hardrace-universal-drop-links-bushes-10mm-id-4pc-set","title":"Hardrace Universal Drop Links Bushes 10mm ID","description":"\u003ch2\u003eHardrace Universal Drop Link Bushes – Less Play, Quicker Response\u003c\/h2\u003e\n\u003cp\u003eThese Hardrace universal drop link bushes are a firmer upgrade for bush-type drop links, sized for a 10mm rod. They cut play in the link so the anti-roll bar responds more quickly.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFirmer than standard drop link bushes\u003c\/li\u003e\n\u003cli\u003eCuts play in the link\u003c\/li\u003e\n\u003cli\u003e10mm ball stud\u003c\/li\u003e\n\u003cli\u003eSuits a 10mm rod\u003c\/li\u003e\n\u003cli\u003e4-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal drop link bushes (4 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e*universal Stabilizer related ACCESSORIES\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eRemove the drop link, fit the Hardrace bushes in place of the standard ones and refit the link, tightening to the correct torque with the car on its wheels. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141904184,"sku":"HR-6162","price":17.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/6162.jpg?v=1678899693"},{"product_id":"hardrace-sway-bar-bracket-center-to-center-77mm","title":"Hardrace Sway Bar Bracket Centre To Centre 77mm","description":"\u003ch2\u003eHardrace Sway Bar Bracket Centre To Centre 77mm – Uprated Hardrace Upgrade\u003c\/h2\u003e\n\u003cp\u003eThe body flexes under hard cornering, which blurs steering feel and lets the suspension geometry change. This Hardrace brace ties key mounting points together to stiffen the chassis.\u003c\/p\u003e\n\u003cp\u003eIt suits the Sway Bar Bracket Centre To Centre 77mm.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStiffens the chassis\u003c\/li\u003e\n\u003cli\u003eSharper steering response\u003c\/li\u003e\n\u003cli\u003eReduces body flex under load\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003eSuitable for road and track use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChassis brace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSee title\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eBolt the brace to the factory mounting points. Tighten all fixings to the vehicle manufacturer's torque figures with the suspension loaded at normal ride height. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need to drill anything?\u003c\/h3\u003e\n\u003cp\u003eNo, it bolts to the factory mounting points.\u003c\/p\u003e\n\u003ch3\u003eWill it reduce ground clearance?\u003c\/h3\u003e\n\u003cp\u003eUnderbody braces sit close to the existing subframe, but check clearance on heavily lowered cars.\u003c\/p\u003e\n\u003ch3\u003eWill I notice the difference?\u003c\/h3\u003e\n\u003cp\u003eMost owners notice sharper, more immediate steering, especially through quick direction changes.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780141936952,"sku":"HR-7743","price":9.36,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/7743_main.jpg?v=1679390173"},{"product_id":"hardrace-volvo-xc40-18-lynk-co-01-17-rear-camber-kit-hardened-rubber-2pcs-set","title":"Hardrace Rear Camber Kit Hardened Rubber Volvo Xc40 18+ Lynk\u0026Co 01 17+","description":"\u003ch2\u003eHardrace Rear Camber Kit Hardened Rubber for Volvo XC40 T2\/T3\/D3 (2018-Present) and Lynk \u0026amp; Co 01 CX11 (2017-Present) – Adjustable Camber, More Grip\u003c\/h2\u003e\n\u003cp\u003eLowering a car pulls in negative camber that the factory arms can't correct, which wears the inner edge of the tyres and costs grip. This Hardrace rear camber kit is an upgrade over the factory arms. It lets you set camber exactly where you want it, so the tyres wear evenly and grip better.\u003c\/p\u003e\n\u003cp\u003eThey use hardened rubber bushes, a high-strength, anti-crack compound that is firmer than the factory bushes but still absorbs vibration.\u003c\/p\u003e\n\u003cp\u003eIt suits the Volvo XC40 2018-Present and Lynk \u0026amp;amp Co 01 2017-Present.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable camber\u003c\/li\u003e\n\u003cli\u003eCorrects camber after lowering for even tyre wear\u003c\/li\u003e\n\u003cli\u003eHardened rubber bushes for firm, quiet control\u003c\/li\u003e\n\u003cli\u003eHigh-strength steel construction\u003c\/li\u003e\n\u003cli\u003eSupplied complete with bushes or joints fitted, so no press is needed\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear camber kit lynk \u0026amp; co 01, (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 1.5 T2 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 1.5 T3 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 2.0 D3 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 2.0 D3 AWD 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 2.0 D4 AWD 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 2.0 T4 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 2.0 T4 AWD 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 2.0 T5 AWD 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 D4 Polestar 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 D4 Polestar AWD 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 T5 AWD 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 T5 Hybrid 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 T5 Polestar AWD 2018-Present\u003c\/li\u003e\n\u003cli\u003eLynk \u0026amp; Co \/ 01 2017-Present \/ SUV (CX11) 2017-Present \/ 01 1.5 Hybrid 2017-Present\u003c\/li\u003e\n\u003cli\u003eLynk \u0026amp; Co \/ 01 2017-Present \/ SUV (CX11) 2017-Present \/ 01 2.0 Turbo 2017-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Not For Full Electric Models Use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on axle stands or a ramp. Remove the factory arm and bolt the Hardrace arm in its place; it comes complete with its bushes or joints fitted, so no press is needed. Set adjustable arms to the same length as the factory parts to start. