Technical Info
Description
Hardrace Rear Roll Centre Adjuster for Mitsubishi 3000GT/GTO Z11A/Z15A/Z16A 1990-2000
Hardrace's rear roll centre adjuster for the Mitsubishi 3000GT/GTO Z11A/Z15A/Z16A 1990-2000. It's one of the most effective upgrades for a lowered car's front-end feel.
Built by Hardrace, the Taiwanese suspension specialist, as a quality upgrade over the factory part.
Key Features
- Restores roll centre geometry on lowered cars
- Reduces body roll and bump steer
- Sharper turn-in
- Direct replacement for the standard ball joint
- Ideal with coilovers or lowering springs
- Complete 2-piece set
What's in the Kit?
- Roll centre adjuster (2 pieces in total)
Fitment
- Mitsubishi 3000GT/GTO Z11A/Z15A/Z16A 1990-2000
Not suitable for: models other than those listed. Not recommended for vehicles that are lowered less than 2 inches, nor without enough suspension angle altered. Depending on the suspension setup, installing roll centre may change vehicle height. Wheel alignment is required after install.
Installation
Replace the standard ball joints with the Hardrace adjusters. Tighten all fixings to the vehicle manufacturer's torque figures with the suspension loaded at normal ride height. Have a full four-wheel alignment done after fitting. We recommend professional fitting.
Upgrade Further
Will it change my ride height?
It can slightly, depending on your setup. Check ride height after fitting and have an alignment done.
Do I need this on a standard-height car?
No. It is designed for lowered cars, where the roll centre has dropped.
Do I need an alignment?
Yes, always have an alignment after changing ball joints.
How much should my car be lowered to need these?
They are most useful once a car is lowered noticeably, typically 30mm or more.
Will it fit my car?
It is listed for the models in the Fitment section. Not recommended for vehicles that are lowered less than 2 inches, nor without enough suspension angle altered. Depending on the suspension setup, installing roll centre may change vehicle height. Wheel alignment is required after install.
Is it road legal?
Yes, it is a bolt-on part for road and track use. Tell your insurer about any modifications.
Is it covered by a warranty?
Yes, Hardrace parts are covered against defects in materials and workmanship.
Is it a genuine Hardrace part?
Yes, we are a UK Hardrace stockist and supply genuine Hardrace parts.
The warranty on Hardrace products depends on the type of product, with a minimum warranty period of 2 years. This warranty does not cover damage caused by a car crash, improper use, negligence or normal wear and tear.
| Rubber bushes | 5 years |
| Spherical bushes | 2 years |
| Adjustable arms with rubber inserts | 5 years |
| Adjustable arms with spherical inserts | 2 years |
| Engine mounts | 5 years |
| Sway bars | Lifetime warranty |
| Bushes and endlinks | 5 years |
| Billet inserts | Lifetime warranty |
| Chassis brace | Lifetime warranty |
| Ball joints/tie rods | 2 years |
Why Buy From Us?
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
