Technical Info
Description
Hardrace Rear Camber Kit for Toyota Mark x / reiz 1st GRX120 2004-2009 and Toyota Mark x / reiz 2nd GRX13x 2009-2019 and more
Hardrace's rear camber kit for the Toyota Mark x / reiz 1st GRX120 2004-2009 and Toyota Mark x / reiz 2nd GRX13x 2009-2019 and more. It's the fix for uneven tyre wear on lowered cars, and lets you tune grip for road or track.
Built by Hardrace, the Taiwanese suspension specialist, as a quality upgrade over the factory part, with spherical bearing construction.
Key Features
- Adjustable camber
- Corrects camber after lowering
- Helps even out tyre wear
- Tune grip for road or track
- Bolt-on replacement for the standard parts
- Complete 2-piece set
What's in the Kit?
- Camber kit (2 pieces in total)
Fitment
- Toyota Mark x / reiz 1st GRX120 2004-2009
- Toyota Mark x / reiz 2nd GRX13x 2009-2019
- Toyota Crown majesta URS 20#/18# 04-09
- Toyota Crown GRS 18# / 20# / GWS204 2003-2012
- Toyota Crown AWS 21# 2012-2018
- Lexus IS 2nd XE20 2006-2013
- Lexus GS 3rd GRS19 2006-2011
Not suitable for: models other than those listed.
Installation
Replace the standard arms with the Hardrace kit, set them to the original length to start, then have camber set. Tighten all fixings to the vehicle manufacturer's torque figures with the suspension loaded at normal ride height. Have a full four-wheel alignment done after fitting. We recommend professional fitting.
Upgrade Further
- Hardrace Adjustable Rear Strut Arms With Spherical Bearings 2Pc Set Lexus IS250 IS350 Toyo
- Hardrace Adjustable Rear Upper Arms With Spherical Bearings 2Pc Set Lexus IS250 IS350 Toyo
- Hardrace Adjustable Rear Toe Control Arms With Spherical Bearings 2Pc Set Lexus IS250 IS35
Do I need an alignment?
Yes, camber and toe must be set by a full alignment after fitting.
Do I need this if my car is lowered?
If your tyres are wearing on the inner edge after lowering, a camber kit lets you correct it.
How much camber should I run?
For road use a small amount of negative camber is usual. Your alignment centre can advise for your setup.
Will it fit my car?
It is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.
Is it road legal?
Yes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.
Is it covered by a warranty?
Yes, Hardrace parts are covered against defects in materials and workmanship.
Is it a genuine Hardrace part?
Yes, we are a UK Hardrace stockist and supply genuine Hardrace parts.
The warranty on Hardrace products depends on the type of product, with a minimum warranty period of 2 years. This warranty does not cover damage caused by a car crash, improper use, negligence or normal wear and tear.
| Rubber bushes | 5 years |
| Spherical bushes | 2 years |
| Adjustable arms with rubber inserts | 5 years |
| Adjustable arms with spherical inserts | 2 years |
| Engine mounts | 5 years |
| Sway bars | Lifetime warranty |
| Bushes and endlinks | 5 years |
| Billet inserts | Lifetime warranty |
| Chassis brace | Lifetime warranty |
| Ball joints/tie rods | 2 years |
Why Buy From Us?
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
