Technical Info
Description
Hardrace Uprated Tie Rod Ends for Ford Focus DA/DB/DB3 (2004-2011) – Precise, Play-Free Steering
The tie rod ends link the steering to the hubs, so play here shows up as vague, wandering steering. These Hardrace uprated tie rod ends are an upgrade built to the factory pattern, with stronger construction for precise, play-free steering.
It suits the Ford Focus DA/DB/DB3 (2004-2011).
Key Features
- Stronger than the factory tie rod ends
- Precise, play-free steering
- 2-piece set
What's in the Kit?
- Uprated tie rod ends (2 pieces in total)
Fitment
- Ford / Focus (2nd Gen) 2004-2011 / Hatchback (DA/HCP) 2004-2011 / Focus 1.4 2004-2011
- Ford / Focus (2nd Gen) 2004-2011 / Hatchback (DA/HCP) 2004-2011 / Focus 1.6 2004-2011
- Ford / Focus (2nd Gen) 2004-2011 / Hatchback (DA/HCP) 2004-2011 / Focus 1.6 TD 2004-2011
- Ford / Focus (2nd Gen) 2004-2011 / Hatchback (DA/HCP) 2004-2011 / Focus 1.8 2004-2011
- Ford / Focus (2nd Gen) 2004-2011 / Hatchback (DA/HCP) 2004-2011 / Focus 1.8 TD 2004-2011
- Ford / Focus (2nd Gen) 2004-2011 / Hatchback (DA/HCP) 2004-2011 / Focus 2.0 2004-2011
- Ford / Focus (2nd Gen) 2004-2011 / Hatchback (DA/HCP) 2004-2011 / Focus 2.0 TD 2004-2011
- Ford / Focus (2nd Gen) 2004-2011 / Hatchback (DA/HCP) 2004-2011 / Focus RS 2.5 Turbo (305HP/224KW) 2009-2011
- Ford / Focus (2nd Gen) 2004-2011 / Hatchback (DA/HCP) 2004-2011 / Focus RS500 2.5 Turbo (350HP/257KW) 2010-2011
- Ford / Focus (2nd Gen) 2004-2011 / Hatchback (DA/HCP) 2004-2011 / Focus ST 2.5 Turbo 2005-2011
- Ford / Focus (2nd Gen) 2004-2011 / Sedan (DB) 2005-2011 / Focus Sedan 1.4 2005-2011
- Ford / Focus (2nd Gen) 2004-2011 / Sedan (DB) 2005-2011 / Focus Sedan 1.6 2005-2011
- Ford / Focus (2nd Gen) 2004-2011 / Sedan (DB) 2005-2011 / Focus Sedan 1.6 TD 2005-2011
- Ford / Focus (2nd Gen) 2004-2011 / Sedan (DB) 2005-2011 / Focus Sedan 1.8 TD 2005-2011
- Ford / Focus (2nd Gen) 2004-2011 / Sedan (DB) 2005-2011 / Focus Sedan 2.0 2005-2011
- Ford / Focus (2nd Gen) 2004-2011 / Sedan (DB) 2005-2011 / Focus Sedan 2.0 TD 2005-2011
- Ford / Focus (2nd Gen) 2004-2011 / Wagon (DA) 2005-2011 / Focus Turnier 1.4 2005-2011
- Ford / Focus (2nd Gen) 2004-2011 / Wagon (DA) 2005-2011 / Focus Turnier 1.6 2005-2011
- Ford / Focus (2nd Gen) 2004-2011 / Wagon (DA) 2005-2011 / Focus Turnier 1.6 TD 2005-2011
- Ford / Focus (2nd Gen) 2004-2011 / Wagon (DA) 2005-2011 / Focus Turnier 1.8 2005-2011
- Ford / Focus (2nd Gen) 2004-2011 / Wagon (DA) 2005-2011 / Focus Turnier 1.8 TD 2005-2011
- Ford / Focus (2nd Gen) 2004-2011 / Wagon (DA) 2005-2011 / Focus Turnier 2.0 2005-2011
- Ford / Focus (2nd Gen) 2004-2011 / Wagon (DA) 2005-2011 / Focus Turnier 2.0 TD 2005-2011
- Ford / Focus (2nd Gen) 2004-2011 / Convertible (DB3) 2006-2011 / Focus CC 1.6 2006-2011
- Ford / Focus (2nd Gen) 2004-2011 / Convertible (DB3) 2006-2011 / Focus CC 2.0 2006-2011
- Ford / Focus (2nd Gen) 2004-2011 / Convertible (DB3) 2006-2011 / Focus CC 2.0 TD 2006-2011
Not suitable for: models other than those listed.
Installation
Support the car safely and remove the wheel. Note the position of the factory part, then undo the lock nut, separate the tie rod end from the hub with a proper splitter and unscrew it. Fit the Hardrace part, tighten all fixings to the vehicle manufacturer's torque figures, and have the front tracking set straight away. We recommend professional fitting.
Upgrade Further
Do I need an alignment?
Yes, have the front tracking set straight after fitting.
Do they fit the factory tie rods?
Yes, unless a note in the Fitment section says otherwise. They are built to the factory pattern.
Will it fit my car?
It is listed for the models in the Fitment section. If your car has a different engine, drive layout or market spec, check with us before ordering.
Is it road legal?
Yes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.
Is it covered by a warranty?
Yes, Hardrace parts are covered against defects in materials and workmanship.
Is it a genuine Hardrace part?
Yes, we are a UK Hardrace stockist and supply genuine Hardrace parts.
The warranty on Hardrace products depends on the type of product, with a minimum warranty period of 2 years. This warranty does not cover damage caused by a car crash, improper use, negligence or normal wear and tear.
| Rubber bushes | 5 years |
| Spherical bushes | 2 years |
| Adjustable arms with rubber inserts | 5 years |
| Adjustable arms with spherical inserts | 2 years |
| Engine mounts | 5 years |
| Sway bars | Lifetime warranty |
| Bushes and endlinks | 5 years |
| Billet inserts | Lifetime warranty |
| Chassis brace | Lifetime warranty |
| Ball joints/tie rods | 2 years |
Why Buy From Us?
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