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-volvo-xc40-18-lynk-co-01-17-rear-toe-kit-hardened-rubber-2pcs-set\"\u003eHardrace Rear Toe Kit Hardened Rubber 2Pcs Volvo Xc40 18+ Lynk\u0026amp;Co 01 17+\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes. Have a full four-wheel alignment done after fitting, and use it to set the adjustable arms to the settings you want.\u003c\/p\u003e\n\u003ch3\u003eDoes it come with the bushes fitted?\u003c\/h3\u003e\n\u003cp\u003eYes. The arm comes complete with its bushes or joints already fitted, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eOnly slightly. The hardened rubber is firmer than the factory bushes but still absorbs vibration, so it stays comfortable for everyday driving.\u003c\/p\u003e\n\u003ch3\u003eHow much camber should I run?\u003c\/h3\u003e\n\u003cp\u003eFor road use, stay close to the manufacturer's figures or slightly more negative. Track cars often run more, but this increases inner tyre wear on the road.\u003c\/p\u003e\n\u003ch3\u003eDo I need it on a standard-height car?\u003c\/h3\u003e\n\u003cp\u003eIt is most useful on lowered cars, where it brings the geometry back into spec. On a standard car it still gives firmer location and finer adjustment than the factory parts.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. Not For Electric Models Use.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780147638584,"sku":"HR-Q0685","price":279.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0685_main.jpg?v=1678899752"},{"product_id":"hardrace-volvo-xc40-18-lynk-co-01-17-rear-toe-kit-hardened-rubber-2pcs-set","title":"Hardrace Rear Toe Kit Hardened Rubber Volvo Xc40 18+ Lynk\u0026Co 01 17+","description":"\u003ch2\u003eHardrace Rear Toe Kit Hardened Rubber for Volvo XC40 T2\/T3\/D3 (2018-Present) and Lynk \u0026amp; Co 01 CX11 (2017-Present) – Adjustable Toe, Firmer Location\u003c\/h2\u003e\n\u003cp\u003eToe has a big effect on stability and tyre wear, and lowering a car often pulls it out of spec with no factory adjustment to bring it back. This Hardrace rear toe kit is an upgrade over the factory arms. It gives you precise toe adjustment so you can bring the rear alignment back where it should be.\u003c\/p\u003e\n\u003cp\u003eThey use hardened rubber bushes, a high-strength, anti-crack compound that is firmer than the factory bushes but still absorbs vibration.\u003c\/p\u003e\n\u003cp\u003eIt suits the Volvo XC40 2018-Present and Lynk \u0026amp;amp Co 01 2017-Present.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable rear toe\u003c\/li\u003e\n\u003cli\u003eBrings toe back into spec on lowered cars\u003c\/li\u003e\n\u003cli\u003eHardened rubber bushes for firm, quiet control\u003c\/li\u003e\n\u003cli\u003eHigh-strength steel construction\u003c\/li\u003e\n\u003cli\u003eSupplied complete with bushes or joints fitted, so no press is needed\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear toe kit lynk \u0026amp; co 01, (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 1.5 T2 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 1.5 T3 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 2.0 D3 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 2.0 D3 AWD 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 2.0 D4 AWD 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 2.0 T4 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 2.0 T4 AWD 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 2.0 T5 AWD 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 D4 Polestar 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 D4 Polestar AWD 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 T5 AWD 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 T5 Hybrid 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 T5 Polestar AWD 2018-Present\u003c\/li\u003e\n\u003cli\u003eLynk \u0026amp; Co \/ 01 2017-Present \/ SUV (CX11) 2017-Present \/ 01 1.5 Hybrid 2017-Present\u003c\/li\u003e\n\u003cli\u003eLynk \u0026amp; Co \/ 01 2017-Present \/ SUV (CX11) 2017-Present \/ 01 2.0 Turbo 2017-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on axle stands or a ramp. Remove the factory arm and bolt the Hardrace arm in its place; it comes complete with its bushes or joints fitted, so no press is needed. Set adjustable arms to the same length as the factory parts to start. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Have a full four-wheel alignment done after fitting. