Hardrace 22mm Front Anti Roll Bar 3Pc Set Ford Tierra 98-03

Save 15%
HardraceSKU: HR-8993

Price:
Sale price£174.68 Regular price£205.51

Inc VAT

Technical Info

Description

Hardrace 22mm Front Anti Roll Bar for Mazda 323 BJ (1998-2003) and Mazda Premacy CP (1999-2005) – Flatter Cornering, Sharper Response

The factory front anti-roll bar is built for comfort, so the car leans in corners and the steering feels slow to respond. This Hardrace 22mm front anti-roll bar is a stiffer upgrade that cuts body roll, so the car sits flatter, turns in more crisply and feels more composed through quick changes of direction.

Key Features

  • 22mm front bar for reduced body roll
  • Sharper turn-in and flatter cornering
  • Bolts to the factory mounting points

What's in the Kit?

  • 22mm front anti-roll bar

Fitment

  • Mazda / 323 (8th Gen) 1998-2003 / Hatchback (BJ) 1998-2003 / 323 1.3 1998-2003
  • Mazda / 323 (8th Gen) 1998-2003 / Hatchback (BJ) 1998-2003 / 323 1.5 1998-2001
  • Mazda / 323 (8th Gen) 1998-2003 / Hatchback (BJ) 1998-2003 / 323 1.6 2001-2003
  • Mazda / 323 (8th Gen) 1998-2003 / Hatchback (BJ) 1998-2003 / 323 1.8 1998-2001
  • Mazda / 323 (8th Gen) 1998-2003 / Hatchback (BJ) 1998-2003 / 323 2.0 2001-2003
  • Mazda / 323 (8th Gen) 1998-2003 / Hatchback (BJ) 1998-2003 / 323 2.0 D 1998-2001
  • Mazda / 323 (8th Gen) 1998-2003 / Hatchback (BJ) 1998-2003 / 323 2.0 TD 1998-2003
  • Mazda / 323 (8th Gen) 1998-2003 / Sedan (BJ) 1998-2003 / 323 1.3 1998-2003
  • Mazda / 323 (8th Gen) 1998-2003 / Sedan (BJ) 1998-2003 / 323 1.5 1998-2001
  • Mazda / 323 (8th Gen) 1998-2003 / Sedan (BJ) 1998-2003 / 323 1.6 2001-2003
  • Mazda / 323 (8th Gen) 1998-2003 / Sedan (BJ) 1998-2003 / 323 1.8 1998-2001
  • Mazda / 323 (8th Gen) 1998-2003 / Sedan (BJ) 1998-2003 / 323 2.0 D 1998-2001
  • Mazda / 323 (8th Gen) 1998-2003 / Sedan (BJ) 1998-2003 / 323 2.0 TD 1998-2003
  • Mazda / Premacy (1st Gen) 1999-2005 / MPV (CP) (5 Seat) 1999-2005 / Premacy 1.8 1999-2001
  • Mazda / Premacy (1st Gen) 1999-2005 / MPV (CP) (5 Seat) 1999-2005 / Premacy 1.8 2001-2005
  • Mazda / Premacy (1st Gen) 1999-2005 / MPV (CP) (5 Seat) 1999-2005 / Premacy 2.0 2001-2005
  • Mazda / Premacy (1st Gen) 1999-2005 / MPV (CP) (5 Seat) 1999-2005 / Premacy 2.0 TD 1999-2001
  • Mazda / Premacy (1st Gen) 1999-2005 / MPV (CP) (5 Seat) 1999-2005 / Premacy 2.0 TD 2001-2005
  • Mazda / Premacy (1st Gen) 1999-2005 / MPV (CP) (7 Seat) 2001-2005 / Premacy 2.0 2001-2005
  • Mazda / Premacy (1st Gen) 1999-2005 / MPV (CP) (7 Seat) 2001-2005 / Premacy 2.0 TD 2001-2005

Not suitable for: models other than those listed.

Installation

Support the car safely on a ramp or axle stands. Undo the drop links and bush brackets and remove the factory bar. Fit the Hardrace bar with its bushes, refit the brackets and links, and tighten everything to the vehicle manufacturer's torque figures with the car on its wheels at normal ride height, so the bushes aren't pre-loaded. No wheel alignment is needed for the bar alone. We recommend professional fitting.

Do I need an alignment after fitting?

No. An anti-roll bar does not change camber, toe or caster. You only need an alignment if you change the ride height at the same time.

Will it make the ride harsher?

A stiffer bar is felt mainly in corners and over bumps that hit one side of the car. Over bumps that hit both wheels evenly, the ride is largely unchanged.

Can I use my standard drop links?

Yes. On a lowered car, adjustable drop links let you set the bar level at rest, so it is not pre-loaded.

Should I upgrade the rear bar too?

Upgrading both ends cuts roll at both axles while keeping the balance closer to standard. Upgrading one end only shifts the balance: a stiffer front adds understeer, a stiffer rear adds oversteer.

Will it fit my car?

It is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.

Is it road legal?

Yes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.

Is it covered by a warranty?

Yes, Hardrace parts are covered against defects in materials and workmanship.

Is it a genuine Hardrace part?

Yes, we are a UK Hardrace stockist and supply genuine Hardrace parts.

The warranty on Hardrace products depends on the type of product, with a minimum warranty period of 2 years. This warranty does not cover damage caused by a car crash, improper use, negligence or normal wear and tear.

Rubber bushes 5 years
Spherical bushes 2 years
Adjustable arms with rubber inserts 5 years
Adjustable arms with spherical inserts 2 years
Engine mounts 5 years
Sway bars Lifetime warranty
Bushes and endlinks 5 years
Billet inserts Lifetime warranty
Chassis brace Lifetime warranty
Ball joints/tie rods 2 years

Why Buy From Us?

Worldwide shipping
1000's of items in stock
Multiple payment options
14 day returns period

Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Maestro Mastercard PayPal Shop Pay Union Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Price Match Request

Related items

Recently viewed