Technical Info
Description
Hardrace 28mm Front Anti-Roll Bar for Hyundai Tucson Kia Sportage – Uprated Direct-Fit Upgrade
Body roll in corners shifts weight onto the outside tyres and slows the car's response. This Hardrace 28mm front anti-roll bar is thicker and stiffer than the standard bar, so the Hyundai Tucson and Kia Sportage stays flatter through bends and turns in more sharply.
It is made from solid spring steel with a hard-wearing coating, and comes with uprated bushes and the fittings needed to bolt it to the factory mounting points.
Key Features
- 28mm solid steel front anti-roll bar
- Reduces body roll for flatter cornering
- Sharper turn-in and steering response
- Supplied with uprated bushes and brackets
- Bolts to the factory mounting points
- Hard-wearing coated finish
What's in the Kit?
- 1 x 28mm front anti-roll bar
- Bushes and brackets
Fitment
- Hyundai Tucson (2020 on) and Kia Sportage (2021 on)
Not suitable for: earlier Tucson or Sportage models.
Installation
The front anti-roll bar replaces the standard bar using the factory mounting points. Support the car safely on axle stands, remove the standard bar and drop links, fit the new bar with the supplied bushes, then torque everything to the manufacturer's figures with the car on its wheels. We recommend professional fitting.
Will it make the ride harsher?
Ride comfort over bumps is barely affected because the bar mainly works when the body rolls. You will feel a flatter, more controlled car in corners.
Do I need new drop links?
Your standard drop links can normally be reused if they are in good condition. Worn links are worth replacing at the same time.
Does it need an alignment?
No, an anti-roll bar does not change the alignment settings.
Is it road legal?
Yes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.
Will it fit my car?
It is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.
Is it covered by a warranty?
Yes, hardrace parts are covered against defects in materials and workmanship.
The warranty on Hardrace products depends on the type of product, with a minimum warranty period of 2 years. This warranty does not cover damage caused by a car crash, improper use, negligence or normal wear and tear.
| Rubber bushes | 5 years |
| Spherical bushes | 2 years |
| Adjustable arms with rubber inserts | 5 years |
| Adjustable arms with spherical inserts | 2 years |
| Engine mounts | 5 years |
| Sway bars | Lifetime warranty |
| Bushes and endlinks | 5 years |
| Billet inserts | Lifetime warranty |
| Chassis brace | Lifetime warranty |
| Ball joints/tie rods | 2 years |
Why Buy From Us?
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