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-volvo-xc40-18-lynk-co-01-17-rear-camber-kit-hardened-rubber-2pcs-set\"\u003eHardrace Rear Camber Kit Hardened Rubber 2Pcs Volvo Xc40 18+ Lynk\u0026amp;Co 01 17+\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eYes. Have a full four-wheel alignment done after fitting, and use it to set the adjustable arms to the settings you want.\u003c\/p\u003e\n\u003ch3\u003eDoes it come with the bushes fitted?\u003c\/h3\u003e\n\u003cp\u003eYes. The arm comes complete with its bushes or joints already fitted, so it bolts straight in with no press needed.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eOnly slightly. The hardened rubber is firmer than the factory bushes but still absorbs vibration, so it stays comfortable for everyday driving.\u003c\/p\u003e\n\u003ch3\u003eDoes toe affect stability?\u003c\/h3\u003e\n\u003cp\u003eYes. Rear toe has a big effect on how settled the car feels, especially at speed and under braking, so getting it right makes the car feel more planted.\u003c\/p\u003e\n\u003ch3\u003eHow is toe adjusted?\u003c\/h3\u003e\n\u003cp\u003eTurn the adjuster to change the arm length, then lock it with the lock nut. Set it to the factory length first, then have the toe set on an alignment rig.\u003c\/p\u003e\n\u003ch3\u003eDo I need it on a standard-height car?\u003c\/h3\u003e\n\u003cp\u003eIt is most useful on lowered cars, where it brings the geometry back into spec. On a standard car it still gives firmer location and finer adjustment than the factory parts.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780147671352,"sku":"HR-Q0686","price":179.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0686_main.jpg?v=1678899754"},{"product_id":"hardrace-rear-adjustable-stabilizer-link-2-piece-set-volvo-xc40-18","title":"Hardrace Rear Adjustable Stabiliser Link Volvo XC40 18+","description":"\u003ch2\u003eHardrace Rear Adjustable Drop Links for Volvo XC40 T2\/T3\/D3 (2018-Present) – Adjustable, No Bar Pre-Load\u003c\/h2\u003e\n\u003cp\u003eLowering a car or fitting an uprated anti-roll bar changes the drop link angle, which pre-loads the bar and upsets the balance. These Hardrace rear adjustable drop links adjust in length, so you can set the bar to the right angle with no pre-load. That gives a more consistent, balanced response and lets you fine-tune the handling.\u003c\/p\u003e\n\u003cp\u003eThey use pillow ball joints for precise, play-free movement.\u003c\/p\u003e\n\u003cp\u003eIt suits the Volvo XC40 T2\/T3\/D3 (2018-Present).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable length\u003c\/li\u003e\n\u003cli\u003eRemoves anti-roll bar pre-load on lowered cars\u003c\/li\u003e\n\u003cli\u003eMore balanced, consistent handling\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003ePillow ball joints\u003c\/li\u003e\n\u003cli\u003e2-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear adjustable drop links (2 pieces in total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 1.5 T2 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 1.5 T3 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 2.0 D3 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 2.0 D3 AWD 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 2.0 D4 AWD 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 2.0 T4 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 2.0 T4 AWD 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 2.0 T5 AWD 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 D4 Polestar 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 D4 Polestar AWD 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 T5 AWD 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 T5 Hybrid 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 T5 Polestar AWD 2018-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely, ideally on a ramp so the suspension is loaded. Set the Hardrace links to the length that fits without pulling or pushing the anti-roll bar, so both sides are equal and the bar has no pre-load, then lock the adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. Drop links do not change the alignment.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the length?\u003c\/h3\u003e\n\u003cp\u003eSet them with the car on its wheels so each link fits without moving the anti-roll bar, with both sides the same length. That leaves the bar free of pre-load.\u003c\/p\u003e\n\u003ch3\u003eWill they knock or rattle?\u003c\/h3\u003e\n\u003cp\u003eNot when fitted correctly. Pillow ball joints have no play, and torquing them up with the car on its wheels keeps them quiet.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780147704120,"sku":"HR-Q0452","price":239.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hardrace-part-q0452.jpg?v=1678899754"},{"product_id":"hardrace-front-lower-brace-1-piece-set-volvo-xc40-18","title":"Hardrace Front Lower Brace Volvo XC40 18+","description":"\u003ch2\u003eHardrace Front Lower Brace for Volvo XC40 T2\/T3\/D3 (2018-Present) – Stiffer Chassis, Sharper Handling\u003c\/h2\u003e\n\u003cp\u003eThe floor and lower chassis flex under hard cornering, which lets the suspension geometry move and makes the car feel less precise. This Hardrace front lower brace ties key mounting points under the car together, so the chassis stays stiff and the car feels sharper and more consistent.\u003c\/p\u003e\n\u003cp\u003eIt bolts to existing mounting points with no cutting or drilling.\u003c\/p\u003e\n\u003cp\u003eIt suits the Volvo XC40 T2\/T3\/D3 (2018-Present).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStiffens the lower chassis\u003c\/li\u003e\n\u003cli\u003eReduces body flex under load\u003c\/li\u003e\n\u003cli\u003eSharper, more consistent handling\u003c\/li\u003e\n\u003cli\u003eBolts to existing mounting points\u003c\/li\u003e\n\u003cli\u003eNo cutting or drilling required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront lower brace\u003c\/li\u003e\n\u003cli\u003eFitting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 1.5 T2 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 1.5 T3 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 2.0 D3 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 2.0 D3 AWD 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 2.0 D4 AWD 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 2.0 T4 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 2.0 T4 AWD 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 2.0 T5 AWD 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 D4 Polestar 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 D4 Polestar AWD 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 T5 AWD 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 T5 Hybrid 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 T5 Polestar AWD 2018-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on a ramp or axle stands. Bolt the brace to the existing mounting points under the car and tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No cutting, drilling or alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-volvo-xc40-18-rear-sub-frame-brace-1pcs-set\"\u003eHardrace Rear Sub-Frame Brace 1Pcs Volvo XC40 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-middle-lower-brace-1-piece-set-volvo-xc40-18\"\u003eHardrace Middle Lower Brace 1 Piece Set Volvo XC40 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-front-strut-brace-1-piece-set-volvo-xc40-18\"\u003eHardrace Front Strut Brace 1 Piece Set Volvo XC40 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. The brace does not change the suspension geometry.\u003c\/p\u003e\n\u003ch3\u003eWill it reduce ground clearance?\u003c\/h3\u003e\n\u003cp\u003eIt sits close to the floor or subframe, so it only reduces ground clearance slightly.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eNo. A brace stiffens the chassis, not the suspension, so the ride comfort is largely unchanged.\u003c\/p\u003e\n\u003ch3\u003eCan I fit it with other braces?\u003c\/h3\u003e\n\u003cp\u003eYes. Combining front, middle and rear braces stiffens more of the chassis for an even tighter feel.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780147736888,"sku":"HR-Q0445","price":70.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hardrace-part-q0445.jpg?v=1678899754"},{"product_id":"hardrace-front-strut-brace-1-piece-set-volvo-xc40-18","title":"Hardrace Front Strut Brace Volvo XC40 18+","description":"\u003ch2\u003eHardrace Front Strut Brace for Volvo XC40 T2\/T3\/D3 (2018-Present) – Sharper Steering, Stiffer Front End\u003c\/h2\u003e\n\u003cp\u003eUnder hard cornering the front strut towers flex, which blurs steering feel and lets the suspension geometry shift. This Hardrace front strut brace ties them together, so the front end stays stiff and the steering stays sharp and precise.\u003c\/p\u003e\n\u003cp\u003eIt bolts to existing mounting points with no cutting or drilling.\u003c\/p\u003e\n\u003cp\u003eIt suits the Volvo XC40 T2\/T3\/D3 (2018-Present).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTies the strut towers together\u003c\/li\u003e\n\u003cli\u003eReduces body flex under cornering\u003c\/li\u003e\n\u003cli\u003eSharper, more precise steering\u003c\/li\u003e\n\u003cli\u003eBolts to existing mounting points\u003c\/li\u003e\n\u003cli\u003eNo cutting or drilling required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront strut brace\u003c\/li\u003e\n\u003cli\u003eFitting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 1.5 T2 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 1.5 T3 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 2.0 D3 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 2.0 D3 AWD 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 2.0 D4 AWD 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 2.0 T4 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 2.0 T4 AWD 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 2.0 T5 AWD 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 D4 Polestar 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 D4 Polestar AWD 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 T5 AWD 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 T5 Hybrid 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 T5 Polestar AWD 2018-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eRemove the strut top nuts or mounting bolts, fit the brace over them and refit the nuts. Tighten to the vehicle manufacturer's torque figures with the car on its wheels, then check clearance around the bonnet and engine bay before driving. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-front-lower-brace-1-piece-set-volvo-xc40-18\"\u003eHardrace Front Lower Brace 1 Piece Set Volvo XC40 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-volvo-xc40-18-rear-sub-frame-brace-1pcs-set\"\u003eHardrace Rear Sub-Frame Brace 1Pcs Volvo XC40 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-middle-lower-brace-1-piece-set-volvo-xc40-18\"\u003eHardrace Middle Lower Brace 1 Piece Set Volvo XC40 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. The brace does not change the suspension geometry.\u003c\/p\u003e\n\u003ch3\u003eWill it fit under the bonnet?\u003c\/h3\u003e\n\u003cp\u003eYes, it is designed to fit under the standard bonnet on the listed models. Check clearance around any aftermarket intake or engine parts.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eNo. A brace stiffens the chassis, not the suspension, so the ride comfort is largely unchanged.\u003c\/p\u003e\n\u003ch3\u003eCan I fit it with other braces?\u003c\/h3\u003e\n\u003cp\u003eYes. Combining front, middle and rear braces stiffens more of the chassis for an even tighter feel.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780147769656,"sku":"HR-Q0444","price":159.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hardrace-part-q0444.jpg?v=1678899755"},{"product_id":"hardrace-middle-lower-brace-1-piece-set-volvo-xc40-18","title":"Hardrace Middle Lower Brace Volvo XC40 18+","description":"\u003ch2\u003eHardrace Middle Lower Brace for Volvo XC40 T2\/T3\/D3 (2018-Present) – Stiffer Chassis, Sharper Handling\u003c\/h2\u003e\n\u003cp\u003eThe floor and lower chassis flex under hard cornering, which lets the suspension geometry move and makes the car feel less precise. This Hardrace middle lower brace ties key mounting points under the car together, so the chassis stays stiff and the car feels sharper and more consistent.\u003c\/p\u003e\n\u003cp\u003eIt bolts to existing mounting points with no cutting or drilling.\u003c\/p\u003e\n\u003cp\u003eIt suits the Volvo XC40 T2\/T3\/D3 (2018-Present).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStiffens the lower chassis\u003c\/li\u003e\n\u003cli\u003eReduces body flex under load\u003c\/li\u003e\n\u003cli\u003eSharper, more consistent handling\u003c\/li\u003e\n\u003cli\u003eBolts to existing mounting points\u003c\/li\u003e\n\u003cli\u003eNo cutting or drilling required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMiddle lower brace\u003c\/li\u003e\n\u003cli\u003eFitting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 1.5 T2 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 1.5 T3 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 2.0 D3 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 2.0 D3 AWD 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 2.0 D4 AWD 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 2.0 T4 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 2.0 T4 AWD 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 2.0 T5 AWD 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 D4 Polestar 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 D4 Polestar AWD 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 T5 AWD 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 T5 Hybrid 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 T5 Polestar AWD 2018-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on a ramp or axle stands. Bolt the brace to the existing mounting points under the car and tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No cutting, drilling or alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-front-lower-brace-1-piece-set-volvo-xc40-18\"\u003eHardrace Front Lower Brace 1 Piece Set Volvo XC40 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-volvo-xc40-18-rear-sub-frame-brace-1pcs-set\"\u003eHardrace Rear Sub-Frame Brace 1Pcs Volvo XC40 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-front-strut-brace-1-piece-set-volvo-xc40-18\"\u003eHardrace Front Strut Brace 1 Piece Set Volvo XC40 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. The brace does not change the suspension geometry.\u003c\/p\u003e\n\u003ch3\u003eWill it reduce ground clearance?\u003c\/h3\u003e\n\u003cp\u003eIt sits close to the floor or subframe, so it only reduces ground clearance slightly.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eNo. A brace stiffens the chassis, not the suspension, so the ride comfort is largely unchanged.\u003c\/p\u003e\n\u003ch3\u003eCan I fit it with other braces?\u003c\/h3\u003e\n\u003cp\u003eYes. Combining front, middle and rear braces stiffens more of the chassis for an even tighter feel.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780147802424,"sku":"HR-Q0446","price":88.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hardrace-part-q0446.jpg?v=1678899758"},{"product_id":"hardrace-volvo-xc40-18-rear-sub-frame-brace-1pcs-set","title":"Hardrace Rear Sub-Frame Brace Volvo XC40 18+","description":"\u003ch2\u003eHardrace Rear Sub Frame Brace for Volvo XC40 T2\/T3\/D3 (2018-Present) – Stiffer Chassis, Sharper Handling\u003c\/h2\u003e\n\u003cp\u003eThe floor and lower chassis flex under hard cornering, which lets the suspension geometry move and makes the car feel less precise. This Hardrace rear sub frame brace ties key mounting points under the car together, so the chassis stays stiff and the car feels sharper and more consistent.\u003c\/p\u003e\n\u003cp\u003eIt bolts to existing mounting points with no cutting or drilling.\u003c\/p\u003e\n\u003cp\u003eIt suits the Volvo XC40 T2\/T3\/D3 (2018-Present).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStiffens the lower chassis\u003c\/li\u003e\n\u003cli\u003eReduces body flex under load\u003c\/li\u003e\n\u003cli\u003eSharper, more consistent handling\u003c\/li\u003e\n\u003cli\u003eBolts to existing mounting points\u003c\/li\u003e\n\u003cli\u003eNo cutting or drilling required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRear sub frame brace\u003c\/li\u003e\n\u003cli\u003eFitting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 1.5 T2 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 1.5 T3 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 2.0 D3 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 2.0 D3 AWD 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 2.0 D4 AWD 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 2.0 T4 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 2.0 T4 AWD 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 2.0 T5 AWD 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 D4 Polestar 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 D4 Polestar AWD 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 T5 AWD 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 T5 Hybrid 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 T5 Polestar AWD 2018-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on a ramp or axle stands. Bolt the brace to the existing mounting points under the car and tighten all fixings to the vehicle manufacturer's torque figures with the car on its wheels. No cutting, drilling or alignment is needed. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-front-lower-brace-1-piece-set-volvo-xc40-18\"\u003eHardrace Front Lower Brace 1 Piece Set Volvo XC40 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-middle-lower-brace-1-piece-set-volvo-xc40-18\"\u003eHardrace Middle Lower Brace 1 Piece Set Volvo XC40 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-front-strut-brace-1-piece-set-volvo-xc40-18\"\u003eHardrace Front Strut Brace 1 Piece Set Volvo XC40 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. The brace does not change the suspension geometry.\u003c\/p\u003e\n\u003ch3\u003eWill it reduce ground clearance?\u003c\/h3\u003e\n\u003cp\u003eIt sits close to the floor or subframe, so it only reduces ground clearance slightly.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eNo. A brace stiffens the chassis, not the suspension, so the ride comfort is largely unchanged.\u003c\/p\u003e\n\u003ch3\u003eCan I fit it with other braces?\u003c\/h3\u003e\n\u003cp\u003eYes. Combining front, middle and rear braces stiffens more of the chassis for an even tighter feel.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780147835192,"sku":"HR-Q0447","price":70.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/Q0447_main.jpg?v=1678899758"},{"product_id":"hardrace-rear-anti-roll-bar-28mm-5-piece-set-volvo-xc40-18","title":"Hardrace Rear Anti Roll Bar 28mm Volvo Xc40 18+","description":"\u003ch2\u003eHardrace 28mm Adjustable Rear Anti Roll Bar for Volvo XC40 T2\/T3\/D3 (2018-Present) – Flatter Cornering, Sharper Response\u003c\/h2\u003e\n\u003cp\u003eThe factory rear anti-roll bar is soft, so the car leans and pushes wide in corners. This Hardrace 28mm rear anti-roll bar is a stiffer upgrade that cuts rear body roll, which reduces understeer and helps the car rotate into corners.\u003c\/p\u003e\n\u003cp\u003eThe hollow design adds stiffness without adding much weight. It is heat treated for strength. It has 2-way adjustment, so you can fine-tune the roll stiffness to suit the road or track. It comes with mounting bushes.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e28mm rear bar for reduced body roll\u003c\/li\u003e\n\u003cli\u003eReduces understeer and helps the car rotate\u003c\/li\u003e\n\u003cli\u003e2-way adjustable roll stiffness\u003c\/li\u003e\n\u003cli\u003eHollow design for stiffness without excess weight\u003c\/li\u003e\n\u003cli\u003eHeat treated for strength\u003c\/li\u003e\n\u003cli\u003eMounting bushes included\u003c\/li\u003e\n\u003cli\u003eBolts to the factory mounting points\u003c\/li\u003e\n\u003cli\u003e5-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e28mm rear anti-roll bar\u003c\/li\u003e\n\u003cli\u003eMounting bushes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e5 pieces in total.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 1.5 T2 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 1.5 T3 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 2.0 D3 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 2.0 T4 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 D4 Polestar 2018-Present\u003c\/li\u003e\n\u003cli\u003eVolvo \/ XC40 2018-Present \/ SUV 2018-Present \/ XC40 T5 Hybrid 2018-Present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e For FWD models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e models other than those listed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSupport the car safely on a ramp or axle stands. Undo the drop links and bush brackets and remove the factory bar. Fit the Hardrace bar with its bushes, refit the brackets and links, and tighten everything to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. Set both ends to the same adjustment hole to start. No wheel alignment is needed for the bar alone. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eUpgrade Further\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hardrace-rear-adjustable-stabilizer-link-2-piece-set-volvo-xc40-18\"\u003eHardrace Rear Adjustable Stabilizer Link 2 Piece Set Volvo XC40 18+\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDo I need an alignment after fitting?\u003c\/h3\u003e\n\u003cp\u003eNo. An anti-roll bar does not change camber, toe or caster. You only need an alignment if you change the ride height at the same time.\u003c\/p\u003e\n\u003ch3\u003eWill it make the ride harsher?\u003c\/h3\u003e\n\u003cp\u003eA stiffer bar is felt mainly in corners and over bumps that hit one side of the car. Over bumps that hit both wheels evenly, the ride is largely unchanged.\u003c\/p\u003e\n\u003ch3\u003eWhich setting should I start on?\u003c\/h3\u003e\n\u003cp\u003eStart on the softest setting with both ends set the same, then go firmer if you want less roll.\u003c\/p\u003e\n\u003ch3\u003eCan I use my standard drop links?\u003c\/h3\u003e\n\u003cp\u003eYes. On a lowered car, adjustable drop links let you set the bar level at rest, so it is not pre-loaded.\u003c\/p\u003e\n\u003ch3\u003eShould I upgrade the front bar too?\u003c\/h3\u003e\n\u003cp\u003eUpgrading both ends cuts roll at both axles while keeping the balance closer to standard. Upgrading one end only shifts the balance: a stiffer front adds understeer, a stiffer rear adds oversteer.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs it road legal?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.\u003c\/p\u003e\n\u003ch3\u003eIs it covered by a warranty?\u003c\/h3\u003e\n\u003cp\u003eYes, Hardrace parts are covered against defects in materials and workmanship.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780147867960,"sku":"HR-Q0481","price":248.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hardrace-part-q0481.jpg?v=1678899758"},{"product_id":"hardrace-replacement-rubber-bushing-for-8191-8225-1pcs-set","title":"Hardrace Replacement Rubber Bushing For #8191\/8225 1Pcs","description":"\u003ch2\u003eHardrace Replacement Bushes for HR-8191 – Genuine Hardrace Spare Part\u003c\/h2\u003e\n\u003cp\u003eThis is a genuine Hardrace replacement bushes for the Hardrace HR-8191. It lets you refresh the bushes on your Hardrace part without buying a whole new kit, so it keeps working as precisely as the day it was fitted.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGenuine Hardrace spare part\u003c\/li\u003e\n\u003cli\u003eMade for the Hardrace HR-8191\u003c\/li\u003e\n\u003cli\u003eRefreshes your Hardrace part without a full new kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReplacement bushes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFor the Hardrace HR-8191 only.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eRemove the Hardrace part from the car, take out the old bushes and fit the new one in its place. Refit the part and tighten all fixings to the vehicle manufacturer's torque figures. Have the alignment checked if the part affects the suspension geometry. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it fit the factory parts?\u003c\/h3\u003e\n\u003cp\u003eNo. It is made for the Hardrace HR-8191 only.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780149768504,"sku":"HR-RP-BS016","price":10.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hardrace-placeholder_a210a084-f907-4714-afb9-a7d97e5effb5.jpg?v=1678899788"},{"product_id":"hardrace-replacement-bushing-for-8571-q0009-2pcs-set","title":"Hardrace Replacement Bushing For #8571\/#Q0009 2Pcs","description":"\u003ch2\u003eHardrace Replacement Bushes for HR-8571, HR-Q0009 – Genuine Hardrace Spare Part\u003c\/h2\u003e\n\u003cp\u003eThis is a genuine Hardrace replacement bushes for the Hardrace HR-8571, HR-Q0009. It lets you refresh the bushes on your Hardrace part without buying a whole new kit, so it keeps working as precisely as the day it was fitted.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGenuine Hardrace spare part\u003c\/li\u003e\n\u003cli\u003eMade for the Hardrace HR-8571, HR-Q0009\u003c\/li\u003e\n\u003cli\u003eRefreshes your Hardrace part without a full new kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReplacement bushes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFor the Hardrace HR-8571, HR-Q0009 only.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eRemove the Hardrace part from the car, take out the old bushes and fit the new one in its place. Refit the part and tighten all fixings to the vehicle manufacturer's torque figures. Have the alignment checked if the part affects the suspension geometry. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it fit the factory parts?\u003c\/h3\u003e\n\u003cp\u003eNo. It is made for the Hardrace HR-8571, HR-Q0009 only.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780151800120,"sku":"HR-RP-8571-BS","price":35.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hardrace-placeholder_71f0d6b0-4131-49f0-b87b-11af5572eb42.jpg?v=1678899813"},{"product_id":"hardrace-replacement-bushing-for-6697-rear-arm-1pcs-set","title":"Hardrace Replacement Bushing For #6697 Rear Arm 1Pcs","description":"\u003ch2\u003eHardrace Replacement Bushes for HR-6697 – Genuine Hardrace Spare Part\u003c\/h2\u003e\n\u003cp\u003eThis is a genuine Hardrace replacement bushes for the Hardrace HR-6697. It lets you refresh the bushes on your Hardrace part without buying a whole new kit, so it keeps working as precisely as the day it was fitted.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGenuine Hardrace spare part\u003c\/li\u003e\n\u003cli\u003eMade for the Hardrace HR-6697\u003c\/li\u003e\n\u003cli\u003eRefreshes your Hardrace part without a full new kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReplacement bushes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFor the Hardrace HR-6697 only.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eRemove the Hardrace part from the car, take out the old bushes and fit the new one in its place. Refit the part and tighten all fixings to the vehicle manufacturer's torque figures. Have the alignment checked if the part affects the suspension geometry. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it fit the factory parts?\u003c\/h3\u003e\n\u003cp\u003eNo. It is made for the Hardrace HR-6697 only.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780152160568,"sku":"HR-RP-6697-RR-BS","price":10.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hardrace-placeholder_a780c47f-3aa7-40c8-98fb-c91390de9fcd.jpg?v=1678899821"},{"product_id":"hardrace-replacement-bushing-for-6724-2pcs-set","title":"Hardrace Replacement Bushing For #6724 2Pcs","description":"\u003ch2\u003eHardrace Replacement Bushes for HR-6724 – Genuine Hardrace Spare Part\u003c\/h2\u003e\n\u003cp\u003eThis is a genuine Hardrace replacement bushes for the Hardrace HR-6724. It lets you refresh the bushes on your Hardrace part without buying a whole new kit, so it keeps working as precisely as the day it was fitted.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGenuine Hardrace spare part\u003c\/li\u003e\n\u003cli\u003eMade for the Hardrace HR-6724\u003c\/li\u003e\n\u003cli\u003eRefreshes your Hardrace part without a full new kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReplacement bushes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFor the Hardrace HR-6724 only.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eRemove the Hardrace part from the car, take out the old bushes and fit the new one in its place. Refit the part and tighten all fixings to the vehicle manufacturer's torque figures. Have the alignment checked if the part affects the suspension geometry. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it fit the factory parts?\u003c\/h3\u003e\n\u003cp\u003eNo. It is made for the Hardrace HR-6724 only.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780152193336,"sku":"HR-RP-6724-BS","price":21.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hardrace-placeholder_767202f5-52bc-4984-87d5-1e6067d154b0.jpg?v=1678899821"},{"product_id":"hardrace-replacement-bushing-for-6756-1pc-set","title":"Hardrace Replacement Bushing For #6756 1Pc\/Set","description":"\u003ch2\u003eHardrace Replacement Bushes for HR-6756 – Genuine Hardrace Spare Part\u003c\/h2\u003e\n\u003cp\u003eThis is a genuine Hardrace replacement bushes for the Hardrace HR-6756. It lets you refresh the bushes on your Hardrace part without buying a whole new kit, so it keeps working as precisely as the day it was fitted.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGenuine Hardrace spare part\u003c\/li\u003e\n\u003cli\u003eMade for the Hardrace HR-6756\u003c\/li\u003e\n\u003cli\u003eRefreshes your Hardrace part without a full new kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReplacement bushes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFor the Hardrace HR-6756 only.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eRemove the Hardrace part from the car, take out the old bushes and fit the new one in its place. Refit the part and tighten all fixings to the vehicle manufacturer's torque figures. Have the alignment checked if the part affects the suspension geometry. We recommend professional fitting.\u003c\/p\u003e\n\u003ch3\u003eWill it fit the factory parts?\u003c\/h3\u003e\n\u003cp\u003eNo. It is made for the Hardrace HR-6756 only.\u003c\/p\u003e\n\u003ch3\u003eIs it a genuine Hardrace part?\u003c\/h3\u003e\n\u003cp\u003eYes, we are a UK Hardrace stockist and supply genuine Hardrace parts.\u003c\/p\u003e","brand":"Hardrace","offers":[{"title":"Default Title","offer_id":44780152226104,"sku":"HR-RP-6756-BS","price":10.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/9883\/0904\/products\/hardrace-placeholder_ed44123a-f166-4dfe-a364-dafed415209b.jpg?v=1678899822"}],"url":"https:\/\/hardraceshop.com\/collections\/hardrace-volvo-xc40-suspension-parts.oembed","provider":"Hardrace Shop","version":"1.0","type":"link"}